what is the electric field strength at a distance of .50 m from a 1.00x10^-6 c charge?

Answers

Answer 1

Answer:

e = k q / r² then,

e = 9×10^9 * 1×10^-6 / 50² = 3.6 N/C

hope this helps ❤.


Related Questions

a plane mirror forms a virtual image why​

Answers

Light rays from the object strike the mirror and reflect according to the law of reflection. This image is called a virtual image because the light does not actually pass through the image. Because the rays of light never meet at a real focus and the image cannot be obtained on a screen

Line segment Q R , Line segment R S and Line segment S Q are midsegments of Î"WXY. Triangle R Q S is inside triangle X Y W. Point R is the midpoint of side X Y, point S is the midpoint of side Y W, and point Q is the midpoint of side X W. The length of Q R is 2. 93 centimeters, the length of R S is 2. 04 centimeters, and the length of Q S is 2. 28 centimeters. What is the perimeter of Î"WXY? 11. 57 cm 12. 22 cm 12. 46 cm 14. 50 cm.

Answers

The perimeter of ΔWXY is : ( D ) 14.5 cm

Calculating the perimeter of ΔWXY

QR = WY / 2

RS = XW / 2

QS = XY / 2

Given that : QR = 2.93 cm ,  RS = 2.04 cm,  QS = 2.28 cm

Therefore

Perimeter of ΔWXY = ∑ WY + XW + XY  

                                 = 2SR + 2QS + 2QR

                                 = 2(2.04) + 2(2.28) + 2(2.93)

                                 = 14.5 cm

Hence we can conclude that the perimeter of ΔWXY = 14.5 cm

learn more about perimeter calculations : https://brainly.com/question/24744445

Answer:

The name of the shape on the right is M prime N prime O prime P prime Q prime R prime S prime because it is the image of the shape on the left.

Explanation:

what is the velocity of a 50 kg dog with 3000 j of kinetic energy

Answers

Answer:

KE = 225000000 J

Explanation:

Answer:

10.954. from equation. KE=1/2m(v^2)

2KE=m(v^2) 6000=50(v^2) (v^2)=6000/50

(v^2)=120. square root for all v=10.954 m/s

Which are the most likely products for the following reaction? Zn + CuSO4 --> ?

Answers

Answer:

It's going to be a single displacement reaction

So we'll get ZnSO4 + Cu for the following reaction Zn + CuSO4

Equation:

Zn + CuSO4 ------> Cu + ZnSO4

what is the energy (in j) of a photon required to excite an electron from n = 2 to n = 8 in a he⁺ ion? submit an answer to three signficant figures.

Answers

Answer:

Approximately [tex]5.11 \times 10^{-19}\; {\rm J}[/tex].

Explanation:

Since the result needs to be accurate to three significant figures, keep at least four significant figures in the calculations.

Look up the Rydberg constant for hydrogen: [tex]R_{\text{H}} \approx 1.0968\times 10^{7}\; {\rm m^{-1}[/tex].

Look up the speed of light in vacuum: [tex]c \approx 2.9979 \times 10^{8}\; {\rm m \cdot s^{-1}}[/tex].

Look up Planck's constant: [tex]h \approx 6.6261 \times 10^{-34}\; {\rm J \cdot s}[/tex].

Apply the Rydberg formula to find the wavelength [tex]\lambda[/tex] (in vacuum) of the photon in question:

[tex]\begin{aligned}\frac{1}{\lambda} &= R_{\text{H}} \, \left(\frac{1}{{n_{1}}^{2}} - \frac{1}{{n_{2}}^{2}}\right)\end{aligned}[/tex].

The frequency of that photon would be:

[tex]\begin{aligned}f &= \frac{c}{\lambda}\end{aligned}[/tex].

Combine this expression with the Rydberg formula to find the frequency of this photon:

[tex]\begin{aligned}f &= \frac{c}{\lambda} \\ &= c\, \left(\frac{1}{\lambda}\right) \\ &= c\, \left(R_{\text{H}}\, \left(\frac{1}{{n_{1}}^{2}} - \frac{1}{{n_{2}}^{2}}\right)\right) \\ &\approx (2.9979 \times 10^{8}\; {\rm m \cdot s^{-1}}) \\ &\quad \times (1.0968 \times 10^{7}\; {\rm m^{-1}}) \times \left(\frac{1}{2^{2}} - \frac{1}{8^{2}}\right)\\ &\approx 7.7065 \times 10^{14}\; {\rm s^{-1}} \end{aligned}[/tex].

Apply the Einstein-Planck equation to find the energy of this photon:

[tex]\begin{aligned}E &= h\, f \\ &\approx (6.6261 \times 10^{-34}\; {\rm J \cdot s}) \times (7.7065 \times 10^{14}\; {\rm s^{-1}) \\ &\approx 5.11 \times 10^{-19}\; {\rm J}\end{aligned}[/tex].

