math! The concentration of a water and
alcohol solution is 25 percent alcohol by
volume. Calculate what the volume of alcohol
would be in 200 mL of the solution.
Answer:
50ml
Explanation:
The formula says that 25 percent of the solution is alcohol, so 200 x 0.25 equals to 50, or 50ml.
Is this soulution acidic or basic
Ph= 12
Basic
Acidic
Answer:
basic
Explanation:
ph>7 soits basic not acidic
Answer: A pH greater than 7 is basic
Explanation:
Because if you look at a ph scale the number 12 is apart of the alkaline part. if its apart of the alkaline park it mean it is not a basic acidic
Order the following elements according to the valence numbers from lowest to highest
1. Boron
2. Sodium
3. Chlorine
4. Beryllium
How to get your crush to like you back
mass is the gravitational pull on the earth
-tru
-fals
plz help
Answer:
I believe the answer is false
Explanation:
Earth's gravity comes from all of its mass. All the mass makes a combined gravitational pull on all the mass in an object. If you were on a planet with less mass than Earth, you would weigh less than you do here. Mass is the quantity of matter in a physical body. It is also a measure of the body's inertia, the resistance to acceleration when a net force is applied. An object's mass also determines the strength of its gravitational attraction to other bodies. Mass is not the gravitational pull on the earth.
Do solar panels use electrical energy or produce electrical?
Answer:
How Does a Solar Panel Generate Power? Solar panels use the photons produced by sunlight to generate direct current (DC) electricity. When the photons hit the panel they are absorbed by the panel's semiconducting silicon material.
Explanation:
Answer:
Solar panels produce electrical energy by absorbing the solar energy from the sun and converting it into electrical energy.
Explanation:
How many moles of nitrogen dioxide, NO2, are present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L
There are 0.436 moles of nitrogen dioxide, NO2, present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L.
IDEAL GAS LAW:The number of moles of nitrogen dioxide (NO2) in this question can be calculated by using the ideal gas law equation as follows:
PV = nRT
Where;
P = pressure (atm)V = volume (L)T = temperature (K)R = gas law constant (0.0821 Latm/molK)n = number of molesAccording to the reaction conditions given in this question;
P = 2.46 atmV = 4.8Ln = ?T = 330K2.46 × 4.8 = n × 0.0821 × 330
11.81 = 27.093n
n = 11.81 ÷ 27.093
n = 0.436mol
Therefore, there are 0.436 moles of nitrogen dioxide, NO2, present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L.
Learn more about the ideal gas law at: https://brainly.com/question/4147359?referrer=searchResults
Don’t understand this science Question.
Answer:
I got you..you need help but with which question?
Explanation:
Have a great day!
How many moles of Iron (III) Oxide are found in 429 grams of Iron III Oxide?
Answer:
2.686485288205376 Explanation:
1 grams Iron(III) Oxide is equal to 0.0062622034690102 mole.
RNA is a double strand. True or False?
Answer:
False, RNA is single stranded, DNA is double stranded and forms a double helix
Explanation:
7. Balance the following reaction under basic conditions: Al (s) + Cr2O72- (aq) -> Al3+ (aq) + Cr3+ (aq)
8. What is the ^o of the following balanced redox reaction (use the reduction potentials provided in Table 11.1
below)?
Fe3+ (aq) + Au (s) -> Fe (s) + Au3+ (aq)
9. What is G for the reaction below – calculate it from the ^o ?
Fe (s) + Au3+ (aq) -> Fe3+ (aq) + Au (s)
The free energy change of the reaction; Fe (s) + Au3+ (aq) -> Fe3+ (aq) + Au (s) is calculated to be -443.83KJ/mol.
