Which would have the LEAST gravitational potential energy (GPE)? A ball sitting on the ground An airplane flying 30,000 feet above the ground A rock sitting on top of Mt. Everest​

Answer:

b. No

Explanation:

The question above is related to "The Law of Conservation of Mass." This law states that mass is neither created nor can it be destroyed. Even if a particular matter will be mixed with another substance or it undergoes chemical reaction, the mass of the matter will remain the same. Even with a change in phase, the mass of the matter will remain the same.

Answer:

Cave Crystal

Explanation:

I believe it's cave crystal because sand dunes, river deltas, and valleys are all examples of deposition.

Answer:

Several extractions is more effective than a single extraction.

Explanation:

When extraction is carried out multiple times, for instance, in this case, the extraction was carried out with three portions of the solvent rather than with just a single portion of the solvent, the amount of material left in the residue will be lower, because the extraction is more complete.

Several extractions with smaller volumes of solvent are more effective than a single extraction with a large volume of solvent.

Answer:

K₂ = 1.12s⁻¹

Explanation:

Based on Arrhenius equation:

ln K₂/K₁ = -Ea/R (1/T₂ - 1/T₁)

Where K is rate constant,

R is gas constant (8.314J/molK),

T is absolute temperature (In K) Of 1, initial state and 2, final state.

ln K₂/K₁ = -Ea/R (1/T₂ - 1/T₁)

ln K₂/2.10x10⁻²s⁻¹ = -82000J/mol/8.314J/molK (1/(273.15 + 58) - 1/(273.15 + 19))

ln K₂ / 2.10x10⁻²s⁻¹ = 3.976

K₂ / 2.10x10⁻²s⁻¹ = 53.3

Answer:

Law of Inertia it's also called Newton's first law of motion simply stated it means an object in motion tends to stay in motion or an object at rest tends to stay at rest unless the object is acted upon by an unbalanced force. Hope this helped!

Answer:

It means an object in motion tends to stay in motion or an object at rest tends to stay at rest unless the object is acted upon by an unbalanced force.

Answer:

The energy of particles of matter determines the matter's state. Particles of a gas have more energy than particles of a liquid, and particles of a liquid have more energy than particles of a solid. Therefore, in order for matter to change from a solid to a liquid or from a liquid to a gas, particles of matter must absorb energy. In order for matter to change from a gas to a liquid or from a liquid to a solid, particles of matter must lose energy.

The system will lose or gain energy as a result of changing its state, which is why energy will be involved in state changes.

Energy is a quantitative property that would be transferred to a body or even a physical system and is visible in term of heat as well as light during the performance of work.

Whenever a state changes, energy is involved. When matter transitions through one state to another, it either releases or absorbs energy. When matter transforms from such a liquid to a solid, for example, it loses energy. When matter transforms from a solid to a liquid, the opposite occurs.

To know more about energy.

https://brainly.com/question/1932868.

#SPJ2

Answer:

the second answer its science behind it

Answer:

b

Explanation:

Answer:

There are 76728.2 pounds of snow on the roof

Explanation:

To determine how many pounds of snow are on the roof,

First we will determine the mass of the snow in grams.

From the question,

Density of snow = 0.35 g/cm³

From

Density = Mass / Volume

To determine the mass, we will first find the volume.

From the question, a flat roof that is 35 by 43 feet has 28 inches of snow on it, that is, the height of the snow on the roof is 28 inches.

Area of the roof = 35 ft × 43 ft = 1505 ft²

Volume of the snow = Area of the roof × Height of the snow

Height of the snow = 28 inches

12 inches = 1 foot

∴ 28 inches = 28/12 feet = 2.3333 ft

Hence,

Volume of the snow = 1505 ft² × 2.3333 ft = 3511.62 ft³

Volume of the snow = 3511.62 ft³

This is the volume of the snow in cubic feet

Now, we will convert cubic feet (ft³) to cubic centimeter (cm³)

1 ft = 30.48 cm

and 1 ft³ = 30.48³ cm³ = 28316.84659 cm³.

