Answer:If the masses are different, the lighter ice skater will accelerate faster than the ice skater with more mass.
Explanation:
The lighter skater will accelerate more quickly than the heavier skater if there are mass discrepancies.
used an idea?According to Newton's third law, the action and reaction forces in any force interaction must be equal and moving in the opposite directions. These pressures, nevertheless, affect a variety of items. In this case, each skater will experience the same amount of force, and if any other horizontal forces, such as friction, operating on each skater in the opposite direction from the pushing force are less than the pushing force, each will accelerate in that direction. The two skater system's center of mass will remain where it is if there is little to no friction to prevent the skaters from moving.
To know more about Friction visit-
https://brainly.com/question/13000653
#SPJ2
When your blood pressure is low, choose a choice below that explains what occurs.
A. The nervous system signals smooth muscles in the blood vessels to relax to decrease blood pressure.
B. The nervous signals smooth muscles in the blood vessels to relax to increase blood pressure.
C. The nervous system signals smooth muscles to contract to decrease blood pressure.
D. The nervous system signals smooth muscles in the blood vessels to contract to increase blood pressure
Answer:
The correct option is;
D. The nervous system signals smooth muscles in the blood vessels to contract to increase blood pressure
Explanation:
The contraction or relaxation of the vascular smooth muscles lead to the blood vessel volume change and blood pressure change such that the blood is redirected to regions of the body that requires instantaneous increased oxygen intake. As such the nervous system signals the blood vessel's vascular smooth muscle to contract, through vasoconstriction so as to raise the blood pressure, when the blood pressure is low.
how far will a 600 kg boat travel in 12 s if there is a constant 900 N force on it and it starts from rest?
Answer:
Distance, S = 108 meters.
Explanation:
Force is given by the multiplication of mass and acceleration.
Mathematically, Force is;
[tex] F = ma[/tex] ............equation 1
Where;
F represents force measured in Newton. m represents the mass of an object measured in kilograms. a represents acceleration measured in meters per seconds square.Given the following data;
Since the boat is starting from rest, initial velocity, u = 0
Mass, m = 600kg
Time, t = 12s
Force, F = 900N
Substituting into equation 1, we have;
[tex] 900 = 600*a[/tex]
[tex]a = \frac{900}{600}[/tex]
Acceleration, a = 1.5 m/s²
T
To solve for distance, we would use the second equation of motion;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Substituting the values into the equation, we have;
[tex] S = 0(12) + \frac {1}{2}*1.5* 12^{2}[/tex]
[tex] S = 0 + 0.75* 144[/tex]
Distance, S = 108m
Therefore, the distance covered by the boat is 108 meters.
During a spacewalks an astronaut lets go of a tool, causing it to float away and bounce off the side of the space shuttle. The astronaut saw
the the tool hit the shuttle but did not hear it hit the shuttle. Why would the astronaut be able to see the tool hit the shuttle but not hear it
hit the shuttle?
FISH
Answer:
In space noone can hear you scream.....
Explanation:
There is no sound in space. Sound, like light or heat, is a wave. However, one major distinction is that, unlike light or heat (radiation), sound needs a medium to travel. Sounds require the presence of molecules or particles to travel from one region to another.
Igneous rock can be changed into which type of rock through the application of heat and pressure?
metamorphic rock
clastic sedimentary rock
non-foliated igneous rock
foliated igneous rock
Answer:
metamorphic rock
Explanation:
Igneous rocks can be changed into metamorphic rocks when heat and pressure are applied to the rock.
Pressure and heat in the presence of a fluid phase cause metamorphic transformation of a prolith.
At the right temperature and pressure, an igneous rock will not form magma but will undergo mineralogical changes to form metamorphic rocks. These changed rocks have different mineral facies that are different from those of the prolith.Through heat and pressure, igneous rocks can be transformed into metamorphic rocks.
Answer:
classic sedimentary rock
Explanation:
What is the momentum of a 950 kg car moving at 10.0 m/s?