For the reaction shown in question 7, we can divide it into half equations as follows;
Oxidation half equation;
6 Al (s) -------> 6Al^3+(aq) + 18e
Reduction half equation;
3Cr2O7^2-(aq) + 42H^+(aq) + 18e -----> 6Cr^3+(aq) + 21H2O(l)
The balanced reaction equation is;
6Al(s) + 3Cr2O7^2-(aq) + 42H^+(aq) -----> 6Al^3+(aq) + 6Cr^3+(aq) + 21H2O(l)
The E° of this reaction is obtained from;
E° anode = -0.04 V
E°cathode = +1.50 V
E° cell = +1.50 V - (-0.04 V) = 1.54 V
Given that;
ΔG° = -nFE°cell
n = 3, F = 96500, E°cell = 1.54 V
ΔG° = -(3 × 96500 × 1.54)
ΔG° = -443.83KJ/mol
Learn more: https://brainly.com/question/967776
How many grams of potassium sulphate are formed when 49g of sulphuric acid in solution are neutralised by potassium hydroxide?
Do the ingredients changing into a cake in the oven a chemical reaction?
Answer:
When you bake a cake, the ingredients go through a chemical change. A chemical change occurs when the molecules that compose two or more substances are rearranged to form a new substance! When you start baking, you have a mixture of ingredients. The flour, egg, sugar,
Explanation:
The speed at which a chemical reaction proceeds is called
Answer:
Answer: Reaction Rate
Explanation:
reaction rate, in chemistry, the speed at which a chemical reaction proceeds. It is often expressed in terms of either the concentration (amount per unit volume) of a product that is formed in a unit of time or the concentration of a reactant that is consumed in a unit of time.
A wave has wavelength of 10 m and a speed of 340 m/s. What is the frequency of the wave?
Answer:
The frequency of the wave is 34 Hertz
15. Which reaction produces a coloured substance?
A. The addition of sodium metal to water.
B. The addition of sulfur dioxide gas to water.
C. Burning sodium metal in chlorine gas.
D. The addition of chlorine gas to a solution of potassium iodide.
Answer:
the addition of chlorine gas to a solution of potassium iodide.
The reaction that produces a colored substance is the addition of chlorine gas to a solution of potassium iodide. The correct option is D.
What is a chemical reaction?In a chemical reaction, reactants undergo a chemical reaction and transform into products through a chemical process. For instance, when humans breathe in oxygen, it combines with glucose to create carbon dioxide, water, and energy.
Another sign that a chemical reaction has taken place is a change in color. If two solutions are combined and a color change occurs that is not just the effect of diluting one of the reactant solutions, a reaction has taken place. A solid and a liquid combined may also result in a change in color.
Therefore, the correct option is D. The addition of chlorine gas to a solution of potassium iodide.
To learn more about chemical reactions, refer to the link:
https://brainly.com/question/22817140
#SPJ2
How many atoms are in 2 moles of oxygen?
Answer:
6.02 × 1,023
Explanation:
One mole of oxygen gas, which has the formula O2, has a mass of 32 g and contains 6.02 X 1,023 molecules of oxygen but 12.04 X 1,023 (2 X 6.02 X 1,023) atoms, because each molecule of oxygen contains two oxygen atoms.
Write the chemical formulas and names for the following ionic compounds. Barium and phosphate 
Barium is Ba. Atomic no. 56 and atomic mass =137.3.
Phosphate is naturally occurring form of phosphorus. Phosphate is P. Atomin no. 15 and atomic mass =31.0.
How to write a chemical formula ?
Answer:
To write a chemical equation, the reactants should be written on the left, and the products should be written on the right and the coefficients should be written next to the symbols of entities to indicate the number of moles of a substance produced used in the chemical reaction.
