Answer:
All forms of energy are either kinetic or potential. The energy associated with motion is called kinetic energy . The energy associated with position is called potential energy . Potential energy is not "stored energy".
Explanation:
what does terminal velocity mean ? please help
[tex] \underline{ \bf{\underline{\large{Terminal \: Velocity}}}}[/tex]
The maximum constant velocity acquired by a body while falling through a viscous medium is called it's terminal velocity. It is usually denoted by [tex] \sf V_T [/tex].It is directly proportional to the square of the radius of the body (a²) & the difference of the densities of the body and the fluid [tex] \sf (\rho - \sigma) [/tex].It is inversely proportional to the viscosity of the medium [tex] \sf (\eta) [/tex].Formula of Terminal Velocity:[tex] \boxed{ \bf{V_T = \dfrac{2}{9} \dfrac{ {a}^{2} }{ \eta} ( \rho - \sigma)g}}[/tex]400 N of load can be overcome by an effort of 50 N by using a lever. Calculate the mechanical advantage of the lever.
Answer:
load (l)=400N
Effort(E)=50N
mechanical advantage (MA)= load ÷Effort
(ma)=400÷50
(ma)=8
Explanation:
I copy pasted from the answer from the same question. Remember to first check if ur question is there
NEED HELP IS THERE SOMEONE CAN HELP ME PLS :)
A 30 kg object has a frictional force of 60 N. It's coefficient of friction must be...?
A) 0.2
B) 2
C) .002
D) 20
mass = 30kg
frictional force = coefficient of friction * (mass * g)
g = 9.8 m/s^2
So:
60N = x * 294 N
x = 60 N / 294 N = 0,2
Jen had an average speed of 2.5 m/s when hopping on one foot. If she hopped for 5.0 seconds, for what distance was she hopping?
Explanation:
distance
speed =_________
time
distance = speed × time
= 2.5 × 5.0
distance = 12.5 m
Crushing, stirring, heating are all methods to increase the rate of ______________ a solute in a solvent.
Answer: mixing
Explanation:
What two things must you know to describe the motion of an object? __________________________________________________________________________
Distance is _________________________________________________________________
What is the displacement of a cyclist, who travels 1 mile north, then 1 mile east, and finally 1 mile south? ___________________________
Define speed ________________________________________________________________
How do speed and velocity differ? ______________________________________________
__________________________________________________________________________
How do velocities combine? In opposite directions? ________________________________ In the same direction? ________________________________________________________
A river flows at a velocity of 3 km/h relative to the riverbank. A boat moves upstream at a velocity of 15 km/h relative to the river. What is the velocity of the boat relative to the riverbank? ___________________________________
The rate at which velocity changes is called ________________________
True or false? Acceleration is the result of increases or decreases in speed.
A horse on a carousel that is moving at a constant speed is accelerating because _________________________________________________________________________
True or false? When the final velocity is less than the initial velocity of an object, the acceleration is negative.
The total distance traveled divided by the total time is _______________________
What are some common units for speed (give at least two) _____________ ___________
Define velocity ____________________________________________________________
Define acceleration _________________________________________________________
A quantity that has both magnitude and direction is called a _________________.
WILL MARK BRAINLIEST PLEASE HELP DUE IN 2 MINS
On a distance-time graph speed is a ____________ line and thus a ____________ graph.
On a distance-time graph acceleration is a ___________ line and thus a _______________ graph.
Answer:
velocity is vector Quantity
When the energy of a wave increases, what happens to the amplitude?
Answer:
The energy transported by a wave is directly proportional to the square of the amplitude. So whatever change occurs in the amplitude, the square of that effect impacts the energy. This means that a doubling of the amplitude results in a quadrupling of the energy.
Explanation:
When the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.
What is the amplitude of a wave?The amplitude of a wave may be defined as the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path.
It is the principle of physics that when the amplitude of the wave is higher, the energy also gets higher. To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.
Therefore, when the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.
To learn more about Energy and amplitude, refer to the link:
https://brainly.com/question/19036728
#SPJ6
43
Select the correct answer.
According to the law of reflection, what is the relationship between the angle of incidence and the angle of reflection?
OA. The angle of reflection is twice the angle of incidence.
OB.
The angle of reflection is half the angle of incidence.
OC. The angle of reflection is equal to the angle of incidence.
OD. The angle of reflection is independent of the angle of incidence.
ОЕ.
The angle of reflection is always perpendicular to the angle of reflection.
Reset
Next
Answer is c, they are equal:
Explanation:
Explain how bar graphs can show comparisons between 2 topics.
Answer:
A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
Explanation:
A bar chart also known as a bar graph can be defined as the graphical representation of data (informations) by using vertical columns or rectangular bars. When a data set is observed, a bar chart can be used to graphically represent or record the total or overall amount of information contained therein. Generally, bar charts are used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
The bar graph has a x-axis and a y-axis used to represent the various categories of data collected.