9.5 kgm/s
95 kgm/s
9500 kgm/s
95000 kgm/s
Answer:
The answer is 9500 kgm/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocityFrom the question
mass = 950 kg
velocity = 10.0 m/s
We have
momentum = 950 × 10
We have the final answer as
9500 kgm/sHope this helps you
If a rock is skipped into a lake at 24 m/s2 with what force as the rock
thrown if it was '1,75 kg?
Answer:
Force = Mass * Acceleration
Explanation:
24*1.74= 42 N
Geologists measure the amplitude of seismic waves using the Richter scale. If an earthquake of 7.3 has a greater amplitude than an earthquake of 4.4, which one carries more energy? Explain your answer.
Answer: The 7.3 earthquake carries more energy
Explanation:
Because, it has a higher amplitude
What is the pH of 0.001 M HNO3?
Answer:
i think its 2.0
Explanation:
hopefully i am right ...
I took a picture of my problem.
Write a short story where the main character needs protection from two different EM radiations
1300 J of work are done when a rock is pushed 40 m. How much force was used?
Explanation:
Work=ForcexDisplacement
Force= Work/Displacement
= 1300/40
= 32.5 N
how does a meteor transfer energy?
Answer:
Hope this answered your question!~ (Sorry if you get it wrong or I got it wrong-)
Explanation:
When an impact event happens, the enormous kinetic energy of the asteroid or meteorite – a massive body travelling at high speed – is partly transferred to the Earth but largely converted into heat and sound, creating pressure waves travelling radially outwards from its centre, similar to that of an atom bomb.
~The Confuzzeled homan
At highway speeds, a particular car is capable of an acceleration of about 1.6 m/s?. At this rate,
does it take the car to speed up from 80 km/hr to 110 km/hr? Round your answer to
Two significant figures
Given parameters:
Acceleration of the car = 1.6m/s
Initial speed = 80km/hr
Final speed = 110km/hr
Solution:
Time taken to achieve this speed = ?
Solution:
Acceleration is the rate of change of velocity with the time taken.
Mathematically;
a = [tex]\frac{V - U}{T}[/tex]
where a is the acceleration
V is the final velocity
U is the initial velocity
T is the time taken
Now make the unknown time the subject of the expression;
aT = V - U
T = [tex]\frac{V - U}{a}[/tex]
Convert the given acceleration to km/hr;
1.6m/s = 1.6 x [tex]\frac{m}{s}[/tex] x [tex]\frac{1km}{1000m}[/tex] x [tex]\frac{3600s}{1hr}[/tex] = 5.76km/hr
Input the parameters and solve;
T = [tex]\frac{110 - 80}{5.76}[/tex] = 5.2hrs
The time taken is 5.2hrs
1. There is a group of kids playing tee ball in front of your house. If the bat is 5kg traveling with a velocity
of 8m/s, with what velocity will the 1.5 kg ball travel after it is hit by the bat?
Answer: tug vi
Explanation:
Because
This waterbottle has a mass of .5 kg. If the net force acting on the bottle is five and to the right what is the bottles acceleration (hint: use formula a=f/m
Answer:
a = 10/s^2
Explanation:
Answer:
a=10 m/s *2 right
Explanation:
The net force (0.5 kg) divided by the mass (5 N) = 10
The force moved the object to the right.
So you Would put this in the equation a=___ m/s *2 _____
And you would get a=10m/s*2 right
HOPE YOU LEARNED SOMETHING SO WHEN WE GO BACK TO SCHOOL YOU WILL KNOW WHAT YOU ARE TALKING ABOUT ! : )
The solar system revolves around the center of the Milky Way.
True or false
Answer:
yes
Explanation:
Answer: True
Im sure of it i took the test
Explanation:
A gas is compressed to 75cm3 to a volume of 30cm3. Its temperature remains the same The pressure of the gas after it has been compressed is 110 Pa. What was the pressure before it was compressed?
Given parameters:
Initial volume = 75cm³
New volume = 30cm³
New pressure = 110Pa
Unknown:
Initial pressure = ?
Solution:
Condition: temperature is constant
We simply apply Boyle's law to this problem:
" the volume of a fixed mass(mole) of a gas varies inversely as the pressure changes if the temperature is constant".
Mathematically;
P₁ V₁ = P₂ V₂
where P and V are pressure and volume values
1 and 2 are the initial and final states.
