what is the volume of an object that has a density of 65g/cm3 and a mass of 130g.

Answers

Answer 1

Density ρ is mass m per unit volume v, or

ρ = m / v

Solving for v gives

v = m / ρ

So the given object has a volume of

v = (130 g) / (65 g/cm³) = 2 cm³


Related Questions

An electron moving in the direction of the x-axis enters a magnetic field. If the electron experiences a magnetic deflection in the -y direction, the direction of the magnetic field in this region points in the direction of the

Answers

Answer:

-z

Explanation:

The force on a moving charge due to a magnetic field follows the right hand rule, so a positive charge, experiencing a magnetic deflection in the -y direction, while it moves in the direction of the x-axis, will do it  due to a magnetic field pointing in the +z direction.

As the electron has a negative charge, the magnetic field will point in the opposite direction, i.e., in the -z direction.

A recipe gives the instructions below
After browning the meat pour off fat from the pan to further reduce fat use a strainer.

what type lf separation methods are described in the recipe

A decantation and screening
B distillation and screening
C decantation and centrifugation
D distillation and filtration

Answers

Answer:

A. decantation and screening

Explanation:

Decantation is the one of the process of separating the mixture. In this process the precipitated liquid is separated from the solid. According to the given instruction for the recipe, the fat which is in liquid state is separated from meat. In the process of screening, more liquid is separated by placing the mixture on the screen. Here, the gravity plays an important role for the process of separation.  

Answer:

a

Explanation:

if a ramp is 12 meters long has a mechanical advantage of 6 whats its height brainly HELPP!

Answers

Answer:

h = 2 m

Explanation:

Mechanical advantage of a ramp is given by :

MA = length of incline/height of incline

Length of the ramp, l = 12 m

MA = 6

We need to find the height of the ramp.

So,

height of ramp = length of incline/MA

h = 12/6

h = 2 m

So, the height of the ramp is 2 m.

BRAINLIEST. Agraph is probelow. The graph shows the speed of a car traveling east over a 12 second period. Based on the information in the graph, it can be
that in the first second

Answers

Answer:speeding up constantly

Explanation:

The graph between the time and the speed of the car shows that the speed is increasing constantly, so, option C is correct.

What is speed?

A moving object's rate of change in distance traveled is measured as speed. Speed is a scalar, which implies it is a measurement with a magnitude but no direction.

A thing that moves quickly and with high speed, covering a lot of ground in a short time. On the other hand, a slow-moving object traveling at a low speed covers a comparatively small distance in the same amount of time. An object with zero speed does not move at all.

Given:

The graph shows the speed of a car traveling east over a 12-second period,

As you can see from the graph, at time t = 0 sec the speed is 10 m/s,

At t = 3 sec, the speed = 15.3 m/s

At t = 6 sec, the speed = 20.3 m/s

Thus, speed is increasing constantly.

To know more about Speed:

https://brainly.com/question/13074982

#SPJ2

What is Triangle ill send a picture​

Answers

A triangle is just a shape...
It’s a shape lol
.......

block of mass m sits at rest on a rough inclined ramp that makes an angle with the horizontal. What must be true about normal force F on the block due to the ramp

Answers

Answer:

Explanation:

For a body on a ramp with mass m, the forces acting on the body along the vertical component are the weight and the normal reaction.

The weight of the body acts in the negative y direction while the normal reaction acts in the positive y direction

Taking the sum of forces along the y component

Sum Fy = -W+R = ma

Since acceleration is zero

-W+R = m(0)

-W+R = 0

-W = -R

W = R

Hence the Normal reaction force acting on the on the body is equal to normal force

A chef places an open sack of flour on a kitchen scale. The scale reading of
40 N indicates that the scale is exerting an upward force of 40 N on the sack. The magnitude of this force equals the magnitude of the force of Earth’s gravitational attraction on the sack. The chef then exerts an upward force of
10 N on the bag and the scale reading falls to 30 N.Draw a free-body diagram of the latter situation.

