Please answer this question according to the image below
for the molecule shown below, please answer the following questions.
1. how many carbon atoms are there?
2. how many p-orbitals are involved in π bonds in this molecule?
3. how many Ione pairs of electrons must be added?
4. how many formal positive charges must be added?
Answers
When we show the structure of a molecule, we see the arrangement of atoms in the molecule.
Structure of moleculesThe structure of a molecule shows the arrangement of atoms in the molecule.
1) There are 24 carbon atoms in the molecule.
2) There are 30 p- orbitals that are involved in pi bonds in the molecule.
3) We need to add 22 lone pairs of electrons
4) We do not need to add any formal positive charge to the molecule.
Learn more about molecules: https://brainly.com/question/19922822
Related Questions
For the reaction 2 NO₂(g) ⇌ 2 NO(g) + O₂(g) Kp = 1.11 × 10⁻⁵ at 200 °C. A 2.50 L vessel at 200 °C is filled with NO₂(g) at an initial pressure of 4.00 atm and allowed to come to equilibrium. What will be the pressure (in atm) of NO(g) at equilibrium?
Answers
The equilibrium pressure of NO is 2.14 atm.
What is equilibrium constant?The equilibrium constant is a numerical value that shows the extent to which reactants are converted into products. We have the reaction 2NO₂(g) ⇌ 2 NO(g) + O₂(g).
We have to set up the ICE table
From PV = nRT
P = nRT/V = 4 * 0.082 * 473/2.5 = 62 atm
2NO₂(g) ⇌ 2 NO(g) + O₂(g)
I 62 0 0
C -x +2x +x
E 62 - x 2x x
Kp = pNO^2 * pO2/pNO2^2
1.11 × 10⁻⁵ = (2x)^2 (x)/(62 - x)^2
1.11 × 10⁻⁵(62 - x)^2 = 4x^3
1.11 × 10⁻⁵(3844 - 124 + x^2) = 4x^3
0.04 - 0.0014x + 1.11 × 10⁻⁵x^2 = 4x^3
4x^3 - 1.11 × 10⁻⁵x^2 + 0.0014x - 0.04 = 0
x = 0.107 atm
Since;
pNO = 2x = 2(0.107) = 2.14 atm
The equilibrium pressure of NO is 2.14 atm.
Learn more about equilibrium: https://brainly.com/question/17960050
2 NO(g) + O2(g) → 2 NO2(g)
How many grams of NO2 can be produced when 25.0 g of nitrogen oxide reacts?
Answers
25g/30.01g = 0.83 moles
0.83(2/2) = 0.83 moles
0.83*46.005 = 38.2 grams
Answer:
2No+O2 gives 2No2
2 moles of No gives 2 moles NO2
Moles of No= 1.20/30=0.04
Moles = 0.04 ✖ 46=1.8 moles
pls answer properly I will rate 5 and brainlist just answer properly and I need it now just answer what you know in the question
Answers
Answer:
Fire is a chemical hazard, because of explosives and nukes. Falling debris is physical, difficulty breathing is a biological hazard, and fungi, pesticides, and cockroaches are biological as well. Muriatic acid is chemical, so is bleach. And any vibrations and noises or corrosion are physical.
what is one advantage of doing a feild experiment instead of a laboratory experiment
Answers
Answer:
Field experiments can often have the potential to give scientists opportunities that are not possible in a lab setting.
Explanation:
Having people "act natural" in a lab setting is impossible to truly achieve, as we all know what happens to our mental state and behavior when we are being actively observed. This is also especially helpful when conducting wildlife research, as there are a myriad of different things influencing animal and plant behavior that would be nigh impossible to recreate perfectly in a controlled lab setting.
Field research can have its disadvantages as well, as it is very hard to only have one thing change (make an independent variable) in a wild environment with ever-changing weather, social effects, etc. Also, you, as the researcher, as causing an impact on the very location that you are observing, which can alter your results in unpredictable ways.
