To understand the decibel scale. The decibel scale is a logarithmic scale for measuring the sound intensity level. Because the decibel scale is logarithmic, it changes by an additive constant when the intensity as measured in W/m2 changes by a multiplicative factor. The number of decibels increases by 10 for a factor of 10 increase in intensity. The general formula for the sound intensity level, in decibels, corresponding to intensity I is

Answers

Answer 1

The question is incomplete. Here is the complete question.

To understand the decibel scale. The decibel scale is a logarithmic scale for measuring the sound intensity level. Because the decibel scale is logarithmic, it changes by an additive constant when the intensity when the intensity as measured in W/m² changes by a multiplicative factor. The number of decibels increase by 10 for a factor of 10 increase in intensity. The general formula for the sound intensity level, in decibels, corresponding to intensity I is

[tex]\beta=10log(\frac{I}{I_{0}} )dB[/tex],

where [tex]I_{0}[/tex] is a reference intensity. for sound waves, [tex]I_{0}[/tex] is taken to be [tex]10^{-12} W/m^{2}[/tex]. Note that log refers to the logarithm to the base 10.

Part A: What is the sound intensity level β, in decibels, of a sound wave whose intensity is 10 times the reference intensity, i.e. [tex]I=10I_{0}[/tex]? Express the sound intensity numerically to the nearest integer.

Part B: What is the sound intensity level β, in decibels, of a sound wave whose intensity is 100 times the reference intensity, i.e. [tex]I=100I_{0}[/tex]? Express the sound intensity numerically to the nearest integer.

Part C: Calculate the change in decibels ([tex]\Delta \beta_{2},\Delta \beta_{4}[/tex] and [tex]\Delta \beta_{8}[/tex]) corresponding to f = 2, f = 4 and f = 8. Give your answer, separated by commas, to the nearest integer -- this will give an accuracy of 20%, which is good enough for sound.

Answer and Explanation: Using the formula for sound intensity level:

A) [tex]I=10I_{0}[/tex]

[tex]\beta=10log(\frac{10I_{0}}{I_{0}} )[/tex]

[tex]\beta=10log(10 )[/tex]

β = 10

The sound Intensity level with intensity 10x is 10dB.

B) [tex]I=100I_{0}[/tex]

[tex]\beta=10log(\frac{100I_{0}}{I_{0}} )[/tex]

[tex]\beta=10log(100)[/tex]

β = 20

With intensity 100x, level is 20dB.

C) To calculate the change, take the f to be the factor of increase:

For [tex]\Delta \beta_{2}[/tex]:

[tex]I=2I_{0}[/tex]

[tex]\beta=10log(\frac{2I_{0}}{I_{0}} )[/tex]

[tex]\beta=10log(2)[/tex]

β = 3

For [tex]\Delta \beta_{4}[/tex]:

[tex]I=4I_{0}[/tex]

[tex]\beta=10log(\frac{4I_{0}}{I_{0}} )[/tex]

[tex]\beta=10log(4)[/tex]

β = 6

For [tex]\Delta \beta_{8}[/tex]:

[tex]I=8I_{0}[/tex]

[tex]\beta=10log(\frac{8I_{0}}{I_{0}} )[/tex]

β = 9

Change is

[tex]\Delta \beta_{2},\Delta \beta_{4}[/tex], [tex]\Delta \beta_{8}[/tex] = 3,6,9 dB


Related Questions

A brick is lying on a table in a state of static equilibrium. If the mass of the brick is 7.52 kilograms, what is the normal force exerted by the table on the brick? A. -73.7 newtons B. 73.7 newtons C. 80.7 newtons D. 7.52 newtons E. 8.07 newtons

Answers

The answer is OPTION B : 73.7 N

Answer:

B

Explanation:

What is the net Force needed to get a 16 kg box moving 4 m/s^2?

Answers

Answer:

The net force should be of a magnitude of 64 N

Explanation:

We use Newton's second Law for this:

[tex]F_{net} = m\,*\,a[/tex]

which for our case gives:

[tex]F_{net} = m\,*\,a=16\,(4)\,N= 64\,\,N[/tex]

5. Why does a properly adjusted head restraint help prevent head and neck injuries to occupants in
rear-end collisions? Explain your answer in terms of the law of conservation of momentum.