In this scenario, the x-axis is used to denote the points earned by the teams while the y-axis is used to denote the seasons as seen in the image attached.
Hence, point scores by team (Team A, B and C) per seasons (2002, 2003, 2004 and 2005) can best be compared through the use of a bar chart (graph).
Answer:
Answer above is correct i only put this:
Explanation:
A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
Sometimes, I have to take my cat, Gigi, in the car. She doesn’t like this, and tends to hide under the couch when she knows she has to go. This means I have to drag her out. Assuming she is using her claws to try and stop me, identify the forces acting on Gigi, and draw a free body diagram for the situation. Make sure you label each force and identify where it’s coming from.
Answer:
F - fr = ma , N - W = 0
Explanation:
In this exercise we are asked to identify the forces that act on the jack, for this we will use Newton's second law
On the x axis
We have two forces: the friction and the force of the girl who pulls the cat
F - fr = ma
On the y axis
There are two forces: normal and weight
N - W = 0
A diagram of these forces can be seen in the attachment
The space shuttle design team spent two years working with sketches and models before building the shuttle. Why were these steps important?
1.Sketches and models allowed for the design to be modified before investing huge amounts of time and money to build the actual shuttle.
2.Sketches and models allowed for many different astronauts to provide input on the design of the shuttle before investing money in the actual shuttle.
3.Sketches and models helped astronauts in their training program as they prepared for their missions.
Answer:
sketches and models helped astronauts in their training program as they prepare for their missions
A satellite was in two separate crashes. In both crashes, the satellite had the same mass. Engineers want to know about the speed and direction of the satellite after the crashes. Why would the crash affect the motion of the satellite, and which crash caused a greater change in motion for the satellite?
Answer & Explanation:
Crashing into the asteroid would cause the satellite to slow down, stop, or reverse direction, because it is a force in the opposite direction to the satellite's motion. Whichever crash was a stronger force would cause it to change motion more. It takes a stronger force to change the velocity of a more massive object.
1. In your own words explain what happens at a subduction zone. 2. In your own words explain what happens at a mid-ocean ridge. 3. At a subduction zone what causes magma to rise?
Answer:
1. The subduction zone serves as the meeting point for two tectonic plates.
2. At the Mid- Ocean ridge, decompression melting occurs.
3 What causes the magma to rise is the increase in pressure caused by collection of gases by the magma.
Explanation:
Subduction zone is define as a zone where tectonic plates ( an oceanic plate slides beneath a continental plate) meets and contributes to the rise of magma to the surface in geological sciences.
At the Mid - Oceanic ridge, decompression melting occurs. As mantle ascends beneath the mid-ocean ridge, less and less rock lies above it, so large pressure changes occur, which leads to melting. The melt is less dense than the solid, and rises to the surface to form the oceanic crust.
At the subduction zone the magma that is formed is usually made up of silica rich lava. Thick silica rich magma does not release the gasses very easily so they build up inside the magma chamber. As the gasses collect in the chamber, the pressure rises. It is possible for the pressure to rise so much that the chamber cannot contain the magma and it erupts explosively.
Annie has 100 mL of honey. The honey has a mass of 145 g. What is the density of the honey?
Answer:
The answer is 1.45 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{145}{100} \\ [/tex]
We have the final answer as
1.45 g/mLHope this helps you
Which TWO correctly relate the attraction between the particles of a liquid and the temperature at which the liquid changes state?
A. Strong attractions mean the liquid melts at a higher temperature
B. Strong attractions mean the liquid melts at a lower temperature
C. Strong attractions mean the liquid boils at a higher temperature
D. Strong attractions mean the liquid boils at a lower temperature
Answer:
a &c
Explanation:
>3
Attraction between the molecules of a liquid and the temperature at which the liquid changes state is "Strong attractions mean the liquid boils at a higher temperature". The correct option is C
What is Temperature ?Temperature is a physical quantity which measures hotness and coldness of a body. Temperature measures the degree of vibration of molecule in a body. Temperature is measured in centigrade (°C), Fahrenheit (°F) and Kelvin (K) in which Kelvin (K) is a SI unit of temperature. Absolute scale of temperature means Kelvin scale of temperature.
relation between Kelvin(K) and centigrade (°C),
°C= K - 273.15
from equation, 273.15 K means 0 °C, which is freezing point of water (ice).
when we give temperature to the body, its molecule or atom absorbs thermal energy and vibrate about their mean position. Amplitude of vibration get increases as we go on increasing temperature and for higher temperature force of attraction between molecules gets weaker. Hence for higher temperature, due to weaken the force of attraction between molecule, solid goes into liquid state. and further increase in temperature liquid goes into gaseous state.
