write a balanced equation for the synthesis reaction that occurred in experiment 1. include physical states.

Based on these characteristics, amino acids can be categorized Asparagine (Asn), Glutamine (Gln), Serine (Ser), Threonine (Thr), and Tyrosine are polar, neutral amino acids (Tyr).

Alanine, Leucine, Isoleucine, Proline, Phenylalanine, Methionine, and Valine are among the hydrophobic amino acids (Val) Histidine (His), Arginine (Arg), and Lysine are amino acids with positive charges (Lys) Amino acids with negative charges include glutamic acid and aspartic acid (Asp) (Glu) It's critical to note that these categories are generalizations and that an amino acid's actual behavior might depend on its surroundings and interactions with other molecules.Based on these characteristics, amino acids can be categorized Asparagine (Asn), Glutamine (Gln), Serine (Ser), Threonine (Thr), and Tyrosine are polar, neutral amino acids (Tyr). It's critical to note that these categories are generalizations and that an amino acid's actual behavior might depend on its surroundings and interactions with other molecules.

learn more about  amino acids   here:

https://brainly.com/question/14583479

#SPJ4

The availability of a substitute changes people's decision to buy the "lesser" product through the fact that determines the significant function and attributes of the substituted facts and figures.

The substitution effect may be defined as a product or service's decrease in demand or sales when consumers switch to alternative but comparable products that are cheaper.

This significant effect takes place when the product's price increases or a closely related product's price decreases. Close substitutes for a product affect the elasticity of demand.

If another product can easily be substituted for your product, consumers will quickly switch to the other product if the price of your product rises or the price of the other product declines.

Therefore, the availability of a substitute changes people's decision to buy the "lesser" product through the fact that determines the significant function and attributes of the substituted facts and figures.

To learn more about Substitute effects, refer to the link:

https://brainly.com/question/1319399

#SPJ1

Answer:

21

Explanation:

........................

Answer: 21

Explanation:

Disulfide bridges stabilize the tertiary level of protein structure.

Although many proteins are composed of many subunits, their organization into quaternary structures is not universal. Usually, disulfide bonds will link β-sheets, α-helices, and loops; this indicates that they predominantly maintain tertiary structure, as opposed to secondary structure, which refers to local conformations and is maintained mostly by hydrogen bonds, making proteins more stable and less likely to unfold. As the pH of a solution rises, acidic groups on proteins are deprotonated, resulting in a net positive charge on the protein. The spatial structure of a protein, however, is critical to its activity. It can only recognize and bind to the molecules it's designed to work with in its natural state.

To learn more about disulfide bridges, click here:

https://brainly.com/question/28483608

#SPJ4

The following options correctly express the relationship between the volume and temperature of a gas at constant pressure is C. The gas increase in volume because the particles increase in size

Charles' law is a law that studies the behavior of gases in chemistry, such as how temperature affects the volume of a gas under constant pressure. Charles's law describes empirical relationships in the form of special cases of the general gas law and can be derived from the kinetic theory of gases assuming an ideal gas.

According to Charles' law, if a gas is contained in a closed chamber with constant mass and constant pressure, then its volume is directly proportional to its absolute temperature. So when the volume of a gas is directly proportional to the constant temperature, when the temperature of the gas increases, the volume will also increase.

Learn more about kinetic theory at:

https://brainly.com/question/9924094

#SPJ4

Magnesium was 5.0g before heating.

Go through the given link below to know more about magnesium:-

https://brainly.com/question/5759562

#SPJ4

No, a 1.5 M solution cannot be made from a 0.98 M solution.

Explain molarity

Probably the most frequently used unit of measurement for solution concentration is molarity, abbreviated as (M). The ratio of the number of liters of solution to the number of moles of solvent is known as molarity.

Knowing the molarity (M) of the solution of a specific volume will allow you to calculate the number of moles (n) of a chemical dissolved in a solution (V). The quantity of solvent moles per kilogram is known as molality, which is a property of solutions. Since molality solely depends on the masses of the solute and solvent, which are unaffected by changes in temperature and pressure, it is a particularly advantageous way to estimate concentration.

To know more about molarity use link below:

https://brainly.com/question/17138838

#SPJ1

Density of the given sample is 12.66 grams per milliliter.