Answers

Answer:

Have you tried google

Explanation:

Answer:

protect against whisplasg injuries

- When a mixture contains substances that are not evenly mixed, it is called?

Answers

Answer:  Heterogenous mixture

Explanation:

A heterogeneous mixture in which the components of the mixture are not evenly mixed or uniform, allowing one to identify the different constituents of each components and enable the mixture to be separated physically.

Examples of heterogeneous mixtures includes

-- sand and nails

---rice and beans

--- water and oil

Another type of mixture is the homogeneous mixture in which all the components are evenly mixed causing that each components cannot be visible with the eye and therefore separated chemically.

during which stage do you have sleepwalking and sleeptalking

A. stage 2
B. stage 4
C. REM
D. stage 1

Answers

Hello! I am not that good at these things but I think that the answer is A
I think it’s answer A or B but I think it’s B but I’m not sure tho :)

1. Looking at the planet vs. eccentricity table, which two planets have the greatest eccentricity?

Answers

Answer:

Pluto & Mercury

Explanation:

Pluto's eccentricity is 0.248

Mercury's eccentricity is 0.206

A hockey puck initially travelling to the right at 34 m/s. It moves for 7 before
coming to a stop. How far did it move in 7 seconds?
You can use kinematic equations

Answers

Answer:

[tex]x=119m[/tex]

Explanation:

Hello,

In this case, since the hockey puck was moving at 34 m/s and suddenly stopped (final velocity is zero) in 7 seconds, we can first compute the acceleration via:

[tex]a=\frac{v_f-v_o}{t}=\frac{0m/s-34m/s}{7s}\\ \\a=-4.86m/s^2[/tex]

In such a way, we can compute the displacement via:

[tex]x=\frac{v_f^2-v_o^2}{2a}\\ \\x=\frac{0^2-(34m/s)^2}{2*-4.86m/s^2}\\ \\x=119m[/tex]

Best regards.

where do plants get the energy they need for photosynthesis
(A) leaves
(B) the sun
(C) sugars
(D) water

Answers

they get their energy from photosynthesis, so the answer would be (B) the sun

A classroom is about 3 meters high, 20 meters wide and 30 meters long. If the density of air is 1.29 kg/m3, what is the mass of the air in the classroom?

Answers

Answer:

the mass of the air in the classroom = 2322 kg

Explanation:

given:

A classroom is about 3 meters high, 20 meters wide and 30 meters long.

If the density of air is 1.29 kg/m3

find:

what is the mass of the air in the classroom?

density = mass / volume

where mass (m) = 1.29 kg/m³

volume = 3m x 20m x 30m = 1800 m³

plugin values into the formula

  1.29 kg/m³   =        mass    

                             1800 m³

mass =  1.29 kg/m³  ( 1800 m³ )

mass = 2322 kg

therefore,

the mass of the air in the classroom = 2322 kg

If A classroom is about 3 meters high, 20 meters wide and 30 meters long. If the density of air is 1.29 kg/m3, then the mass of the air in the classroom is 2322Kg.

What is density??

Density is the ratio of mass to volume. it tells how much mass a body is having for its unit volume. for example egg yolk has 1027kg/m³ of density, means if we collect numbers of egg yolk and keep it in a container having volume 1 m³ then total amount of mass it is having will be 1027kg. Density is a scalar quantity. when we add egg yolk into the water, egg yolk has greater density than water( 997 kg/m³), because of higher density of egg yolk it contains higher mass in same volume as water. hence due to higher mass higher gravitational force is acting on the egg yolk therefore it goes down on the inside the water. water will float upon the egg yolk. same situation we have seen when we spread oil in the water. ( in that case water has higher density than oil. thats why oil floats on the water).

Given,

Height = 3 m

Width = 20 m

length= 30 m

Density of air = 1.29kg/m³

The  volume of the room = 3×20×30 m³

Volume V = 1800m³

By formula,

Density = Mass/Volume

1.29kg/m³ = Mass/1800m³

Mass of the air = 1.29×1800 = 2322 Kg

The mass of the air is classroom is 2322Kg.

