Answer:
acid turns blue litmus red and base turns red litmus blue
Answer:
turns red or pink if it is acid and turns green if it is a base
Explanation:
litmus paper is blue
Parts of mixture
a / can not be separated
b/ have new properties after they are mixed
C/ form achemicl combination of two or more atoms
Answer:
B- Have new properties after they are mixed
I hope this helps
4. Advection fog forms when warm moist air comes in from the Pacific Ocean and
blows over the cold California current.
A.True
B.False
Answer:
A, True
Explanation:
How many significant figures does this measurement contain? 0.0000508800 Gm
Answer:
There are 6 significant figures
Answer:
6 significant figures
Explanation:
When counting significant figures, start on the left with the first non-zero number. Count all numbers that fall between non-zero numbers. Count all zeros after a 1-9 and after the decimal.
Answer question number 3
?
The group number tells the number of
Elements in the column
Number of valence electrons
O Number of energy levels
O Number of protons in the elements
Answer:
number of valence electrons
Explanation:
elements in the same group has same number of valence electrons
Please help me, I am struggling please help
change word equation into chemical equation.
a Calcium carbonate -----> Calcium oxide + Carbon dioxide
b Zinc + Sulphuric acid -----> Zinc sulphate + Hydrogen
Answer:
Ca(CO3) --> CaO + CO2
Zn + H2SO4 --> ZnSO4 + 2H2
Explanation:
^^^
Match each description to a type of radiation Drag each item to the appropriate bin.
Answer:
Explanation:
Beta radiations:
mass 1/200 , charge -1, medium penetration
Beta radiations are result from the beta decay in which electron is ejected.
The mass of beta particle is smaller than the alpha particles.
They can travel in air in few meter distance.
These radiations can penetrate into the human skin.
The sheet of aluminum is used to block the beta radiation
Properties of alpha radiation:
mass 4 amu, charge +2, least penetration
Alpha radiations are emitted as a result of radioactive decay. The atom emit the alpha particles consist of two proton and two neutrons. Which is also called helium nuclei. When atom undergoes the alpha emission the original atom convert into the atom having mass number less than 4 and atomic number less than 2 as compared to parent atom the starting atom.
Alpha radiations can travel in a short distance.
These radiations can not penetrate into the skin or clothes.
These radiations can be harmful for the human if these are inhaled.
These radiations can be stopped by a piece of paper.
Gamma radiations:
mass 0, charge 0, deepest penetration
Gamma radiations are high energy radiations having no mass.
These radiations are travel at the speed of light.
Gamma radiations can penetrate into the many materials.
These radiations are also used to treat the cancer.
Lead is used for the protection against gamma radiations because of its high molecular density.
The lead apron are used by the person when treated with gamma radiations.
Can someone please help me
Joe bought a roll of gray duct tape containing 5400 inches. If there are 5280 feet in a mile, how
many miles long is Joe's roll of duct tape?
Answer:
STANDARD: 0.085 mi, 450 ft, or 150 yds
METRIC: 0.137 km, 137.16 m, or 13716 cm
Explanation:
How many moles of gold, a U, are in 3.60×10^-5 G of gold?
Answer:
See Below.
Explanation:
This is a conversion problem:
Using the molar mass of Gold (given in a periodic table) which is 196.97g/mol
you have
[tex](3.60*10^-5 g) *\frac{1moles}{196.97g}[/tex]
you always arrange the equation in a way to cancel whatever you don't want (grams) and leave what you do want (moles). Here grams cancel (top and bottom), so you're left with:
[tex]\frac{(3.60*10^-5 g) *(1)}{196.97} = 1.83*10^-7[/tex] moles of Gold
Choose all the answers that apply. lonic compounds ___.
A. do not dissolve in water
B. have high melting points
C. have low melting points
D.dissolve easily in water
E. conduct electricity when melted
(science class not chemistry)
Answer:
E conduct electricity when melted
Explanation:
They can not produce electricity until dissolved/ melted in water
Which types of reactions would result in the formation of precipitate?
Answer:
Double Displacement Reaction
Explanation:
A double displacement reaction is a type of chemical reaction in which the reactant ions exchange places to form new products. Usually, a double displacement reaction results in precipitate formation.
What is the difference between the crest and the trough of a wave?
Answer:
Trough is the lower bound of wave, while the crest is the upper bound of a wave.
Explanation:
see picture attatched
The ___ has many functions; one is to regulate growth.
Growth hormon somatotropin
Which of the following is considered a sign of a chemical change?
Explain why the several different types of microscopes are all necessary.
Answer:
some zoom in farther
Explanation:
some microscopes zoom in farther than others so we can see even smaller things
Which of these reactants will produce a precipitate if they react?
NaC2H3O2+ HCI
NaOH + HCI
NaNO3 + CaCl2
KOH + Mg(NO3)2
Answer:
KOH+Mg(NO3)2
Explanation:
The double replacement reaction will result in:
2KOH(aq) + Mg(NO3)2[tex]\\[/tex](aq)--> 2KNO3(aq) + Mg(OH)2(s)
Solubility rules prove that Mg+OH^- is insoluble and will result in a precipitate (solid)
Can an Atom be broken down into a smaller substance? Yes or No Explain.