Mass per unit volume is the definition of a material's density. The degree to which matter is packed together is fundamentally measured by density. It is a particular physical characteristic of a specific thing.

Density = mass/volume

Given mass = 50g

Given Volume = 3.95mL

According to question, we are required to find the density in units : grams per milliliter

Since the given values for mass and volume are grams and milliliters respectively, no change in units is required.

Putting the given values in the formula, Density = mass/volume

Density = 50/3.95

Density = 12.658 grams per milliliter

We can say, Density = 12.66 grams per milliliter

To know more about density, click here : https://brainly.com/question/6838128

#SPJ4

The compound that has been shown in the SDS is glycerol.

We know that the term SDS is the acronym that stands for the safety data sheet. This is the sheet that is able to show us the behavior of a substnace. We know that it is possible to classify the compound by looking at the sheet.

In the sheet we have been told that the compound is non volatile and that the compound does not so easily ignite and it can be safely stored in a humid condition.

This tells us a lot about the properties of the compound.

Learn more about SDS:https://brainly.com/question/2471127

#SPJ1

Answer:

4.98x10^-3 

Explanation:

True: Chemists knew that something other than mass influences the properties of elements.

The periodic table organizes elements according to periodic properties, which are recurring trends in physical and chemical properties. First, electrons are added one at a time across a period, from left to right. As this occurs, the electrons in the outermost shell experience increasing nuclear attraction, bringing them closer to the nucleus and more tightly bound to it. Second, moving down a column in the periodic table loosens the outermost electrons' bond to the nucleus. Thus, number of valence electrons, or valency, other than mass influences the properties of elements.

This occurs because the number of filled principal energy levels (which protect the outermost electrons from nucleus attraction) decreases within each group. The periodicity observed in the elemental properties of atomic radius, ionization energy, electron affinity, and electronegativity are explained by these trends.

To know more about the properties of elements, refer to the following link:

https://brainly.com/question/17194821

#SPJ4

Based on the specific heat of water, the final temperature of the liquid that is formed when 50 grams of ice and 500 g of water are mixed together is 23.3 °C.

The final temperature of the liquid that is formed when 50 grams of ice and 500 g of water are mixed together is determined as follows:

Heat change = mc(T_f - Ti)

The heat of fusion = mL

where;

Heat lost water = mc(T_f - Ti)

c for water = 4.19 J/J/(g°C)

Heat lost water = 500 * 4.18 * (T_f - 20)

Heat lost water = 2090T_f - 41800

Heat gained by ice = mc(T_f - Ti) + mL + mc(T_f - Ti)

c for ice = 2.03 J/J/(g°C)

Heat gained by ice = 50 * 2.03 * {0 - (-20)} + 50 * 0.334 + 50 * 4.18 * (T_f - 0)

Heat gained by ice = 2046.7 + 209T_f

From heat gained = heat lost;

2046.7 + 209T_f = 2090T_f - 41800

2090T_f - 209T_f = 2046.7 + 41800

1881T_f = 43846.7

T_f = 23.3 °C

Learn more about specific heat at: https://brainly.com/question/21406849

#SPJ1

The synthesis of proteins machinery detects the tRNA anticodon, thus based on the findings of the Benzer experiment, protein would also have valines wherever glycines ordinarily are.

C5H11NO2, a crystallized essential amino acid, is a component of both vegetable and animal proteins. Your body uses branched-chain amino acids to help create energy. Valine is mostly present in protein-rich foods such meat, fish, soy, as well as dairy.

A sectioned amino acid called valine is made up of the amino acid glycine with the hydrogen linked to the alpha-carbon replaced by an isopropyl compound. It functions as a plant molecule and a metabolite for Daphnia magna.

To know more about valine visit:

https://brainly.com/question/11005856

#SPJ4

A gas sample consisting of 2.0 moles of hydrogen and 1.0 mole of oxygen is collected over water at 29ºC and 75 kPa. 48 kPa is the partial pressure of the hydrogen in this sample. Therefore, option B is correct.

The term partial pressure is defined as the pressure that a gas, in a mixture of gases, would exert if it alone occupied the whole volume occupied by the mixture.

