9. How are ecological footprints useful?

Answers

Answer 1

As ecological footprints provide an easily communicable way of measuring the ecological bottom‐line condition for sustainability, it is a useful tool for promoting a sustainable future. It is particularly useful for cities, as it is in cities where the battle for sustainability will be won or lost.
Answer 2

Answer:

This is what the Ecological Footprint does: It measures the biologically productive area needed to provide for everything that people demand from nature: fruits and vegetables, meat, fish, wood, cotton and other fibres, as well as absorption of carbon dioxide from fossil fuel burning and space for buildings and roads.

Why it's useful:

Ecological footprint (EF), measure of the demands made by a person or group of people on global natural resources. It has become one of the most widely used measures of humanity’s effect upon the environment and has been used to highlight both the apparent unsustainability of current practices and the inequalities in resource consumption between and within countries.


Related Questions

? Any idea on this I’m getting some mixed up

Answers

Answer:

1. electrochemical reaction

2. combustion

3. photosynthesis

4. respiration

Explanation:

1. Sandra buys a $4 000 television and pays $2 000 deposit. The rest is payable in 8 equal monthly payments. If the flat rate of interest charged is 7% p.a. what is the total amount paid for the item?

Answers

Answer:

$2140

Explanation:$2000 missing plus 7 percent of 2000 is 140 so 2000+140=2140. Each month she would pay $268 approx.

The rays travelled from AIR to an unknown substance. Calculate the n value and
determine the unknown by following these steps: {6 marks}
Medium
n
air
water
ethanol
quartz glass
crown glass
flint glass
ruby
zircon
diamond
1
1.33
1.37
1.47
1.52
1.58
1.54
1.92
2.42
a. On your PAPER calculate n for the unknown value using Ray #1. Type in your
final answer to the electronic box. On paper, ensure #6 is written beside the
calculations.
b. Using the table provided, determine what material was used in the dish to
ar bu
ano below

Answers

Answer:

So what you do is you add all of them then you put an n with the answer.

Explanation:

The gravitational potential energy of a cucumber-harth system changes when which factor changes?

A) the cucumber's speed
B) the cucumber's mass
c) the cucumber's temperature
D) the length

Answers

The cucumbers mass.

If it’s heavier, the gravitational pull will bring it down faster.

what is the potential energy of a 2kg plant that is on a windowsill 1.3 m high?

what is the kinetic energy of a 7.26 kg bowling ball that is rolling at a speed of 2 m/s

an apple as 6 J of energy. the apple sits on a counter 3 m high. what is the mass of the apple/

Answers

Answer:

25.48

Explanation:

A race car makes one lap around a track of radius 180 m in 90.0 s. What is the centripetal acceleration in m/s2?
a
0.5
12.6
Ob
OC
Od
.87
2.
2

Answers

Answer:

0.9m/s^2 (yours is 0.87, so choose that)

Explanation:

formula for centripetal acceleration:

v^2/r

to find v, we know that f=1/90s, and r=180m.

v=(2pir)/T

v=(2pi(180))/90

v=12.6m/s

now plug into a=v^2/r

a=(12.6)^2/180

a=0.9m/s^2

A geothermal plant has been built in a location. Which of these is the most likely benefit of the geothermal plant in this location?

A. Decrease in geothermal fuels consumption
B. Improvement to hot springs and geysers
C. Long-term cost savings for energy users
D. Increase in emission of greenhouse gases

Answers

Answer:

C

Explanation:

A and B are not true and D is a disadvantage

Answer:

C.  Long-term cost savings for energy users.

Explanation:

C is correct because the first option is a drawback that is unlikely.  B is a good answer but not the best.  It's a likely benefit, but C is a more likely benefit.  D is a drawback.  C is correct.  I also got this right on my quiz.

Hope this helps!

All satellite eventually lose their orbital energy and plummet to earth because of______.

Answers

Answer:

gravity

Explanation:

Even when satellites are thousands of miles away, Earth's gravity still tugs on them. Gravity—combined with the satellite's momentum from its launch into space—cause the satellite to go into orbit above Earth, instead of falling back down to the ground.

Halpinium metal (Jh(s)) can lose electrons via the photoelectric effect. The binding energy for Jh is 2.25x10-19 J. If a photon having an energy of 4.52x10-19 J strikes the surface of halpinium, calculate the de Broglie wavelength (in nm) of the electron that is ejected.

