Student is attempting to hit a target 4 meters from the edge of the desk that is 1.4 m tall marble rules of a table horizontally as shown below according to the above information in diagram what velocity must a marble have to strike the target?

Student Is Attempting To Hit A Target 4 Meters From The Edge Of The Desk That Is 1.4 M Tall Marble Rules

Answers

Answer 1

Answer:

The correct option is;

7.49 m/s

Explanation:

The time it takes the marble to fall vertically is given by the equation

s = u·t + 1/2·g·t²

Where;

s = The height of the table = 1.4 m

u = The initial vertical velocity = 0 (The marble is given only an initial horizontal push (velocity))

g = The acceleration due to gravity = 9.81 m/s²

t = The time it takes the marble to reach the ground 1.4 m below

Plugging in the values. gives;

1.4 = 0×t + 1/2 × 9.81 × t²

∴ t² = 1.4/(1/2 × 9.81) ≈ 0.28542 s²

t = √0.28542 ≈ 0.5342s

The horizontal range the marble is to cover in the approximately 1.87 seconds before it reaches the ground = 4 meters

Therefore, the velocity that allows the marble to reach 4 meters in 1.87 seconds is give as follows;

Velocity = Distance/Time = 4 m/(0.5342 s) ≈ 7.49 m/s

Therefore the horizontal velocity the marble must have to strike its target is approximately 7.49 m/s.


Related Questions

Convert the following from scientific notation to standard notation.

1. 3.47 x 108
2. 7.94 x 103
3. 1.96 x 10-3
4. 4.50 x 109
5. 9.61 x 10-6
6. 2.02 x 105
7. 7.01 x 10-10
8. 4.44 x 101

Answers

Answer:

1.) 347,000,000

2.)7,940

3.)0.00196

4.)4,500,000,000

5.)0.00000961

6.)102,000

7.).000000000701

8.)44.4

Explanation:

when the power is positive, you just need to move decimal point to your right , for a number of times which is similar to the value of the power.

Eg. 3.47×10 raised to the power 8.

with this, move the decimal point to the right eight times which will be 347,000,000.

But when the power is negative, move the decimal point to the left for a number times which will be similar to the value of the power.

Eg. 1.96×10 raised to the power negative 3.

move the decimal point leftwards three times which will be 0.00196

Please mark as brainliest.

How is Impulse related to Force?

Answers

In classical mechanics, impulse (symbolized by or Imp) is the integral of a force, , over the time interval, , for which it acts. Since force is a vector quantity, impulse is also a vector quantity. Impulse applied to an object produces an equivalent vector change in its linear momentum, also in the same direction.

Which particle is used as a beam to treat cancer? electron neutron proton

Answers

Answer:neutron

Explanation:

Because it is similar to the motor neurons

Answer:

Proton

Explanation:

Proton therapy, also called proton beam therapy, is a type of radiation therapy. It uses protons rather than x-rays to treat cancer. A proton is a positively charged particle. At high energy, protons can destroy cancer cells.

a nucleus with four protons have a total positive charge of what

Answers

Answer:

The name of element is Beryllium.

Explanation:

Given that,

A nucleus with four protons have a total positive charge.

Suppose, what is the name of element ?

We know that,

The name of element which have 4 positive charge is Beryllium.

Beryllium is a element which is symbol is Be.

Atomic number of beryllium is 4 and atomic mass is 9.

The number of neutrons are 5.

Hence, The name of element is Beryllium.

HEY CAN ANYONE PLS ANSWER DIS!!!!!!!

Answers

Answer:

A) the one with the lower boiling point.

Please mark me brainliest! Hope this helped!

God bless :)


A man jumps from an airplane and does not
open
his parachute immediately. As he falls,
two forces act on him: the force mg due to
gravity and the force n, of air resistance. Now
he opens his parachute and begins to fall at
constant velocity.
What forces act upon him now?

Answers

Answer:

The forces acting on a skydiver jumping from a plane include the gravitational force and air resistance

Explanation: i, dumb so this is proabaly wrong

free brainlist but you have to get this right
100000000000000000000 times 200000000000000 times 3000000000000000 times 1 times 200000000000000000000000000000 times 5
You Can Use Caculator

Answers

Answer:

the answer is 6e+79

Answer:

yea the answer is 6e+79 i did use a couculater though

Explanation:

does this curved graph show a function explain how you know

Answers

Answer:

No; the graph fails the vertical line test.

The vertical line test is a tool used to determine if we have a function. If we can draw a single straight vertical line through more than one point on the red curve, then the graph is said to have failed the vertical line test. Consequently, this leads to the relation not being a function.

For this circle graph, we can draw a vertical line through more than one point, which is why we don't have a function here.