(Rounded to three significant figures.)

In an inelastic collision:

I. only momentum is conserved

II. only kinetic energy is conserved

III. momentum and kinetic energy are both conserved.

IV. neither momentum nor kinetic energy are conserved.

Answers

Hi there!

I. Only momentum is conserved.

An inelastic collision means that there is a LOSS in the KINETIC ENERGY of the system.

However, momentum is ALWAYS conserved for every type of collision unless there is an external force acting on the system.

I think it’s I.
Hope this will help.

what is the theory relativity by Einstein? ​

Answers

:MAIN ANSWER:

determined that the laws of physics are the same for all non-accelerating observers

Explanation:

Albert Einstein, in his theory of special relativity, determined that the laws of physics are the same for all non-accelerating observers, and he showed that the speed of light within a vacuum is the same no matter the speed at which an observer travels, according to Wired.

HOPE IT HELPS

#CARRY ON LEARNING

HAPPY HOLIDAYS DEC 2021

Calculate the resistance of a 1km length, 1mm diameter wire made from:

a) constantan (\rho = 4.9 × 10-7 Ωm)
b) copper (\rho = 1.7 × 10-8 Ωm)

c) State which material is better suited for being used to make resistors, and justify your answer.
d) With 1 amp of current flowing through each of the wires how much energy is converted to heat?
e) What potential difference would be needed to force a current of 1 amp through that length of each type of wire?

Answers

From the values of resistivity, the resistance of copper wire is 22 Ω.

Let us recall that;

R = ρl/A

ρ = resistivity

l = length of the wire

A = cross sectional area of the wire

For constantan;

R = 4.9 × 10^-7  × 1 × 10^3/[3.14 × ((1 × 10^-3)/2)^2]

R = 620 Ω

For copper;

R =  1.7 × 10-8 × 1 × 10^3/[3.14 × ((1 × 10^-3)/2)^2]

R = 22 Ω

The material that is best suitable to make resistors is constantan wire.

For constantan, the energy converted to heat is;

I^2 R = (1)^2 ×  620 Ω = 620 W

For copper, the energy converted to heat is;

I^2R = (1)^2 × 22 Ω = 22Ω

The potential difference of constantan = IR = 1 ×  620 Ω =   620 V

The potential difference of copper =  = IR = 1 ×  22Ω  = 22 V

Learn more about resistivity:https://brainly.com/question/8106379

0. Kedija walked 300m from A to B and returned back and walked 200m and then stopped at 'C', what
is her change in position from A to in the figure below
300m
200m
A
С
B
C/-500m
D 100m
B/ -100m
A Soom

Answers

Answer:

100

Explanation:

Displacement is the shortest line between the starting point and the ending point

so , the starting point is "A"

,the ending point is "C"

so "AC" = AB - CB = 300 - 200 = "100"

During which time does Jamal have the greatest momentum?

Answers

Answer:

Momentum Packet Answer KEY - Science Online

YOU WILL SEE THE PDF

Can someone please give me the (Answers) to this? ... please ...

Answers

Answer:

Jake’s horse will only need to exert enough force to make the carriage accelerate. Even though the carriage will pull on the horse as well, that force is not enough to make the horse accelerate in the direction of the carriage because it is only strong enough to make the carriage accelerate, not the horse.

Explanation:

Additional info: the horse has more mass than the carriage does so it would require a stronger force to make the horse accelerate.

Answer: Jake’s horse will only need to exert enough force to make the carriage accelerate .Since the horse has a greater mass than the carriage, it requires a stronger force to make the horse accelerate.

Explanation: Sorry it took so long lol

Elliot jumps up and down on a pogo stick. He weighs 600.N, and his pogo stick has a spring with spring constant 1100N/m. What is the height he will reach when he has gravitational potential energy 250J? m

Answers

From conservation of energy, the height he will reach when he has gravitational potential energy 250J is 0.42 meters approximately

The given weight of Elliot is 600 N

From conservation of energy, the total mechanical energy of Elliot must have been converted to elastic potential energy. Then, the elastic potential energy from the spring was later converted to maximum potential energy P.E of Elliot.

P.E = mgh

where mg = Weight = 600

To find the height Elliot will reach, substitute all necessary parameters into the equation above.

250 = 600h

Make h the subject of the formula

h = 250/600

h = 0.4167 meters

Therefore, the height he will reach when he has gravitational potential energy 250J is 0.42 meters approximately

Learn more about energy here: https://brainly.com/question/24116470

Two students are sitting on a see-saw. The length of the board is 2 meters with the
pivot point being in the very center. One student sitting on the end of the left side
has a mass of 34 kg. If the student sitting on the right has a mass of 42.5 kg, where
should she sit for the see-saw to be in equilibrium?

