Radioactive americium-241 is used in household smoke detectors and in bone mineral analysis.
Give the number of electrons, protons, and neutrons in an atom of americium-241.

Answer:

[tex]\boxed {\tt 1.0 \ g/mL}[/tex]

Explanation:

Density can be found by dividing the mass by the volume.

[tex]d=\frac{m}{v}[/tex]

The mass of the water is 50.0 grams.

The volume of the water is 50.0 milliliters.

[tex]m= 50.0\ g \\v=50.0 \ mL[/tex]

Substitute the values into the formula.

[tex]d=\frac{50.0 \ g}{50.0 \ mL}[/tex]

Divide.

[tex]d= 1.0 \ g/mL[/tex]

The density of the water is 1.0 grams per milliliter. Also, remember that the density of pure water is always 1.0 g/mL or g/cm³

Answer:

Thus, at convergent boundaries, continental crust is created and oceanic crust is destroyed. Two plates sliding past each other forms a transform plate boundary. Natural or human-made structures that cross a transform boundary are offset—split into pieces and carried in opposite directions.

Explanation:

Answer:

11.023 pounds

Explanation:

Answer:

1) easy compressed

2) fills its container

3) far more space

Explanation:

It is critical to watch or observe what is happening with every step of your experiment

Answer:

the correct answer would be A. acidity

Answer:

The answer is A.) Acidity

Answer:

Definition: Fluid that can act as a liquid or as a solid depending on the pressure applied on it.

Explanation:

A fluid that incorporates time in a solid and liquid model is a non-Newtonian fluid. This type of fluid can behave as a solid or as a liquid depending on the pressure that is applied on it. This is different from normal fluids that remain the same regardless of the pressure they are subjected to. In the case of non-Newtonian fluids, when submitted to pressure, they are presented as solids, but without pressure, they are presented as liquids. This feature can be seen even within the same system.

Answer:

Explanation:

pH = 10.3

[ H] = 10⁻¹⁰°³

= 5 x 10⁻¹¹ M

concentration of CsOH C = 3 M

pKa of carbonate = 6.35

Ka = 10⁻⁶°³⁵ = 4.46 x 10⁻⁷

Buffer capacity = 2.303 x C x Ka x [ H⁺] / ( Ka + [ H⁺]² )²

= 2.303 x 3 x 4.46 x 10⁻⁷  x 5 x 10⁻¹¹ / ( 4.46 x 10⁻⁷  + 25 x 10⁻²² )²

= 154 x 10⁻¹⁸ / 19.9 x 10⁻¹⁴

= 7.74 x 10⁻⁴ .

Answer:

a)Weight of Y extracted from water in single extraction = 67.2 g

b) Total weight of Y extracted from water in two successive extractions = 70.9 g

Explanation:

Distribution coefficient, Kd = Cs / Cm

where Cs  is concentration of solute in methylene chloride; Cm is concentration of solute in water

a) Let x g of solute Y be extracted into methylene chloride

72.0 - x g of Y will be left in water

Kd = (x/180 mL of methylene chloride) / (72.0 - x/180 mL of water) = 14

14 = 180 * x / 180 * 72.0 - x

x = 14(72.0 - x)

x = 1008 - 14x

15x = 1008

x = 1008/15

x = 67.2 g

Weight of Y extracted from water in single extraction = 67.2 g

b) First extraction: Let x g of solute Y be extracted into methylene chloride

72.0 - x g of Y will be left in water

14 = x/90 / 72.0 - x/180

14 = 180x/ 90(72.0 - x)

14 = 2x/ 72.0 - x

2x = 14(72.0 - x)

2x =  1008 - 14x

16x = 1008

x = 63.0 g

Second extraction: Amount of solute left in water after first extraction = 72 - 63 = 9.0 g

Let x g of solute Y be extracted into methylene chloride

9.0 - x g of Y will be left in water

14 = x/90 / 9.0 - x/180

14 = 180x/ 90(9.0 - x)

14 = 2x/ 9.0 - x

2x = 14(9.0 - x)

2x =  126 - 14x

16x = 126

x = 7.90 g

Total weight of Y extracted = (63 + 7.90) g

Total weight of Y extracted from water in two successive extractions = 70.9 g

a) The Weight of Y extracted from water in single extraction is 67.2 g

b) The Total weight of Y extracted from water in two successive extractions should be 70.9 g

Here

The distribution coefficient, Kd should be

= Cs / Cm

where

Cs  should be a concentration of solute in methylene chloride;