How does a paper bag wrapped around a hot water bottle create convection?
can you help me with this
Answer:
I think it is A
Explanation:
if I am wrong I am so so so sorry
but i'm pretty sure I am right.
please let me know if I am right :)
A student creates a hypothesis about their upcoming experiment. What must the
student do in their experiment with relationship to their hypothesis?
create a law based on the hypothesis
change the experiment to make the hypothesis correct
ignore the hypothesis
make observations to prove or disprove the hypothesis
Answer:
D. make observations to prove or disprove the hypothesis
Explanation:
Which chemicals previously used in products such as refrigerants, aerosol sprays, and cleaning products contributed to the depletion of the ozone layer
Answer:chlorofluorocarbons (CFCs) could deplete Earth's atmospheric ozone layer, which blocks the sun's damaging ultraviolet rays. When the scientists reported their findings in 1974, CFCs were widely used as refrigerant gases and as propellants in aerosol sprays
Explanation:
Which of the following methods of heat transfer causes the tectonic plates to move?
Conduction
Convection
Evaporation
Radiation
calculate the mass of sodium sample that it contains 2 Na atoms of sodium
please i need help with this ques.
Answer:
45.98 I believe if its wrong im sorry
When Brian first sorted out his thoughts, he figured this was the first day after the crash and what did he think would happen next?
It should be noted that when Brian first sorted out his thoughts, the first thing that he thought would happen next is that he would probably be rescued that day.
It should be noted that in Chapter 5 of Hatchet, Brian wakes up in the forest and then, he realized that he was desperately thirsty.
When Brian first sorted out his thoughts, he figured this was the first day after the crash and that he would probably be rescued that day. He believed that he was going to wither up and die if he doesn't get anything that he'll drink.
Learn more about excerpts on:
https://brainly.com/question/21400963
1. Atomic mass of 12 and 6 neutrons what is the atomic number?
Answer:
The atomic number would be 12.
Explanation:
A neutral atom of Carbon-12 contains six protons, six neutrons, and six electrons.
The very act of you observing something
will disturb the system is known as:
Answer:
The observer effect is the answer.
Synthetic fibers, like plastic, are derived from organic compounds. These fibers have been chemically changed by humans to last longer for better storage and more effective uses. These fibers are stronger than naturally occurring fibers like cotton and wool. Which of the following is a downside to these synthetic fibers when compared to natural fibers?
A.
The longer lasting material is more difficult to break down.
B.
The longer lasting material is less useful in manufacturing.
C.
The longer lasting material is not able to withstand high temperatures.
D.
The longer lasting material makes the fibers more expensive to buy.
The downside of this is that the longer lasting material is more difficult to break down.
Both natural fibers and synthetic fibers are polymer materials. Polymer materials are materials that are made by the agglomeration of small molecules called monomers.
The natural fibers are less long lasting than the synthetic fibers. The downside of this is that the longer lasting material is more difficult to break down. As a result of these, synthetic fibers lead to environmental pollution problems.
Learn more: https://brainly.com/question/25140263
Answer:
the longer lasting material is more difficult to break down.
Explanation:
Help me ASPAPPPPPPPPP
Answer:
Explanation:
1. H2O
Lewis Dot:
See the attachment.
Note the б+ and б- signs on the H and O atoms, respectively. Those represent the slightly positive and slightly negative sides of the water molecule. Those slight charges on a single water molecule are attracted to their opposite charges on neighboring H2O molecules, as shown in the graphic. This interaction is what gives water it's cohesive properties.
3. The property of cohesion describes the ability of water molecules to be attracted to other water molecules. which allows water to be a "sticky" liquid.
The hydrogen bonds are attractions of electrostatic force. They arise due to the difference in charge between the slightly positive hydrogen ion and the slightly negative oxygen ion. Hydrogen bonds form between neighboring hydrogen and oxygen atoms of adjacent water molecules. The attraction between individual water molecules creates a bond known as a hydrogen bond, and it is what gives water it's cohesiveness, or ability to support water spiders, paper clips, and produces a loud noise in the event of a belly flop in a pool (including the yelp from the swimmer).
4. I'm not sure what is being asked for the two blanks. Water is polar and dissolves salts (ionic compounds) and hydrophilic molecules (water-loving molecules).