Liquid has stronger force of attraction than gas and weaker than solid. Strong force of attraction means high temperature should be given to break molecular bonds. Therefore Strong attractions mean the liquid boils at a higher temperature.
Hence option C is correct.
To know more about force of attraction, click :
https://brainly.com/question/6958773
#SPJ3
A fire is burning in a fireplace. Where is the radiation?
A. You touch warm bricks next to the fireplace
B. You can feel the heat from across the room
C. Heat is rising up from the chimney
A rock falls off a cliff that is 82 m high. How fast is the rock moving when it hits the ground?
Answer:
40.1m/s
Explanation:
This is a kinematics problem
x = 82m
a = -9.8m/s^2
v(initial) = 0
Find: v(final)
Using kinematics equation:
vf^2 = vi^2 + 2a(delta)x
vf^2 = 0 + 2*(-9.8)*(82)
vf = sqrt(1607.2) = 40.09m/s
The is traveling with a velocity of 40.1m/s when it hits the ground.
please help!!! give me a summary on why human population is either good or bad!! thank youu
Plyometrics can help a person maintain cardiorespiratory fitness. Please select the best answer from the choices provided. T F
Answer: IT IS TRUE
Explanation:
Hope this helps
Plyometrics can help a person maintain cardiorespiratory fitness T
It is TRUE that plyometrics can help a person maintain cardiorespiratory fitness
PlyometricsPlyometrics is a type of exercise training that works with the principle of using speed and force of different movements to build muscle power.
Plyometrics include different types of exercises such as pushups, throwing, running, jumping, and kicking.
Learn more about plypmetrics:
https://brainly.com/question/1526420
pls help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
the last answer is correct.
Explanation:
If one team pulls with more force than the middle flag or marker will move
find acceleration of block and tension in strings if m1 =8kg m2= 4kg and take g=10m/s²
[tex]\sf{m_1}[/tex] = 8kg
[tex]\sf{m_2}[/tex] = 4kg
g = 10m/s²
[tex]\large\bold{\underline{\underline{To \: Find:-}}}[/tex]→Acceleration of block
→Tension in strings
[tex]\large\bold{\underline{\underline{Solution:-}}}[/tex]Let, the two equation will be ,
[tex]\leadsto[/tex] 8g - T = 8a ..... Equation no (1)
[tex]\leadsto[/tex] T - 4g = 4a ..... Equation no (2)
Putting the value of equation no (1) and (2) we get,
[tex]\implies[/tex] 4g = 12a
[tex]\implies[/tex] 4 × 10 = 12a
[tex]\implies[/tex] 40 = 12a
[tex]\implies[/tex] a = [tex]\sf\dfrac{\cancel{40}}{\cancel{12}}[/tex]
[tex]\dashrightarrow[/tex] a = [tex]\dfrac{10}{3}[/tex]
Again, we have to putting the value of a in the equation no (2) we get,
[tex]\implies[/tex] T - 4g = 4 × [tex]\dfrac{10}{3}[/tex]
[tex]\implies[/tex] T - 4 × 10 = 4 × [tex]\dfrac{10}{3}[/tex]
[tex]\implies[/tex] T - 40 = [tex]\dfrac{40}{3}[/tex]
[tex]\implies[/tex] T = [tex]\dfrac{40}{3}[/tex] + 40
[tex]\implies[/tex] T = [tex]\dfrac{40 + 120}{3}[/tex]
[tex]\dashrightarrow[/tex] T = [tex]\dfrac{160}{3}[/tex] N
[tex]\therefore[/tex] Acceleration of block = [tex]\dfrac{10}{3}[/tex] m/s².
And, Tension in strings = [tex]\dfrac{160}{3}[/tex] N
hey pls help with this HDJSJDH im rlly bad at this kinda stuff :,) i'll mark the correct answer brainliest
Answer:
A. Cue, White Ball, Blue Ball
Explanation:
Visualize in which order things are being hit
Radio stations broadcast signals on two different frequency bands. These are called
Answer:
AM(amplitude modulation) and FM(frequency modulation)
Explanation:
A radio frequency band is a small adjacent section of the radio spectrum frequencies, whereby channels are usually used or set aside to be used.
They are usually of two different bands called AM which is known as amplitude modulation and FM which is known as frequency modulation
to calculatw the power produced by a force, the size of the force must be known. What else needs to be known to calculate the power
-- The distance the force moved through
-- How long the force lasted
The other thing we need to calculate the power is the "Velocity".
A quantity of labor or work done to be accomplished within a particular period of timeframe is determined as power. It is denoted by "P".According to the given query, we are talking about the relation between Power and Force. Along with simple instances where such an item is moved at continuous speed by a constant force.
The relation can be shown as:
→ [tex]P= Fv[/tex]
where,
P = PowerF = Forcev = VelocityThus the above is the right response.
Learn more about Power here:
https://brainly.com/question/11380506