Machine learning (ml) and artificial intelligence are the fields where the problem of having too many skilled, business-savvy programmers is least likely to occur (ai).
Machine learning (ML), a subtype of artificial intelligence, is the method by which computers learn to recognize patterns or the capacity to continuously learn from and make predictions based on data, then make adjustments without being specifically programmed to do so. The way that machine learning works is quite complex and depends on the task at hand as well as the algorithm used to do it. But at its core, a machine learning model is a computer that scans data for patterns before applying what it learns to perform the task that has been handed to it more effectively. Even the more challenging tasks can be automated by machine learning if they depend on a set of data or rules.
Learn more about Machine learning (ML) here:
https://brainly.com/question/28144983
#SPJ4
In C, Given positive integer numInsects, write a while loop that prints that number doubled repeatedly without exceeding 100. Follow each number with a space. After the loop, print a newline.Example: If numInsects = 8, your code should print:8 16 32 64
We first declare and initialize the variables numInsects and currentNum to the starting value of numInsects.
What is the program for while loop c code?We then enter a while loop that continues as long as currentNum is less than or equal to 100.Inside the loop, we use printf to print the current value of currentNum followed by a space.We then double the value of currentNum by multiplying it by 2.The loop continues until currentNum exceeds 100, at which point the loop exits.Lastly, we use printf to print a newline to end the output.In this example, the code will print: 8 16 32 64 (as the value of currentNum is doubled repeatedly without exceeding 100)int numInsects = 8;while (numInsects <= 100) { printf("%d ", numInsects); numInsects *= 2;}printf("\n");To learn more about while loop refer:
brainly.com/question/30357299
#SPJ4
The while loop is used to loop through a block of code until a condition is met.
What is the program using while loop?In most computer programming languages, a while loop is a type of control flow statement that allows code to be executed repeatedly based on a given Boolean condition. While loops are similar to looping if statements.The while statement initiates a loop in which the specified statement is executed until the test condition is false. The condition is evaluated after the statement is executed, resulting in at least one execution of the specified statement.The program that prints number doubled repeatedly till 100 using while loop is as follows :
num_insects = 8
while num_insects <= 100:
print(num_insects,'', end="")
num_insects = num_insects * 2
print("") # newline
To learn more while loop refer to :
brainly.com/question/19344465
#SPJ4
first, place each link in the chain of infection with its example. second, correctly order the examples, with the first stage at the top.
First, place each link in the chain of infection with its example in the following order, with the first stage at the top:
SourceMode of TransmissionPortal of ExitPortal of EntrySusceptible HostSecond, correctly order the examples, with the first stage at the top:
Source: Person with the disease.Mode of Transmission: Physical contact with an infected person.Portal of Exit: Lungs, saliva, or other bodily fluids.Portal of Entry: Inhaling droplets or touching a contaminated surface.Susceptible Host: Person who has not been exposed to the pathogen.Learn more about the chain of infection:
https://brainly.com/question/3121356
#SPJ4
Which of the following methods may be used to install new wheel studs?
answer choices
A. Draw in or pull in
B. Draw out or slide in
C. Draw out or push in
D. Draw in or press in
D. Draw in or press in. This method is used to install new wheel studs because it is the most secure and reliable way to install them. The stud is inserted into the wheel hub and then pressed in with a press or hammer.
There are several methods that may be used to install new wheel studs. The most common method is to draw in or press in the stud. This involves inserting the stud into the wheel hub and then pressing it in with a press or hammer. This ensures that the stud is securely in place and will not come loose or move. Another method is to draw out or slide in the stud. This involves inserting the stud into the wheel hub and then sliding it in until it is flush with the hub. This method is less secure than the press-in method, but it is still effective. Finally, the draw out or push in method involves inserting the stud into the wheel hub and then pushing it in until it is flush with the hub. This method is the least secure of the three, but it is still effective.