To know more about density :

https://brainly.com/question/29775886

#SPJ2.

A box measures 3.12 ft in length, 0.0455 yd in width and 7.87 inches in height. Since volume can be found using length x width x height, find the volume in cubic centimeters. Now find the volume in gallons.

Answers

Explanation:

This problem is on units conversion

given the dimensions

3.12 ft in length,

0.0455 yd in width and

7.87 inches in height

we have to convert to cm first

3.12 ft to cm=

1 ft-------30.48cm

3.12--------x

x=95.09cm

0.0455 yd to cm

0.0455yd ft to cm=

1 yd-------91.44cm

0.0455--------x

x=4.16cm

7.87 in to cm

1 in-------2.54cm

7.87--------x

x=19.98cm

the volume is =95.09cm*4.16cm*19.98cm

volume= 7907.45cm^3

the volume in gallon is

1 cm^3------0.000264172gal

7907.45cm^3-------x

x=7907.45*0.000264172

x=2.088gallons

How many meters are in 5.0 cm?
500
0.050
0.0005
0.5

Answers

Explanation:

100cm=1m

5 cm= x

cross multiple

x=5/100

=0.05m

There are 0.05 meters in 5 cm. The correct option among the following is option (B).

In the metric system, a centimeter (cm) is a unit of length. It is one centimeter (1 cm = 0.01 m) in size. Small distances or measurements, such as the length, height, or width of items, are frequently measured in centimeters. Due to its practical size for many routine measurements, it is also frequently employed in scientific and mathematical computations.

In the International System of Units (SI), the meter serves as the base unit and is frequently used to measure lengths, heights, and other measurements. It serves as the basic building block for other metric units like centimeters (one meter equals one hundred centimeters) and kilometers (one kilometer equals one thousand meters).

So, to convert 5.0 cm to meters:

5.0 cm ÷ 100 = 0.05 m

Hence, 5.0 cm is equal to 0.05 meters. The correct option is (B).

To learn more about meters, here:

https://brainly.com/question/13187866

#SPJ4

A tugboat tows a ship at a constant velocity. The tow harness consists of a single tow cable attached to the tugboat at point A that splits at point B and attaches to the ship at points C and D. The two rope segments BC and BD angle away from the center of the ship at angles of ϕ = 26.0 ∘ and θ = 21.0 ∘, respectively. The tugboat pulls with a force of 1200 lb . What are the tensions TBC and TBD in the rope segments BC and BD?

Answers

Answer:

The tensions in [tex]T_{BC}[/tex] is approximately 4,934.2 lb and the tension in [tex]T_{BD}[/tex] is approximately  6,035.7 lb

Explanation:

The given information are;

The angle formed by the two rope segments are;

The angle, Φ, formed by rope segment BC with the line AB extended to the center (midpoint) of the ship = 26.0°

The angle, θ, formed by rope segment BD with the line AB extended to the center (midpoint) of the ship = 21.0°

Therefore, we have;

The tension in rope segment BC = [tex]T_{BC}[/tex]

The tension in rope segment BD = [tex]T_{BD}[/tex]

The tension in rope segment AB = [tex]T_{AB}[/tex] = Pulling force of tugboat = 1200 lb

By resolution of forces acting along the line A_F gives;

[tex]T_{BC}[/tex] × cos(26.0°) + [tex]T_{BD}[/tex] × cos(21.0°) = [tex]T_{AB}[/tex] = 1200 lb

[tex]T_{BC}[/tex] × cos(26.0°) + [tex]T_{BD}[/tex] × cos(21.0°) = 1200 lb............(1)

Similarly, we have for equilibrium, the sum of the forces acting perpendicular to tow cable = 0, therefore, we have;

[tex]T_{BC}[/tex] × sin(26.0°) + [tex]T_{BD}[/tex] × sin(21.0°) = 0...........................(2)

Which gives;

[tex]T_{BC}[/tex] × sin(26.0°) = - [tex]T_{BD}[/tex] × sin(21.0°)

