Metal- magnesium
Appearance of metal-?
Reactant- hot water
Observation of reaction-?

The order of activity from most active to least active in the given scenario is: zinc, iron, lead. This is because zinc is the most active element in the group, as it has the least number of valence electrons.

making it more likely to participate in chemical reactions and replace other elements. Iron is the next most active, as it has a higher number of valence electrons than zinc, but still fewer than lead, which is the least active element in the group due to its high number of valence electrons, making it less likely to participate in chemical reactions and replace other elements.A chemical element with the atomic number 30 and the symbol Zn is zinc (Zn). It belongs to the periodic table's group 12 and is a transition metal. A bluish-white, glossy metal with high conductivity for electricity, zinc is a substance. It reacts with oxygen and water to produce zinc oxide (ZnO) and zinc hydroxide (Zn(OH)2) due to its comparatively high reactivity. Brass manufacture, galvanizing (coating steel or iron to prevent corrosion), and alloying other metals all utilize it often.

learn more about zinc   here:

https://brainly.com/question/13890062

#SPJ4

44.59844.6 g of silver metal will be deposited when the reaction is fully completed.

Weight of Ag metal contained in 70.2 g of AgNO3 = 108/170 x 70.2 = 44.598 g Equivalent mass of Copper = 63.54/2= 31.77 g Equivalent mass of Silver(Ag)= 108/1

[From the aforementioned information, we learn that AgNO3 is the LIMITING AGENT]

As a result, 44.59844.6 g of silver metal will be deposited when the reaction is fully completed.

[Note: When one equivalent mass of copper, or 31.77 g, dissolves in the solution, one equivalent mass of silver, or 108 g, is deposited at the cathode.

Learn more about sliver here:

https://brainly.com/question/6434391

#SPJ4

A phylogenetic tree constructed from gene sequence data is based on similarities in, the correct option is (D) nucleotide substitutions in homologous genes.

Phylogenetic tree are constructed from gene sequence data by comparing the sequences of homologous genes (genes that have a similar function and evolutionary origin) from different organisms. The similarities and differences in the nucleotide sequences of these genes are used to infer evolutionary relationships among the organisms. The tree is built based on the principle of common descent, which states that organisms that share a common ancestor will have more similar gene sequences than those that do not. By comparing the sequence similarities and differences, it is possible to infer the evolutionary relationships among different organisms and construct a branching diagram, known as a phylogenetic tree, that illustrates these relationships.

To know more about phylogenetic tree please refer: https://brainly.com/question/13577065

#SPJ4

Makes the eluent more polar is the correct option.this is the purpose which is most used for TLC method.TLC means thin-layer chromatography.

Non-volatile mixtures can be separated using the chromatography technique known as thin-layer chromatography (TLC). A sheet of an inert substrate, such as glass, plastic, or aluminum foil, is used for thin-layer chromatography. This substrate is covered with a thin layer of an adsorbent material, often silica gel, aluminum oxide (alumina), or cellulose. To elute more strongly retained solutes, an increase in eluent strength is necessary. RP-HPLC (raise organic, create more non-polar) (increase organic, make more non-polar). NP-HPLC (increase solvent to make more polar) (increase solvent to make more polar) For many separations, eluent strength gradients (gradual changes) are utilized. When polar compounds are induced to be more attracted to the mobile phase by a moderately polar eluent, the equilibrium shifts and the compound spends more time in the mobile phase, increasing the R f.

leqarn more about thin-layer chromatography refer:brainly.com/question/13483325

#SPJ4

Any substance that is burned in a flame emits a distinctive hue. Knowing the sort of cation present in the compound will allow us to forecast the color of the flame.

Based on the results of the flame test, the provided sweeteners can be separated from one another.

• Equal, an artificial sweetener, is made of a non-ionic molecule (C14H18N2O5). It has no cations at all. It won't exhibit any color in the flame test as a result.

Ace-K sweetener contains the K+ ion as its cation. Ace-K emits a lilac-colored flame as a result of the K+ ion's existence.

• The cation in Sweet 'N Low is the Ca2+ ion. Sweet 'N Low produces a flame that is brick-red in color due to the presence of Ca2+ ions.

