Answer: Matter changes when electrons are gained or lost.
Explanation:
The charge on an atom changes when electrons are gained or lost during chemical changes.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether it is solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged particles and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral species and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ6
What equation explains the relation between amperes, watts and volts?
I = W-V
I = W+V
I = W/V
I = W*V
Answer:
I = W/V
Explanation:
Comes from the Equation P=I*V where P is Power measured in Watts, I is Current measured in Amps and V is Voltage measured in Volts.
Whats the best red waterproof lipstick? Need some help :)
[tex][tex]\blue{\rule{40pt}{900000000pt}}[/tex][/tex]
Si echamos en un vaso agua y sal el ¿huevo flotaria ? por que
WILL GIVE BRANIEST HELP
Which procedures were followed in this lab to decrease experimental error? Check all that apply.
using only two types of seeds, both from the same source
having one student count every sprout in every quadrat
using adjacent plots of land for both groups
increasing the sample size by combining data from multiple groups
repeating the experiment indoors under growth lights
measuring plant height the same way and at the same time for both groups
Answer:
Basically A, C, D, F
Explanation:
Summarizing the answer
Using only two types of seeds, both from the same source.
What are experimental error?Experimental error refers to the uncertainties or mistakes that can occur during scientific experiments, leading to inaccuracies in the results. These errors can arise due to a variety of reasons, such as human error, instrumental error, environmental factors, and methodological issues. The presence of experimental error can make it difficult to draw accurate conclusions from the data obtained during an experiment.
Scientists use various procedures to reduce experimental error and improve the accuracy and reliability of their results. These procedures can include:
using adjacent plots of land for both groupsincreasing the sample size by combining data from multiple groupsmeasuring plant height the same way and at the same time for both groups.Learn more about experimental error, here:
https://brainly.com/question/17038045
#SPJ2
A group of scientists are studying observable matter in a cluster of galaxies. They conclude that the cluster has only a small percentage of the mass required to keep it from
flying apart. Why does the duster remain intact?
Answer:
it is because of Dark Matter
Dark Matter, component of the universe whose presence is discerned from its gravitational attraction rather than its luminosity. Dark matter makes up 30.1 percent of the matter-energy composition of the universe; the rest is dark energy (69.4 percent) and “ordinary” visible matter (0.5 percent).
Dark matter is composed of particles that do not absorb, reflect, or emit light, so they cannot be detected by observing electromagnetic radiation. Dark matter is material that cannot be seen directly.
Explanation:
Hope It helps
Have A Nice Day : )
A group of scientists is studying observable matter in a cluster of galaxies. The duster remains intact due to the gravitational pull.
What is a galaxy?A galaxy is a collection of stars, stellar remains, interstellar gas, dust, and dark matter that are gravitationally bonded together.
Dark matter is a component of the universe whose gravitational pull can be detected rather than its luminosity. The universe's matter-energy ratio is made up of 30.1 percent dark matter, 69.4 percent dark energy, and “regular” visible matter (0.5 percent).
Since dark matter is made up of particles that do not absorb, reflect, or emit light, it is impossible to identify it through electromagnetic radiation observation. Dark matter is a substance that cannot be directly observed.
Therefore, a team of researchers is examining the material that can be seen in a clump of galaxies. Due to the gravitational force, the duster is unharmed.
To learn more about duster, refer to the link:
https://brainly.com/question/24544674
#SPJ2
Which of the following methods will usually cause a reaction to speed up?
Group of answer choices
Removing the catalyst.
Combining the reactants at a lower temperature.
Grinding one of the reactants into a powder.
Reducing the concentration of reactants.
the method that will usually cause a reaction to speed up from the list given is: Reducing the concentration of reactants.
Meaning of ReactionReaction can be defined as the combination of substances or a process where substances acts on each other, where substances changes into different substances.
A reaction can be said to be the event that causes a restructuring or rearrangement of atoms of a substance when it is in contact with another substance.
In conclusion, the method that will usually cause a reaction to speed up from the list given is Reducing the concentration of reactants.
Learn more about Reaction: https://brainly.com/question/26018275
#SPJ2
a.