Answers

Answer:

Explanation:

Given

Initial reading on scale =40 N

So, we can conclude that weight of the sack is 40 N

After this a 10 N force is applied upward on the sack such that the net force becomes (40-10) N downward (because downward force is more)

This net downward force is the resultant of earth graviational pull and the applied upward force.

So, this downward force acts on the machine which inturn applies an upaward force of same magnitude called Normal reaction.

This situation can be diagramatically represented by figure given below  

Answer:

40N

Explanation:

trust

A person following a liberal ideology would likely approve of

Answers

i’m
not sure sorry :5

A car at the top of a ramp starts from rest and rolls to the bottom of the ramp, achieving a certain final speed. If you instead wanted the car to achieve twice as much speed at the bottom of the ramp, how high should the ramp be compared to the first case

Answers

Answer:

It must be 4 times high.

Explanation:

Assuming that the car can be treated as a point mass, and that the ramp is frictionless, the total mechanical energy must be conserved.This means, that at any time, the following must be true:ΔK (change in kinetic energy) = ΔU (change in gravitational potential energy)

⇒      [tex]m*g*h = \frac{1}{2} * m*v^{2}[/tex]

Let's call v₁, to the final speed of the car, and h₁ to the height of the ramp.

       So, at the bottom of the ramp, all the gravitational potential energy

      must be equal to the kinetic energy of the car (Defining the bottom of

      the ramp as our zero reference for the gravitational potential energy):

       [tex]m*g*h_{1} = \frac{1}{2} * m*v_{1} ^{2}[/tex]  (1)

Now, let's do v₂ = 2* v₁Replacing in (1) we get:

        [tex]m*g*h_{2} = \frac{1}{2} * m*(2*v_{1}) ^{2}[/tex] (2)

Dividing (2) by (1), and rearranging terms, we get:h₂ = 4* h₁

a box with a Constance velocity has a 5 N of force applied to it from all sides and direction. what will happen to the motion of the box as result?
A-the object will come to rest
b-the velocity of the object will remain the same
c- the velocity of the object will decrease
d- the velocity of the object will increase

Answers

Answer:

  b-the velocity of the object will remain the same

Explanation:

Forces from opposite sides cancel each other, so there is no net force on the box that would affect its motion. The velocity of the box will remain unchanged.

__

(The box may be crushed, but it will continue in the same direction at the same speed.)

Answer:

b the velocity of the object will remain the same

Explanation:

use your brain:)

On a hot day, you sit on the edge of a pool and dip your feet into the water, causing changes to occur that are related to the physical and thermal properties of your feet and of the water. Select the statements that accurately describe what is happening, in terms of the heat and temperature of the objects and substances. There may be more than one accurate statement.

Answers

The true statements are;

Heat from your feet raises the temperature of the water.

Your feet transfer heat into the surrounding water, reducing the temperature of your feet. B and C

What are thermal changes?

The term thermal changes has t do with the changes in the heat properties of the substance. We know that when you put your leg in water there is a thermal exchange between the water and your leg.

Owing to the fact that heat is transferred from your leg to the water, your leg will feel cool while the temperature of the water will increase slightly.

Having said all these, the true statements are;

Heat from your feet raises the temperature of the water.

Your feet transfer heat into the surrounding water, reducing the temperature of your feet.

Learn more about thermal exchange:https://brainly.com/question/7230756

#SPJ1

Missing parts;

On a hot day, you sit on the edge of a pool and dip your feet into the water, causing changes to occur that are

related to the physical and thermal properties of your feet and of the water. Select the statements that

accurately describe what is happening, in terms of the heat and temperature of the objects and substances.

There may be more than one accurate statement.

A. Cold from the water reduces the temperature of your feet.

B. Heat from your feet raises the temperature of the water.

C. Your feet transfer heat into the surrounding water, reducing the temperature of your feet.

D. Cold from the water moves into your warm feet.

Help me please :)
Answer the following questions to explain the relationship between electricity and magnetism.

• What are the critical components of an electromagnet and what purpose do they each serve?


• How can the strength of an electromagnet be changed?