If 1 ft³ =  28316.84659 cm³

∴ 3511.62 ft³ will be 3511.62 × 28316.84659 cm³ = 99438004.83 cm³

Hence, Volume of snow = 99438004.83 cm³

Now, we can determine mass of snow in grams

From

Density = Mass / Volume

Mass = Density × Volume

Mass = 0.35 g/cm³ × 99438004.83 cm³

Mass = 34803301.69 g

Now, we will convert the mass from grams to pounds

1 pound = 453.592 grams

If 453.592 grams = 1 pound

Then, 34803301.69 g will be 34803301.69 / 453.592 pounds = 76728.2 pounds

Hence, there are 76728.2 pounds of snow on the roof.

Answer:

C

Explanation:

Complete Question

You are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the enantiomeric excess?

Answer:

The value is  [tex]k  = 96 %[/tex]

Explanation:

From the question we are told that

   The  percentage of  enantiomer A is  A =  98%

    The  percentage of  enantiomer B is  B =  2%

Generally the enantiomeric excess is mathematically represented as

      [tex]k  =  \frac{A -B}{A+B}  *  100[/tex]

=>   [tex]k  =  \frac{98 -2}{98+2}  *  100[/tex]

=>   [tex]k  = 96 %[/tex]

Answer:

Fe^2+(aq) = 4.51 × 10^-11 M

Fe3+(aq) = 1.79 × 10^5 M.

Explanation:

So, the first thing to do is to to write out the chemical reaction showing the ionic reaction of the chemical species present in the chemical reaction;

4Fe^2+ (aq) + O2(g) + 4H^+ <---------------------------> 4Fe^3+(aq) + 2H2O(l).

The next thing to do is to determine or calculate for G° and the equilibrium constant,kc. Thus, the value of G° = 4(-4.6) + 2(-237.18) - {4(-78.87)} = -177.28 kJ/mol.

Therefore, the equilibrium constant = e^-∆G°/RT = 1.19 × 10^31.

Therefore the value for Fe^2+ and Fe^3+ can be determine as;

NB=> Recall that [Fe^3+]/[Fe^2+] = kc [(Po2) (H^+)^4]^1/4.

Also, 1/ 55850 = 1.79 × 10^-5 M.

[Fe^2+] + [Fe^3+] = 1.79 × 10^-5. -------(1).

Therefore, [Fe^3+]/[Fe^2+] = kc [(Po2) (H^+)^4]^1/4. = [Fe^3+]/[Fe^2+] = [ 1.19 × 10^31 × 0.2095 × (10^2)^2] ^1/4 = 3.97 × 10^5.

Therefore, [Fe^3+]/[Fe^2+] = 3.97 × 10^5.

[Fe^3+] = 3.97 × 10^5[Fe^2+].

Hence, using the equation (1) above we can determine the value of the species.

[Fe^2+] + [Fe^3+] = 1.79 × 10^-5

[Fe^2+] + [Fe^2+] = 1.79 × 10^-5.

[Fe^2+] + 3.97 × 10^5[Fe^2+] = 1.79 × 10^-5.

[Fe^2+] = 4.51 × 10^-11 M.

Therefore, we will have [Fe^3+]/[Fe^2+] = 3.97 × 10^5.

Thus, [Fe^3+] = [Fe^2+] × 3.97 × 10^5. = 1.79 × 10^5 M.

Answer:

I'm sorry to say but there is no statements in this question meaning no one will be able to answer them with out them.. what are the statements?

Explanation:

The question is incomplete, the complete question is;

A 8.00 L tank at 2.64 °C is filled with 9.82 g of chlorine pentafluoride gas and 10.1 g of dinitrogen difluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction and partial pressure of each gas, and the total pressure in the tank. Be sure your answers have the correct number of significant digits.

Answer:

See explanation for details

Explanation:

Number of moles of N2F2 = mass/ molar mass

Molar mass of N2F2 = 66 g/mol

Number of moles = 10.1 g/66 = 0.15 moles

Number of moles of ClF5 = 9.82 g/130 g/mol= 0.08 moles

Molar mass of ClF5= 130g/mol

Total number of moles = 0.15 moles + 0.08 moles = 0.23 moles

Given that;

T= 2.64 °C + 273 = 275.64 K

n= 0.23 moles

R= 0.082 Latmmol-1K-1

V= 8.00 L

P= ??