Learn more about wheel studs here
https://brainly.com/question/7650277
#SPJ4
The output of a power supply is assumed to be normally distributed. 16 observations taken at random on voltage are as follows: 10. 35, 9. 30, 10. 00, 9. 96, 11. 65, 12. 00, 11. 25, 9. 58, 11. 54, 9. 95, 10. 28, 8. 37, 10. 44, 9. 25, 9. 38 and 10. 85. (a) Test the hypothesis that the mean voltage equals 12V against a two-sided alternative using α=0. 5. (b)Construct a 95% confidence interval on µ. (c) Test the hypothesis that σ2 =1 using α=0. 5. (d)Construct a 95% two-sided confidence interval on σ. (e) Construct a 95% upper confidences interval on σ
As the typical value can be represented by the mean, it acts as a benchmark for all observations.
Explain about the Mean?A dataset's mean (also known as the arithmetic mean, which differs from the geometric mean) is calculated by dividing the sum of all values by the total number of values. It is frequently referred to as the average and is the most widely used measure of central tendency.
The mean is the average or most frequent value among a set of numbers. It is a statistical measure used to determine the median and mode of a probability distribution's central tendency. It is additionally known as an expected value.
Finding the "average" value involves adding up all the data points and dividing by the total number of data points.
Use the R codes listed below to replicate the answers:
d = c(10.35, 9.30, 10.00, 9.96, 11.65, 12.00, 11.25, 9.58, 11.54,
9.95, 10.28, 8.37, 10.44, 9.25, 9.38, 10.85)
mean(d)
sd(d)
se = sqrt(length(d)) / sd(d)
se
Mean(d) - 1.96* se = CIl
mean(d) + 1.96* se CIU
CI = c (CIl, CIU)
To learn more about Mean refer to:
https://brainly.com/question/1136789
#SPJ4
Water flows at a rate of 0. 040 m3/s in a 0. 12-m-diameter pipe that contains a sudden contraction to a 0. 06-m-diameter pipe. Determine the pressure drop across the contraction section. How much of this pressure difference is due to losses and how much is due to kinetic energy changes?
Pressure drop in contraction section = 133 kPa. The pressure difference due to friction losses is = 39.7 kPa. Pressure difference due to kinetic energy changes = 93 kPa.
Find the pressure drop across the contraction section?
P is the pressure drop per 100 feet of pipe and the formula is P = 0.0668 V. D2.D is the inside diameter of the pipe measured in inches. Viscosity is expressed in centipoise (not SSU).
The Le/D approach simply increases the multiplier in equation (1) (i..L/D) with the length of the straight pipe (i..Le), which would cause a pressure drop equal to the connection losses, hence the term "equivalent length".
So ( L + Le ) /D is a multiplier.
The fluid flowing through the contraction (reduction in pipe diameter) causes an increase in velocity, resulting in a greater pressure drop than an equivalent straight pipe.
Pressure drop during contraction = 133 kPa.
Pressure difference due to friction losses = 39.7 kPa.
Pressure difference due to kinetic energy changes = 93 kPa.
For more information on pressure drop, see
brainly.com/question/14911964
#SPJ4
your company is confused and needs your technical assistance. they have given you different scenarios and want to know if they should use a spreadsheet or a dbms. analyze each situation and select either dbms or a spreadsheet.
Statistical Comparisons Select Worksheet 2. Complex DBMS Queries 3. Summary Report Select 4. Calculations Select v 5. Mortgage Calculations Select 6.
What is a DBMS?
Data management Select V 7. DBMS inventory control 8. Data security control Select 9. Small DBMS data storage V 10. Class selection Grade calculation. A database management system (or DBMS) it is essentially nothing more than a computerized data storage system. System users have the ability to perform various types of operations on this system to manipulate database data or manage the structure of the database by yourself. Database management systems (DBMS) are classified according to their data structures or types. There are several types of databases that can be used on a mainframe to take advantage of z/OS®: inverted list, hierarchical, network or relational. Mainframe sites typically use a hierarchical model, if a data structure ( not the data values ) the data required by the application is relatively static.
For example, a BOM database structure always contains a top-level assembly part number and multiple levels of components with subcomponents. The structure typically includes component forecasts, cost and price data, etc.
