Y’all what’s this I don’t feel like doing it and I’ll give brainlist too

Yall Whats This I Dont Feel Like Doing It And Ill Give Brainlist Too

Answers

Answer 1

Answer:

2.Closed System: A closed system is a thermodynamic system where energy can be exchanged with its surrounding but not matter. Open System: Open systems can exchange matter with the surrounding. Closed System: Closed systems cannot exchange matter with the surrounding. Open System: The mass of the system will vary with time in open systems.

Explanation:

1.The particle model is the name for the diagrams used to draw solids, liquids and gases. In the model, the particles are shown as circles or spheres. However, the particles in ice, liquid water and steam look the same because they are all water, but in different states of matter. Why do we use the particle model in science?

3.An open system can be defined as a system which can exchange both matter and energy with the surrounding. For example, the earth can be recognized as an open system. In this case, the earth is the system, and space is the surrounding. Sunlight can reach the earth surface and we can send rockets to space.

Yall Whats This I Dont Feel Like Doing It And Ill Give Brainlist Too

Related Questions

A student was asked to determine the concentration of ammonia, a volatile substance used in the clinical setting as a respiretory stimulant to prevent fainting. First the student pipetted 25.00 mL of the cloudy ammonia solution into a 250.0 mL conical flask. 50.00 mL of 0.100 mol L' HCl(aq) was immediately added to the conical flask which reacted with the ammonia in solution. The excess (unreacted) HCI was then titrated with 0.050 mol L- Na2CO3(aq). 21.50 mL of Na2CO3(aq) was required. Calculate the concentration of the ammonia in the cloudy ammonia solution.​

Answers

This question is describing two chemical equations whereby the concentration of ammonia has to be determined. The first reaction is between 25.00 mL of ammonia and 50.00 mL of 0.100-M HCl whose excess was neutralized with 21.50 mL of 0.050-M Na₂CO₃ and thus, the concentration ammonia in the cloudy solution was determined as 0.114 M.

First of all we need to go over the titration of the excess HCl with Na₂CO₃ by writing the chemical equation it takes place when they react:

[tex]2HCl+Na_2CO_3\rightarrow 2NaCl+CO_2+H_2O[/tex]

Whereas the mole ratio of HCl to Na₂CO₃ is 2:1 and the volume of the HCl leftover is determined as follows:

[tex]V_{HCl}^{leftover}=\frac{2*0.050M*21.50mL}{0.100M} =21.5mL[/tex]

Next, we infer that the consumed volume of HCl by the ammonia solution was:

[tex]V_{HCl}^{consumed}=50.00mL-21.50mL=28.5 mL[/tex]

Then, we write the chemical equation that takes place between ammonia and HCl:

[tex]HCl+NH_3\rightarrow NH_4Cl[/tex]

Whereas the mole ratio is now 1:1, which means that the concentration of ammonia was:

[tex]M_{NH_3}=\frac{28.5mL*0.100M}{25.00mL}\\\\ M_{NH_3}=0.114M[/tex]

Learn more:

(Titration) https://brainly.com/question/15687419(Titration) https://brainly.com/question/25328286

You have a block of an unknown metal. Which properties would be most helpful in determining what it is? If it could be

Answers

the distributive property would work best

Explain the verse below in your own words in a little summary.




Hebrews 11:7

Answers

God had warned Noah of the flood and directed him to build an ark. Noah had faith in God and began building.

Answer:

God Warned Noah for the Flood comindg to Earth to wash away all the bad people's lives and god also said get couple animals girls and boys then build an ark then bring your family and food there to then noah had a faith in god so he obey and start builind the ark in a top of a mountain

Explanation:

Hebrews 11:7

Select True or False: The entropy of a perfectly ordered crystalline substance at 0 K is 0 J/mol. Bloom's Level: Understand

Answers

True, the entropy of a perfectly ordered crystalline substance at 0 K is 0 J/mol.

The third law of thermodynamics states that, the entropy of a system approaches a constant value as the temperature of the system approaches absolute zero.

The entropy of any perfectly ordered, crystalline substance at absolute zero temperature is zero.  That is, the entropy of a pure, perfect crystalline substance at 0 K is 0 J/K.

Thus, we can conclude that the given statement is true.  The entropy of a perfectly ordered crystalline substance at 0 K is 0 J/mol.

