The atomic number is 4.
The atomic number of the given atom is equal to 4.
What is the atomic number?The atomic number (symbol Z) of a chemical element can be defined as the charge number of an atomic nucleus. For an ordinary atom, the atomic number is equal to the number of protons found in the nucleus of an atom of that element.
The atomic number helps to uniquely identify ordinary chemical elements. In an ordinary uncharged atom or neutral atom, the atomic number of that atom is also equal to the number of electrons.
For a neutral atom, the sum of the atomic number and the neutron number gives the atomic mass. The protons and neutrons have approximately the same mass. Atoms that have the same atomic number but different numbers of neutrons or different mass numbers are known as isotopes.
Given the number of electrons in the atom is 4. Therefore, the atomic number of that atom will be equal to 4.
Learn more about the atomic number, here:
https://brainly.com/question/
#SPJ2
Which would most likely be done while designing a solution?
researching the current uses of a fuel type
sketching a diagram of a new medical device
reporting the results of using a prototype
redesigning a model airplane that did not fly well
Answer:
sketching a diagram of a new medical device (b)
Explanation:
its on edge technical design not d i got that one wrong
Answer:
the answer is b
Explanation: i took the test edge 2021
Which statement describes a controlled experiment? A.) It has one group in which the controlled variable is tested, and another in which the manipulated variable is tested. B.) It has one group in which the responding variable is tested, and another in which the responding variable is not tested. C.) It has one group in which the manipulated variable is tested, and another in which the responding variable is tested. D.) It has one group in which the manipulated variable is tested, and another in which the manipulated variable is not tested.
Answer:C.) It has one group in which the manipulated variable is tested, and another in which the responding variable is tested
Explanation: hope this helps
The statement that describes a controlled experiment is that it has one group in which the manipulated variable is tested, and another in which the responding variable is tested (option C).
What is a controlled experiment?A controlled experiment is an experiment where one variable is tested at a time and all other variables are kept constant.
An experiment consists of a manipulated or independent variable, which is the variable changed, and a responding or dependent variable, which is the variable measured.
Therefore, statement that describes a controlled experiment is that it has one group in which the manipulated variable is tested, and another in which the responding variable is tested.
Learn more about experiment at: https://brainly.com/question/11505552
#SPJ5
brownie mix a homogeneous or a heterogeneous mixture
pls helpppp
Describe how you would measure the density of a boat (how would you predict if it would float )
Answer:
Please find the description below
Explanation:
The density of a substance refers to its mass per unit of its volume i.e the amount of a substance contained in a given volume. The density is calculated using the formula:
Density = mass/volume
Using this formula, with the known value for mass and volume of the boat, the density of the boat can be calculated.
An object will FLOAT on a liquid substance if its density is lower than that of the liquid while it will SINK if it has a higher density than that of the liquid.
In this case, with a known density of water, which is 1g/cm^3 or 1000kg/m^3,
a boat placed on water will FLOAT if its density is <1g/cm^3 (less than) while it will SINK if its density is >1g/cm^3 (greater than).
1. Which statement best describes why a gas is
easily compressible while most solids
are incompressible?
A. The molecules of a gas are much smaller
than those of a solid.
B. The molecules of a solid are not attracted to
one another.
C. The molecules of a gas are much further
apart than those of a solid.
D. The molecules of a solid are much larger
than those of a gas.
C) The molecules of a gas are much further
apart than those of a solid.
A gas is easily compressible while most solids are incompressible because the molecules of gas are much further apart than those of a solid.
What are gases?Gases is one of the four fundamental state of matter.
Gases can be defined as phase of matter that neither have fixed shape nor have fixed volume.
The molecules of gases are far apart from each other as compare to other phases of matter.
The change in properties of volume is known as compressibility and those fluid whose volume changes are known as compressible fluids or gases.
The fluids which does not compressed or expanded and its volume remain constant are known as incompressible fluids or gases.
Thus, gas is easily compressible while most solids are incompressible because the molecules of gas are much further apart than those of a solid.