To learn more about DBMS refer to:
brainly.com/question/24027204
#SPJ4
How to report interest income from the Internal Revenue Service?
Requires that most interest payments be reported on a 1099-INT tax form by the individual or entity making the payment. Most often this is a bank, other financial institution, or government agency.
What does payment mean?
One of the most popular forms of payment is cash (bills and change). ). .
Purchase will be made to buyer's account in the form of a personal check (US check). Debit Card: When a debit card is used to make a purchase, the buyer's account is charged immediately. Comparable to debit cards are credit cards. Payment occurs when agreed-upon amounts of products and services are exchanged for cash, goods, or services that are acceptable to all parties. Exchange of services, cash, cheques, wire transfers, credit and debit cards are all acceptable methods of payment.
Total pay applies to hourly, weekly, or daily pay plans used in place of overtime pay.
To learn more about payments, visit
brainly.com/question/26974810
#SPJ4
4.1 an a a battery, whose thevenin equivalent is a voltage source of 1.5 v and a resistance of 2 n, is connected to the terminals of an ideal diode. describe two possible situations that result. what are the diode current and tcnninal voltage when (a) the connection is between the diode cathode and the positive terminal of the battery and (b) the anode and the positive terminal are connected?
The cathode is the diode's negative terminal, or n-side. When the Current is 0.75A, then Voltage will be 1.5 V .
What is the current that passes through the diode?
As a result, the n-side of the diode is connected to the positive terminal of the battery in this case. This is the reverse bias condition, when no current flows through the diode and the diode acts as an open circuit. In this case:
Id = 0 A = current through diode
Vd = 1.5 V = Voltage Across Diode
B. The anode is the diode's positive terminal, or p-side. As a result, the p-side of the diode is connected to the positive terminal of the battery in this case. When current flows through the diode and the diode acts as a closed circuit, this is the condition for forward bias. In this case, the ideal diode acts as a short circuit and has the following properties:
The current that passes through the diode:
Id = V/R
= 1.5 V/2 Ω = 0.75A
To learn more about current refer to :
brainly.com/question/1100341
#SPJ4
the 2.8-kip load p is supported by two wooden members of uniform cross section that are joined by the simple glued scarf splice shown. determine the normal and shearing stresses in the glued splice.
The normal stress in the glued splice is 0.04 Ksi and the shearing stress is 0.07 Ksi.
The kip load p is supported by two wooden members of uniform cross section that are joined by the simple glued scarf splice. Normal stress and shearing stress are computed as follows:
sin60=5/x
x=5/sin60
A= 3 * x
= 3*5/sin60
=15/sin60
Normal stress will be computed as :
σ =P/A=1.4sin60/A
A= 15/sin60
σ=0.04 Ksi
Shearing stress will be computed as:
τ = Pcos60/A
A= 15/sin60
τ=0.04 Ksi
For further information regarding shear stress, click the link below:
brainly.com/question/12910262
#SPJ4
what is the difference between a refrigerator and an air conditioner?
Refrigeration keeps cold air close, whereas air conditioning pushes it away and refrigeration uses only coolant, whereas air conditioning also uses outside air.
What is the use of refrigerator?The transfer of thermal energy from a cold temperature to a higher temperature occurs in refrigeration. Thermal energy is removed from the air in AC to keep it cool.The primary purpose of a refrigerator is to keep food cold. Cold temperatures keep food fresher for longer. The basic idea behind refrigeration is to slow down the activity of bacteria (which is present in all food) so that the bacteria take longer to spoil the food.Refrigerators and freezers can stand alone or be built into a kitchen. The refrigerator enables modern households to keep food fresher for longer periods of time than previously possible.To learn more about refrigerator refer to :
https://brainly.com/question/11014767
#SPJ4
co2 (assume ideal gas) enters a steady flow device at a pressure of 1000 kpa, a temperature of 1000k, and negligible velocity. the gas expands adiabatically and leaves the steady flow device with a velocity of 125 m/s, a temperature of 700k, and a pressure of 100kpa. the cross sectional are at the exit is 0.1m2. find: (a) mass flow rate through the device, (b) power (watts) developed by this device
This device is an adiabatic steady flow device, which means that it does not exchange energy with the environment.