Answers

The relationship of the photoelectric effect and the de Broglie expression allows us to find the result for the wavelength of the ejected electrons is:

Wavelength of de Broglie is λ= 1.03 10⁻⁹m

The photoelectric effect was explained by Einstein assuming that the light rays behave like particles called photons, therefore the

                 [tex]E_{photon} = K + \Phi[/tex]  

where [tex]E_{photon}[/tex] is the energy of the photon given by the Planck relation, K is the kinetic energy of the ejected electrons and Ф the work function of the material.

The Planck relationship states that the energy of the photons is proportional to the frequency.

            [tex]E_{photon} = h f[/tex]

Where h is Planck's constant and f is the frequency of the photons.

They indicate The work function is Ф= 2.25 10⁻¹⁹ J, the energy of the photon [tex]E_{photon}[/tex] = 4.52 10⁻¹⁹ J, let's find the kinetic energy of the ejected electrons.

            [tex]K = E_{photon} - \Phi[/tex]  

Let's calculate.

           K = (4.52-2.25) 10⁻¹⁹

           K = 2.27 10⁻¹⁹ J

Kinetic energy is the energy of motion and is given by the relationship.

          [tex]K = \frac{p^2}{2m}[/tex]  

The wave-particle duality was established by de Broglie with the relation.

         [tex]p = \frac{h}{\lambda }[/tex]  

Let's replace.

         [tex]K = \frac{1}{2m} (\frac{h}{\lambda} )^2 \\\lambda^2 = \frac{h^2}{2m K}[/tex]

       

let's calculate.

        [tex]\lambda^2 = \frac{(6.63 \ 10^{-34})^2 }{2 \ 9.1 \ 10^{-31 } \ 2.27 \ 10^{-19}}[/tex]

        [tex]\lambda = \sqrt{1.06397 \ 10^{-18}}[/tex]

        λ  = 1.03 10⁻⁹m

In conclusion with the relationship of the photoelectric effect and the de Broglie expression we can find the result for the wavelength of the ejected electrons is:

Wavelength of de broglie is:  λ  = 1.03 10⁻⁹m

Learn more about the photoelectric effect here: brainly.com/question/25730863

if a tent is touched with a finger on inner surface , when it is raining , it allows the rain water to leak through. give a reason for this observation

Answers

Explanation:

When water vapor in the air comes into contact with something cool, like the ceiling of a tent, its molecules slow down and get closer together. When that happens, the gaseous water vapor turns back into liquid water droplets. That's condensation!

2. What do aerospace engineers do? (1 point)
O design dams
O design machines
O design planes
O design cars

Answers

aerospace engineers design planes
They Design planes yeah

how is the physical property of density calculated?

Answers

Answer:

The formula for density is d=M/V

Explanation:

where d is density, M id mass, V is volume.

An experiment is conducted such that an applied force is exerted on a 5kg object as it travels across a horizontal surface in which frictional forces are NOT considered to be negligible. A graph of the net force exerted on the object as a function of the object’s distance traveled is shown. How could a student use the graph to determine the net work done on the object?

Answers

If an experiment is conducted such that an applied force is exerted on an object, a student could use the graph to determine the net work done on the object.

The  graph of the net force exerted on the object as a function of the object’s distance traveled is attached below.

A student could use the graph to determine the net work done on the object by Calculating the area bound by the line of best fit and the horizontal axis from 0m to 5m

For more information on work done, visit

https://brainly.com/subject/physics

Answer:

D. There is not enough information that is known or can be obtained from the graph to determine the net work done on the object.

Explanation:

it’s the answer For Ap classroom

"PLS HELP ME WITH THIS QUESTION!" Two factors that affect climate patterns on Earth are the tilt of Earth on its axis and the topography of Earth. Describe how these two factors affect the climate patterns of Earth.

Answers

Answer:

The tilt of the Earth causes some places to be hit more by the sun's rays, while the topography affects wind travel.

Explanation:

Because of the way the Earth is tilted on its axis, some parts receive more heat due to being hit more directly by the sun's rays. This is the reason why the North pole is very cold since it doesn't get directly hit by the sun's rays. As for the topography, the way the wind travels is affected by mountains, and the temperature of winds are affected by the places the wind originated from. Also, high altitude places such as mountain summits are colder, while low altitude places are warmer. So, when an area is under direct sunlight, it causes warm climate, and when an area receives warm air because of its topography, it causes further heat.