Which of the following statements about empirical formulas is incorrect?
An empirical formula represents a molecule.
b. An empirical formula gives the smallest whole number ratio of each type of atom
in a molecule.
c. An empirical formula must be multiplied by an integer to obtain the molecular
formula.
d. The molecular formula can be the same as the empirical formula in some-
situations.
e.
All statements are correct.
Answer:
A
Explanation:
The empirical formula won't always represent a molecule if the molecular formula is not the smallest ratio between elements.
Please Help Will Mark Brainliest!!!
Liquid water can be separated into hydrogen gas and oxygen gas through electrolysis. 1 mole of hydrogen gas and 0.5 moles of oxygen gas is produced from 1 mole of liquid water collected in separate 10 L containers at 1 atm. Will the temperatures of the gases be equal? In one to two sentences, use the ideal gas law to explain your answer. (20 points)
Answer:
The ideal gas law specifies the mechanical behavior of ideal gases. It is capable of calculating the volume of gases produced or consumed.
In chemical equations, these equations are widely used to convert between volumes and molar quantities.
Use ideal gas law
Therefore
is the same for both So, = same for both.
When n increases, T decreases, so, n is 1 for and 0.5 for , implying that is hotter.
The temperatures of the gases will not be equal.
The ideal gas law specifies the mechanical behavior of ideal gases. It is capable of calculating the volume of gases produced or consumed. In chemical equations, this equation is widely used to convert between volumes and molar quantities. The ideal gas law states that the pressure, temperature, and volume of gas are related to each other[tex]PV=nRT[/tex]
∵V is the same for both
∴T= same for both.
When n increases, T decreases, so, n is 1 for hydrogen gas and 0.5 for oxygen gas ,implying that oxygen gas will have more temperature than hydrogen gas since its number of moles are lower than hydrogen gas.
Learn more:
brainly.com/question/1063475
What is the total amount of work done when Danny lifted 25 pounds of weight over 5 meters and applying 30- Newtons of Force?
Answer:
Definition and Mathematics of Work
Calculating the Amount of Work Done by Forces
Potential Energy
Kinetic Energy
Mechanical Energy
What is the atomic mass, in amu, of this atom?
Answer:precisely 1/12 the mass of an atom of carbon-12.
Explanation:The carbon-12 (C-12) atom has six protons and six neutrons in its nucleus. In imprecise terms, one AMU is the average of the proton rest mass and the neutron rest mass.
Please answer any of these
I’ll be grateful and I’m marking brainliest
What effect do shiny metals have on radiant energy?
Answer: Metals conduct heat and reduce the kinetic energy within the components that need to remain cool.
Explanation:
How many neutrons are in K-37?
Answer:
is this physics
pls check your questions and try again
How many grams of water are needed to absorb 456 J if its temperature goes from 22.7 to 98.3 Celsius?
The mass of water needed to absorb 456 J is 1.44 g
We'll begin by calculating the change in the temperature of the water.
Initial temperature of water (T₁) = 22.7 °C
Final temperature (T₂) = 98.3 °C
Change in temperature (ΔT) =?ΔT = T₂ – T₁
ΔT = 98.3 – 22.7
ΔT = 75.6 °CFinally, we shall determine the mass of the waterHeat absorbed (Q) = 456 J
Change in temperature (ΔT) = 75.6 °C
Specific heat capacity of water (C) = 4.184 J/gºC
Mass of water (M) =?Q = MCΔT
456 = M × 4.184 × 75.6
456 = M × 316.3104
Divide both side by 316.3104
M = 456 / 316.3104
M = 1.44 gTherefore, the mass of the water is 1.44 g
Learn more: https://brainly.com/question/15563205
1) Which of the following is true about Earth’s plates?
a. Earth’s plates are separated by oceans.
b. Earth’s plates are piled on top of one another within the Earth.
c. Earth’s plates fit closely together with the edges of the plates touching each other.
d. Earth’s plates are surrounded by melted rock and do not touch each other.