Input the parameters and solve for P₁;
P₁ x 75 = 110 x 30
P₁ = 44Pa
The initial pressure is 44Pa
HELP ASAP! Will make BRAINLEST
Which two options are reasons that electromagnetic waves can be used effectively in communication devices?
A. The speed at which they carry information can be varied.
B. They require no wires to carry information
C. Any type of electromagnetic wave can be used for communication.
D. They can travel through either air or other types of matter.
Answer:
B and D
Explanation:
Did the quiz
Electromagnetic waves require no wires to carry information and can travel through either air or other types of matter. Therefore, options (B) and (D) are correct.
What are electromagnetic waves?Electromagnetic radiations are produced when an electric field comes in contact with the magnetic field. Electromagnetic waves are the composition of oscillating electric as well as magnetic fields.
Infrared radiation is used in security cameras and used for night vision. UV rays are useful to detect forged banknotes as the real banknotes don’t turn fluorescent under UV light.
Electromagnetic radiation can travel energy in a vacuum or air. Electromagnetic waves play a vital role in today's communication technology. Electromagnetic waves are specially used in RADARS to detect aircraft in the earth's atmosphere.
Radio waves, microwaves, infrared (IR), and visible light can be used for communication. Radio waves are used to transmit information on television and radio programs. Microwaves are used to transmit satellites, mobile phones, and television.
Learn more about the electromagnetic wave, here:
https://brainly.com/question/3001269
#SPJ5
What are three ways less gravity changes the human body
What forces cause acceleration?
Answer:
friction, should be correct i think!
The stage of respiration that releases most of the energy in glucose occurs in the ______.
A soccer player runs 80 yards down the field and then 30 yards back toward her
original starting point. This takes 55 seconds total. What is the average velocity of
the soccer player?
0.50 yd/s
0.91 yd/s
1.10 yd/s
2.00 yd/s
While Juliet was watching Romeo ran at a speed of 3.3 m/s straight off the end of a diving board
that is 3 m above the water. How long was he airborne before he hit the water?
HEY CAN ANYONE PLS ANSWER DIS!!!!!!
Answer:
Explanation:
1.wrap bar magnet in a plastic baggie and remove the iron filings from the mixture by using a bar magnet. Place a small piece of scrap paper on the scale and “tare” the scale. Then place filings on the scrap paper and record (e) the mass of the iron filings. Don't throw out the iron–save it to be recollected.
2.When sand is added to water it either hangs in the water or forms a layer at the bottom of the container. Sand therefore does not dissolve in water and is insoluble. It is easy to separate sand and water by filtering the mixture. Salt can be separated from a solution through evaporation.
3.Sand (mostly silicon dioxide) is not.
Pour the salt and sand mixture into a pan.
Add water. ...
Heat the water until the salt dissolves. ...
Remove the pan from heat and allow it to cool until it's safe to handle.
Pour the salt water into a separate container.
Now collect the sand.
Pour the salt water back into the empty pan.
Heat the salt water until the water boils. Continue boiling it until the water is gone and you're left with the salt.
Another way you can separate the salt water and sand is to stir up the sand/salt water and pour it through a coffee filter to capture the sand.
Answer:
1. Separating iron from mixture
Provided a magnetmoved the magnet close to the mixtureseparated the magneted iron from the magnet.2. Separating sand from mixture
poured the mixture in a separation funnelfiltered off the sand from the mixture.3. Separating Salt mixture
boild the mixturecontinued heating to drynessthe remimants left behind is the saltPlease this question
Answer:
1. 7
2. Mass
3. (b) Distance
4. (b) Force
5. (a) ML⁻¹T⁻²
6. (c) M⁻¹LT²
7. (c) M⁻¹L³T⁻²
8. (c) Pressure
9. (c) Young's modulus
10. (b) zero
11. (c) Infinite
12. (d) 1:4
13. (b) 0.6 J
14. (c) 45 N
15. (a) 0.4 cc
16. (a) 176.7 °F
17. (a) 10°C
18. (c) 50 K
19. b. H
Explanation:
15. Whereby the compressibility = 4 × 10⁻⁵ Pa⁻¹
The compression ratio for 100 Pa = 4 × 10⁻⁵ × 100 = 4 × 10⁻³
The Change for 100 cc = 4 × 10⁻³ × 100 cc = 0.4cc
Help me!