Which does not apply to unbalanced forces?


Net force = 0


Have direction


Net force does not = 0


Changes an object's motion

Answers

Answer:

Net force = 0

Explanation:

Whenever there is an unbalanced force, it shows that the net force doesn’t = 0 because if net force = 0, then everything force is balanced by another force. If there is an unbalanced force, acceleration will occur in the direction the net force is towards.

if a big person and a small person run up the stairs at the same time who has more force

Answers

Answer:

a big person

Explanation:

because the big person exerts more force over the same distance

Answer:

the big person exerts the largest force on the stairs because he weighs more

Explanation:

this question answer is ☝️☝️

The ratio between the force of friction and the normal force is called:

A.the drag
B.rolling friction
C.the coefficient of friction
D.the starting friction

Answers

Answer:

C.the coefficient of friction

Explanation:

Hope this helps. can i have brainliest thanks!

Student 1 lifts a box with a force of 500 N and sets it on a tabletop 1. 2 m high. Student 2 pushes an identical box up a 5 m ramp from the floor to the top of the same table. Which student did the MOST work?.

Answers

The student 2 did the MOST work because he pushed the box to a greater height.

The given parameters:

Force applied by Student 1 = 500 NHeight of table for student 1 = 1.2 mHeight of ramp for student 2 = 5 m

The work done by student 1 is calculated as follows;

Work = P.E = mgh

P.E = 1.2mg

The work done by the student 2 is calculated as;

P.E = 5mg

where;

m is the mass of the box

Thus, we can conclude that the student 2 did the MOST work.

Learn more about work done here: https://brainly.com/question/8119756

how can I make a square fit in a triangle hole

Answers

cut the square and make it a triangle

What does the risk of biological harm from radiation depend on?

Answers

Answer:

The effects of radiation depend on the type, energy, and location of the radiation source, and the length of exposure.

Please help me answer this! ANSWER IN SCENTENCE FORMAT!!! :
Two factors that affect climate patterns on Earth are the tilt of Earth on its axis and the topography of Earth. Describe how these two factors affect the climate patterns of Earth.

Answers

The answer is
You need to look at the top of the axis
You need to look

Answer:

If you are saying How much does the tilt of the Earth affect the climate

This varies between a tilt of 22.1 and 24.5 degrees over a period of about 41,000 years. This trend not only affects the average temperature of the earth, but also how prominent the seasons are. Procession is a wobble in the earth's axis.

do forces that act a distance come in pairs?

Answers

Answer:

Forces come in pairs.

Explanation:

Distances are between two points. The distance from A to B is equal but opposite the distance from B to A.

The gravitational potential energy of the ball changes as it bounces. Where is the ball located when its gravitational potential energy is greatest? Where is the ball when its gravitational potential energy has the least value?

Answers

When the planet is closest to the Sun, speed v and kinetic energy are the highest, and gravitational potential energy is the lowest. When the planet moves farther away, the speed and kinetic energy decrease, and the gravitational potential energy increases.

advantages of writing very large and very small numbers in the terms of power of ten​

Answers

Answer:

Large numbers might create fuse, be confusing and if you miss even one of the zeros it is a very big deal in a situation when you are making a spaceship. Hope this answers your questions :) Merry Christmas. Have fun.

Explanation:

2

Explanation:

for saving space in large numbers

and small numbers for multiplying easily

can you fit all the planets between earth and moon

Answers

Answer: No, planets of our solar system, with or without Pluto, cannot fit within the mean lunar distance. An additional 3,500 km is needed to squeeze in Neptune

HEELPPPP!! A train travels 195 kilometers in 4.0 hours, and then 125 kilometers in 3.0 hours. What is its average speed?

Answers

Answer:

Train A has a speed 20 miles per hour greater than that of train B. If train A travels 300 miles in the same times train B travels 220 miles, what are the speeds of the two trains?

2. A woman has a total of $13,000 to invest. She invests part of the money in an account that pays 11% per year and the rest in an account that pays 12% per year. If the interest earned in the first year is $1490 how much did she invest in each account?

Explanation:

“Applications of thermal expansion in solids, liquids and gases.”
(Two for each states of matter)​

Answers

Thermal expansion is the tendency of matter to change its shape dimensions, density in response to a change in temperature.