The thing to remember is that each type of study has its advantages and disadvantages; if they didn't, then we'd all do the same type of research! You have to weigh your research options and figure out which one works best for your situation :)
Determine how many ml of water you need to remove, by evaporation, if you have a 500 ml of 10.20 M HNO3 dilute solution and you need to make it a 12 M HNO3 stock solution.
Answers
The total volume of water that would be removed will be 75 mL
Dilution equationUsing the dilution equation:
M1V1 = M2V2
In this case, M1 = 500 mL, V1 = 10.20 M, M2 = 12 M
Substitute:
V2 = 500 x 10.20/12
= 425 mL
The final volume in order to arrive at 12 M HNO3 would be 425 mL from the initial 500 mL. Thus, the total amount of water that will be removed by evaporation can be calculated as:
500 - 425 = 75 mL
More on dilution can be found here: https://brainly.com/question/7208939
The following questions refer to the equilibrium shown here:
4NH3(g) + 5O2(g) <-> 4NO(g) + 6H2O(g)
For a certain reaction at 25.0°C, the value of K is 1.2 × 10–3. At 50.0°C the value of K is 3.4 × 10–1. This means that the reaction is:
a. Never favorable
b. More information needed
c. Endothermic
d. Exothermic
e. None of the above
Answers
The value of K changes, affected by temperature
Endothermic (ΔH = +): temperature rises ⇒ K increases
Exothermic (ΔH = -): temperature increases ⇒ K decreases
From the data in the problem, the value of K increases in proportion to the temperature, then the reaction is said to be endothermic (C)
pls do in 1 hour!!!!!!!
Answers
Answer:
c) burrow underground
a) false
a) save rain water
c) prevent animals eating it
Instead of leaves, most cacti have spines or scales (which are modified leaves). These spines and scales do not lose water through evaporation (unlike regular leaves, which lose a lot of water). The spines protect the cactus from predators (animals that would like to eat the cactus to obtain food and/or water).
b) false
What abiotic factors do humans need?
The most important abiotic factors include water, sunlight, oxygen, soil and temperature. Water (H2O) is a very important abiotic factor – it is often said that “water is life.” All living organisms need water. In fact, water makes up at least 50% of almost all living things
If you repeated this experiment with a different concentration of hydroxide ion, would
you expect to find the same order with respect to crystal violet or a different one?
Briefly explain.
Answers
We see the order with respect to crystal violet (m),but no longer the order with respect to hydroxide (n).
Concentration of hydroxide ion equationGenerally the equation for the chemical reaction is mathematically given as
(CV)+(aq) + (OH)-(aq) ------------>. CVOH(aq)
The rate law for the chemical reaction is given as
Rate = k[CV+]m[OH-]n,
Because the hydroxide ion conc is an extra of thousand times as massive as the conc of crystal violet, [OH–] will now not exchange drastically all through this experiment.
Therefore, you will find the order with respect to crystal violet (m),but no longer the order with admire to hydroxide (n).
For more information on Chemical Reaction
https://brainly.com/question/11231920
The average annual return from stock investments historically is:
a) 11.3%
b) 12%
C) 12.5%
d) 20%
Answers
Answer:
11.3%
Explanation:
The stock market’s average annual return through history is 11.3%, which is more than most savings accounts pay.
when methane reacts with oxygen, the products are carbon dioxide and water. How many grams of carbon dilxide are formed if 30 g of methane react completely with 75 g of oxygen to form 50 g of water?
Answers
Answer:
CH4+2O2→CO2+2H2O
Moles of oxygen=3232=1
Moles of carbon dioxide=4422=0.5
Moles of water=1818=1
1 mole of methane reacts with 2 moles of oxygen to give 1 mole of CO2 and 2 moles of water so 0.5 mole of methane will be required which is equal to 0.5×16=8g.
Explanation:
8g
Uneven heating of Earth creates global wind systems. How does that impact climate?