From;

PV =nRT

P= nRT/V

P= 0.23 ×0.082 × 275.64/8.00

P= 0.65 atm

Mole fraction of N2F2= 0.15/0.23 = 0.65

Partial pressure = mole fraction × total pressure = 0.65 × 0.65 = 0.42 atm

Mole fraction of ClF5 = 0.08/0.23 = 0.35

Partial pressure of ClF5 = mole fraction × total pressure = 0.35 × 0.65 = 0.22 atm

Answer:

H. 2 blue, 3 yellow, and 12 green

Explanation:

Aluminium atoms (Al) = Blue Beads

Oxygen Atoms (O) = Green Beads

Sulfur (S) = Yellow beads

From the compound Al2(SO4)3, the number of atoms present are;

Al = 2

S = 3

O = 12

This means the model would contain;

2 Blue beads

12 Green beads

3 Yellow beads

The correct option is; H. 2 blue, 3 yellow, and 12 green

Answer:

H

Explanation:

Al(blue):2

S(yellow):3

O(green):4*3=12

so 2 blue beads 3 yellow beads and 12 green beads don't time the 2*3 it's not the same compound

good luck!!!

Answer:

Kinetic Energy is the correct Answer.

Explanation:

At the highest point on the roller coaster (assuming it has no velocity), the object has a maximum quantity of gravitational potential energy. As the object begins moving down to the bottom, its gravitational potential energy begins to decrease and the Kinetic Energy starts to increase.

Answer:

its b  

B. 4

Explanation:

Answer:

The solvent

Explanation:

After the solid is recoverd by decanting the liquid, some solvent particles may still adhere to the solid.

In order to remove the solvent that may have adhered to the solid completely , the solid is washed before it is now dried.

In order to remove the remaining liquid present the solid material.

We are washing the solid in order to remove the liquid particles that is attached to the solid material with the help of water. Water is a universal solvent that dissolve large number of solutes in it.

Water removes the liquid from the solid by attaching with that liquid or dissolving in it so that's why we use water for washing a solid in order to remove the impurities from the solid material in which it is placed.

Learn more: https://brainly.com/question/18520645

Answer:

PH = 4.0

Explanation:

We are given;

Ka1 = 8.9 × 10^(-8)

Ka2 = 1.0 × 10^(-19)

From the 2 values of K given above, we can see that Ka2 is far smaller than Ka1.

Thus, Positive hydrogen ion (H+) will be majorly formed from first dissociation which is Ka1.

Now, the breakdown of the H2S solution is;

H2S⇌[H+] + [HS−]

Thus;

Ka1 = [[H+] × [HS2^(-)]]/(H2S)

HS2^(-) also has a positive hydrogen ion.

Thus, we can rewrite as;

Ka1 = [[H+] × [H+]]/(H2S)

Ka1 = (H+)²/(H2S)

Concentration of H2S is given as 0.1M. Thus;

8.9 × 10^(-8) = (H+)²/0.1

(H+)² = 0.1 × 8.9 × 10^(-8)

(H+) = √(0.1 × 8.9 × 10^(-8))

(H+) = 0.00009433981

Now, PH is gotten from;

PH = -log (H+)

Thus;

PH = -log 0.00009433981

PH ≈ 4.0

Answer:

[tex]1.2x10^{38}\frac{fg}{cm^3}[/tex]

Explanation:

Hello there!

In this case, for such unit conversion we need to realize that 1 kg is equal to 1000 g, 1 g is equal to 1x10⁹ and 1 mL equals 1 cm³, therefore we apply:

[tex]12x10^{25}kg*\frac{1000g}{1kg} *\frac{1x10^9fg}{1g} *\frac{1mL}{1cm^3} \\\\1.2x10^{38}\frac{fg}{cm^3}[/tex]

Best regards!

Answer:

2 should be potential energy and 3 should be A

Explanation:

Answer:

the answer is simple

Explanation:

jnnn B upper up of the eye color

Answer:

1. BBEE

2. BbEe

3. BBee

4. BbEE

5. bbEE

6. bbEe

7. Bbee

8.bbee

Answer:

1. 14 moles of NH3 were produced.