Find mass flow rate through the device?(a) Mass Flow RateMass Flow Rate = ρV A
ρ = gas density
V = velocity
A = area
Using the ideal gas law, we can calculate the gas density:
ρ = (P * M) / (R * T)
P = pressure (1000 kPa)
M = molar mass of the gas (44 g/mol)
R = ideal gas constant (8.314 J/mol K)
T = temperature (1000 K)
ρ = (1000 * 44) / (8.314 * 1000)
ρ = 5.34 kg/m3
Mass Flow Rate = (5.34 kg/m3)(125 m/s)(0.1 m2)
Mass Flow Rate = 6.675 kg/s
(b) PowerPower = Work/Time
Work = Force x Distance
Force = Pressure x Area
Distance = Velocity x Time
Pressure = (100 kPa)
Area = (0.1 m2)
Velocity = (125 m/s)
Time = (1 s)
Force = (100 * 0.1)
To learn more about Mass Flow Rate refer to:
https://brainly.com/question/24356835
#SPJ4
This is an adiabatic steady flow device, which implies it does not exchange energy with its surroundings.
How Determine the mass flow rate via the device?
(A)Rate of Mass Flow
V A = Mass Flow Rate
= density of gas
V stands for velocity.
A = area
We may determine the gas density using the ideal gas law:
Ρ = (P * M) / (R * T)
P stands for pressure (1000 kPa)
M = gas molar mass (44 g/mol)
R denotes the ideal gas constant (8.314 J/mol K).
T is for temperature (1000 K)
Ρ = (1000 * 44) / (8.314 * 1000)
Ρ = 5.34 kg/m3
(5.34 kg/m3)(125 m/s) Mass Flow Rate (0.1 m2)
6.675 kg/s is the mass flow rate.
(b)Strength
Work + Time = Power
Work Equals Force multiplied by Distance
Pressure x Area Equals Force
Distance Equals Speed x Time
Tensile strength = (100 kPa)
Area = (0.1 m2) (0.1 m2)
125 m/s = velocity
Time = (1 s) (1 s)
To learn more about exchange energy to refer:
https://brainly.com/question/17075670
#SPJ4
FILL IN THE BLANK. Traditional file systems use ________, files, and documents.
Traditional file systems use directories, files, and documents. Directories are used to organize files and documents into a hierarchical structure.
Files are the actual data stored in the file system, and documents are the files that contain text or other information. Directories are used to organize files and documents into a hierarchical structure, which makes it easier to find and access the data stored in the file system. Files are the actual data stored in the file system, and documents are the files that contain text or other information. Documents can be used to store text, images, audio, video, and other types of data. Directories are organized into a hierarchical structure, with each directory containing one or more subdirectories. Each subdirectory can contain files and documents, and each file and document can contain data. The hierarchical structure of the file system makes it easier to find and access the data stored in the file system.
Learn more about Traditional files here
https://brainly.com/question/20292126
#SPJ4
A brass rod 100 mm long and 5 mm in diameter extends horizontally from a casting at 200oC. The rod is in air with T?=20oC and h=30 W/(m2 K).
a. What is the temperature of the rod at 25, 50, 75, and 100 mm from the casting? Assume that the fin tip is approximately adiabatic.
b. What is the rate of heat transfer from the fin?
c. What would be the rate of heat transfer from a 5 mm diameter circle of the casting surface
without a fin?
The temperature distribution is the result of the linear heat flow equation [1]: (1) T t = 2 T x 2, where T=T(x,t) is the temperature at a point in space -time(x ,t) and is the thermal diffusivity Answer: 156°C, 128°C and 106.5°C
What is the temperature distribution?
Where L is the length (100mm = 0.
