Answer:
Neutrons
Explanation:
Protons have a positive (+) charge.
Electrons have a negative (-) charge.
Neutrons have a neutral (0) charge.
Answer: neutrons
The components of an atom that have no charge are neutrons. Neutrons have a neutral charge, which means it has no charge. It is not positive or negative. The answer is neutrons.
A piece of wood that measures 2.7 cm x 5.5 cm x 3.9 cm has a mass of 84 g what is the density of the wood
The density of the wood : 1.45 g/cm³
Further explanationDensity is a quantity derived from the mass and volume
Density is the ratio of mass per unit volume
With the same mass, the volume of objects that have a high density will be smaller than objects with a smaller type of density
The unit of density can be expressed in g/cm³ or kg/m³
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
Volume of the wood[tex]\tt V=2.7\times 5.5\times 3.9=57.915~cm^3[/tex]
density[tex]\tt \rho=\dfrac{m}{V}\\\\\rho=\dfrac{84~g}{57.915~cm^3}=\boxed{\bold{1.45`g/cm^3}}[/tex]
According to Maslow's hierarchy of needs, the basic needs are what we call physiological or biological needs. The survival of the individual relies on these basic needs. Looking at it this way, before you can meet any of the needs going up the hierarchy, one needs to be healthy or at least functional optimally to even get started. All other needs are considered secondary until the basic needs have been me
Answer:
True
Explanation:
|ndeed, Psychologist Abraham Maslow's sought to describe hierarchy in which the average (or most) humans place their needs. In other words, he believes we as humans have basic needs which we long to satisfy.
On the ranking or hierarchy, according to Maslow the need humans satisfy first is their physiological need. Here's the full hierarchy:
Physiological Needs
↓
Safety Needs
↓
Love/Belonging Needs
↓
Esteem Needs
↓
Self-Actualization
A foam square has a mass of 25 g and a volume of 90 mL. What is the density?
Answer:
The answer is 0.28 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
So we have
[tex]density = \frac{25}{90} = \frac{5}{18} \\ = 0.277777...[/tex]
We have the final answer as
0.28 g/mLHope this helps you
Two liters of hydrogen gas are stored at a
pressure of 100 kPa. If the temperature
does not change, what will the volume
of the gas be when the pressure is
decreased to 25 kPa?
Answer:
the volume will expand
Explanation:
gas under pressure contracts, and expands with a lesser pressure
The volume of the hydrogen gas at 25 kPa is 8 Liters.
Explanation:
Given:
At constant temperature, 2 liters of hydrogen gas at 100kPa pressure.
To find:
The volume of the hydrogen gas at 25kPa.
Solution:
The initial pressure of the hydrogen gas =[tex]P_1=100 kPa[/tex]
The initial volume of the hydrogen gas at 100 kPa =[tex]V_1=2 L[/tex]
The final pressure of the hydrogen gas =[tex]P_2=25 kPa[/tex]
The final volume of the hydrogen gas at 25kPa = [tex]V_2=?[/tex]
Using Boyles law:
[tex]P_1V_1=P_2V_2\\100kPa\times 2 L=25 kPa\times V_2\\V_2=\frac{100 kPa\times 2L}{25 kPa}=8L[/tex]
The volume of the hydrogen gas at 25 kPa is 8 Liters.
Learn more about Boyles law here:
brainly.com/question/12835309?referrer=searchResults
brainly.com/question/1437490?referrer=searchResults
Xenon is an element similar to Neon. Its density can be found on the Reference Table. Convert Xenon’s density to scientific notation.
The Scientific Notation of Xenon’s density : 1.31293 × 10²
Further explanationScientific Notation consists of 2 parts
1. the first part: the first digit followed by the decimal point
2. The second part: the power of 10 which shows the number of digits after the decimal point
Xenon's density = 131.293
First digit = 1, then we give the decimal point and the next digit
The power of 10 is determined from the number of decimal points moved from the original decimal point
Because we move the decimal point two digits to the left, the power of 10 has the number 2 (10²)
So that the Scientific Notation form becomes:
1.31293 × 10²
Light travels at a speed of 3.00 x 100 ^10 cm/s. What is the speed of light in kilometers/hour?
Answer:
1.1 x [tex]10^{9}[/tex] km/h
Explanation:
Here we need to do two conversions- one from centimetres to kilometres and one from seconds to hours.
To get from cm to km- we divide by 100 000 since there are 100 000 cm in a km.
To get from seconds to hours we divide by 3600 since there are 3600 seconds in an hour
[tex]\frac{3*10^{10}cm/100000 }{1second/3600} =1.1*10^{9} km/h[/tex]
the percent composition of calcium is ?