Cm should be a concentration of solute in water

a) Let  us assume x g of solute Y that should be extracted into methylene chloride

So,

72.0 - x g of Y will be left in water

And, now

Kd = (x/180 mL of methylene chloride) / (72.0 - x/180 mL of water) = 14

So,

14 = 180 * x / 180 * 72.0 - x

x = 14(72.0 - x)

x = 1008 - 14x

15x = 1008

x = 1008/15

x = 67.2 g

b)

Now First extraction:

Let x g of solute Y be extracted into methylene chloride

So,

72.0 - x g of Y will be left in water

14 = x/90 / 72.0 - x/180

14 = 180x/ 90(72.0 - x)

14 = 2x/ 72.0 - x

2x = 14(72.0 - x)

2x =  1008 - 14x

16x = 1008

x = 63.0 g

Second extraction:

Amount of solute left in the water after the first extraction that should be

= 72 - 63

= 9.0 g

Now

Let x g of solute Y be extracted into methylene chloride

9.0 - x g of Y will be left in water

14 = x/90 / 9.0 - x/180

14 = 180x/ 90(9.0 - x)

14 = 2x/ 9.0 - x

2x = 14(9.0 - x)

2x =  126 - 14x

16x = 126

x = 7.90 g

Total weight of Y extracted = (63 + 7.90) g

= 70.9g

Learn more about extraction here: https://brainly.com/question/15840419

Answer:

True

Explanation:

Because atoms with the same number of valence electrons react in similar ways with other elements.

Answer:

ΔH°rxn = -827.5 kJ

Explanation:

Let's consider the following balanced equation.

2 PbS(s) + 3 O₂(g) → 2 PbO(s) + 2 SO₂(g)

We can calculate the standard enthalpy of reaction (ΔH°rxn) from the standard enthalpies of formation (ΔH°f) using the following expression.

ΔH°rxn = [2 mol × ΔH°f(PbO(s)) + 2 mol × ΔH°f(SO₂(g) )] - [2 mol × ΔH°f(PbS(s)) + 3 mol × ΔH°f(O₂(g) )]

ΔH°rxn = [2 mol × ΔH°f(PbO(s)) + 2 mol × ΔH°f(SO₂(g) )] - [2 mol × ΔH°f(PbS(s)) + 3 mol × ΔH°f(O₂(g) )]

ΔH°rxn = [2 mol × (-217.32 kJ/mol) + 2 mol × (-296.83)] - [2 mol × (-100.4) + 3 mol × 0 kJ/mol]

ΔH°rxn = -827.5 kJ

The standard enthalpy of the reaction is -827.5 kJ/mol

The standard enthalpy of reaction [tex]\mathbf{\Delta H^0_{rxn}}[/tex] is the enthalpy change that happens in a system whenever one mole of the matter is converted through a chemical process under normal conditions.

The given reaction can be expressed as:

2PbS(s) + 3O₂(g) → 2PbO(s) + 2SO₂(g)

The standard enthalpy can be represented by the equation:

[tex]\mathbf{\Delta H^0_{rxn} = \sum \Delta _f ^0(products) - \sum \Delta _f^0(reactants)}[/tex]

At standard conditions, the standard enthalpies of formation of the given species are:

∴

[tex]\mathbf{ \Delta H^0_{rxn} = \Big[2 mol \times \Delta H^0_f(PbO(s)) + 2 mol \times \Delta H^0_ f(SO_2(g) )\Big] - \Big[2 mol \times \Delta H^0_f (PbS(s))} + \mathbf{ 3 mol \times \Delta H^0_f(O_2(g) )\Big] }}[/tex]

[tex]\mathbf{\Delta H^0rxn = [2 mol \times (-217.32 kJ/mol) + 2 mol \times (-296.83)] - [2 mol \times (-100.4)} \\ \mathbf{+ 3 mol \times 0 kJ/mol]}}[/tex]

[tex]\mathbf{\Delta H^0rxn = -827.5 \ kJ/mol}}[/tex]

Therefore, we can conclude that the standard enthalpy of the reaction is -827.5 kJ/mol

Learn more about standard enthalpy of the reaction here:

https://brainly.com/question/25140395?referrer=searchResults

Answer:

1.24 L of H₂ at STP .

Explanation:

2Al(s)    +6HCl(aq)    →    2AlCl₃(aq)   +    3H₂(g)

2 moles                                                  3 x 22.4 L

2 x 27 g of Al reacts to give  3 x 22.4 L of H₂ at STP .