[tex]T_{BC}[/tex] = - [tex]T_{BD}[/tex] × sin(21.0°)/(sin(26.0°))  ≈ - [tex]T_{BD}[/tex] × 0.8175

Substituting the value of, [tex]T_{BC}[/tex], in equation (1), gives;

- [tex]T_{BD}[/tex] × 0.8175 × cos(26.0°) + [tex]T_{BD}[/tex] × cos(21.0°) = 1200 lb

- [tex]T_{BD}[/tex] × 0.7348  + [tex]T_{BD}[/tex] ×0.9336 = 1200 lb

[tex]T_{BD}[/tex] ×0.1988 = 1200 lb

[tex]T_{BD}[/tex] ≈ 1200 lb/0.1988 = 6,035.6938 lb

[tex]T_{BD}[/tex] ≈ 6,035.6938 lb

[tex]T_{BC}[/tex] ≈ - [tex]T_{BD}[/tex] × 0.8175 = 6,035.6938 × 0.8175 = -4934.1733 lb

[tex]T_{BC}[/tex] ≈ -4934.1733 lb

From which we have;

The tensions in [tex]T_{BC}[/tex] ≈ -4934.2 lb and  [tex]T_{BD}[/tex] ≈ 6,035.7 lb.

A cyclist accelerates from rest to 8 m/s in 3 seconds. How far did the cycles travel in 3 seconds?​

Answers

Answer:

[tex] \boxed{\sf Distance \ travelled = 12 \ m} [/tex]

Given:

Initial speed (u) = 0 m/s (Accelerates from rest)

Final speed (v) = 8 m/s

Time taken (t) = 3 seconds

To Find:

Distance travelled by cyclist (s)

Explanation:

From equation of motion of object moving with uniform acceleration in straight line we have:

[tex] \boxed{ \bold{s = (\frac{v + u}{2} )t}}[/tex]

By substituting value of v, u & t in the equation we get:

[tex] \sf \implies s = ( \frac{8 + 0}{2} ) \times 3 \\ \\ \sf \implies s = \frac{8}{2} \times 3 \\ \\ \sf \implies s = 4 \times 3 \\ \\ \sf \implies s = 12 \: m[/tex]

[tex] \therefore[/tex]

Distance travelled by cyclist (s) = 12 m

Answer:

s(distance) =36m

Explanation:

u(initial velocity) =0 m/s

a =8 m/s^2

t=3s

s=ut+1/2at^2

s=1/2(8)(3)^2

s=1/2(8)(3)(3)

s=4(9)

s=36m

what type of organism does not use photosynthesis
(a) plants
(b) bacteria
(c) algae
(d) humans

Answers

Answer:

D) Humans

Explanation:

Photosynthesis is a useless ability without some way of exposing yourself to as much of the Sun's energy as possible. That requires a large surface area, relative to their volume. Plants achieve that with large, horizontal, light-capturing surfaces – leaves.

Which has the fastest wave speed, a high frequency sound or a low frequency sound?

Answers

Answer:

high frequent sound

Explanation:

because if its low than its slower.

seagull is flying at a rate of 20 miles per hour south, it encounters wind blowing 20 miles per hour north. What is the resultants

Answers

Answer:

the winds will make the bird stop

Explanation:

is basically 20 - 20

The mass of a string is 20 g and it has a length of 3.2 m. Assuming that the tension in the string is 2.5 N, what will be the wavelength of a travelling wave that is created by a sinusoidal excitation of this string with a frequency of 20 Hz. Provide the wavelength in units of m. Please note: You do not include the units in your answer. Just write in the number.