Learn more about third law of thermodynamics here: https://brainly.com/question/1156831

Draw the Lewis Structure for C2F4. b. Total RED's c. Nonbonding RED's d. Electron-Pair Geometry e. Molecular Shape f. Is it Polar, Nonpolar or Ionic

Answers

The molecule C2F4 has a trigonal planar molecular and electron pair geometry.

The shape of a molecule is dependent on the number of electron pairs that surround the central atom in the molecule. In the molecule C2F4, there are two central carbon atoms.

Each of the central carbon atoms have a trigonal planar molecular and electron pair geometry. C2F4 is a symmetrical molecule so it is nonpolar and has a zero dipole moment.

Learn more: https://brainly.com/question/7558603

As part of an investigation into the strength of electrostatic forces between molecules of water, a student will measure the melting point temperature. Which part of the experimental design does this describe?(1 point)
determining the procedure
determining what data to collect
deciding on the appropriate equipment
deciding on the number of trials to perform


Which experimental design would be best to use in investigating the boiling points of water and ethanol?

Heat samples of water and ethanol in two separate beakers using a Bunsen burner. Measure the temperatures at which the samples boil using a thermometer. Record these temperatures as the boiling points.
Mix samples of water and ethanol in a beaker, then heat using a Bunsen burner. Measure the temperature at which the sample boils using a thermometer. Record this temperature as the boiling point.
Heat samples of water and ethanol in two separate beakers using a Bunsen burner. Measure the temperatures at which the samples boil using a thermometer. Conduct several trials and record the average temperatures as the boiling points.
Mix samples of water and ethanol in a beaker, then heat using a Bunsen burner. Measure the temperature at which the sample boils using a thermometer. Conduct several trials and record the average temperature as the boiling point.

Which change happens when a substance melts?(1 point)
The vibration of the molecules produces enough heat to weaken the forces of attraction between the molecules of the substance.
Heat energy overcomes the forces of attraction between the molecules of the substance, so the molecules can move more freely.
Heat energy forces the molecules of the substance farther apart until the rigid structure of the solid breaks.
The molecules of the substance move farther apart, which pulls on the intermolecular bonds between them.
Which change occurs to cause water to boil into steam?(1 point)

The addition of kinetic energy causes the motion of water molecules to overcome gravitational forces.
The addition of kinetic energy causes the motion of water molecules to overcome gravitational forces.
The removal of kinetic energy causes the motion of water molecules to overcome electrostatic forces.
The removal of thermal energy causes the motion of water molecules to overcome gravitational forces.

Answers

Answer:

1) B. determining what data to collect

2) C. Heat samples of water and ethanol in two separate beakers using a Bunsen burner. Measure the temperatures at which the samples boil using a thermometer. Conduct several trials and record the average temperatures as the boiling points.

3) B. Heat energy overcomes the forces of attraction between the molecules of the substance, so the molecules can move more freely.

4). The addition of thermal energy causes the motion of water molecules to overcome electrostatic forces.

Explanation:

I think these are the answers, i'll confirm when I finish the test.

In an experiment it is known what quantity has to measured, thus the measurement of melting point has been determining what data to collect. Thus, Option B is correct.

To investigate the boiling point of water and ethanol, the samples has to boiled at constant parameters and the data has been collected with several trials. Thus, option C is correct.

Melting has been described as the change of the solid to the liquid state. With melting, there has been heat energy higher than the force of attraction allowing the molecules to move freely. Thus, option B is correct.

The boiling has been the change in the water at liquid state to the gaseous state. With boiling there is thermal energy capable of increasing the motion of water molecules overcoming electrostatic force.

For more information about melting, refer to the link:

https://brainly.com/question/12499685

which is the compound that has the higher boiling point and explain why we see the

differences we do

a. ethane vs. ethene

b. heptyne vs. pentyne

c. octane vs. octanal

thanks!