1 g of Al will react to give 3 x 22.4 / ( 2 x 27 ) L of H₂ at STP .

= 1.24 L of H₂ at STP .

The volume of hydrogen produced by 1 grams of Al has been 1.24 L.

The balanced chemical reaction has been given as:

[tex]\rm 2\;Al\;+\;6\;HCl\;\rightarrow\;2\;AlCl_3\;+\;3\;H_2[/tex]

From the equation, 2 moles of Aluminum gives 3 moles of Hydrogen

The mass of the compound from moles can be given as:

Mass = moles × molecular mass

Mass of 2 moles Al = 2 × 27 g

Mass of 2  moles Al = 54 g

Mass of 3 moles hydrogen = 3 × 2 g

Mass of 3 moles hydrogen = 6 g

From the equation,

54 g aluminum gives = 6 grams hydrogen

[tex]\rm 1\;gram\;aluminum\;=\;\dfrac{6}{54}\;\times\;1[/tex]

1 gram Aluminum = 0.11 grams hydrogen

The mass of hydrogen produced by 1 gram Al has been 0.11g. The moles equivalent to 0.11g hydrogen has been given as:

Mass = moles × molecular mass

0.11 g = moles × 2 g/mol

Mole of hydrogen = 0.055 mol

The moles of hydrogen produced by 1 gram of Al has been 0.055 mol.

According to the ideal gas equation, any gas at STP has 1 mole equivalent to 22.4 L. So,

1 mol = 22.4 L

0.055 mol = 0.055 × 22.4 L

0.055 mol = 1.244 L.

The volume of hydrogen produced by 1 grams of Al has been 1.24 L.

For more information about volume at STP, refer to the link:

https://brainly.com/question/11676583

The mass number of an element is the sum of the protons and neutrons present in the nucleus of the atoms of the element.

The mass number of an element is the number obtained when the number of protons and neutrons in the nucleus of an atom of the element are summed together.

The sum of protons and neutrons in the nucleus of an atom is collectively known as the nucleon. Thus, the mass number of an atom can also be referred to as the nucleon of the atom.

This can be mathematically expressed as:

Mass number = number of protons + number of neutrons.

Atoms generally contain protons, neutrons, and electrons. The protons are positively charged and are located in the nucleus, the neutrons are also located in the neucleus but have no charges. The electrons, on the other hand, are located outside the nucleus in regions referred to as orbitals.

The sum of the protons and neutrons determine the mass of an atom because the contribution of electrons to the mass of atoms is negligible.

Thus, the mass number of an element is the sum of proton and neutron numbers present in the nucleus of the atoms of the element.

More on mass number can be found here: https://brainly.com/question/4408975

#SPJ1

Answer:

The Group 1 elements in the periodic table are known as the alkali metals. They include lithium, sodium and potassium, which all react vigorously with water to produce an alkaline solution.

Explanation:

Answer:

Cellulose is an organic compound with the formula , a polysaccharide consisting of a linear chain of several hundred to many thousands of β linked D-glucose units. Cellulose is an important structural component of the primary cell wall of green plants, many forms of algae and the oomycetes.

Explanation:

Answer:

Hope this helped.

Explanation:

Cellulose is a molecule, consisting of hundreds – and sometimes even thousands – of carbon, hydrogen and oxygen atoms. Cellulose is the main substance in the walls of plant cells, helping plants to remain stiff and upright. Humans cannot digest cellulose, but it is important in the diet as fibre.

Answer:

The answer is 16

Explanation:

Answer:

its C and D

C. The brown substance is molecular

D. The blue substance is ionic

Explanation:

did the test !

Two correct statements are B) The silver substance is ionic

C) The brown substance is molecular.

Silver is a chemical element with the symbol Ag and atomic wide variety 47. categorized as transition steel, Silver is stable at room temperature.

It is a molecular substance, that's a substance with or more atoms, the smallest gadgets of remember joined together via a covalent bond. A covalent bond is a hyperlink created via the sharing of electrons that holds these atoms collectively.

Learn more about substances here: https://brainly.com/question/2901507

#SPJ2

1) Both cells have a cell membrane.

2) A nucleus is present in only Eukaryote cells.

3) I'm pretty sure Prokaryote cells are bacteria.

Hope this helps!! :)

Answer:

The given reaction has been the symbolization for replacement reaction. Thus, option D is correct.