Answers

Answer:

The wavelength of the wave is 1 m

Explanation:

Given;

mass of the string, m = 20 g = 0.02 kg

length of the string, L = 3.2 m

tension on the string, T = 2.5 N

the frequency of the wave, f = 20 Hz

The velocity of the wave is given by;

[tex]v = \sqrt\frac{T}{\mu} {}[/tex]

where;

μ is mass per unit length = 0.02 kg / 3.2 m

μ = 6.25 x 10⁻³ kg/m

[tex]v = \sqrt{\frac{T}{\mu} } \\\\v = \sqrt{\frac{2.5}{6.25*10^{-3}} } \\\\v = 20 \ m/s[/tex]

The wavelength of the wave is given by;

λ = v / f

λ = (20 m/s )/ (20 Hz)

λ = 1 m

Therefore, the wavelength of the wave is 1 m

You are trying to get to class on time using the UCF Shuttle. You are later than usual getting to the stop and see the shuttle pulling away from the stop while you are still 3.9 m behind the bus stop. In 40.9 m you will reach a barrier and you must catch the shuttle before that point. The shuttle has a constant acceleration of 4.5 m/s2. What is the minimum velocity you have to run at to catch the bus before it reaches the barrier

Answers

Answer:

20.1 m/s

Explanation:

Since You are later than usual getting to the stop and see the shuttle pulling away from the stop while you are still 3.9 m behind the bus stop. And In 40.9 m you will reach a barrier and you must catch the shuttle before that point.

Given that the shuttle has a constant acceleration of 4.5 m/s2. 

The total distance to cover is:

Total distance = 40.9 + 3.9 = 44.8 m

Assuming you are starting from rest. Then initial velocity U = 0

Using the 3rd equation of motion to calculate the minimum velocity.

V^2 = U^2 + 2as

V^2 = 0 + 2 × 4.5 × 44.8

V^2 = 403.2

V = sqrt (403.2)

V = 20.1 m/s

Therefore, the minimum velocity you have to run at to catch the bus before it reaches the barrier is 20.1 m/s

what role do control groups play

Answers

Answer:

Control groups let the one who is expermenting compare  the effect of the varibles in the expermental group.

Explanation:

An automobile is driven on a straight road, and the distance traveled by the automobile after time t=0 is given by a quadratic function a where a(t) is measured in feet and t is measured in seconds for 0 <= t <= 12. Of the following, which gives the best estimate of the velocity of the automobile, in feet per second, at time t = 8 seconds?

a. s(8)
b. s(8)/8
c. s(12)- s(2)/ 12-2
d. s(9)- s(7)/9-7

Answers

Answer:

[tex]Velocity = \frac{s(8)}{8}[/tex]

Explanation:

Given

[tex]0 \leq t \leq 12[/tex]

Required

Determine the velocity when t = 8

This type of velocity is referred to as an instantaneous velocity.

In this case, it is calculated using

[tex]Velocity = \frac{Distance\ at\ 8 second}{t = 8}[/tex]

Given that s(t) models the distance;

s(8) = distance at 8 seconds

So;

[tex]Velocity = \frac{s(8)}{8}[/tex]

Option B answers the question

Aldis is swinging a ball tied to the end of a string over his head. Suddenly, the string breaks and the ball flies away. Arrow best represents the path the ball follows after the string breaks.

Answers

Answer:

Straight line in the direction of the tangential velocity the ball had at the moment the string broke

Explanation:

After the string breaks, the ball now disconnected from the centripetal force that was exerted via the string, continues its travel in a straight line in the direction of the tangential velocity it had at the moment the string broke.

Answer:

B

Explanation:

just took the test :)

What is Bill's average running speed?

Answers

Answer:

Hello!

Sorry you haven't put up an image of your question! Without it we can't answer your question!

Explanation:

Maybe put up another one and it'll be answered!

:D

Ricardo finds an online site about the gas laws. The site shows the equation below for Charles’s law. What change would correct the error on the site? “Charles’s law” should read “Gay-Lussac’s law,” which explains changes in volume and temperature. The symbol for T2 should be smaller than for T1 because if volume increases, then temperature should decrease. Each T should be replaced by a P in the equation because Charles’s law describes changes in volume and pressure. The volume should be divided by temperature on each side of the equation.

Answers

Answer:

D. The volume should be divided by temperature on each side of the equation.

Explanation:

Charles's Law is  [tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex].

Answer:

The volume should be divided by temperature on each side of the equation.