1 m), x is the distance from the rod end, k is the conductivity of the brass, i.e. 133 W/m.
m = (hp/kAc) 1/2
circumference, p = π*D, where D is the diameter (5 mm = 0.
005m) to Pole, Ac = π*D2/4
m = (hp/kAc) 1/2
m = 13.43 m (-1)
m = 13.
43 m⁻1
Nota :
coshmL = cosh(13,43*0,1) =
h/mk = 30/(13.43*133) = 0.0168
Tb is the difference between casting temperature and ambient temperature: Tb = 200 - 20 = 180°C
p Then T ∞
Trod = 106.5 °C
To learn more about the temperature, visit
brainly.com/question/2935496
#SPJ4
Which of the following best describes teachers in the later developmental stages of technology integration?
a. Adjusting the fundamental nature of their instruction.
b. Using technology to support traditional instruction.
c. Adapting instruction to technology.
d. Substituting paper-and-pencil activities with technology.
Making decisions about core technology/protocols and circuit capacity during the technical design phase of a network is interconnected.
Network design is the planning and construction of a communications network. Network design begins with the identification of business and technical needs before network installation. Information concealment and hierarchical design are examples of time-tested principles that apply to good network architecture. Fundamental network protocols that use data encapsulation serve as one example of this. Changes in the lower layers have no impact on the upper layers since they operate in secrecy from the higher layers (i.e. applications). In addition to managing computer systems, they also install and support them. This list could also include intranets, network segments, local area networks (LANs), wide area networks (WANs), and other data transmission technologies.
Learn more about Network design here:
https://brainly.com/question/30052056
#SPJ4
Your manager is interested in looking at the number of engineers in different service lines across the business. Based on the data provided, what is the ratio of construction engineers to civil engineers?
Answer:
The answer is 1 to 2.44
I hope it helps.
every year you have a __% chance of being involved in an automobile accident.
Answer:
3%
Explanation:
the statistic states that 3% of licenced drivers are involved in accidents every year.As a result,the number of active drivers involved in accidents are greater than 3%
0. What percentage of traffic congestion is due to incidents?
The percentage of traffic congestion that is due to incidents will be 20%.
How to calculate the percentage?A percentage simply has to do with the a value or ratio which can be stated as a fraction of 100. It should be noted that when we want to we calculate a percentage of a number, we simply divide it and then multiply the value that is gotten by 100.
In this case, the number of traffic congestion that occured in a month is 20 times and 4 are due to incidents.
The percentage of traffic congestion that is due to incidents will be:
= 4 / 20 × 100
= 20%
Learn more about percentages on
brainly.com/question/24877689
#SPJ1
The number of traffic congestion that occured in a month is 20 times and 4 are due to incidents. What percentage of traffic congestion is due to incidents?
A motor car reaches a velocity of 17 m/s from rest. Draw a velocity-time graph and determine the acceleration.
The automobile initially accelerates for 5 seconds. As a result, the velocity-time graph initially slopes and then maintains a constant speed.
What is velocity of time ?Your understanding of velocity and its scientific definition are probably similar. You are aware that a big displacement over a short period of time corresponds to a large velocity, and that velocity is measured in terms of the speed of objects in terms of miles an hour or kilometres per hour. The shift in position multiplied by the distance travelled is how average velocity is calculated. Velocity and speed describe how quickly or slowly a moving object moves. We frequently encounter circumstances when we must determine which of two or more moving objects is going faster. If the two are travelling on the same route in the same direction, it is simple to determine which is quicker.
To know more about velocity of time visit:
https://brainly.com/question/18358954
#SPJ1
Resolve the force F1 into components acting along the u and v axis and determine the magnitude of the components.
The magnitude of the components of F1 is:
F1v= 129 N F1u= 183 NTo solve this exercise we need to draw the vector components for F1 and in this way we can express the F1 vector in function of its components:
F1= F1v + F1u
Now using the Sine law we can find the F1v and F1u values:
The sine lawThe sine law states that the ratio of the length of any side of a triangle to the sine of its opposite angle is equal for all sides and angles of the triangle.