The following are applications of thermal expansion in various matter.SolidsThe principle of thermal expansion is used in thermostat to regulate the temperature of heating device e.g Electric pressing Iron.Rivets are used to hold steel plates together very tightly.

 

  2. Gases

Hot-air balloons are an application of thermal expansionGases turbine

    3. Liquids

Engine CoolantsVolume of thermometer

Learn more about Expansion of matter here:

https://brainly.com/question/518065

which statement is not correct about force.

A, force causes deformation
B, force xauses accleration
C, if there is no force, there is no motion
D, force emerges due to interaction.​

Answers

Answer:

c

Explanation:

without force motion won't take place

Which statement most completely describes a Lewis electron dot diagram? A.
a representation of the electrons that form bonds in a molecule
B.
a representation of the total number of electrons in an element, compound, or ion
C.
a representation of the total number and arrangement of electrons in an element, compound, or ion
D.
a representation of the arrangement of valence electrons in an element, compound, or ion

Answers

Answer:

D.

Explanation:

it is indeed a representation of how the valence electrons in an element,coumpound, or ion are arranged.

to ensure you i was just quized on this and D is the correct anwser

A representation of the arrangement of valence electrons in an element, compound, or ion -  statement most completely describes a Lewis electron dot diagram. Hence, option (D) is correct.

What is Lewis electron dot diagram?

If the compound's molecular formula is known, electron dot structures or Lewis dot formulas can be drawn.

It describes the type of bond and the placement of the atoms within the molecule that are joined together. In honor of American chemist Gilbert Newton Lewis, molecules are depicted as having a Lewis electron dot structure or simply a Lewis structure.

Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Common names for Lewis dot structures include electron dot structures and Lewis structures. Lewis described an acid as an electron pair acceptor, while a base is an electron pair giver.

Learn more about  Lewis electron dot diagram here:

https://brainly.com/question/19093827

#SPJ2

which constellation is in contrast with ursa major

Answers

Answer: Ursa Major (/ˈɜːrsə ˈmeɪdʒər/; also known as the Great Bear) is a constellation in the northern sky, whose associated mythology likely dates back into prehistory. Its Latin name means "greater (or larger) she-bear," referring to and contrasting it with nearby Ursa Minor, the lesser bear.

Bordering constellations: Draco; Cameloparda...

Brightest star: ε UMa (Alioth) (1.76m)

Meteor showers: Alpha Ursa Majorids; Leonid...

Symbolism: the Great Bear

Other Questions
Would you support introducing Large Mouth Bass into California pond ecosystems in an attempt to control the American Bullfrog population? Having children in your care with TBI can be a challenge (traumatic brain injury why is that Technological advanced and how it impacted the pioneers If you know this you are an honor roll kid Your fingernails grow at an average rate of 2.25 inches per year. If they grow at an average rate, you never cut them, and they did not break, how much would your fingernails grow in 4.5 years?BRAINLIEST*GIVE ME BRANILST PLZ! As a teenager, what is your stand on each of the following issues? How can you work with others to help support these concerns? share your feelings on roads being built in the rainforest. In two or more complete sentences, describe the transformation(s) that take place on the parent function, f(x) = log(x), to achieve the graph of g(x) = log(-2x-4) + 1. The event marking the beginning of the renaissance period was. atteo spends a total of 38 min exercising. He walks for 6 min to warm up and then runs at a constant rate of 8 min per mile for the rest of the time. Matteo says that he ran 4.75 mi. Is he correct? Explain your reasoning. which of the following describes a major sector of a circle which of the following statements best summarizes the overall meaning of "charming billy"A. US soldiers in the Vietnam War were proud to represent their country.B. Soldiers from the Vietnam War were less effective because some of them has been drafted.C. The US military did not properly prepare soldiers for the fighting conditions in Vietnam.D. The soldiers in the Vietnam War needed training in both physical and psychological survival tactics. Scientists say we should sleep 3/8 of a day.How about many hours is this Name one protein within the cell membrane and describe its function. A plane travels 460 miles per hour. how many miles does the plane travel in feet per second? how much should you give your hairdresser for christmas Earth's internal heat source concept map. What is an equivalent expression to 7x - 3y + 8x ? provided service to srijana store and received cash Rs 5000. WORTH 10 WILL CROWN John finished his English assignment in 1/3 hours. Then he completed his chemistry assignment in 2/5 hours. What was the total amount of time John spent doing these two assignments?these two assignments?