What is the net force acting on a 7.85 kg object moving at a constant speed of 15.55 m/s
Which statement describes an endothermic reaction? A. Energy is released by the reaction. B. Energy is absorbed by the reaction. C. No energy is transfered by the reaction. D. Energy is created in the reaction.
Answer:It's B energy is absorbed by the reaction,hope this helps
Explanation:
Any reaction in which energy is absorbed is said to be endothermic. Hence, option B is correct, but the rest are not correct.
What is an Endothermic Reaction?In every chemical process, energy is involved. When new bonds form in products, energy is produced. Reactant bonds are broken using energy. Exothermic reactions are those that produce more energy when new bonds form in the products than is needed to break existing bonds in the reactants.
In contrast, endothermic reactions are the opposite. Endothermic reactions release more energy when new bonds form in the products than is required to break bonds in the reactants.
During the reaction, a large amount of energy is absorbed.
To get more information about Endothermic Reaction :
https://brainly.com/question/23184814
#SPJ5
A water-balloon launcher with a mass of 2.0 kg is suspended on a wire. It
fires a 0.75 kg balloon to the west at a velocity of 14.0 m/s. What is the
resulting velocity of the launcher if the net force on the launcher is equal to
the reaction force?
A. 5.3 m/s east
B. 6.6 m/s west
C. 7.4 m/s east
D. 37.3 m/s east
Answer:
5.3
Explanation:
Answer:
5.3 m/s east
Explanation:
Consider a spring that does not obey Hooke's law very faithfully. One end of the spring is fixed. To keep the spring stretched or compressed an amount x, a force along the x-axis with x-component Fx=kx−bx2+cx3 must be applied to the free end. Here k=100N/m, b=700N/m2, and c=12000N/m3. Note that x>0 when the spring is stretched and x<0 when it is compressed.
Answer:
The work done will be 0.115 J.
Explanation:
Given that,
[tex]k=100\ N/m[/tex]
[tex]b=700\ N/m^2[/tex]
[tex]c=12000\ N/m^3[/tex]
A force along the x-axis with x-component,
[tex]F(x)=kx-bx^2+cx^3[/tex]
Suppose, How much work must be done to stretch this spring by 0.050 m from its unstretched length?
We need to calculate the work done
Using formula of work done
[tex]W(x)=\int{F(x)dx}[/tex]
Put the value into the formula
[tex]W(x)=\int{(kx-bx^2+cx^3)dx}[/tex]
[tex]W(x)=\dfrac{kx^2}{2}-\dfrac{bx^3}{3}+\dfrac{cx^4}{4}[/tex]
Put the value of k,b,c and x
[tex]W(0.050)=\dfrac{100\times(0.050)^2}{2}-\dfrac{700\times(0.050)^3}{3}+\dfrac{12000\times(0.050)^4}{4}[/tex]
[tex]W(0.050)=0.115\ J[/tex]
Hence, The work done will be 0.115 J.
The value of spring displacement is greater than zero. Therefore, spring is stretched.
Force in spring :
It is given as, [tex]F=kx[/tex]
Where k is constant and x is amount of displacement.
The force function is given that,
[tex]F(x)=kx-bx^{2}+cx^{3}[/tex]
Here given that, [tex]k=100N/m, b=700N/m^{2} , c=12000N/m^{3} .[/tex]
Substitute all values in above equation,
[tex]F(x)=100x-700x^{2} +12000x^{3}[/tex]
To check, the spring is stretched or it is compressed.
Substitute f(x) = 0
We get x is greater than zero.
Thus, The value of spring displacement is greater than zero. Therefore, spring is stretched.
Learn more about the spring force here:
https://brainly.com/question/14970750
A stone has a mass of 2kg and volume of 0.00025m3, what is the density of the stone?
Answer:
density = [tex]\frac{mass}{volume}[/tex]
so,
d = 2/0.00025
d = 8000 kg/m3