Answer:
Yes
Explanation:
A atom is made out of 3 elements, protons which are positive charges, electrons which are negative charges that swirl around the atom, and a neutron with a neutral charge. The nucleus of the atom is basically the center of the atom.
Which of the following elements has the largest electronegativity? A) Bismuth B) Nitrogen C) Potassium D) Arsenic
Kayla’s teacher gave each lab group three liquids and asked them to test their pH. Kayla tested each one and recorded her results in the chart below.
She then combined the liquids and tested again. She combined liquid C and D and the resulting pH was 7.
Which statement BEST describes the process that took place when liquid C and D were combined?
F) D. The solution would be slightly acidic.
G) C. The acid and base would neutralize to form a salt.
H) A. The acid and base would neutralize to form an element.
I) B. The solution would be slightly basic.
Answer:
A. The acid and base would neutralize to form an element.
Answer:
egc jnpz rof join it on google meet
3. Which of the following is NOT an abiotic factor in an ecosystem?
Air pressure
Bacteria
Sunlight
Water
#7- pls help me ill mark you brainliest and ill give you 5 stars <3
Answer:
I think it is synthesis
Answer:
The answer is Synthesis
Explanation:
The two objects combine to make a bigger object
Classify the following reactions and complete the given below
A) NaCl + AgNO3 - NaNO3 + AgCl
Answer:
chemical equation balance.
Explanation:
if you need more explanation , comment.
What will the coefficients be for the following balanced equation? (a) N2 + (b) H2 → (c) NH3
Answer:
his reaction is the synthesis of Ammonia using Nitrogen and Hydrogen gas.
N
+
H
→
N
H
3
We must remember that Nitrogen and Hydrogen are both diatomic molecules in their standard gas form. This adjusts the equation to
N
2
+
H
2
→
N
H
3
Now we need to adjust coefficients in order to balance the atoms on each side of the equation. Currently we have 2 atoms of nitrogen and 2 atoms of hydrogen on the reactant side and 1 atom of nitrogen and 3 atoms of hydrogen on the product side.
We can balance the hydrogens by placing a coefficient of 2 in front of ammonia and a coefficient of 3 in front of the hydrogen.
N
2
+
3
H
2
→
2
N
H
3
This gives us 6 hydrogen on each side and coincidentally the nitrogens now equal 2 on each side.
I hope this was helpful.
Explanation:
Answer:
1N2 + 3H2 →2NH3
Explanation:
Plato answer
Diffusion of Ammonia in an Aqueous Solution. An ammonia (A)-water (B) solution at 278 K and 4.0 mm thick is in contact at one surface with an organic liquid at this interface. The concentration of ammonia in the organic phase is held constant and is such that the equilibrium concentration of ammonia in the water at this surface is 2.0 wt 'Yo ammonia (density of aqueous solution is 991.7 kg/m3) and the concentration of ammonia in water at the other end of the film 4.0 mm away is 10 wt % (density of 961.7 kg/m3). Water and the organic are insoluble in each other. The diffusion coefficient ofNH3 in water is 1.24 x 10- 9 m 2/sCalculate the flux N_B. Explain.
Answer:
The Flux N_B = 0
Explanation:
So, we are given the following set of data or parameters which is going to help in solving this particular Question. So, let us take each at a time;
=> "An ammonia (A)-water (B) solution at 278 K and 4.0 mm thick is in contact at one surface with an organic liquid at this interface."
=>" 2.0 wt 'Yo ammonia (density of aqueous solution is 991.7 kg/m3) and the concentration of ammonia in water at the other end of the film 4.0 mm away is 10 wt % (density of 961.7 kg/m3). ''
With the information above, we can determine the N_A(which the question did not specify that we should calculate).
For the value of N_B, it will be equals to zero(0) because the insolubility of water in organic solvent.
Assume that the pendulum clock shown in the photograph is a closed
system
Which statement describes evidence that the pendulum's energy is conserved
even as it eventually stops moving?
A. Energy must be added to the pendulum to keep it from slowing
down
B. Some of the clock's matter is transformed into new energy
C. The amount of each type of energy in the system can be
measured
D. All its mechanical energy is transformed into other forms of
energy
Answer:
Explanation:
d
Answer:
D. All it’s mechanical energy is transformed into other forms of energy.
Explanation:
I got it right
How many moles are in 5.25 X 10 25
atoms of Au?
Answer:
The answer is 87.21 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{5.25 \times {10}^{25} }{6.02 \times {10}^{23} } \\ = 87.2093023...[/tex]
We have the final answer as
87.21 molesHope this helps you
#8- please help i suck at this, ill mark brainliest
Answer:
A. Synthesis
B. Combustion
C. Single-replacement
D. Decomposition
Explanation:
A: Synthesis. Two reactants are combined to form, or synthesize, one product.
B: Combustion. This is the general reaction for combustion. When something combusts, oxygen must be present. Carbon dioxide and water must also be produced.
C: Single-replacement. The oxygen from Fe₂O₃ is moved to K to form K₂O. Only one thing is being moved, or replaced.
D: Decomposition. You have one compound that breaks into, or decomposes, into two products.
This illustration is an example of a
The illustration is an example of surface waves.