• Why is an electromagnet considered a temporary magnet?


Answer the following questions about motors and generators.

• What components are needed for a generator to produce electric current?

• Describe motors and generators in terms of energy input and output.




HELP MEEEEEEEE
Decide if the following statements would be found in the Motor or Generator. Answers can be found at the end of the 3.07 Reading.

Statement Motor or Generator?

Answers

Answer:

R u from k12?? i am XD add me on discord my username is Hot Boy#1650

Explanation:

a Venus fly trap is an......... plant.​

Answers

Answer:

A Venus flytrap is a perennial carnivorous plant.

I hope it helps

plant that eats meat

In each of the given pairs, choose which element will have the bigger atom. Give reasons for your choice. (a) Mg (atomic number 12) or Cl (atomic number 17) (b) Na (atomic number 11) or K (atomic number 19)

Answers

Answer:

Mg (atomic number 12)

K (atomic number 19)

Explanation:

The size of an atom is estimated in terms of its atomic radius.

The atomic radius is taken as half of the inter-nuclear distance between two covalently bonded atoms of non-metallic elements or half of the distance (d) between two nuclei in the solid - state of metals.

Across a period, atomic radii decrease progressively from left to right. This is due to the progressive increase in the nuclear charge without increase in the number of electronic shells. Down a group, atomic radii increase progressively due to the successive shells of electrons being added which have been compensated for by the increase in nuclear charge.

Cl is further right of Mg in the third period

K is below Na in the first group

Suppose a signal from a vibrating motor is to be sampled discretely with a digital data acquisition system to determine the RPM of the motor. It is known that the maximum possible RPM is 1800. What is the minimum sampling frequency (in Hz) with which the signal can be sampled in order to measure the RPM of the motor

Answers

Answer:

f > 60 Hz

Explanation:

According to Nyquist's Sampling Theorem, to be fully reconstructed without any aliasing,  the signal must be sampled at least more than twice during the period of the maximum frequency of the signal.In this case, the signal to be sampled has only one frequency.However, as we have the information in RPM, we need to convert this to cycles/sec (Hz) first, as follows:

       [tex]f = \frac{1800 rev}{min} * \frac{1 min}{60 sec} = 30 Hz[/tex]

Per Nyquist, fs > 2*30 Hz

        ⇒ fs > 60 Hz

Type your response in the box.
Different kinds of substances have different properties. Compare and contrast the electrical properties of salts, acid , metals

Answers

Answer:

salts do not conduct electricity. unless u try to dissociate its ions,it cannot.

metals are good conductors of electricity.

acids also conduct electricity if you dissociate them into ions.

I WILL GIVE BRAINLIEST
In which of the following locations would most likely find parenchyma cells? Leaves roots flowers bark

Answers

Answer:

I would guess its leaves

Answer:

Leaves

Explanation:

During which process of the water cycle does water change from a gas to liquad

Answers

Condensation is the process by which water vapor in the air is changed into liquid water. Condensation is crucial to the water cycle because it is responsible for the formation of clouds.

Peter is running laps around a circular track with a diameter of 100 meters. If it takes Peter 12 minutes to run 4 laps, how quickly is he running (in meters per second)?

Answers

Answer:

v = 1.74 m/s

Explanation:

Given that,

Diameter of a circular track, d = 100 m

Distance covered for the 4 laps,

[tex]D=4\pi d\\\\D=4\pi \times 100\\\\D=1256.63\ m[/tex]

Time, t = 12 minutes = 720 s

We need to find the velocity of the peter. It can be calculated as follows :

[tex]v=\dfrac{D}{t}\\\\v=\dfrac{1256.63\ m}{720\ s}\\\\v=1.74\ m/s[/tex]

So, the speed is running with a velocity of 1.74 m/s.

Peter is running at 1.7453 m/sec.

Given to us,

Diameter of the circular track, D = 100 meters,

Number of laps Peter run, L = 4 laps,

Time taken by Peter, t = 12 minutes,

1 lap = circumference of the circle,

4 laps = 4 x circumference of the circle,

As we know, the circumference of a circle is given by πD.