Answers

To solve the problem it is necessary to apply the concepts of Torque and equilibrium.

The Torque is defined as:

Where

F= Force

d = Distance

In this particular case, the force is caused by the weight of both children.

In turn, when there is equilibrium, the two torques must be equal therefore

Replacing with our values

Re-arrange to find  

Therefore the distance that the second kid should sit to balance the see-saw is 1.8m from the pivot.

if a 1000kg car goes from a speed of 6.5 m/s to a stop in 3 seconds what is the force acting on the car

Answers

Answer:

-6500N

Explanation:

F = ma

Note:  1N = 1 kg⋅m⋅s−2

a = (0-6.5m/s)/3s

a = -6.5m/s^2

F = 1000kg(-6.5m/s^2)

F = -6500kgm/s^2

F = -6500 N

A student noted that the sign shown here is always associated with a wheelchair ramp at or near a staircase or entrance steps. What statement best identifies the reason why wheelchair ramps are used to move people up a staircase or steps?

Answers

The main reason why wheelchair ramps are used to move people up a staircase is because it has a high mechanical advantage which leads to a greater efficiency in moving people up the staircase.

Let the height of the staircase = hLet the length of the ramp = L

The mechanical advantage of the ramp is calculated as follows;

[tex]M.A = \frac{L}{h}[/tex]

As the length of the ramp increases, people will be move up to a greater distance up the staircase.

Thus, the main reason why wheelchair ramps are used to move people up a staircase is because it has a high mechanical advantage which leads to a greater efficiency in moving people up the staircase.

Learn more about mechanical advantages of ramps here: https://brainly.com/question/200179

Before Collision:
2,000 kg 4 m/s 4,000kg 0 m/s

After collision: 2,000 kg + 4,000kg Vt = ?

I will give Brainliest to the first person. Please show work

Answers

Answer:

  4/3 m/s

Explanation:

Assuming momentum is conserved, the sum of products of mass and speed before the collision is the same as after:

  (2000 kg)(4 m/s) +(4000 kg)(0 m/s) = (2000 +4000 kg)(Vt)

  Vt = (8000 kg·m/s)/(6000 kg) = 4/3 m/s

The speed of the combined objects after the collision is 4/3 m/s.

how long does it take a man to travel 6 km if his speed is 3km/h?

Answers

why did my answer get deleted??

oh yeah i put a link on there- oopsies.

I wont this time!

I got 30!

what is the horse power of an electric motor which can do by 1250 joule of work in 5 seconds​

Answers

1250 J in 5 sec= 250 Joule(s) per second (1250/5 0

250 Joules per second = 250 Watts ( 1J/s = 1 Watt per definition)

250 Watts output = 250/0.65 efficiency = 384 Watts input

1 Horsepower = 732 Watts

Motors 1 Horsepower and under are made in certain step sizes like

3/4 , 1/2 , 1/3, 1/4, 1/16 1/20 of a Horsepower.

3/4 Horsepower is 549 Watts

1/2 Horsepower is 366 Watts

so you need to 3/4 horsepower motor to achieve 1250 J of work in 5 seconds.

2. Think about an activity you may have learned that involves muscle memory. Consider when you first learned the activity, how easy or difficult it was the first time, and if you can do it now without thinking. What happened in your brain during practices that resulted in muscle memory for you?

Answers

Answer:

Muscle memory is found in many everyday activities that become automatic and improve with practice, such as riding bicycles, driving motor vehicles, playing ball sports, typing on keyboards, entering PINs, playing musical instruments, poker, martial arts, and dancing.

Explanation:

What is the main force that must be overcome in order to push an object along a horizontal surface. no silly answers

Answers

Answer:

Frictional force

Explanation:

The force that must be overcome in order to push an object along a horizontal surface is frictional force

If the force is more than frictional force the object moves

How many cm3 are there in 1 dm3?

Answers

The answer is in the picture.

A textbook is sitting at rest on a desk. Compared to the magnitude of the force of the textbook on the desk, how
would you describe the magnitude of the force of the desk on the book?
o less
O zero
O more
O equal

Answers

Equal because the book is not moving and the forces are balanced/equal

A car takes off from rest takes of from rest and covers a distance of 80m on a straight road in 10s.Calculate the magnitude of its acceleration.​

Answers

Initial velocity (u) = 0 m/s [the car was at rest]Distance (s) = 80 mTime (t) = 10 sLet the magnitude of acceleration be a.By using the equation of motion, [tex]s = ut + \frac{1}{2} a {t}^{2} [/tex]we get,[tex]80 = 0 \times 10 + \frac{1}{2} \times a \times {10}^{2} \\ = > 80 = \frac{1}{2} \times 100a \\ = > 80 = 50a \\ = > a = \frac{80}{50} \\ = > a = 1.6[/tex]

Answer:

The magnitude of its acceleration is 1.6 m/s^2.