In other words, for any triangle ABC, the ratio of side a to the sine of angle A is equal to the ratio of side b to the sine of angle B, and the ratio of side c to the sine of angle C. This law is an important tool in trigonometric calculations and is used to calculate the unknown sides and angles of a triangle when given the known sides and angles.
F1v/sin(30°) = 250/Sin(105°)
F1v= 129 N
F1u/Sin(45°) = 250/Sin(105°)
F1u= 183 N
Learn more about Sine law:
https://brainly.com/question/4372174
#SPJ4
because the practice of the basic movements of kata is the focus and mastery of self is the essence of matsubayashi ryu karate do i shall try to elucidate the movements of the kata according to my interpretation based on forty years of study it is not an easy task to explain each movement and its significance and some must remain unexplained to give a complete explanation one would have to be qualified and inspired to such an extent that he could reach the state of enlightened mind capable of recognijing soundless sound and shapeless shape i do not deem myself the final authority but my experience with kata has left no doubt that the following is the proper application and interpretation i offer my theories in the hope that the essence of okinawan karate will remain intact
Political movements and populist political figures include: The French Yellow Vest movement. The Italian Five-Star Movement.
A set of political ideologies known as populism emphasize the idea of "the people" and typically pits that group against "the elite." Anti-establishment and anti-political views are frequently associated with it. Recall that: The populist Yellow Vest movement in France, which started in 2018, was sparked by rising fuel prices and the government's apparent disregard for working-class concerns. The Five Star Organization is an Italian populist movement that was founded in 2009 and combines elements of right- and left-wing ideology. Matteo Salvini, the leader of Italy's right-wing Lega party, is known for pushing a populist agenda that prioritizes immigration restriction and the protection of Italian sovereignty.
Learn more about Populism here:
https://brainly.com/question/30182151
#SPJ4
Nth root
Assign outValues with the nth root of the inValues. The root is specified by rootValue.
rootValue √ inValue Ex: If inValues is [4, 9, 16, 25] and rootValue is 2, then outValues = [2, 3, 4, 5]
This question uses a loop to iterate through an array and the Math.pow() method to calculate the nth root of a number.
The rfequired details for nth root of a number in given paragraph
Let outValues = [];
for (let i = 0; i < inValues.length; i++) {
out Values. push(Math.pow(inValues[i], 1/rootValue)); }
How do you find the nth root of a number?
The steps for this process are as follows:
1. Declare a variable called outValues and set it equal to an empty array.
2. Use a for loop to loop through the elements in the inValues array.
3. Inside the loop, use the Math.pow() method to calculate the nth root of the element in inValues.
4. Push the result of the Math.pow() method to outValues.
5. After the loop, outValues should now contain the nth root of each element in inValues.
To learn more about nth root of a number refer :
https://brainly.com/question/30375320
#SPJ4
what makes social engineering such an effective technique for hackers?
Social engineering is an effective technique for hackers because it exploits human interaction and psychology to gain access to sensitive information and systems.
What are the key components of a successful social engineering attack? The key components of a successful social engineering attack include psychological manipulation, research, and execution. Psychological manipulation involves using tactics such as authority, fear, flattery, or urgency to influence the target’s decision-making. Research involves gathering information about the target, such as their job title, interests, and habits. This enables the attacker to tailor their approach to the target and to create a sense of familiarity or trust. Finally, execution requires carrying out the attack with a well-crafted message, often via email or phone. The message should be tailored to the target, and should be clear, concise, and persuasive. Additionally, the attacker should be confident, friendly, and persistent. With these components, a successful social engineering attack can be carried out.To learn more about social engineering refer to:
https://brainly.com/question/30203031
#SPJ4
He proposed grading at a project site will consist of 25,100 m3 of cut and 23,300 m3 of fill and will be a balanced earthwork job. The cut area has an average moisture content of 8. 3%. The fill will be compacted to an average relative compaction of 93% based on a maximum dry unit weight of 18. 3 kN/m3 and an optimum moisture content of 12. 9% obtained from the modified Proctor test. Compute the volume of water in kiloliters that will be required to bring these soils to the optimum moisture content
The volume of water in kiloliters that will be required to bring these soils to the optimum moisture content is 1859 kL .