Total number of mole = 2 + 1

= 3 moles

Temperature = 29ºC

Total pressure = 75 kPa

partial pressure = mole fraction x total pressure

P V = n R T

= 48 kPa

The partial pressure of the hydrogen is 48 kPa

Thus, option B is correct.

To learn more about the partial pressure, follow the link;

https://brainly.com/question/13199169

#SPJ1

Your question is incomplete, most probably your question was

A gas sample consisting of 2.0 moles of hydrogen and 1.0 mole of oxygen is collected over water at 29ºC and 75 kPa. What is the partial pressure of the hydrogen in the sample?

A) 24 kPa

B) 48 kPa

C) 72 kPa

D) 75 kPa

This equilibrium potential (ENa) of the sodium concentration extracellularly is 116.

The amount of solute contained in a specific amount of solution is the substance's concentration. The molecular weight of solution in 1 L aqueous solution, or molarity, is used to express concentrations. Molar concentration, molality, mass percentage, components per thousand, milligrams, and parts per billion are examples of quantitative measurements of concentration.

The responsibility of the parties to take specific procedural steps during particular stages of antagonistic hearings in order to expedite the proceedings and the court's decision constitutes the principle of concentrating as one of the main server principles of civil procedures.

To know more about concentration visit:

https://brainly.com/question/10720472

#SPJ4

To build a model of liquid water. place your materials on the sheet of the paper. The  difficult about building the model is Connecting the marshmallows with toothpicks.

To build the model of the liquid water. place the materials on the sheet of paper. The regular size of marshmallows can be represent as the larger oxygen atoms, and the other mini marshmallows can be represent as the smaller hydrogen atoms. Then connect the marshmallows with the help of the toothpicks . Then create the total of four molecules.

Thus, the connecting the marshmallow with the help of the tooth picks was difficult about the building the model.

To learn more about model here

https://brainly.com/question/28744072

#SPJ4

first increase, then decrease When A is added, some B will be produced, so its concentration will rise. As D is produced and begins to inhibit E1, the rate of production of B will fall.

Since E2 causes C to be produced from B, the concentration of B will then fall.The concentration of intermediate product b will first increase as it is produced by enzyme e1, but it will eventually decrease as product d accumulates and inhibits enzyme e1, slowing down the production of intermediate b.sequence of enzymatically catalyzed reactions converts substrate a to final product d through a sequence of reactions involving the production of intermediate products b and c as shown. product d inhibits enzyme e1. if the enzymes e1-e3 are all present in a test tube and substrate a is added to the reaction mixture,e1 e2 e3 a b c d first increase, then decrease increase to a fixed value increase to the concentration of a added oscillate between zero and the concentration of a added remain at zero.

learn more about product  here:

https://brainly.com/question/22852400

#SPJ4

Taking into account the reaction stoichiometry, a mass of 14.86 grams of H₂ is needed to produce 84.2 grams of ammonia.

The balanced reaction is:

N₂ + 3 H₂ → 2 NH₃

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 34 grams of NH₃ are produced by 6 grams of H₂, 84.2 grams of NH₃ are produced by how much mass of H₂?

mass of H₂= (84.2 grams of NH₃× 6 grams of H₂)÷ 34 grams of NH₃

mass of H₂= 14.86 grams

Finally, 14.86 grams of H₂ are needed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Out of the given choices, the amino acids that has a side chain that is capable of hydrogen bonding with other polar molecules is Ser (Serine).

In the fields of organic and biochemistry, a side chain is a chemical group that is connected to the "main chain" or backbone of a molecule and serves as an attachment point for other parts of the molecule. A molecule's side chain is a hydrocarbon branching element that is coupled to a larger hydrocarbon backbone. This element is known as the side chain. There is only one amino acid on this list that possesses a R group that is able to form a hydrogen bond, and that is serine.  Both serine and threonine have hydroxyl groups located on the side chains of their amino acids. Because these polar groups are located so close to the main chain, they are able to make hydrogen bonds with the main chain.

To learn more about side chain, click here:

https://brainly.com/question/13640455

#SPJ4

1.81 moles are in 500 grams of BeCr2O7.