Answers
Answer:
Unequal heating of the Earth’s surface forms large global wind patterns.Large global wind systems are created by the uneven heating of the Earth’s surface. These global wind systems, in turn, drive the oceans’ surface currents.Explanation:
Hope this helps
Balance this equation:
C₂H₂ + O₂
---->
CO2 + H2O
Answers
Answer:
Balance The Equation: C2H2 + O2 = CO2 + H2O
1. Label Each Compound With a Variable
aC2H2 + bO2 = cCO2 + dH2O
2. Create a System of Equations, One Per Element
C: 2a + 0b = 1c + 0d
H: 2a + 0b = 0c + 2d
O: 0a + 2b = 2c + 1d
3. Solve For All Variables (using substitution, gauss elimination, or a calculator)
a = 2
b = 5
c = 4
d = 2
4. Substitute Coefficients and Verify Result
2C2H2 + 5O2 = 4CO2 + 2H2O
L R
C: 4 4 ️
H: 4 4 ️
O: 10 10
The purpose of this guide is to help you write a clear and concise report that summarizes the lab I just completed. This lab showed me how water carries rocks to a new location. For instance how the first model showed how a stream would act with light drizzle to downpour as I saw the outcomes were all if not completely then partially different I read the information that was given to me before I started each lab lesson and went on from there. Just say something that you think you could have done better in two to three sentences
topic: kentic energy
100 points for whole thing
Answers
Answer:
The purpose of this guide is to help you write a clear and concise report that summarizes the lab I just completed. This lab showed me how water carries rocks to a new location. For instance how the first model showed how a stream would act with light drizzle to downpour as I saw the outcomes were all if not completely then partially different
I read the information that was given to me before I started each lab lesson and went on from there.
Explanation:
:)
What is the mass in grams of a sample of 1.73 x 10^22 molecules of
N^20^5?
Do not report units in your answer. Report your answer with two
places past the decimal point.
Answers
Answer:
the answer is 5
Explanation:
if you add 5% divided by 3 = 15%.
So if you add all of those plus the 30% you will be getting 45%.
Why is Carbon not used as a refactory material
Answers
Answer:
Probably because of the dangers
Explanation:
Carbon when emitted causes large damage to the air, so it would be risky because of both the impact on the environment and the consequences the government would give them. It could also be because Carbon isn't durable enough to be burned as a refractory material.
Please see the attached file and answer. I need this ASAP!
Giving Brainliest!
Answers
Answer:
Answer no. 2
Explanation:
Distillation is the process of separating consistent solids from a liquid mixture
Suppose you have a sample of table salt (NaCl) that has a mass of 100.0 grams. If
this amount of salt is added to a large beaker and filled with water until the total
volume is 2 liters, what is the concentration of this solution in units of Molarity?
Please do not include any units in your answer.
Answers
Taking into account the definition of molarity, the concentration of the solution is 0.855 [tex]\frac{moles}{liter}[/tex].
Definition of molarityMolar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Molarity of NaClIn this case, you have:
number of moles of NaCl= [tex]100 grams\frac{1 mole}{58.45 grams} =[/tex]1.71 moles (being 58.45 g/mole the molar mass of NaCl)volume 2 LReplacing in the definition of molarity:
[tex]Molarity=\frac{1.71 moles}{2 L}[/tex]
Solving:
Molarity= 0.855 [tex]\frac{moles}{liter}[/tex]
Finally, the concentration of the solution is 0.855 [tex]\frac{moles}{liter}[/tex].
Learn more about molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
write a homologous series containing -CHO as a functional group
Answers
Answer: The members of homologous series are
HCHO,CH3CHO,C2H5CHO,C3H7CHO .
The members of the homologous series containing -CHO as a functional group is HCHO,CH₃CHO,C₂H₅CHO,C₃H₇CHO .
What is a functional group?Functional group is defined as a substituent or group of toms or an atom which causes chemical reactions.Each functional group will react similarly regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.
The reactivity of functional group can be enhanced by making modifications in the functional group .Atoms present in functional groups are linked to each other by means of covalent bonds.They are named along with organic compounds according to IUPAC nomenclature.