Answer:
36%
Explanation:
This is the answer on edmentum/plato. Hope this helps. Jesus loves YOU!
1. Compare and contrast the characteristics of metals and nonmetals.
2. Describe the electrochemical series and why it’s important in understanding metals.
3. Describe the theory of ionization in regard to acids and bases.
4. Identify the role of indicators.
Answer:
1. Both metals and nonmetals are types of elements and can be involved in chemical reactions. Some of their differences are highlighted in the chart below.
Metals:
Appearance; Shiny.
Conduct heat or electricity; Yes.
Malleable or ductile; Yes, both and has great mechanical strength.
Form stable compounds; Forms stable compounds with acids; also forms oxides; replaces hydrogen in acids or water; combine with nonmetals; often becomes positive.
Nonmetals :
Appearance; Not shiny .
Conduct heat or electricity; Not well .
Malleable or ductile; Brittle and not easily molded into shapes .
Form stable compounds; Oxides usually give acid reactions in water; often becomes negative
2. The electrochemical series is an arrangement of metals in such order that any metal in the list is displaced from its compounds by any metal above it, but displaces any metal below it. The higher up the list a metal is, the greater its activity. Knowing a metal’s placement on this chart can help you understand the activity of the metal, especially in regard to its ability to displace hydrogen in acids. Any items on the list far above hydrogen will do a good job at displacing it, those near it won’t do such a good job, and those below it won’t displace it from acids at all.
3. When placed in water, acids dissociate and form free hydrogen ions, which determine the properties of acids. The number of hydrogen ions determines the strength of an acid. Strong acids dissociate to a large degree and produce a large number of hydrogen ions. Weak acids dissociate to only a slight degree.
When placed in water, bases dissociate and form free hydroxyl ions, which determine the properties of bases. Strong bases dissociate to a great degree and produce a large number of hydroxyl ions. Weak bases dissociate to only a slight degree.
When free hydrogen ions and free hydroxyl ions are removed from solutions of acids and bases, then the acidic and basic properties disappear. This is what happens when acids and bases are mixed together in proper proportion; the hydroxyl ion will unite with the hydrogen ion to form water. The resulting salt product is neutral.
4. Indicators are used to help determine the pH value of an unknown solution. These are often papers that turn a certain color at certain pH values.
Metals are good conductors of heat and electricity but the non-metals are not.
Compare metals and non-metalsMetals are good conductors of electricity and heat whereas non-metals are poor conductors of heat and electricity. Metals have high density while on the other hand, non-metals have low density. Metals are malleable and ductile whereas non-metals are brittle.
So we can conclude that metals are good conductors of heat and electricity but the non-metals are not.
Learn more about metals here: https://brainly.com/question/4701542
#SPJ2
Which molecules of the following gases will
have the greatest average kinetic energy?
1. N2 at 1 atm and 298 K
2. CO2 at 1 atm and 298 K
3. H2 at 0.5 atm and 298 K
4. He at 0.1 atm and 298 K
5. All of the molecules have the same kinetic
energy
Answer:
.
Answer: 5 All of the molecules have the same kinetic energy
since the temperature is kept constant at 298 K
Explanation:
The AVERAGE kinetic energy is directly proportional to the absolute temperature.
All the molecules have the same average kinetic energy as average kinetic energy is directly proportional to the absolute temperature. So, the correct option is 5.
What is average kinetic energy?
The average kinetic energy (K) is equal to one-half of the mass (m) of each gas molecule times the root mean square speed (Vrms) squared.
We know that the average kinetic energy is directly proportional to the absolute temperature.
All of the molecules have the same kinetic energy since the temperature is kept constant at 298 K.
Therefore, All the molecules have the same average kinetic energy as average kinetic energy is directly proportional to the absolute temperature.
To learn more about average kinetic energy, click here:
https://brainly.com/question/24134093
Jamal is 8 miles away from his house. He rides his bike home toward home at a speed of 12 mph..
How far away from home is he after a half hour?
Answer: 2miles
Explanation:if he’s going 12 miles in one hour, in half an hour he would’ve made it 6 miles. 8-6=2
Answer: b. 2 miles
Explanation:
Draw a structural formula for the alkene you would use to prepare the alcohol shown by hydroboration/oxidation.
Answer:
See explanation
Explanation:
The question is incomplete because the image of the alcohol is missing. However, I will try give you a general picture of the reaction known as hydroboration of alkenes.
This reaction occurs in two steps. In the first step, -BH2 and H add to the same face of the double bond (syn addition).
In the second step, alkaline hydrogen peroxide is added and the alcohol is formed.
Note that the BH2 and H adds to the two atoms of the double bond. The final product of the reaction appears as if water was added to the original alkene following an anti-Markovnikov mechanism.