The given general reaction has been:

[tex]\rm AB\;+\;CD\;\rightarrow\;AD\;+\;CB[/tex]

In the given reaction, there has presence of compound AB and CD. The reaction between the two results in the formulation of AD and CB. In the reaction, the B has been more attracted by C and forms bond with C by replacing D.

In the same way, A has been more attracted with D and forms bond with D replacing C.

The type of reaction in which the more reactive element replaces the less reactive element has been termed as replacement reaction. Thus, the given reaction has been the symbolization for replacement reaction. Thus, option D is correct.

For more information about replacement reaction, refer to the link:

https://brainly.com/question/8625202

Answer:

V₂ = 87.24 L

Explanation:

Charle's law states that at constant pressure, the volume of the gas is directly proportional to the temperature. Its mathematical form is given by :

[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]

We have, V₁ = 75, T₁ = 245 K, T₂ = 285, V₂ = ?

Putting all the values, we get :

[tex]V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{75\times 285}{245}\\\\V_2=87.24\ L[/tex]

So, the new volume is 87.24 L.

Answer:

c

Explanation:

Answer:

The answer is "Option a".

Explanation:

Multiply the mass of the solutions by 3.17% to get the mass of [tex]BaCl_2[/tex]:

[tex]\to 427 \ g \times 0.0317 = 13.56\ g[/tex]

Divide this mass with BaCl2's molecular concentration to acquire the mole ratio:  

[tex]molar mass = 208.24 \frac{g}{mol}\\\\moles = \frac{13.56}{208.24} = 0.065 \ moles \\\\[/tex]

                       [tex]= 6.5 \times 10^{-2} \ moles[/tex]

A 427 g sample is 3.17% by mass barium chloride contains 6.5 × 10⁻² moles of BaCl₂.

A 427 g sample is 3.17% by mass barium chloride, that is, there are 3.17 g of barium chloride per 100 g of sample.

The mass of barium chloride in 427 g of the sample is:

[tex]427gSample \times \frac{3.17gBaCl_2}{100gSample} = 13.5gBaCl_2[/tex]

We can calculate the number of moles in 13.5 g of barium chloride using its molar mass (208.23 g/mol).

[tex]13.5 g \times \frac{1mol}{208.23g} = 6.5 \times 10^{-2} mol[/tex]

A 427 g sample is 3.17% by mass barium chloride contains 6.5 × 10⁻² moles of BaCl₂.

Learn more: https://brainly.com/question/12127540

Answer:

The sun's light is blocked by the moon.

Explanation:

During the eclipse, the moon rotates right in front of the sun, that's why the eclipse is so rare and only happens every four(?) years/

Answer:

The answer is true

Explanation:

bc I took this on edgeunity

Answer:

Reductions in available food and shelter

Explanation:

To solve this we must be knowing each and every concept related to population. Therefore, organisms in over-populated areas do not survive well due to reduction in available food and shelter.

The group of people from whom a quantitative sample is gathered for a research is referred to as a population. Therefore, a population is any collection of people who have anything in common.

A sample is a representative group of a population chosen at random. This is a smaller group that was selected from the population and possesses all of the population's traits. The observations and inferences drawn from the sample data then applied to the entire population.

Therefore, organisms in over-populated areas do not survive well due to reduction in available food and shelter.

To know more about population, here:

https://brainly.com/question/27779235

#SPJ5

Answer:

try dividing the grams and the volume and see what number matches up with your answer

Answer:

Ka = 4.70x10⁻⁴M

Explanation:

The general dissociation of a weak acid, HX, is:

HX(aq) ⇄ H⁺(aq) + X⁻(aq)

And Ka is written as:

Ka = [H⁺] [X⁻] / [HX]

Where [] represents the molar concentration in equilibrium of each specie.

The equilibrium is reached when X of HX is dissociate in X H⁺ and X X⁻, that is:

[HX] = 0.0129M - X

[H⁺] = X

[X⁻] = X

As pH = -log [H⁺]:

10^-pH = [H⁺] = X  = 2.239x10⁻³M

Solving:

[HX] = 0.0129M - 2.239x10⁻³M = 0.01066M

[H⁺] = 2.239x10⁻³M

[X⁻] = 2.239x10⁻³M

Ka = [H⁺] [X⁻] / [HX]

Ka = [2.239x10⁻³M] [2.239x10⁻³M] / [0.01066M]