Put another way, there are inputs (x) that produce more than one output (y), so that's why we don't have a function.

-BBBM

How does increasing frequency affect the crests of a wave?

Answers

Answer:

your getting in the water causes it to make a giant wave

Explanation:


If the distance of an object is determined from the relation: d = a X + b Y Where: (d) is the distance covered by the body. (a) is a physical quantity which has a dimensions (L T^-1). (b) Is a physical quantity which has a dimensions (L T^-2). So: *

The dimension formula of (X) is T and that of (Y) is T^2.

The dimension formula of (X) is T and that of (Y) is T^-2

The dimension formula of (X) is T^-1 and that of (Y) is T^2.

The dimension formula of (X) is T^-1 and that of (Y) is T^-2.​

Answers

Answer:

The dimension formula of X is T and that of Y is  T^2

Explanation:

                     d = aX + bY is ACTAULLY  [tex]S = V_{i} t + \frac{1}{2} a t^{2}[/tex]

                     so v = LT^-1

                          t = T

                          numerics do not have any dimensional formula so ignore [tex]\frac{1}{2}[/tex]

                          a = LT^-2

                          t = T^2

                         So answer for x is T and y T^2

A vector has an x-component
of 6.15 m and a y-component
of -3.88 m.
Find the direction of the vector.

Answers

The direction is θ degrees clockwise from the x axis (east direction)

tan θ = 3.88/6.15 = 0.631

Angle θ = 32.3 degrees

Tyler traveled 36 km at a speed of 8 km/hr. Mark traveled 48 km at a speed of 10 km/hr. Who traveled the fastest? Who got to their destination first?

Answers

Answer:

Tyler got to his destination first. It took him 4.5 hours

Explanation:

Tyler's trip: 36 / 8 = 4.5 hrs

Mark's trip: 48 / 10 = 4.8 hrs

what is a blastocyst definition

Answers

Answer: Explanation:

Blastocyst, a distinctive stage of a mammalian embryo. It is a form of blastula that develops from a berrylike cluster of cells, the morula. A cavity appears in the morula between the cells of the inner cell mass and the enveloping layer.

Acar accelerates from 5 ms to 27 mis in 10 seconds. What is the acceleration in m/s??

Answers

Explanation:

Acceleration is final velocity minus initial velocity divided by time.

a = (v − u) / t

a = (27 m/s − 5 m/s) / 10 s

a = 2.2 m/s²

can alligators drink Gatorade

Answers

Answer:

Probably not my guy

Explanation:

Please help
Quickly!!!..

Answers

There are two possible answers that I can see, C or D

Why does frost bite occur in mountain climbers ?​

Answers

Answer:

Because they are in places that may be extremely cold

Explanation:

For example take Mount Everest. This place is a very high mountain, and is very cold. Usually hikers would get a frost bite from how cold it is in there. According to google, "Frostbite is an injury caused by freezing of the skin and underlying tissues."

Pls Answer I have a time limit!!!
How can mass be measured?
Group of answer choices

bathroom scale

spring scale

balance

scale

Answers

Answer:

Balance scale would be the answer

Answer:

The basic SI unit of mass is the kilogram (kg). In physics, mass is not the same as weight, even though mass is often determined by measuring the object's weight using a spring scale, rather than balance scale comparing it directly with known masses.

Balanced Scale

x = yz
How do you solve for z?

Answers

Answer. z=x/y. Isolate “z” by dividing “y” from both sides.
Explanation. Treat the variables like any other number(s). We can plug in numbers but you don’t have to. We must isolate z to get the answer. To do this, divide both sides by y and you get your answer of z=x/y. Hope this helps, let me know if it’s correct so others can use it :)
Good luck.

Who do you think took Ms. C's lunch?

Answers

Answer:

the main character

Explanation:

i think

a car moving on a road passes by kilometer 218 at 10:15 am and milestone 236 at 10:30 am. determine an average scalar speed in km / h over this stretch.

Answers

Answer:

v?

Explanation:

v = ∆s / ∆t

v =?

∆s = 236 - 218 = 18km

=t = 10: 30 - 10:15 = 15 minutes to hour 15/60 = 0.25h

v = 18 / 0.25

v = 72km / h

speed of 72km / h

. Explain What makes the rock cycle a cycle?
SC.7.E.6.2 hi how do you do this

Answers

The Rock cycle is a model that describes the formation degradation, and regeneration of rocks as a result of sedimentation magma, and metamorphism. All rocks are made of minerals.

Rock circulation is the process by which rocks change continuously between three types igneous sedimentary and metamorphic. The three processes that transform one rock into another are crystallization, metamorphism erosion, and sedimentation. Any rock can be transformed into another rock by undergoing one or more of these processes. This creates a lock cycle.