Answer:
a because the others whould cause earthquakes
Explanation:
Answer:
A
Explanation:
because i think is A (if is not im sorry )
Which of the following are needed for an electrical circuit? Choose all that apply
A.A mental conductor for electrons to pass through
B.light bulb
C.two negative ends to a battery
D.closed loop
E.charged battery to provide an electrical difference
Answer:
E\charged battery to provide electronic difference
Which element has a greater Ist ionization energy, Phosphorus or Fluorine?
Answer:
phosphorus
Explanation:
Help me with my Science, Part 1 and 2 please this has to be done by tomorrow
Answer:
Part 1: Condensation is when - a
Condensation happens when- water vapour suddenly freezes
Part 2: Water, condenses, vapour, cold, droplets, Condensation
Does this aid in joining the two molecules?
Answer:
yes it does aid in joining the two molecules
Explanation:
PLEASE HELP WILL AMRK BRAINLIEST
what is the atomic mass of Na3PO4?
Answer:
163.94
Explanation:
Na = 22.99 (3)
P = 30.97
O = 16.00 (4)
22.99(3) + 30.97 +16.00(4) = 163.94
Hope that helps
Which statement best describes mechanical energy?
the energy of electricity and motion
the energy of heat and magnetism
the energy of electricity and heat
the energy of moving parts and motion
Answer:
The energy of moving parts and motion
Explanation:
Mechanical energy doesn't have change in temperature or heat, so electricity and heat would be cancelled out. Mechanical energy is more about motion.
Please help ASAP!
How does an animal use sugar as a source of energy?
Plants and animals use glucose as a soluble, easily distributed form of chemical energy which can be 'burnt' in the cytoplasm and mitochondria to release carbon dioxide, water and energy. Pure monosaccharides, such as glucose, attract water.
An animal's body breaks down carbohydrates and converts them into simple sugar such as glucose. Glucose in the form of energy is carried through the blood and delivered to every cell of the body.
What is the function of sugar in animals?Carbohydrates are an important compound of all life on this planet. Both plants and animals utilize carbohydrates as a source of energy to keep their body functioning at the most basic level.
Carbohydrates fulfill needs by helping in the synthesizing of other chemicals and giving structure to cells within the body. Carbohydrates are carrying out normal functions such as growth, movement, and metabolism.
Carbohydrates store energy in the form of starch and provide either simple or complex sugars. Polysaccharides, give a steady supply of energy while sugars, monosaccharides, and disaccharides, supply quick energy on dissolving.
Carbohydrates have the side effect of helping with the processing of other body's chemicals. As carbohydrates break down, they release energy.
Learn more about carbohydrates, here:
https://brainly.com/question/14614055
#SPJ2
A solution is prepared by dissolving 15.0 g of table salt in 70.0g of water. Find(a) the mass percent of solute and (b) the mass percent of solvent.
Answer:
[(15g NaCl/(70+15)]*100 = % NaCl
{(70g H2O/(70+15)]*100 = % H2O
Explanation:
A solution is prepared by dissolving 15.0 g of table salt in 70.0g of water. (a) The mass percent of solute is 17.64 % and (b) The mass percent of solvent is 82.35 %.
How to calculate the Mass percent of solute ?Mass percentage = [tex]\frac{\text{Mass of solute}}{\text{Mass of solute + Mass of solvent}}[/tex] × 100
How to calculate the Mass percent of solvent ?Mass percentage = [tex]\frac{\text{Mass of solvent}}{\text{Mass of solute + Mass of solvent}}[/tex] × 100
Here,
Mass of solute (table salt) = 15.0 g
Mass of solvent (water) = 70.0 g
(a) The mass percent of solute
Put the value in above formula we get
Mass percentage = [tex]\frac{\text{Mass of solute}}{\text{Mass of solute + Mass of solvent}}[/tex] × 100
= [tex]\frac{15}{15 + 70}[/tex] × 100
= [tex]\frac{15}{85}[/tex] × 100
= 17.64 %
(b) The mass percent of solvent
Mass percentage = [tex]\frac{\text{Mass of solvent}}{\text{Mass of solute + Mass of solvent}}[/tex] × 100
= [tex]\frac{70}{15 + 70} \times 100[/tex]
= [tex]\frac{70}{85} \times 100[/tex]
= 82.35 %
Thus, we can say that (a) The mass percent of solute is 17.64 % and (b) The mass percent of solvent is 82.35 %.