What is the volume of water ?Knowing that;
Cut volume: 25,100 m3
23,300 m3 of dry dirt were filled.
The soil's weight will be;
⇒ 93% × 18.3 kN/m³ × 23,300 m³
= 0.93 × 426390 kN 3
= 396,542.7 kN
12.9% is the ideal moisture percentage.
Moisture needed is equal to (12.9 - 8.3%%)% = 4.6%
So,
Water needed weight = 4.6% x 396,542.7 = 18241 kN
Water needed is equal to 18241 / 9.81, or 1859 m3.
1859 kL of water are needed.
Consequently, 1859 kL of water will be needed to bring these soils to the ideal moisture level.
In order to get these soils to the ideal moisture level, 1859 kL of water will be needed.
To learn more about volume refer to:
https://brainly.com/question/22212556
#SPJ4
when the environment becomes more turbulent and unpredictable: [see p.15] group of answer choices strategy becomes less important than intuition strategy becomes an increasingly important as a source of direction external consultants need to play a greater role in strategy making strategy becomes an impossible exercise
Strategy becomes an increasingly important source of direction as the environment becomes more turbulent and unpredictable.
What is the primary source of strategy?The goal of strategy is to provide long-term direction and scope for an organization that achieves advantage in a changing environment through its configuration of resources and competencies with the goal of meeting stakeholder expectations.The degree to which a firm's external environment is unpredictable, uncertain, and volatile is referred to as environmental turbulence. It is defined more formally as the rate and unpredictability of changes in a firm's external environment.The degree to which an organization's resources and capabilities match the opportunities in the external environment is referred to as strategic fit. Because the matching occurs through strategy, it is critical that the company has the actual resources and capabilities to execute and support the strategy.To learn more about strategy refer to :
https://brainly.com/question/24462624
#SPJ4
determine the torque applied to the shaft of a car that transmits 225 hp and rotates at a rate of 3000 rpm.
Point E has a total internal loading of -3 kN. At point F, there is a +3 kN internal loading overall.
In mathematics and physics, a cross-sectional area is the non-empty intersection of a solid body in three dimensions with a plane, or its equivalent in higher dimensions. An item can be divided into several parallel cross-sections when it is chopped into pieces. The boundary of a three-dimensional cross-section that is parallel to the plane created by these axes and equal to two of the directions is also referred to as a contour line. Point E has a total internal loading of -3 kN. At point F, there is a +3 kN internal loading overall. The internal loadings acting on the cross section at E are mathematically given as, according to what we have. M e=-2400lbft. Typically, the mathematical equation for the equilibrium moment about b is written as
Learn more about Internal loading here:
https://brainly.com/question/30216823
#SPJ4
the first step in checking the operation of the brake pad wear indicator system is to: group of answer choices check that the sensor or scratcher is not too close to the rotor. research the service information to determine the type of brake pad wear indicator system that is used. check that the sensor is grounded with a test lead. test the system.
The first step in checking the operation of the brake pad wear indicator system is to research the service information to determine the type of brake pad wear indicator system that is used.
Different types of brake pad wear indicator systems use different types of sensors or scratchers, and it is important to know which type of system is being used in order to properly check its operation. Once the type of system is known, the next step is to check that the sensor or scratcher is not too close to the rotor. If the sensor or scratcher is too close to the rotor, it may not be able to detect the wear of the brake pads. Additionally, the sensor or scratcher should be checked to ensure that it is properly grounded with a test lead. Finally, the system should be tested to ensure that it is functioning properly. This can be done by applying the brakes and checking the operation of the indicator light or other warning system. If the system is functioning properly, the indicator light or other warning system should activate when the brake pads are worn.