To learn more about gases, refer to the link below:
https://brainly.com/question/1369730
#SPJ2
Approximately how tall is Baker Hill? Don't forget your unit
Answer:
the elevation is 1,539
Explanation:
similarities about homogeneous and heterogeneous mixtures
Answer:
A homogeneous mixture has the same uniform appearance and composition throughout. Many homogeneous mixtures are commonly referred to as solutions. A heterogeneous mixture consists of visibly different substances or phases. The three phases or states of matter are gas, liquid, and solid.
Explanation:
yea
plz answer soon need answer
when talking about sodium carbonate reaction as the amount of surface area increases what happens to the rate of this reaction????
rate is faster
rate is slower
rate stays same
Answer:
rate is faster
Explanation:
the rate of reaction increases.
Answer:
The rate is faster
Explanation:
just did it on edg :)
Stars form inside giant clouds of gas and dust. What are these giant clouds of gas and dust called?
A.) Supernova
B.) Quasar
C.) nebula
D.) Black hole
Which of the following is NOT an extensive property?
Answer:
Density
Explanation:
It's an intensive property because it doesn't depend on mass
Is this atom Reactive (unstable) or Unreactive (stable) ?
Answer:
The answer is Unreactive.
Explanation:
This is an unreactive atom because it has completely filled out stable electrons in the outer shell.
8 electrons in the outer shell means stable.
A) remove 1.5ml of liquid
B) add 1.5 ml of liquid
C) remove 0.5 ml of liquid
D) add 0.5 mo of liquid
Why are scientific models important in the study of science?
Answer:
In science, amodel is a representation of an idea, an object or even a process or a system that is used to describe and explain phenomena that cannot be experienced directly. Models are central to what scientists do, both in their research as well as when communicating their explanations.
Explanation:
Answer:
They always involve critical mathematical calculations.
Explanation:
tell me if im wrong but this one makes the most since to me
Students learned that objects can exert forces on other objects without touching. Which three investigations will provide evidence what they have learned. a measuring how close a soda can must be before it rolls toward a balloon that has been rubbed
Answer:
b
Explanation:
Environmental science is a *
A. narrowly defined set of physical, life, and social sciences.
B. subject that only deals with the environment.
C. collective of like-minded people that attempt to raise awareness and take action to protect our environment.
D. interdisciplinary subject used to gain knowledge about the environment.
If the density of water is 1.0 g/mL, what is the mass of 2.0 L of water?
Answer:
Density=1.0 g/mL
Volume=2.0 L
Mass=?
Density=mass/volume
Mass=density*volume
Mass=1.0*2.0
Mass=2g
Which of the examples represent potential energy A candy bar Wind A stretched rubber band Rowing a boat A ball rollinv down a hill A roller coaster at the top of a hill
Answer:
A candy bar
A stretched rubber band
A roller coaster at the top of a hill
Explanation:
Potential energy is the energy present as a result of the position of an object. This energy depicts zero motion or movement unlike kinetic energy.
A candy bar, stretched rubber band and roller coaster at the top of a hill all indicate positions without any said explanation of movement.
The other option choices depicts a type of movement .This is why the three option choices are correct in this scenario.
The examples that represent potential energy are:
A. A candy bar
B. A stretched rubber band
D. A roller coaster at the top of a hill
What is Potential energy?It is the stored energy in any object or system by virtue of its position or arrangement of parts. This energy depicts zero motion or movement unlike kinetic energy. For example : A candy bar, stretched rubber band and roller coaster at the top of a hill all indicate positions without any said explanation of movement.
Thus, correct options are A, B and D.
Find more information about Potential energy here:
brainly.com/question/24933254
Write and balance this equation. Solid iron reacts with fluorine gas to produce crystalline iron(III) fluoride.
Answer:
iron+flourine.............iron flouride
Fe+F2.............FeF3
the above reaction is not balanced
now to balance this reaction
2Fe+3F2...........2FeF3
now this reaction is balanced
The balanced equation is: 2Fe + 3F2 ⇒ 2FeF3
How to balance an equation?A chemical equation needs to be balanced if you want to make the wide variety of the atoms of the reactants equal to the variety of the atoms of the goods.
Given,
Iron + fluorine ⇒ Iron Flouride
Fe + F2 ⇒ FeF3
Now to balance this reaction:
2Fe + 3F2 ⇒ 2FeF3
This reaction is balanced.