2. 7 moles of CO2 were produced.

3. 7 moles of H2O were produced.

Explanation:

We'll begin by writing a balanced equation for the decomposition of ammonium carbonate, (NH4)2CO3.

This is illustrated below:

(NH4)2CO3(s) —> NH3(g) + CO2(g) + H2O(g)

There are 2 atoms of N on the left side and 1 atom on the right side. It can be balance by putting 2 in front of NH3 as shown below:

(NH4)2CO3(s) —> 2NH3(g) + CO2(g) + H2O(g)

Now the equation is balanced.

From the balanced equation above,

1 mole of (NH4)2CO3 decompose to produce 2 moles of NH3, 1 mole of CO2 and 1 mole of H2O.

1. Determination of the number of mole of NH3 produced.

From the balanced equation above,

1 mole of (NH4)2CO3 decompose to produce 2 moles of NH3.

Therefore, 7 moles of (NH4)2CO3 will decompose to produce = 7 × 2 = 14 moles of NH3.

Therefore, 14 moles of NH3 were produced.

2. Determination of the number of mole CO2 produced.

From the balanced equation above,

1 mole of (NH4)2CO3 decompose to produce 1 mole of CO2.

Therefore, 7 moles of (NH4)2CO3 will also decompose to produce 7 moles of CO2.

Therefore, 7 moles of CO2 were produced.

3. Determination of the number of mole of H2O produced.

From the balanced equation above,

1 mole of (NH4)2CO3 decompose to produce 1 mole of H2O.

Therefore, 7 moles of (NH4)2CO3 will also decompose to produce 7 moles of H2O.

Therefore, 7 moles of H2O were produced.

Answer:

polar bonds are caused by different kind of atoms, because almost every atoms have different powers to attract electrons.

the answer will be the two same atoms, F2

Answer:

As the atomic number of elements increases, the melting point increases because there are more electrons around the nucleus, which creates a stronger negatively-charged force. With stronger forces, the melting point rises. 3. Non-metals usually have low melting points.

Explanation:

The melting point rises as the atomic number of elements increases because there are more electrons surrounding the nucleus, creating a stronger negatively charged force. The melting point rises as the forces become stronger.

To learn more about nucleus, refer to:

https://brainly.com/question/14110259

#SPJ2

Answer:

5

Explanation:

The image attached shows the different monochlorination products obtained when chlorine gas is heated with methylcyclobutane.

We must keep in mind that the reaction occurs by free radical mechanism as shown in the image attached. The proportion in which the products are formed depends on the stability of the free radical intermediate leading to that particular product.

Image credit: askiitians

Answer:

5Ns

momentum= mass *velocity

=1*5

=5Ns

Answer:

0.0611M of HNO3

Explanation:

The concentration of the NaOH solution must be 0.1198M

The reaction of NaOH with HNO3 is:

NaOH + HNO3 → NaNO3 + H2O

1 mole of NaOH reacts per mole of HNO3.

That means the moles of NaOH used in the titration are equal to moles of HNO3.

Moles HNO3:

12.75mL = 0.01275L * (0.1198mol / L) = 0.0015274 moles NaOH = Moles HNO3.

In 25.00mL = 0.025L -The volume of the aliquot-:

0.00153 moles HNO3 / 0.025L =

Answer:

K = 0.0505

Explanation:

Based on the equilibrium:

N2O3 ⇄ NO2 + NO

K, equilibrium constant, is defined as:

K = [NO2] [NO] / [N2O3]

Where [] are the equilibrium concentration of each species in the mixture.

The initial molarity of N2O3 is:

1.191mol / 2.00L = 0.5955M

In equilibrium, 0.5955M of N2O3 reacts producing X Molar of NO2 and X Molar of NO:

[N2O3] = 0.5955M - X

[NO2] = X

[NO] = X

As equilibrium concentration of NO2 is 0.300mol/2.00L = 0.15M; X = 0.15M:

[N2O3] = 0.5955M - 0.15M = 0.4455M

[NO2] = 0.15M

[NO] = 0.15M

And K is:

K = [0.15M] [0.15M] / [0.4455M]

Explanation:

It represent Alcohol group (—OH)