Learn more about indicator system here
https://brainly.com/question/29654868
#SPJ4
part 1. implementing basic combinational logic gates on the de10-lite board following the example given in part 0, create a new project and implement some logic gates of your choice using the switches, buttons, leds and 7-segment displays on the de10-lite board. download your design and verify proper operation. there are many possible design options. a few examples are 2-, 3- or 4-input and, nand, or, nor gates. you could also use a pushbutton to directly control an led or segment of a 7-segment display. note that the segments of the 7-segment display are active-low, as shown in figure 9, and bit 7 corresponds to the decimal point. for example, in order to turn off all the segments of the hex0 7-segment display and keep them off, you could use the following assign statement:
The truth table is the main tool to capture logical relationships in a concise and universal way.
What is a segment?
A segment is a customer Data Platform (CDP), which means it provides a service that simplifies the collection and use of user data from your digital assets (websites, applications, etc.). Thanks to Segment you can collect, transform, send and store your data. By incorporating new tools, the lets you spend more time consuming data and less time collecting it. You can also enrich the collected customer data by combining data from other tools and then aggregating it to monitor performance, make decisions and create unique, personalized user experiences.
You can also use Profile, the Segment Identity Recognizer, which allows you to unify individual user data for a holistic understanding of their activities.
To learn more about decision making, visit:
brainly.com/question/1249089
#SPJ4
A full brake-by-wire system does away with the hydraulic portion of the brake system and replaces it with all of the following EXCEPT: Sensors, wires, and electronic control unit, or mechanically actuated motors
The correct answer is C) mechanically actuated motors. A full brake-by-wire system replaces the hydraulic portion of the brake system with sensors, wires, and an electronic control unit, but not mechanically actuated motors.
Instead, the brake system is actuated through electrical means, such as electric motors, digital computers, or fiber optic cables.
Mechanically actuated motors are motors that use mechanical force, such as a spring, to drive the motor. These motors are used in a variety of applications, from toys to industrial machinery, and can be found in a wide range of sizes and shapes. Mechanically actuated motors have several advantages over other types of motors, such as low cost, low maintenance, and the ability to produce high torque at low speeds.
Learn more about electrical :
https://brainly.com/question/24786034
#SPJ4
The vertical force F acts downward at A on the twomembered frame. Determine the magnitudes of the two components of F directed along the axes of AB and AC. Set F = 500 N. Solve problem 4 with F = 350 lb.
Vector addition parallelogram law :If a force F needs to be broken down into its component parts along the axes b and c, one should start at the head of the force and build lines parallel to the axes until a parallelogram is formed.
Solve the problem ?Vector addition parallelogram law :If a force F needs to be broken down into its component parts along the axes b and c, one should start at the head of the force and build lines parallel to the axes until a parallelogram is formed.
The parallelogram's sides are represented by Fb and Fc.
Finding the force component F AB and F AC applied at diagram point A is our task.
We can employ the law of sines, as shown in the diagram.
The query is unfinished.
The entire question is included as an image in the attachment, and an explanation is given below.
F AB / sin 60 = 500/ sin 75
F AB = 500/0.965*0.866
F AB = 448.7 N
To find F AC
F AC /sin 45 =500 /sin 75
F AC = 500/0.965* 0.7071
F AC = 366.3 N
To learn more about Vector addition parallelogram law refer
https://brainly.com/question/14436845
#SPJ4
SCI material can be processed on SIPRNET if the content is Secret/SCI.
True or False
SCI content that is secret may be processed over Siprnet. This assertion is untrue.
What is a sensitive compartmented information SCI program quizlet?An application that separates multiple categories of classified information into unique compartments for increased security and distribution or distribution control.The material must be kept in a pouch or briefcase with a lock that can be opened with a key that is made of canvas or another sturdy material. Decisions on derivative classification must be based on specific information.The aim of this yearly SIPRNET refresher training is to make sure that all MEDCOM SIPRNET users are aware of their duties for the security of sensitive information and systems in line with applicable Army rules and MEDCOM policy on SIPRNET Security Procedures. Standards for eligibility to access SCI are set by the DNI.To learn more about SCI refer to:
https://brainly.com/question/28416408
#SPJ4