Answers

Answer:

b I think it is the correct answer

In each of the combinations, predict the more electronegative element based on its position on the
periodic table. Then look up the actual electronegativities. Circle the reaction pair that should
actually caust a reaction.
More
Combination Combination electronegative
A
B
element based on
position on table
Ba + Fe2-
Ba?- + Fe
Actual
Actual
electronegativity electronegativity
of element of element
a)
Ba =
Fe=
b)
)
Sn + Hg
Sn- + Hg
Sn =
Hg =
c)
)
Na + Mg2+
Na + Mg
Na=
Mg =
=
Zn + CO2-
Zn?- + Co
Zn =
Co=

Answers

c)

)

Na + Mg2+

Na + Mg

Na=

Mg =

=

Zn + CO2-

Zn?- + Co

Zn =

Co=

Equation for the incomplete combustion of methanol

Answers

Answer:

The basis for incomplete combustion is that instead of carbon dioxide being produced alongside water, carbon monoxide and carbon is produced instead, the carbon being released as soot. That handily sets the products up for the equation.

And combustion is simply a reaction between a fuel, in this case, methanol and oxygen.

The chemical formula for methanol is CH3OH. Simply write the reactants and products as a chemical equation and balance it, and you have the equation.

Explanation:

A block has 73 kg is being pushed and accelerated at rate of 10 m/s. what force is being applied to the block?

A-730 N
B-7.3 N
C-7300 N
D-730 Kg

Answers

Answer:

730 N

Explanation:

force =mass×acceleration

force= 73kg × 10 m/s

f=730N

Van der Waals bonds initiate
a) Between non-metals
b) Within ionic binds
c) Between metals
d) With H-bond
e) All of the above​

Answers

I think e no

I am giving you hint

PLEASE HELP WILL GIVE BRAINLIEST

Answers

Answer:

Explanation:

Gravity pulls the balls down the ramp, and the force of gravity is bigger on larger-mass objects. The extra force on the bigger ball means that it has more energy when it gets to the bottom of the ramp and consequently travels more before stopping.

How many species are known to be living on Earth?

Answers

Answer:

8.7 million species

Explanation:

Scientists have estimated that there are around 8.7 million species of plants and animals in existence.

. What mass of ammonium chloride must be added to 250. mL of water to give a solution with pH
4.85? [Kb(NH3) = 1.8 x 10-1
a. 4.7 g
b. 75 g
c.2.3 x 10-ºg
d. 19 g
e.10g

Answers

The mass of ammonium chloride that must be added is : ( A ) 4.7 g

Given data :

Volume of water ( V )  = 250 mL = 0.25 L

pH of solution = 4.85

Kb = 1.8 * 10⁻⁵

Kw = 10⁻¹⁴

Given that the dissolution of NH₄Cl gives NH₄⁺⁺ and Cl⁻ ions the equation is written as :

NH₄CI  +  H₂O  ⇄  NH₃ + H₃O⁺

where conc of H₃O⁺

[ H₃O⁺ ] = [tex]\sqrt{Ka.C}[/tex]   and Ka = Kw / Kb

∴ Ka = 5.56 * 10⁻¹⁰

Next step : Determine the concentration of H₃O⁺  in the solution

pH = - log [ H₃O⁺ ] = 4.85

∴ [ H₃O⁺ ] in the solution = 1.14125 * 10⁻⁵

Next step : Determine the concentration of NH₄CI in the solution

C = [ H₃O⁺ ]² / Ka

  = ( 1.14125 * 10⁻⁵ )² /  5.56 * 10⁻¹⁰

  = 0.359 mol / L

Determine the number of moles of NH₄CI in the solution

n = C . V

  = 0.359 mol / L  * 0.25 L =  0.08979 mole

Final step : determine the mass of ammonium chloride that must be added to 250 mL

mass = n * molar mass

         = 0.08979 * 53.5 g/mol

         = 4.80 g  ≈ 4.7 grams

Therefore we can conclude that the mass of ammonium chloride that must be added is 4.7 g

Learn more about ammonium chloride : https://brainly.com/question/13050932

A 4.0 L balloon has a pressure of 406 kPa. When the pressure increases to 2,030 kPa, what is the volume? *
0.4 L
0.8 L
0.2 L
1 L

Answers

The new volume when pressure increases to 2,030 kPa is 0.8L

BOYLE'S LAW:

The new volume of a gas can be calculated using Boyle's law equation:

P1V1 = P2V2

Where;

P1 = initial pressure (kPa)P2 = final pressure (kPa)V1 = initial volume (L)V2 = final volume (L)

According to this question, a 4.0 L balloon has a pressure of 406 kPa. When the pressure increases to 2,030 kPa, the volume is calculated as:

406 × 4 = 2030 × V2

1624 = 2030V2

V2 = 1624 ÷ 2030

V2 = 0.8L

Therefore, the new volume when pressure increases to 2,030 kPa is 0.8L.