Explanation:

The Shinkansen (bullet train in Japan) makes a trip from Tokyo Station to Kyoto station in 2 hours and 14 min. The distance traveled is 460 km (to two significant figures). Determine the average velocity of the train in meters per second (m/s). [conversions: 1 km = 1000 m, 1 hr = 60 min, 1 min = 60 s] *

Answers

Answer:

v =  57.2 m/s

Explanation:

The average velocity of the train can be defined as the total distance covered by the train divided by the time taken by the train to cover that distance. Therefore, we will use the following formula to find the average velocity of the train:

v = s/t

where,

s = distance covered = 460 km = (460 km)(1000 m/1 km) = 4.6 x 10⁵ m

t = time taken to cover the distance = 2 h 14 min

Now, we convert it into minutes:

t = (2 h)(60 min/1 h) + 14 min

t = 120 min + 14 min = (134 min)(60 s/1 min)

t = 8040 s

Therefore, the value of velocity will be:

v = (4.6 x 10⁵ m)/8040 s

v =  57.2 m/s

The chilled water system for a 27-story building has a pump located at ground level. The lost head in a vertical riser from the pump to an equipment room on the twenty-seventhfloor is 40ftof water, and the pump produces 270ft of head. What is the pressure on the suction side of the pump for a pressure of 8 psig to exist in the riser on the twenty-fifth floor

Answers

This question is incomplete, the complete question is;

The chilled water system for a 27-story building has a pump located at ground level. The lost head in a vertical riser from the pump to an equipment room on the twenty-seventh floor is 40ft of water, and the pump produces 270ft of head. What is the pressure on the suction side of the pump for a pressure of 8 psig to exist in the riser on the twenty-fifth floor

Assume 12ft of elevation per floor

Answer: 48.68 psig

Explanation:

First  we calculate the elevation of the building

hb = 27 story * 12ft per floor/story

hb =  324 ft

given that the head lost in the vertical riser hL = 40 ft

now the delivery head required in the riser on he 27th floor;

hd = 8 psig *  (2.31 ft / 1 psig)

hd = 18.46 ft

Now calculate the suction head required by balancing the energy per unit weight of water, considering pump as the control volume

hp = (hb + hL + hd) - hs

hs = hb + hL + hd - hp

where hp is the head developed by the pump (270 ft)

hb is the elevation of the 27th floor of the building ( 324 ft)

hL is the head lost in the vertical riser ( 40 ft)

hd is the head required to exist in the riser on the 27th floor (18.46 ft)

so we substitute

hs = 324 ft + 40 ft + 18.46 ft - 270 ft

hs = 112.46

so 112.46ft * (1 psig / 2.31 ft)

= 48.68 psig

4. What is the velocity of an object that doesn't move?
It depends on the object b. it depends on the speed c. it depends on the height
O mis
help

Answers

Answer:

Acceleration /Speed

Explanation:

An objects Velocity can be determined by acceleration,

Please pay attention in your middle school class, speed and velocity quiz.

The overall length of a piccolo is 30.0 cm. The resonating air column is open at both ends. (a) Find the frequency of the lowest note a piccolo can sound. (Assume that the speed of sound in air is 343 m/s.) Hz (b) Opening holes in the side of a piccolo effectively shortens the length of the resonant column. Assume the highest note a piccolo can sound is 3 000 Hz. Find the distance between adjacent antinodes for this mode of vibration.

Answers

Answer:

(a)  the frequency of the lowest note the piccolo can sound is 571.7 Hz

(b) the distance between adjacent antinodes is 5.72 cm

Explanation:

(a)

Given;

length of piccolo, L = 30 cm = 0.3 m

the speed of sound in air is 343 m/s

The wavelength of a pipe open at both ends, for the first harmonic is given;

L = A → N + N → A

L = λ / 4 +  λ / 4

L = λ / 2

λ = 2L

λ = 2 x 0.3 = 0.6 m

The fundamental frequency (lowest frequency) is given  by;

f₀ = v / λ

f₀ = (343 / 0.6)

f₀ = 571.7 Hz

(b)

Given;

highest note, f = 3000 Hz

the distance between adjacent antinodes is given by;

[tex]d = \frac{v}{2f}\\\\ d = \frac{343}{2*3000}\\\\ d = 0.0572 \ m\\\\d = 5.72 \ cm[/tex]

An electron enters a region of uniform electric field with an initial velocity of 64 km/s in the same direction as the electric field, which has magnitude E = 48 N/C. (a) What is the speed of the electron 1.3 ns after entering this region? (b) How far does the electron travel during the 1.3 ns interval?