Learn more about the Mass Percentage here: https://brainly.com/question/26150306
#SPJ2
Hello! Everyone:) I was just wondering if you can help me with my test.
Points: 99
Answer:
By their properties ;)
Explanation:
[tex]\Large \boxed{\sf by \ their \ properties}[/tex]
Every element has a set of particular characteristics. Each has a unique atomic and mass number because they contain a different ratio of protons and neutrons. The number of protons in an element mirrors the element's atomic number. The mass number equals the sum of the element's protons and neutrons.
According to increasing atomic numbers, chemical elements get organized. Periods and groups are the names of the horizontal rows and vertical columns, respectively. The chemical characteristics of elements within the same group are comparable due to their similar valency and number of outer electrons.
Which of the following is the correct way to do it for 3753 Scientific notation
Answer:
b
Explanation:
it is b because it has 4 spots and that would be 3 zeros so it is to the 3rd power
will give brainlist to a person with correct answers for all (please help me)
1. Explain how is LiCl formed?
2. What is a combination/synthesis reaction
3. What is a decomposition reaction?
4. What is a single-replacement reaction?
5. What is a double-replacement reaction?
6. What are the trends in electronegativity within groups and across periods in the periodic table?
7. Which element has the lowest electronegativity value?
8. How does electronegativity determine the type of bond that atoms will form?
9. What type of bond will form between 2 atoms that have a large difference in electronegativity?
10. What type of bond will form between 2 atoms when the difference in electronegativity is 0.5?
11. Which element has the highest electronegativity value?
12. What does it mean that matter cannot be created nor destroyed in a Chemical reaction?
Answer:
1. LiCi is formed by the treatment of lithium carbonate with hydrochloric acid
2. A combination reaction (also known as a synthesis reaction) is a reaction where two or more elements or compounds (reactants) combine to form a single compound (product).
3. Chemical decomposition, or chemical breakdown, is the process or effect of simplifying a single chemical entity into two or more fragments.
4. A single-displacement reaction, also known as single replacement reaction or exchange reaction, is a chemical reaction in which one element is replaced by another in a compound
5. Double replacement reactions have two ionic compounds that are exchanging anions or cations.
6. The most electronegative elements are found on the top right of the periodic table.
7. cesium
8. Electronegativity describes the degree to which an atom attracts electrons in a chemical bond. But the electronegativity of two atoms would determine their bond type.
9. ionic bond
10. polar covalent bond
11. fluorine
12. Matter can change form through physical and chemical changes, but through any of these changes, matter is conserved. The same amount of matter exists before and after the change.
Hope i was able to help!!!
How many elements are present in the compound Na_2S_2O_3
Answer:
3 elements are present in thr compound
What is the number of atoms of oxygen in 0.1 mol of CuSO4.5H2O? & explain
Pls fast pls due today pls pls I don’t wanna fail
Answer:
2:true
3: true
4:false
5: true
Explanation:
metallic bonding in a group three metal
Answer: In a pure metal, there are atoms that are surrounded by free moving valence electrons in which they move from one part of metal to another part . There for we can conclude that pure metals are held together by things called metallic bonds and due to attraction between the mobile valence electrons and the positively charged metal ions.
Explanation:
The ability to be drawn into thin sheet is called malleability. The ability to be drawn into thin wires is called ductility. Therefore, the metallic bonds is between metals and metals.
What is metallic bonding?Metallic bonding is a type of chemical bonding that rises from the electrostatic attractive force between conduction electrons and positively charged metal ions.
Covalent bonds are not strong bond. They can not have malleability and ductility. Ionic bonds are very strong bond. These are too not malleable or ductile. Lewis structure is used to show valence electron of every element in a molecule so, it has nothing to do with malleability and ductility. Due to metallic bonding, there is high melting and boiling point.
Therefore, the metallic bonds is between metals and metals.
To know more about metallic bonding, here:
https://brainly.com/question/11752090
#SPJ2