What is iron fluoride used for?
This medicine is a mixture manufactured from nutrients, iron, and fluoride. it's miles utilized in infants and youngsters to deal with or prevent deficiency because of terrible weight loss programs or low tiers of fluoride in drinking water and other sources.
Learn more about iron fluoride here: brainly.com/question/24072912
#SPJ2
What should you always do at the end of a lab
Answer:clean up the area
Explanation:
You are stranded on survivor island in which there are already 375 other survivors. For every survivor there are two hands, for every hand there is an eye; for every eye, there is a footprint; and for every 4 footprints, there is a dinosaur; for every half dinosaur, there are40 ducks; for every 20 ducks, there are 32 pineapples; for every 12 pineapples, there is 1 palm tree; for every 30 palm trees, there is 1 wave; for every wave, there are 100 anchors; and for every anchor, there are 30 turtles. How many turtles are on the island? Use dimensional analysis to solve this calculation.
Answer:
its in the answer
Explanation:
This beaker is filled with three liquids of different colors and densities. Which color substance is the most dense? How do you know
Answer:
the one at the bottom
Explanation:
the more dense an object is in this kind of demonstration (which is called a density tower btw) the lower it'd be so taking this reason into consideration the lowest would be the densest
How do the number of protons in an atom affect the atom's
identity?
Answer:
The number of protons in an atom define each individual element because the number of protons is the atomic number which is the defining property of an atom and never changes. The number of protons determines an atom's identity. For example, Oxygen has an atomic number of 8, so it has 8 protons, so no matter what ionic compound or molecule it's part of, every single Oxygen atom will always have 8 protons each.
1. Which number is more accurate if the correct number is 3.5. Is it 3.1, 3.3, 3.6, or 4.0?
Answer:
3.6
Explanation:
3.6 is only 0.1 away from 3.5
I hope this helped and plz give brainliest!
plz help meh, I think there is trick question!!!
Answer:
Explanation:
Atoms of each element contain a characteristic number of protons. In fact, the number of protons determines what atom we are looking at (all atoms with six protons are carbon atoms), the number of protons in an atom is called the atomic number. In contrast, the number of neutrons for a given element can vary.
I hope I helped you!
Answer:
Atoms of each element contain a characteristic number of protons. In fact, the number of protons determines what atom we are looking at (e.g., all atoms with six protons are carbon atoms); the number of protons in an atom is called the atomic number. In contrast, the number of neutrons for a given element can vary.
Explanation:
So i would say C
Carbondioxide gas is't collectable in water. why?
Answer:
carbon dioxide is a gas so it isn't collected over water.
Explanation:
it works for insoluble gases such as hydrogen,or gases that do not dissolve easily in water such as ammonia and chlorine are readily soluble in water and are not collected this way.
hope it is helpful for you.
A single paper clip weighs about one gram. So 10 paper clips would weigh?
which statement best describes what happens when you hold a cold drink in your hand?
Answer:
heat will flow from your hand (the warmer object) to the cup (the colder object), and your hands will start to feel cold because their losing heat energy
Testing a hypothesis is
Answer:
State the hypotheses. Every hypothesis test requires the analyst to state a null hypothesis and an alternative hypothesis. Formulate an analysis plan. The analysis plan describes how to use sample data to accept or reject the null hypothesis. Analyze sample data. Interpret the results.
Explanation:
Answer:
Your hypothesis is what your guess is for an answer and testing would be to test your hypothesis to see if its right
Explanation:
What is mass in grams of 300 ml of salt water with a density of 1.30 grams per centimeter cubed
Answer:
The answer is
390 gExplanation:
The mass of a substance given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
Density = 1.30 g/cm³
volume = 300 mL
Substitute the values into the above formula and solve
That's
mass = 1.3 × 300
We have the final answer as
390 gHope this helps you
Physical and chemical properties
Answer:
Chemical properties
-It is not reverseable
-Change in energy is seen
-It is permanent change
-The change take place in both physical and chemical properties of matter
Physical properties
-The change takes place only in physical property of matter
-It can be reversed back
-It is temporary change
-Change in energy is not seen