Answers

Answer:

1.) 11 km/s

2.) 9.03 × 10^-5 metres

Explanation:

Given that an electron enters a region of uniform electric field with an initial velocity of 64 km/s in the same direction as the electric field, which has magnitude E = 48 N/C.

Electron q = 1.6×10^-19 C

Electron mass = 9.11×10^-31 Kg

(a) What is the speed of the electron 1.3 ns after entering this region?

E = F/q

F = Eq

Ma = Eq

M × V/t = Eq

Substitute all the parameters into the formula

9.11×10^-31 × V/1.3×10^-9 = 48 × 1.6×10^-19

V = 7.68×10^-18 /7.0×10^-22

V = 10971.43 m/s

V = 11 Km/s approximately

(b) How far does the electron travel during the 1.3 ns interval?

The initial velocity U = 64 km/s

S = ut + 1/2at^2

S = 64000×1.3×10^-6 + 1/2 × 8.4×10^12 × ( 1.3×10^-9)^2

S =8.32×10^-5 + 7.13×10^-6

S = 9.03 × 10^-5 metres

The group that receives treatment is called the?
Tested Group
Control Group
Placebo Group
Experimental Group

Answers

Answer:

experimental group

Explanation:

please mark me as a brainlist..

Answer:

Experemtial group

Explanation:

The placebo is just sugar pills tested is ones already done and control is a mix of the two

How did oxygen get into the earths atmosphere in its early days? plz explain

Answers

Answer:

The answer is tiny organisms known as cyanobacteria, or blue-green algae. These microbes conduct photosynthesis: using sunshine, water and carbon dioxide to produce carbohydrates and, yes, oxygen. In fact, all the plants on Earth incorporate symbiotic cyanobacteria (known as chloroplasts) to do their photosynthesis for them down to this day.

Explanation:

Other Questions
im stuck on this question please help me the holy book of koran is carried by Which feature of a bacterial cell is attacked by many antibiotics?cell membranecell wallplasmidscytoplasm How did the New World continents come to be known as the Americas?1. The name was given by John Cabot due to his writings2.The name was given to it by Christopher Columbus in his journals3.The name was given to them by a map maker, 4.Waldseemueller, based onAmerigo Vespucci's writings about it.5.Cortez and Balboa named it after their conquests what is 4(5x+2)3x5= -30 Please solve this. It is confusing for me :A statement can also be called a declarative sentence.(A)True(B)False Words that change, limit, describe, or explain are called _____. A)modifiers B)verbs C)prepositions D)conjunctions Explain(in detail) why is it recommended that students write the introduction after they have written the essays body paragraph 2x + 20 = -3x-25 this is due in 20 minutes! In "A Wolf and Little Daughter," which part of the story creates anticipation that something bad might happen?Little Daughter lives in a house with Papa.Papa tells Little Daughter never to go out alone.Little Daughter likes to pick flowers.Little Daughter picks flowers inside the gate. Evaluate 3|-3|. helppppppppppp Was the rise of industry good for American workers? How is historical evidence useful to historian I need help please please oligary and monarchy are different in that please help i need this ASAP. i dont know what im doing What is one way that matter moves from the atmosphere to the geosphere ASAP! I need some help with these 5 statistics questions please! (I will post them all separately). Question 1: The mean time taken by all participants to run a road race was found to be 145 minutes with a standard deviation of 15 minutes. Using Chebyshev's theorem, find the percentage of runners who ran this road race in 100 to 190 minutes. Round your answer to the nearest integer. Part A: Consider the distance from the school to the coffee shop and the distance from the library to the coffeeshop. Draw their respective line segments in the above graph. If the school is relocated in a way that itis collinear to the coffee shop and the library and distance to the coffee shop is preserved, then thepoint representing the school will partition the line segment from the coffee shop to the library in a x: yratio. What are the values of x and y