Learn more about Boyle's law calculations at: https://brainly.com/question/1437490?referrer=searchResults

What quantity of energy is required to heat a piece of iron wighing 1.31 g from 25.0 degrees celsius to 46.0 degrees celsius

Answers

the mass energy of telegranium

The quantity of energy required to heat a piece of iron weighing 1.31 g from 25.0 degrees Celsius to 46.0 degrees Celsius is 2.93 calories.

What is energy?

The ability or power to perform tasks, such as the ability to move an object (having a certain mass) by exerting force.

Energy can exist in many forms, including electrical, mechanical, chemical, thermal, and nuclear, and it can also change its form.

The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change, can be used to determine the amount of heat acquired or lost by a sample (q).

Q = mcΔT

Q = 1.31 g x 449 x 21° C = 12.26 joule

12.26 /1 x 1 cal / 4.189= 2.93 calories

Therefore, the quantity of energy required to heat a piece of iron is 2.93 cal.

To learn more about energy, refer to the link:

https://brainly.com/question/22920370

#SPJ2

I have a hard time telling the difference between convection, conduction, and radiation, anybody got any tips?

Answers

Conduction
In conduction, heat transfer takes place between objects by direct contact.

Convection

In convection, the heat transfer takes within the fluid.

Radiation

In radiation, heat transfer occurs through electromagnetic waves without involving particles.

How many moles does 205 g of helium,He, contain ?

Answers

Answer:

4.002602

Explanation:

Seems Am Converting Between Grams Helium And Mole.

No. of moles = mass / relative molecular mass
n = m / Mr
n = 205 g / 4 g/mol
n = 51.25 mol

Heart, 5 stars, and Brainiest if right! Answer needed ASAP PLEASE!What type of forces do not change the motion of an object?
A. Acceleration forces
B. Balanced forces
C. Inertia forces
D. Unbalanced forces

Answers

Answer:

unbalanced force

Explanation:

pls mark me brainliest

Answer:

B. balanced forces

Explanation:

the motion of an object will not change if the forces pushing or pulling the object are balanced

How many electrons does chlorine need to gain in order to be like Argon ?


- 2 electrons

- 3 electrons

- 1 electron

Answers

Chlorine is in group 7 and thus requires 1 more valence electron in order to form a full valence shell as Argon (group 8 or also known as group 0). Therefore, the answer is 1 electron

Safety considerations
• Sodium Hydroxide (please insert one statement of caution from MSDS)

Answers

Answer:

d took the test

Explanation:

What Is the answers?

Answers

Answer:

oxygen is responsible for rusting

Oxygen causes the metal can to rust

If there is .03L of NaOH in a flask, how can a .12M solution of H2SO4 be used to determine the concentration of NaOH in the reaction?

Answers

The concentration of NaOH in the reaction can be determined using the Titration method.

The concentration of NaOH in the reaction can be determined by titration.

A burette if filled with the known concentration of H₂SO₄ and then titrated against the known volume of NaOH in a conical flask. An indicator is used in order to determine the end-point of the titration process. At the end-point of the titration, the volume of acid used is recorded.

Next, we will write the balanced chemical equation of the reaction.

The balanced chemical equation for the reaction is

2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O

This means 2 moles of NaOH is required to neutralize 1 mole of H₂SO₄

Now, we can determine the concentration of NaOH by using the titration formula.

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

Where [tex]C_{A}[/tex] is the concentration of acid

[tex]V_{A}[/tex] is the volume of acid

[tex]C_{B}[/tex] is the concentration of base

[tex]V_{B}[/tex] is the volume of base

[tex]n_{A}[/tex] is the mole ratio of acid

[tex]n_{B}[/tex] is the mole ratio of base

Then, we put the respective parameters, including the volume of acid determined from the titration process, into the formula to determine the concentration of the NaOH.

Hence, the concentration of NaOH in the reaction can be determined using the Titration method.

Learn more on titration here: https://brainly.com/question/25290615

Which of the following describes a heterotroph?

Heterotrophs get their energy directly from the sun.
Heterotrophs conduct photosynthesis.
Heterotrophs can create their own food.
Heterotrophs cannot create their own food.