Functional group inter conversion is also possible by retro -synthesis.In some cases , functional groups can be charged molecules.
Learn more about functional groups,here:
https://brainly.com/question/14618322
#SPJ2
What quantity of heat (in kJ) would be required to convert 15.1 g of ice to water at 0.00°C? (∆Hfus = 6.01 kJ/mol for water)
for the answer I got 5.04, I don't know if it is correct
if it's correct, how would the process change if celsius was not zero, or does nothing change.
Answers
The quantity of heat required to convert the ice to water is 5048.4 J.
Quantity of heat requiredThe quantity of heat required to convert the ice to water is calculated as follows;
Q = n∆Hfus
where;
n is the number of moles of the ice∆Hfus is heat of fusion = 6.01 kJ/molNumber of moles of the iceThe number of moles of the ice is calculated as follows;
n = m/M
where;
M is molar mass of water (H2O) = 18 g/mol
n = 15.1/18
n = 0.84 mole
Q = 0.84 x 6.01 x 10³
Q = 5048.4 J
Thus, the quantity of heat required to convert the ice to water is 5048.4 J.
Learn more about quantity of heat here: https://brainly.com/question/13439286
Which of the following is the only genotype not able to taste PTC.
a. IT
b. Tt
c. tt
Answers
Genotype have the non-taster phenotype
Consider the following claim: Group behavior can increase the chances for an individual and a species to survive and reproduce.
Identify evidence from the lesson that supports this claim. Use specific examples to explain the cause-and-effect relationship between particular group behaviors and an individual’s survival.Then, identify an additional, reputable source that provides evidence to further support this claim. Use this additional evidence to draw a conclusion about the role of group behavior in individual and species’ survival. Provide a link to the source at the bottom of your response. ill give brainliest
Answers
Answer:
dont know but i went to the store td and i bought some food then after i ate it i had to use the bathroom n i fell on my way there and it hurt
Explanation:
(Many social behaviors of animals are adaptive, meaning that being social ultimately increases an animal's fitness — its lifetime reproductive success. One example of how social behavior is adaptive is aggregation against predators.)
How many moles of Cu(OH)2 will be produced if given 1 mole
KOH.
Answers
Answer:
0.032 mole
Explanation:
Please mark me as brainliest
How many unpaired electrons are found in a ground state atom of Os?
Answers
Answer:
two unpaired electrons
Explanation:
each of which are located in a different pi* antibounding orbital.
Which subatomic particle cannot change in an atom?
Proton, Neutron, Electron
Answers
Answer: Protons cannot change in an atom because that would change the identity of a particle. Electrons on the other hand can be added or removed creating an ion. Neutrons can also be added or removed to create an isotope.
The Linnaean system of classification sorts organisms into groups using a hierarchical system of levels.
List the following terms correctly in the Linnaean classification system from the most general to the most specific.
Order
Phylum
Species
Kingdom
Genus
Answers
Dissolve 30 g of sodium sulphate into 300 mL of water
determine the number of moles of sodium sulphate in the solution
Answers
Answer:
number of moles = 0.21120811
Explanation:
To find the number of moles, given the mass of the solute, we use the formula:
[tex]\mathrm{n = \dfrac{ m }{ M } }[/tex]
[tex]\mathrm{n = number\:of\:moles\:(mol)}[/tex]
[tex]\mathrm{m = mass\:of\:solute\:(g)}[/tex]