So, 4 laps = 4 x circumference of the circle,

[tex]\begin{aligned}4 laps &= 4\times \pi \times D\\&= 4 \times \pi \times 100\\& = 1,256.6370\ meters\\\end{aligned}[/tex]

Also, we know that 1 minute has 60 sec.

so, 4 minutes = (4 x 60) seconds

Further, speed is given [tex]\bold{(\dfrac{Distance}{Time} )}[/tex]

Thus,

[tex]\begin{aligned}speed &= \dfrac{Distance\ coverd\ by\ Peter}{Time\ taken\ by\ Peter}\\&=\dfrac{1,256.6370}{12\times 60}\\&=1.7453\ m/sec \end{aligned}[/tex]

Hence, Peter is running at 1.7453 m/sec.

To know more visit:

https://brainly.com/question/7359669

Why is our (a person's) gravitational pull NOT as strong as the Earth's gravitational pull
on us?
Gravity doesn't act on us
The Earth is closer to us than the Moon
Our mass doesn't change so the pull is really the same
We are much smaller than the Earth.

Answers

Answer:With gravity, two things with mass will want to move toward each other. However, we humans don't feel our gravity pulling on another person because it's not very big, but we do all feel the pull of Earth's gravity all the time - we're not all floating in the air, because that would be happening without Earth's gravity!

Explanation:

Two protons are a distance 3 10-9 m apart. What is the electric potential energy of the system consisting of the two protons

Answers

Answer:

The electric potential energy of the system is 7.87x10⁻²⁰ J.

Explanation:

The electric potential energy is given by:

[tex]E = \int{Fdr} = \frac{Kq_{1}q_{2}}{r}[/tex]

Where:

q₁ = q₂ is the charge of the protons = 1.62x10⁻¹⁹ C

r is the distance = 3x10⁻⁹ m

K: is the electrostatic constant = 9x10⁹ Nm²/C²

[tex] E = \frac{Kq_{1}q_{2}}{r} = \frac{9\cdot 10^{9} Nm^{2}/C^{2}*(1.62 \cdot 10^{-19} C)^{2}}{3\cdot 10^{-9} m} = 7.87 \cdot 10^{-20} J [/tex]

Therefore, the electric potential energy of the system is 7.87x10⁻²⁰ J.

I hope it helps you!

The electric potential energy of the system should be 7.87x10⁻²⁰ J.

Calculation of the electric potential energy:

SInce We know that

fdr = kq1q2/r

Here

q₁ = q₂ i.e. is the charge of the protons = 1.62x10⁻¹⁹ C

r should be the distance = 3x10⁻⁹ m

K should be the electrostatic constant = 9x10⁹ Nm²/C²

Now electric potential energy should be

= (9x10⁹ Nm²/C² * 1.62x10⁻¹⁹ C) /  3x10⁻⁹ m

=  7.87x10⁻²⁰ J.

hence, The electric potential energy of the system should be 7.87x10⁻²⁰ J.

learn more about energy here: https://brainly.com/question/17384612

A car starts from rest and accelerates for 7.2 s with an acceleration of 1.4 m/s2. How far does it travel? Answer in units of m.

Answers

Answer:

xn = 36.28 [m]

Explanation:

To solve this problem we must use the following equation of kinematics, which is ideal for a body that moves with constant acceleration.

[tex]x=x_{0}+(v_{o} *t)+(\frac{1}{2} )*a*t^{2}[/tex]

where:

x - xo = displacement of the car [m]

Vo = initial velocity = 0

t = time = 7.2 [s]

a = acceleration = 1.4 [m/s^2]

The initial velocity is zero, as the car begins its movement from rest.

xn = (x - xo), Now replacing

xn = (0*7.2) + 0.5*1.4*(7.2^2)

xn = 36.28 [m]

The Intensity level of a loud saw is 100 db at a distance of 5m. At what distance would the level be 80 db

Answers

Answer:

50 m

Explanation:

The relationship between the intensity of sound in dB and distance is given by the formula:

[tex]B_2=B_1+20log(\frac{R_1}{R_2} )\\\\Where \ B_2\ is \ the\ sound\ intensity\ at\ distance\ R_2\ and\\B_1\ is \ the\ sound\ intensity\ at\ distance\ R_1\ \\\\Given\ that: B_1=100\ dB, R_1=5\ m, B_2=80\ dB\\\\B_2=B_1+20log(\frac{R_1}{R_2} )\\\\80=100+20log(\frac{5}{R_2} )\\\\-20=20log(\frac{5}{R_2} )\\\\log(\frac{5}{R_2} )=-1\\\\\frac{5}{R_2}=10^{-1}\\\\\frac{5}{R_2}=0.1\\\\R_2=5/0.1=50\ m[/tex]

Pressure and temperature ______ with depth below Earth’s surface.

Answers

Answer:

Pressure increases as you move deeper below earth's surface.

Tempurature  increases as you move deeper below earth's surface.

Hope this helps!

Explanation:

A car traveling at 32.4 m/s skids to a stop in 4.55 s. Determine the skidding distance of the car (assume uniform acceleration).

Answers

Answer:

x = 73.71 [m]

Explanation:

In order to solve this problem we must use two formulas of kinematics. It is important to make it clear that these formulate are for uniformly accelerated motion, i.e. with constant acceleration.

[tex]v_{f }= v_{i}-(a*t)[/tex]

where:

Vf = fnal velocity = 0

Vi = initial velocity = 32.4 [m/s]

t = time = 4,55 [s]

a = acceleration or desacceleration [m/s^2]

0 = 32.4 - (a*4.55)

a = 7.12 [m/s^2]

Note: it is important to clarify that the negative sign in the above equation is because the car stops and decreases its speed to zero, thus its final velocity is equal to zero.

Now using the following equation:

[tex]x = x_{o} + (v_{i}*t)-(\frac{1}{2} )*a*t^{2}[/tex]

where:

xo = initial distance = 0

x = final distance [m]

Therefore we have:

x = 0 + (32.4*4.55) - (0.5*7.12*4.55^2)

x = 73.71 [m]

A fountain shoots a jetof water straight up. The nozzle is 1 cm in diameter and the speed of the water exiting the nozzle is 30 m/s. What is the force exerted by the water jet

Answers

Answer:

Explanation:

mass of water coming out per second = A x v where A is area of cross section of the nozzle and v is velocity of water

A = 3.14 x .005²

= 785 x 10⁻⁷ m²

mass of water coming out per second = 785 x 10⁻⁷ x 30 = 23.55 x 10⁻⁴ kg

momentum of this mass = 23.55 x 10⁻⁴ x 30 = 706.5 x 10⁻⁴ kg m /s .

Rate of change of momentum  = 706.5 x 10⁻⁴

Let force be F

F - mg = 706.5 x 10⁻⁴

F = mg + 706.5 x 10⁻⁴

F =  23.55 x 10⁻⁴  x 9.8 + 706.5 x 10⁻⁴

= 937.3 x 10⁻⁴ N .



A football team lost 3 yards on their first play. On the second play, 10 yards were gained. On the third play the quarterback got tackled behind the line of scrimmage and lost 6 yards. What was their net gain or loss after the three plays?​

Answers

+1yd

Explanation:

Kfgjjh

Answer:

+1 YD

Explanation:

-3 + 10 - 6 = 1

What is your role in motivating yourself?

Answers

i typically focus on motivating others.. i wanna be a motivational speaker someday. tbh if anyone needs anyone to talk to id be happy to listen and i would give the best advice i can. heres my discord: ionknow22#2868

HELP PLS!!

In a full/angled projectile, Vty is equal to the inverse of viy
O True
O False

Answers

The answer is. False.