Molar mass of BeCr2O7 = 276.095 g/mol

500 g / 276.095 g/mol = 1.81 moles

What is moles?

Moles is a unit used to measure the amount of a substance. It is defined as the amount of a substance that contains the same number of atoms, molecules, ions, or electrons as the number of atoms in 12 grams of carbon-12 (C-12). This means that one mole of any substance will contain the same number of atoms, molecules, ions, or electrons as one mole of C-12. Moles are used in chemistry to measure the quantity of a substance. For example, when a chemist mixes two solutions together, they can use moles to calculate the amount of each substance that was mixed.

Therefore,  1.81 moles are in 500 grams of BeCr2O7.

To learn more about moles

Here: https://brainly.com/question/15356425

#SPJ1

A clear and precise depiction of the reactants and products is required for a comprehensive arrow-pushing mechanism.The reaction between H3C-H and CH3CH2OH occurs under acid-catalyzed .

conditions as follows: The acid catalyst, such as H2SO4, transfers a proton (H+) to the alcohol molecule's oxygen atom.resulting in the formation of a hydroxyl ion (CH3CH2O-). This hydroxyl ion is nucleophilic and attacks the alkane molecule's electrophilic carbon atom, generating a tetrahedral intermediate. As the intermediate forms, a link between the carbon atom and the proton is broken, resulting in the formation of a carbocation (H3C+). The link between the oxygen atom and the hydroxyl ion is also broken, resulting in the formation of a water molecule (H2O) and a new alcohol molecule (CH3CH2OH). The electron-rich oxygen atom stabilizes the carbocation, and the reaction is completed with the production of a new carbon-oxygen bond, yielding the result molecule CH3C-O-CH3. Under acid-catalyzed conditions, the overall arrow-pushing mechanism for this reaction is (Protonated alcohol) -> H3C+ + CH3CH2O- (Carbocation intermediate) -> CH3C-O-CH3 + H2O (Product).

learn more about proton  here:

https://brainly.com/question/1252435

#SPJ4

It can withstand high salt concentrations by using suitable solutes including potassium chloride for minimizing osmotic stress. It has many active transporters to keep potassium levels balanced and extremely acidic proteins to keep protein precipitation at bay.

Halobacterium salinarum also called as Halobacterium cutirubrum and Halobacterium halobium is a marine obligate aerobic archaeon that is exceptionally halophilic. Despite its common name, this was not a bacterium, but rather a component of the Archaea domain. Salted fish, skins, hypersaline lakes, and even salterns contain it.

sanitarium to pump large amounts of salt into its cell, but at the same time it can be a potentially lethal threat; if they are exposed to low molarity water, osmosis causes water to flood the cell causing the membrane to lyse or burst.

To know more about Halobacterium salinarum

https://brainly.com/question/28537339

#SPJ4

In order to arrange candidates for recruiting and recruitment purposes, businesses use applicant tracking systems (ATS).

The complete question is,

What do ATSs serve as their primary function?

To learn more about applicant tracking systems (ATS) refer to:

https://brainly.com/question/28436701

#SPJ1

Calculating Standard Product ATS, The allocation, presale backorder allocation, turnover, and (optional) on order quantity are added together to form the ATS.

Calculating Standard Product ATS, The allocation, presale backorder allocation, turnover, and (optional) on order quantity are added together to form the ATS. It's equal to the quantity of a product that is reserved for sale by default (the allocation value).

Repeating measurements is the best technique to determine the degree of uncertainty surrounding a set of data.

Mixture ~2 g

T2g = 64.7 ± 0.3°C

Cot 2g 6 e g o

Since all the electrons in t 2g are coupled up, the ligand must have a strong field, and that ligand is oxalate (C 2 O 4).

2−

[Co(C 2 O 4 ) 3] is the name of the substance.

3+

To learn more about Repeating measurements  refer to:

https://brainly.com/question/13494428

#SPJ1

Formula for lead nitrate with potassium iodide

Pb ( NO 3 ) 2 ( l ) ( l ) KI plus lead nitrate ( s ) Iodide of potassium (PbI 2). ( s ) KNO + Lead Iodide = ( l ) nitrate of potash.

Blood pressure is lowered, platelet aggregation is inhibited, and vessels are protected thanks to nitrate, which performs physiological actions comparable to those of NO [3, 37].