[tex]\mathrm{M = molar\:mass\:of\:solute\:( \dfrac{ g }{ mol } )}[/tex]
Label the variables with the numbers in the problem:
[tex]\mathrm{n =\:?}[/tex]
[tex]\mathrm{m =30\:g }[/tex]
[tex]\mathrm{M =\:?\:Calculate\:the\:molar\:mass }[/tex]
The first thing we have to do is find the molar mass of sodium sulfate, in order for us to use the formula for finding the number of moles:
Formula for finding the molar mass of sodium sulfate:
[tex]M({ \left Na \right }_{ 2 } { \left So \right }_{ 4 }) = m \left( Na \right) +m \left( S \right) +m \left( O \right)[/tex]
For the variables and what they mean are below for finding the molar mass of sodium sulfate:
[tex]\mathrm{M =molar\:mass }[/tex]
[tex]\mathrm{m =moles=2\:moles\:for\:Na\:,1\:mole\:for\:S,\:and\:4\:moles\:for\:O}[/tex]
[tex]\mathrm{Na =sodium=22.99\:g }[/tex]
[tex]\mathrm{S =sulfur=32.06\:g }[/tex]
[tex]\mathrm{O =oxygen=16.00\:g }[/tex]
Plug the numbers into the formula, to find the molar mass of sodium sulfate:
[tex]M({ \left Na \right }_{ 2 } { \left So \right }_{ 4 }) = m \left( Na \right) +m \left( S \right) +m \left( O \right)[/tex]
[tex]\mathrm{Substitute\:the\:values\:into\:the\:formula}[/tex]
[tex]M = 2 \left( 22.99 \right) +1 \left( 32.06 \right) +4 \left( 16.00 \right)[/tex]
[tex]\mathrm{Multiply\:2\:by\:22.99\:to\:get\:45.98\:and\:1\:by\:32.06\:to\:get\:32.06}[/tex]
[tex]\mathrm{M = 45.98+32.06+4\:(16)}[/tex]
[tex]\mathrm{Multiply\:4\:by\:16\:to\:get\:64}[/tex]
[tex]\mathrm{M = 45.98+32.06+64}[/tex]
[tex]\mathrm{Add\:45.98\:and\:32.06\:to\:get\:78.04}[/tex]
[tex]\mathrm{M = 78.04+64}[/tex]
[tex]\mathrm{Add\:78.04\:and\:64\:to\:get\:142.04}[/tex]
[tex]\mathrm{M = 142.04}[/tex]
Now that we have found the molar mass, we can calculate the number of moles in the solution of sodium sulfate with the formula:
[tex]\mathrm{n = \dfrac{ m }{ M } }[/tex]
[tex]\mathrm{n =\:?}[/tex]
[tex]\mathrm{m =30\:g }[/tex]
[tex]\mathrm{M = 142.04\:g/mol}[/tex]
[tex]\mathrm{Substitute\:the\:values\:into\:the\:formula}[/tex]
[tex]\mathrm{n = \dfrac{ 30 }{ 142.04 }}[/tex]
[tex]\mathrm{Divide\:142.04\:by\:30\:to\:get\:0.21120811}[/tex]
[tex]\mathrm{n = 0.21120811}[/tex]
0.21120811 rounded gives you 0.2112
or if you did the problem without decimals
30 grams of sodium sulfate divided by its molecular weight – which we found to be 142 – gives us a value of 0.2113 moles.
which 19th- century art movement most directly influenced the development of abstract art in the 20th century?
A: Realism
B: Romanticism
C: Impressionism
D: Post-Impressionism
Answers
Answer:
B.
Thank goodness for all the help you can
Explanation:
Basta
Both bromous acid (HBrO2) and hypobromous acid (HBrO) are weak acids. In both molecules, the hydrogen atom is bound to _______. Yet, the bond is more polar in ______, which makes it a stronger acid.
Answers
The polarity of HBrO2 is greater than that of HBrO hence HBrO2 is a stronger acid than HBrO .
What is an acid?According to the Arrhenius definition, an acid is any sustenance that produces hydrogen ions as the only positive ion in solution. In both molecules we can see that hydrogen is bonded to electronegative oxygen atoms.
The bond is more polar in HBrO2 and as a result of this, the molecule, HBrO2 is a stronger acid than HBrO.
Learn more about acidity: https://brainly.com/question/1515003
which of the following spheres is likely to represent a metal atom? WHich
Answers
Answer:
Metals lose electrons when reacting with nonmetals, so the red sphere represents a metal.
mention one metal that doesn't burn or form oxide when heated in air
Answers
Answer:
Gold, Platinum, Silver, Ruthenium