Answers

heterotrophs cannot create their own food and rely on others for food

heterotrophs cannot create their own food.

heterotrophs are like animals and humans so humans can’t make their own food.

Which molecule does not obey the Octate rule of valence electrons .

BeCl2

FeCl2

CuCl2

ZnCl2​

Answers

Explanation:

Which molecule does not obey the Octate rule of valence electrons .

BeCl2

FeCl2

CuCl2

ZnCl2

→BeCl2

Explaination:

BeCl2 violates the octet rule because the boron should be in a suitable valence state such that it binds to 3 chlorines. However, in this molecule boron is associated with six electrons.

Answer:

BeCl2

Explanation:

hope Its useful for you

[tex] \\ \\ [/tex]

kk

what is the result of collisions of particles with an object? *

A. pressure on the object
B. pressure away from the object
C. the object gets lighter
D. the object gets heavier

Answers

Answer:

Particle collisions cause pressure.

Explanation:

The fast motion of gas particles gives them a relatively large amount of kinetic energy. Recall that kinetic energy is the energy that an object possesses because of its motion. The particles of a gas move in straight-line motion until they collide with another particle or with one of the walls of its container.

According to Hebrews 11, what did Abraham believe God would do if Isaac was slain as a sacrifice?

Answers

Answer:

He thought he was going to bring Isaac back from the dead. They ended up sacrificing the donkey instead.

Which are the two key factors that affect the rate of weathering of rocks?

Select 2.


A Climate


B Rock Type


C Bedrock

Answers

Answer:

A and B.

Explanation:

Climate:

High temperatures and greater rainfall increase the rate of chemical weathering. Lower temperatures can break rocks to by freezing water inside of a rock cracks. When it freezes it expands the water and forces the crack of the rock to expand.

Rock Type:

Certain types of rock are very resistant to weathering. Igneous rocks, especially intrusive igneous rocks such as granite, weather slowly because it is hard for water to penetrate them. Other types of rock, such as limestone, are easily weathered because they dissolve in weak acids.

13. Which has the largest atomic radius?
A. fluorine B. chlorine C. bromine
D. a bromine anion with a charge of 1-

Answers

Answer:

bromine

Explanation:

Hello do anyone on here no something about Gizmos Fan Cart Physics?

Answers

Answer:

yes here is the answer key

for the last question it is a challenge question, here is the answer:

(A) The mass of the cart is 1.214 kg

(B) The mass of one fan is 1.262 kg

(C) The mass of one of the draggable mass units is 3.131 kg

Explanation:

Other Questions
For the point P(-25,10) and Q,(-18,15) find the distance d(P,Q) and the coordinates of the midpoint M of the segment PQ. An ethical issue is a situation which reveals errors in human activity? True or false???? what are the holy books of Buddhism? pargraph about movie review who is responsible for approving and incorporating cities in georgia? One side of a square garden is 8 feet long. How can you find the area of That is thethe garden? Active transport moves molecules from and to which concentration?A: high to lowB: low to highC: low to lower What traits do you believe a president should have? Why? S is a geometric sequence.a) (1x + 1), 1 and (rootx - 1) are the first three terms of S.Find the value of x.You must show all your working.b) The 5 term of S can be written in the form a V2 + bwhere a and b are integersFind the value of a and the value of b Helppppp I need answerssss for all questions the ones I did are wrong A car accelerates at a constant rate of 3 m/s2 for 5 seconds. If it reaches a velocity of 27 m/s, what was its initial velocity?A 15 m/sB 42 m/sC 12 m/sD 2.1 m/s Boron and antimony are good elements to use as bennett is a 12-year-old boy whose bmi-for-age falls at the 90th percentile on the bmi-for-age growth chart. bennett is Which group is the primary source of financial support that benefits all wildlife species? When you are reading a story, how can you tell WHEN something is happening? A) In a story, everything happens in the present. B) Unless the setting and time are stated, you cannot tell. C) You can tell by paying attention to verb tenses. D) It is always the past; otherwise, you couldnt be reading it yet. How long does it take for a cartilage piercing to stop hurting been trying to solve this, need help what were the 4 visits in the past that Scrooge and the Ghost make PLEASE HELP WILL MARK BRAINIEST!!!!!! An open-top box is to be constructed from a sheet of tin that measures 36 inches by 20 inches by cutting out squares from each corner as shown and then folding up the sides. Let V(x) denote the volume of the resulting box.