Why Nitrates Should Be Avoided. Stomach acid cannot degrade nitrates on its own. Rather, your gut biome may convert nitrate to nitrite, which may result in health issues like a higher risk of cancer. An inorganic, liquid chemical is nitrate.

To know more about nitate visit:

https://brainly.com/question/5346392

#SPJ4

The percent mass per mass concentration of the solution is  6.80 % (m/m).

We have to note that there are several units of concentration that we are going to have in the chemistry. One of the most common of the units of concentration is the percent concentration. We could look at the percent concentration in three ways;

Percent mass per mass(%m/m)

Percent volume per volume (%v/v)

Percent mass per volume (%m/v)

To convert from percent mass per volume to percent mass per mass, we convert by the density of the solution. In this case, the density of the solution is 1.2 g/mL

We then have;

% m/m = 5.67 % (m/v) * 1.2 g/mL = 6.80 % (m/m)

Learn more about percent concentration:https://brainly.com/question/12860532

#SPJ1

There are five orbitals with l = 2 and n = 3. This is because when l = 2, the subshell is known as the d-subshell, which can hold up to five orbitals.

Orbitals are regions of space where electrons of an atom are most likely to be found. They are three-dimensional regions around an atom's nucleus that are described by quantum numbers. Orbitals are organized into shells, or energy levels, which are determined by the principal quantum number. Electrons occupy orbitals according to the Pauli exclusion principle and the Hund's rule. Each orbital can hold up to two electrons, and the number of orbitals in a shell is equal to the number of electrons in that shell.

The orbitals are designated as 3d, 3dxy, 3dyz, 3dxz and 3dz2.

To learn more about orbital
https://brainly.com/question/20319149
#SPJ1

Secondary active transport of protons and sugar across a membrane into a cell is correctly described as protons moving down their concentration gradient while sugar moves against its concentration gradient.

Secondary active transport is defined as solute transport in the direction of increasing electrochemical potential coupled with facilitated diffusion of a second solute (usually an ion) in the opposite direction. The coupling agents are membrane proteins (carriers) that catalyze the facilitated diffusion of the driving ion as well as the active transport of a given solute. The review begins with some energetic considerations, followed by a presentation of the kinetics of secondary active transport.

The energy stored in the electrochemical gradients created by primary active transport can be released as the ions move back down their gradients. Secondary active transport moves other substances against their own gradients by utilizing the energy stored in these gradients.

Learn more about secondary active transport here: https://brainly.com/question/25783995

#SPJ4

Despite being limited by traditional gender roles, women had more access to ideas during the Enlightenment. Learn about the impact of the Enlightenment and the position of women prior to that time.

Discover how they were treated and discover the results of the advancement of women's rights and liberties. The simplest way to digest and analyse the information provided here about this historical period is probably to grasp Immanuel Kant's definition of the Enlightenment, which was that it was a time concerned with acquiring the freedom to use your own intelligence. During the Age of Enlightenment, particularly in France, several women participated in the salon culture. Philosophers or intellectuals would meet with friends for intellectually stimulating salons, usually held at someone's home.

Learn more about Enlightenment here

https://brainly.com/question/14368168

#SPJ4

Matter has evolved from the four elements to the new understanding of the quantum dimensions of matter.

Our understanding of matter has changed significantly over time. In ancient times, matter was thought to be made up of four elements: earth, air, fire, and water. The Greek philosopher Aristotle proposed a system of matter in which everything was made up of combinations of these four elements.

More recently, scientists have been studying the properties of dark matter and dark energy, which are thought to make up most of the universe, but are not yet well understood.

Overall, our understanding of matter has evolved from the ancient belief in four elements, to the modern understanding that matter is made up of atoms, which are made up of smaller subatomic particles and are affected by particle fields and quantum mechanics.

Learn more about matter:https://brainly.com/question/13962030

#SPJ1

In chemistry, a nucleophilic substitution is a class of chemical reactions in which an electron-rich chemical species (known as a nucleophile) .

show the movement of electrons in the following step of the reaction mechanism?

To learn more about mechanism refers to:

https://brainly.com/question/24509399

#SPJ4