Rock circulation is a fundamental concept that describes the transition between three rock types metamorphic igneous, and sedimentary rocks. Simply put it is a set of processes that create and transform rock types within the Earth's crust. Rock cycling by definition is the natural process by which sedimentary igneous, and metamorphic rocks are formed, transformed from one type to another, and destroyed.

Learn more about The Rock cycle here:-https://brainly.com/question/12863450

#SPJ1

Elements in the same______
are more chemically similar.
THIS IS URGENT!!!!

Answers

Answer:

group

Explanation:

And vote me brainliest

They are in the same group

If you are doing 4 sets of 10 repetitions of air squats you are doing _____ x _____ which equals to _____ air squats

Answers

Answer:

4x10=30

Explanation:

You can easily know it's multiplication when you see the sign. It gives you the number but you have to plug it in. So once you plug in the numbers then you should get either 4x10 or 10x4 which means both is equal to 40

Terry rides his bike at a constant speed of 10.3 m/s. If he rides for 10 minutes, how far has he ridden?

Answers

Answer:

6180

Explanation:

if he is riding at 10.3 meters per second, and is riding for 10 minuets you multiply 10.3 by 60 for 1 minuet and get 618. Then multiply 618 by 10 for 10 minuets and you get 6180

Answer:

618 of 103

Explanation:

If you do 10.3 x 60 you will get 618

If you do 10.3 x 10 you will get 103

A car traveling 6.0 m/s is uniformly accelerating at a rate of 3.0 m/s^2 for 15 seconds. What is its final velocity

Answers

Answer:

51m/s^1

Explanation:

v=u+at

v=(6)+(3)(15)

v=51m/s^1

Who was the first person to walk on the moon ?

Answers

Answer:

god correct correct

Explanation:

How far will a car travel in 2 hours at 20 km/hr?
20 km
40 km
80 km
O km

Answers

Answer:

It should be 40

Answer:

I think it is 40km sorry if my Answer is wrong

PLEASE HELP!!! a skateboard rolls down a ramp, starting from rest. after 3seconds, the skateboard’s velocity is 15m/s. what is the acceleration of the skateboarder?

Answers

V = Vi + at
15 = 0 + a (3)
15/3 = a
acceleration = 5 m/s^2

1 HELP PLEASE I'LL GIVE BRAINLIST AND POINTS!!!
Do some research on digital vs. analog recording, and decide which you think gives the most accurate and best quality sound. State the advantages and disadvantages of each in a paragraph. Be sure to back up your opinions with facts, and state your sources.

have 2-6 paragraphs pleasee

Answers

Answer:

The question of analog vs. digital audio is one of the more hotly debated questions in the world of music, film and media today. Does digital sound better? Does analog sound better? Is there even a noticeable difference?

It’s impossible to understand the difference completely without understanding what distinguishes analog audio from digital audio. A full discussion of these terms is best left to your curriculum and discussions with your mentor in the studio. For now, though, here’s a brief explanation of what these two words mean, and the differences between them.

Analog refers to a continuously changing representation of a continuously variable quantity. Digital, however, refers to representing these variable quantities in terms of actual numbers, or digits. The last two sentences seem a bit complex, but let’s try to simplify them with an example. If you consider the numbers 1 and 2 on a number line, there are actually an infinite number of points between 1 and 2. This is what analog represents—the infinite number of possibilities between 1 and 2. Digital, on the other hand, only looks at certain number of fixed points along the line between 1 and 2 (for example, 1 ¼, 1 ½, 1 ¾, and 2).

Can you see the difference? Digital takes a few “snapshots” of the number line, while analog takes the whole line into account.

As another example, think of analog vs. digital as the difference between seeing something in real life and watching it on film. When we see something happen in real life, there are no “spaces” between what we see, so we’re watching it happen in analog. Film, however, is actually a series of still photographs that are taken in rapid-fire intervals, and when we see them in succession, it tricks our minds into thinking we’re seeing a continuous flow of movement. So in a manner of speaking, when we watch the event happen on film, we’re watching it digitally, because we’re watching increments of the event, rather than the whole thing in fluid motion. (Not to be confused with digital video vs. film, which is another discussion completely!)

Let’s bring this idea into audio, music, and the studio. Sound occurs naturally in analog–that is to say, sound occurs in a continuous set of waves that we hear with the human ear. (Think of it as a “wavy” line with an infinite number of points along it.) When we capture that sound in a way that represents all the possible frequencies, we’re recording in analog; when we use computers to translate the sound into a series of numbers that approximate what we’re hearing, we’re recording in digital.

Thus, a purely analog recording would be something that was recorded on tape and produced using manual equipment to mix, master and press into a vinyl LP. A purely digital recording would be recorded on a computer program such as Pro Tools, mixed, mastered and produced digitally, and eventually burned onto a CD as an MP3 or audio file.