Steric hindrance is known to play a major role in this reaction as good yield of the anti-Markovnikov like product is obtained with alkenes having one of the carbon atoms of the double bond significantly hindered.
In 1973, the insecticide called DDT wasbanned in the United States due to concerns that itwas toxic to fish and that it may have affected birds.There is little scientific evidence that DDT is directlyharmful to humans. How could banning DDT be beneficial to human health
Answer:
See explanation
Explanation:
DDT is dichlorodipphenylrtrichloroethane. It is was a popular insecticide used for agricultural purposes. Racheal Carson's book, silent springs drew attention to the use of insecticides such as DDT in agriculture.
DDT is a non-biodegradable, fat-soluble compound. It enters into the food chain and has the ability to bioaccumulate in the human body where it becomes deposited in the adipose tissue.
There is no direct harmful effect of DDT to humans, however, when oxidation of DDT takes place in body many harmful metabolites are released into the body causing harmful effects to human health such as; breast cancer, male infertility, miscarriages and low birth weight, developmental delay and liver damage.
There is convincing empirical evidence supporting the carcinogenicity of DDT its main metabolites DDE and DDD, however, many studies on the harm caused by DDT and its main metabolites in the body have so far led to inconclusive, and sometimes negative, results
Can you explain what vsepr stand for in your own word?
Does anybody understand this I’m stuck
Answer:
it's the first one
Explanation:
can you help me too
How many total atoms of element X are represented below?
QUICK I’ll GIVE BRAINLIEST
The number of isomers of C5H12 is:
Select one:
a. 4
b. 2
c. 5
d. 3
Answer:
The answer is option D 3
Explanation:
please mark as brainliest
Answer:
d.3
Explanation:
PLZ ANSWER WILL GIVE BRAINLIEST ASAP
Given the data below, what substance does not show a reaction for any of the tests? Hint: (+)= reaction occurred, (-)= no reaction
unknown
salt
Corn starch
Gelatin
Answer:
Salt
Explanation:
It has all -
pls help ill mark as brainliest :)
Q7. Pb + O2 PbO2
Is this combustion, single replacement, double replacement, synthesis, or decomposition
Answer:
This is a synthesis reaction.
Explanation:
Two elements are bonded together to form (synthesize) a new compound.
A 475 cm3 sample of gas at standard temperature (273 K) and pressure
(1 atm) is allowed to expand until it occupies a volume of 600. cm3. What
temperature would be needed to return the gas to standard pressure (1 atm)?
(n = constant
Answer:
T₂ = 344.8 K
Explanation:
Given data:
Initial volume of gas = 475 cm³
Initial temperature = 273 K
Final volume = 600 cm³
Final temperature = ?
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₂ = T₁V₂/V₁
T₂ = 273 K × 600 cm³ / 475 cm³
T₂ = 163800K . cm³ / 475 cm³
T₂ = 344.8 K
Write a balanced equation for the complete oxidation reaction that occurs when ethane burns in air
Alkanes are saturated hydrocarbons that have single bonds in chains
General formula for alkanes :
[tex]\tt \large{\bold{C_nH_{2n+2}}[/tex]
Hydrocarbon combustion reactions (specifically alkanes)
[tex]\large {\box {\bold{C_nH _ (_2_n _ + _ 2_) + \dfrac {3n + 1} {2} O_2 \Rightarrow nCO_2 + (n + 1) H_2O}}}[/tex]
So that the burning of ethane with air (oxygen):
[tex]\tt C_2H_6+\dfrac{7}{2}O_2\rightarrow 2CO_2+3H_2O[/tex]
2C₂H₆ (g) + 7O₂ (g) ⟶ 4CO₂ (g) + 6H₂O (ℓ)
or we can use mathematical equations to solve equilibrium chemical equations by giving the coefficients for each compound involved in the reaction
C₂H₆ (g) + aO₂ (g) ⟶ bCO₂ (g) + cH₂O (ℓ)
C : left 2, right b ⇒ b=2
H: left 6, right 2c⇒ 2c=6⇒ c= 3
O : left 2a, right 2b+c⇒ 2a=2b+c⇒2a=2.2+3⇒2a=7⇒a=7/2
Calculate the density of an object with mass = 30.50 g and a volume = 2.20 cm^3
Answer:
The answer is 13.86 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question
mass = 30.5 g
volume = 2.2 cm³
We have
[tex]density = \frac{30.5}{2.2} \\ = 13.863...[/tex]
We have the final answer as
13.86 g/cm³Hope this helps you
which balances the equation Mg + O2 → MgO
Answer:
2Mg+[tex]O_{2}[/tex]→2MgO
Explanation:
The first step is magnesium + oxygen equals magnesium oxide
The second step is changing that into an equation which looks like Mg+[tex]O_{2}[/tex]→MgO
The third step is to 2*Mg and 2*O as well as the product has to be 2*Mg,2*O which gets the equation to become balanced as 2Mg+[tex]O_{2}[/tex]→2MgO
The coefficient 2 balance the given reaction. The balanced equation for the given reaction is given as [tex]\rm Mg + O_2 \rightarrow 2MgO[/tex].