Who ever answers first get Brainliest!
How is power passed down in a dynasty?

through a family bloodline
through a religious council
through an arranged marriage
through a military commander

Answers

Through a family bloodline
Your answer should be Through a family bloodline ;)
Hope this helps ..
Other Questions
What causes the air above a pot of boiling water to become warm?The air transfers thermal energy to the water vapor. The water vapor transfers thermal energy to the air. The particles in the air lose kinetic energy. The particles in the water vapor gain kinetic energy. What do you find most challenging (difficult)about virtual school The standard height from the floor to the bull's-eye at which a standard dartboard is hung is 5 feet 8 inches. A standard dartboard is18 inches in diameter.Suppose a standard dartboard is hung at standard height so that the bull's-eye is 11 feet from a wall to its left.Samuel throws a dart at the dartboard that lands at a point 11.5 feet from the left wall and 5.5 feet above the floor.Does Samuel's dart land on the dartboard? The following are selected account balances from Penske Company and Stanza Corporation as of December 31, 2021: Penske Stanza Revenues $(842,000 ) $(568,000 ) Cost of goods sold 299,700 142,000 Depreciation expense 207,000 304,000 Investment income Not given 0 Dividends declared 80,000 60,000 Retained earnings, 1/1/21 (668,000 ) (222,000 ) Current assets 572,000 566,000 Copyrights 1,076,000 449,500 Royalty agreements 604,000 1,180,000 Investment in Stanza Not given 0 Liabilities (546,000 ) (1,631,500 ) Common stock (600,000 )($20 par) (200,000 ) ($10 par)Additional paid-in capital 150,000 80,000On January 1, 2013, Penske acquired all of Stanza's outstanding stock for $680,000 fair value in cash and common stock. Penske also paid $10,000 in stock issuance costs. At the date of acquisition copyrights (with a six-year remaining life) have a $440,000 book value but a fair value of $560,000. a. As of December 31,2013, what is the consolidated copyrights balance? b. For the year ending December 31,2013, what is consolidated net income? c. As of December 31,2013, what is the consolidated retained earnings balance? d. As of December 31,2013, what is the consolidated balance to be reported for goodwill? a group of people with common practices, activities, and interests is called a _____.classsocietygovernment ASAP Describe the difference between each of these terms and the structure of each kind of fat- Saturated fats, Unsaturated fats, Polyunsaturated fats A refrense to the life of Jesus Christ is an example of... create a simile using the beggining phrases, my life is like.. my teach is like.. my best friend is like.. How do the test variables (independent variables) and outcome variables (dependent variables) in an experiment compare? A. The test variables (independent variables) and outcome variables (dependent variables) are the same things. B. The test variable (independent variable) controls the outcome variable (dependent variable). C. The test variable (independent variable) and outcome variable (dependent variable) have no affect on each other. D. The outcome variable (dependent variable) controls the test variable (independent variable). CHEMISTRY!! 50 POINTS!There are 5.5 L of a gas present at -38.0 C. What is the temperature if the volume of the gas has changed to 1.30 L? From the list of ways that river systems helped early civilization, which answers (2) do not belong? *TransportationGrowing cropsPollutionCleaningDrinking waterFishingHunting A(n) ______ is a graphic description of positions and lines of authority and responsibility in an organization or unit.A. flow chartB. Company chartC. Line chartD. Organizational chart What is one of the four freedoms that Roosevelt identifies in his FourFreedoms speech?A. Freedom to bear armsB. Freedom from oppressionC. Freedom of religionD. Freedom of wealth Which feature do Christianity, Islam, and Judaism have in common?O A. Each religion believes in reincarnation.B. Each religion is violently opposed to secularism.C. Each religion worships only one god.O D. Each religion considers Muhammad a prophet. How do you do this question? PLEASE HELPPP!!!! Which two positions needs less than one year of training?emergency medical technicianoccupational therapy assistantphysician assistantsocial workercertified nurse aide Please hurry dont have much time thxs 62+3100000000000000000000000000000000000000000 PLZ PLZ HELLPP MEEE will mark brainliest Which of the following does not occur in an aquatic ecosystem as a result of nutrient loading?a. acidification of the waterb. algae growth as a result of eutrophicationc. degraded quality of water for human and livestock consumptiond. improved water habitats for human recreation Someone please help! Asap