The most ironic aspect of the debate about digital vs. analog recording is that nowadays a lot of music is a combination of the two.  For example, you might record a song onto analog tape, but mix and master it digitally, or release it on the Internet as an MP3.

So what’s the difference in quality between analog and digital? The idea between digital recording is that our ears and brains technically can’t determine the spaces between the digital values, just like our brains interpret film as continuous motion. However, to many people, analog sound tends to be warmer, has more texture and is thought to capture a truer representation of the actual sound. Digital is felt to be somewhat cold, technical and perhaps lacking in analog’s nuance.

However digital is much cheaper. Recording an album with analog technology can require a whole studio full of equipment, but with digital recording technology, it’s possible to record a whole album in a bedroom on a laptop. And whereas analog technology can wear out or be damaged, digital media can last for an indefinite length of time.

Today many recording artists, both major and independent, record using a mixture of digital and analog techniques. While analog audio does give warmth and a truer sound quality, digital is cheaper to work with and offers more control over the finished product.

Other Questions
-Qu virtudes deberan tener mis nuevos amigos? Por qu?- Qu influencia tiene la gente que nos rodea en nuestra vida?-Puede un verdadero amigo hacerme una mejor persona? Cmo?Espero que me contestes pronto.Con cario,Pepe What was the appeal to Christianity to many people in Ancient Rome 3x-(2x+4)I need help What was the distinctive characteristics of Myron, Discobulus You worked 5.5 hours one day and 3 hours another day. You had 8 dollars already and now that you have been paid, you have $84.50. How much were you paid an hour SAY UR FAVORITE CELEBRITY IN THE COMMENTS I and m are parallel to each other Bit transmission errors between computers sometimes occur, where one computer sends a 0 but the other computer receives a 1 (or vice versa). Because of this, the computer sending a message repeats each bit three times, so a 0 is sent as 000 and a 1 as 111. The receiving computer "decodes" each triplet by majority rule: whichever number, 0 or 1, appears more often in a triplet is declared to be the intended bit. For example, both 000 and 100 are decoded as 0, while 101 and 011 are decoded as 1. Suppose that 6% of bits are switched (0 to 1, or 1 to 0) during transmission between two particular computers, and that these errors occur independently during transmission.(a) Find the probability that a triplet is decoded incorrectly by the receiving computer.(b) Using your answer to part (a), explain how using triplets reduces communication errors.(c) How does your answer to part (a) change if each bit is repeated five times (instead of three)?(d) Imagine a 25 kilobit message (i.e., one requiring 25,000 bits to send). What is the expected number of errors if there is no bit repetition implemented? If each bit is repeated three times? Write why is asexual is better. 1 paragraph The people who will be reading your writing are known as yourO A. audienceO B. teachersO C. boss and coworkersD. friends What determines the vast majority of characteristics in an atom? if a blood test is ? how do you think the water level affects the sound/pitch produced? If a sample of copper is 215g, how many moles of copper atoms are in the sample? Why do you think the electron of the hydrogen atom stays close to the proton in the atoms nucleus? Fechter Corporation had the following stockholders equity accounts on January 1, 2020: Common Stock ($5 par) $500,000, Paid-in Capital in Excess of ParCommon Stock $200,000, and Retained Earnings $100,000. In 2020, the company had the following treasury stock transactions. Mar. 1 Purchased 5,000 shares at $8 per share. June 1 Sold 1,000 shares at $12 per share. Sept. 1 Sold 2,000 shares at $10 per share. Dec. 1 Sold 1,000 shares at $7 per share. Fechter Corporation uses the cost method of accounting for treasury stock. In 2020, the company reported net income of $30,000.Required:Journalize the treasury 2020, for net income. Haiti's language is a Creole language. It is primarily based on __________, with influences from Spanish and __________ dialects. A. French . . . English B. English . . . French C. French . . . African D. Portuguese . . . French Please select the best answer from the choices provided A B C D Need help really bad help plz Which structure in plants produces a substance that protects the extending roots from developing friction? A check-processing center uses exponential smoothing to forecast the number of incoming checks each month. The number of checks received in June was 38 million, while the forecast was 43 million. A smoothing constant of 0.20 is used. a) Using exponential smoothing and given alpha, the forecast for the month of July = nothing million checks received (round your response to one decimal place). b) If the check-processing center received 44 million checks in the month of July, then using exponential smoothing and given alpha, the forecast for the month of August = nothing million checks received (round your response to one decimal place). c) Exponential smoothing may not be an appropriate method to use for the check-processing center because: A. the check-processing center should observe an increasing trend in its processing requirements. B. the check-processing center should observe seasonality in its processing requirements. C. the