Hope you could get an idea from here.

Doubt clarification - use comment section.

The Doppler technique for planet detection has found Earth-like planets around nearby Sun-like stars. (True or False) ____________________

Answers

Answer: false

Explanation:

What happens to all light bulbs in a series circuit when one burns out? How would the situation change when the lights are hooked up in parallel?

Answers

In a series circuit if one light bulb burns out then all of the light bulb would burn out. In a parallel the light bulbs are put in their own pathways so if one burns out the others won't

A wave has wavelength of 10 m and a speed of 340 m/s. What is the frequency of the wave?
I need the Formula,Known,Substitute & Solve Answer with Units

Answers

Answer:

This is the answer that I got.

Explanation:

Hope it is right.

Draw a nitrogen cycle and explain in short.
please help me ​

Answers

Answer:   biogeochemical process

Explanation:

what is a joule in physics?​

Answers

Explanation:

Joule is unit of work or energy in the International System of Units (SI)

[tex] \large \mathfrak {Formula}[/tex]

work (joules) = force (newtons) x distance (meters)

[tex] \large\mathfrak{Invented \: by} [/tex]

James Prescott Joule

A diffraction grating is 1.50 cm wide and contains 2000 lines. When used with light of a certain wavelength, a third-order maximum is formed at an angle of 20.0°. What is the wavelength (in nm)?

Answers

Answer:

because of the gravity of the earth

the gravitational force acts on all objects in proportion to their mass. neglecting air resistance, why don’t heavy objects fall faster than light ones?

Answers

Answer:

Because in correspondence to the same distance from a mass, the gravitational acceleration is the same for all the bodies. It doesn't depend on the mass of the objects.

Other Questions
Write the following statements in the form of equations.a. The sum of five times p and 8 is 23.b. If you subtract 6 from 3 times a number, you get 18.c. One third of a number plus 7 is 26. A 16.0 kg canoe moving to the left at 12.5 m/s makes an elastic head on collision with a 14.0 kg raft moving to the right at 16.0 m/s after the collision the raft moves to the left at 14.4 m/s assuming water simulates a frictionless surface, what is the final velocity of the canoe? What is 0.459 roused to the nearest hundredth What two factors contributed to the fall of the Western Roman Empire? hunter has a jar of 368 nickels and dimes. the total value of coins is $28.40. which system of equations below would be the best to use to find the number of nickels and dimes hunter has? Which of The following is a kind of pottery that became a major item of trade during China's Golden Age.A. IvoryB. Porcelain C. Silk D. Gunpowder What is three minus X equals 11 Determine whether the graph represents a function. * the term ""gangsta rap"" held no varying definition than regular ""rap."" it was solely a title created by concerned parents to justifiably shun the style. a water balloon is thrown a target at 18 m/s. if the water balloon has a mass of 0.4 kg, what is the momentum? How many lines of symmetry does this have it. If none put 0. according to the table, in which year did buyers of six-month treasury bills receive the highest real return on their investment? 3Where are the highest and lowest altitudes answer who wants to help i really dont wanna do this question What are the base units the SI units are based on?A-10B-100C-1,000D-1 The store paid 4.50 for a book and sold it for $7.65.what is the profit as a percent of the cost to the store? A. 3. 15% b. 58.8% c. 70% d. 315% Geologists study the density of seismic activity in a region by comparing the number of earthquakes to the area of the region. The seismic activity density of a region is found using the formula: seismic activity density = StartFraction number of earthquakes Over area of land affected EndFraction. The state of California covers approximately 103,718 mi2, and has a seismic activity density of 0. 0964 earthquakes per square mile. The state of Alaska covers approximately 570,641 mi2, and has a seismic activity density of 0. 491. Using this data and rounding to the nearest whole number, Alaska had more earthquakes than California for the year. Why would the seismic activity density of the year for Alaska be smaller than for California if Alaska had more earthquakes?. You are performing CPR on a child when another person arrives with the AED you notice that the AED does not have child pads what should you do? How creepy was it when the strange figure grabbed onto Sierra's hand and Robbie suddenly vanished. Can you think on anything that made you very afraid and "creeped out)? NO LINKSwhat was the main drawback of ford's assembly lineA.)the cars broke down quicklyB.)production of the cars required many hours of laborC.) The cars required a lot of fuel to runD.)production was not flexible