A balanced equation is a mathematical representation of a chemical reaction that respects the law of mass conservation. It depicts the reactants and products of the reaction, as well as the relative amounts of each species. The unbalanced equation is [tex]\rm Mg + O_2 \rightarrow MgO[/tex]. One magnesium (Mg) atom on the left side and one on the right side, so the magnesium is already balanced. Balance the oxygen (O) atoms. On the left side, there are two oxygen (O) atoms present in the O2 molecule. On the right side, there is only one oxygen (O) atom in the MgO molecule. To balance the oxygen atoms, we need to add a coefficient of 2 in front of MgO: [tex]\rm Mg + O_2 \rightarrow 2MgO[/tex]. The balanced equation is [tex]\rm Mg + O_2 \rightarrow 2MgO[/tex].
To know more about balanced equation, here:
https://brainly.com/question/12192253
#SPJ4
What is the volume, in liters, of 1.40 mol of oxygen gas at 20.0°C and 0.974 atm?
Answer:
V = 34.55 L
Explanation:
Given that,
No of moles, n = 1.4
Temperature, T = 20°C = 20 + 273 = 293 K
Pressure, P = 0.974 atm
We need to find the volume of the gas. It can be calculated using Ideal gas equation which is :
PV=nRT
R is gas constant, [tex]R=0.08206\ L-atm/mol-K[/tex]
Finding for V,
[tex]V=\dfrac{nRT}{P}\\\\V=\dfrac{1.4\times 0.08206\times 293}{0.974 }\\\\V=34.55\ L[/tex]
So, the volume of the gas is 34.55 L.
Does changing the number of protons change the identity of the element you have built ?
Answer: Yes.
Explanation:
the number of protons in the nucleus determines an element's identity. Chemical changes do not affect the nucleus, so chemical changes cannot change one type of atom into another. The number of protons in a nucleus does change sometimes, however. The identity of the atom, therefore, changes.
Emma wants to go swimming the first day the pool opens in May, but she is worried it will be too cold since summer only just started. She only likes to swim in the water if the pool is at least 82°F. The thermometer in the pool reads 24°C. Is the pool warm enough for Emma to swim in? Show all work to support your answer.
Answer:
the water is not warm enough for her
Explanation:
Given that
Her preferred temperature = 82°F
Thermometer in water reads = 24°C
Convert the preferred temperature to °C
°C=5/9 (82-32)
°C = 27.8 °C
Hence the water is not warm enough for her
The water is not warm enough for her to swim in.
She loves to swim in water at temperature = 82°F.Thermometer in water reads = 24°C.We have to convert Emma's preferred temperature to °C
°C= 5/9 x (F - 32)
°C=5/9 (82-32)
°C = 27.8
Therefore the temperature is 27.8°C
This means that the temperature of the water is not warm enough for her
to swim in.
Read more about Temperature here https://brainly.com/question/1852859
what is called when a paragraph studies data carefully
✅Paraphrasing and summarizing .✅
IamSugarBee
PLEASE HURRY WILL GIVE BRAINLIEST
Click Oil Basics and use the information to complete this passage that discusses how plastic production affects society.
The production of plastics makes life
{answer} , so it benefits society. On the other hand, the production of plastics causes air and water {answer} , so it also harms society.
Answer:
easier and pollution
Explanation:
I just had this question and got it right
Calculate the answer. Express It In scientific notation. All answers should have the correct number of significant figures.
(4.9 x 10^-2) (9.80 x 10^2) =
48.02
48
48 x 10^-1
4.8 x 10^1
Answer:
4.8 x 10^1
Explanation:
Move the decimal so there is one non-zero digit to the left of the decimal point. The number of decimal places you move will be the exponent on the 10. If the decimal is being moved t the right, exponent will be negative. If the decimal is being moved to the left, the exponent will be positive.
Which statement best defines potential enregy?
A. Potential energy is stored energy.
B. Potential energy is energy that can change over time.
C.Potential energy is the energy of motion.
D. Potential energy is the type of energy a roller coaster uses.
Answer:
A. Potential energy is stored energy
Explanation:
Answer:
A
Explanation:
i have the same question
14. How do you describe an atom in which the number of protons is equal
to the number of electrons?