To learn more about flame tests:

https://brainly.com/question/28715571

#SPJ4

electron part of an atom exists in orbitals surrounding the nucleus.

The orbitals or shells that enclose an atom's nucleus are home to electrons. In the nucleus, protons and neutrons are present. In the atom's nucleus, they coalesce. An atom's nucleus is surrounded by electrons in distinct orbits. At whatever distance from the nucleus, electrons cannot just exist. The levels of these orbits are numbered 1, 2, 3, and so forth, with level 1 being the orbit closest to the nucleus. Take a look at the illustration on the right. Two electrons are contained in each orbital, and each has a unique spin. An atom's orbital is a pocket of space where an electron belonging to a certain subshell can be found.

What part of an atom exists in orbitals surrounding the nucleus?

A. electron

B. photon

C. neutron

D. proton

Learn more about electron here:

https://brainly.com/question/1255220

#SPJ4

Bronze is an alloy composed primarily of copper and tin.

It is believed that early man began experimenting with making bronze because the combination of these two metals produced a material that was harder and stronger than either of the individual metals.

This allowed early man to make better tools, weapons, and other items that were essential for survival.

The discovery and use of bronze represented a major step forward in human technological development and helped to shape the course of human history.

Read more about bronze here:

https://brainly.com/question/25922261

#SPJ1

The mass of one mole of hydrogen gas (H₂) is 2 g/mol. Then, the mass of 18.06 moles of hydrogen gas is 36.12 g.

One mole of any substance contains 6.02 × 10²³ atoms. This number is called Avogadro number. Thus, one mole of every elements contains Avogadro number of atoms.

Similarly one mole of a compound contains Avogadro number of molecules. Hydrogen normally exists in the molecular state H₂ as hydrogen gas.

Molecular mass of H₂ = 2 g/mol.

given number of moles = 18.06 moles.

mass of hydrogen gas = number of moles × molecular mass

mass = 18.06 × 2 = 36.12 g.

Therefore, the mass of 18.06 moles of hydrogen gas is 36.12 g.

Find more on hydrogen gas:

https://brainly.com/question/11426882

#SPJ1

Answer: Caesium

Explanation:

Caesium has the lowest ionization energy. With the lowest ionization energy, it is the one that will most easily give up electrons.

Answer: cesium

Explanation:(cs)

If the kinetic and potential energies of a liter of oxygen molecules are 250 j and 1200 j, respectfully, it is likely that the liter of oxygen molecules is in a gaseous phase.

According to the passage, the kinetic and potential energies of a liter of oxygen molecules are 250 J and 1200 J, respectively. Kinetic energy is the energy of motion, and potential energy is the energy stored in an object due to its position or configuration. Therefore, it is likely that the liter of oxygen molecules is in a gaseous phase. Gases have high kinetic energy and relatively low potential energy because their molecules are in constant motion and have more distance between them, resulting in weaker intermolecular forces. It's worth noting that the kinetic energy alone is not enough to determine the phase of the substance, as it can be in any of the three states of matter (solid, liquid, and gas) and the potential energy alone is not enough as well. The phase of the substance can be determined by comparing the kinetic and potential energies, and other thermodynamic parameters such as temperature, pressure, and volume.

So, based on the given information the liter of oxygen molecules is most likely to be in gaseous phase.

To know more about oxygen please refer: https://brainly.com/question/13370320

#SPJ4

Some factors that affect the design of concert halls and movie theaters are:

1. Acoustic characteristics: Acoustic characteristics, such as sound reflection, reverberation, and sound absorption, must be considered in the design of music halls and movie theaters. This is essential to guaranteeing the best possible audio clarity and quality, both for live performances and recorded audio.

2. Seating capacity: The number of seats in a theater or concert hall has a significant impact on the space's overall design. The audience's viewing and listening experiences will be impacted by the seating arrangement and the number of rows.

3. Lighting: The design of the lighting in concert halls and movie theaters is crucial since it can change the environment's ambience. Different moods and effects can be produced by specialized lighting systems, such as spotlights for live performances or low lighting for movies.

4. Sound and projection equipment: The positioning and functionality of sound and projection equipment, such as speakers, amplifiers, and projectors, must be considered when designing concert halls and movie theaters. For the best possible sound and image quality, this is crucial.

5. Accessibility: Many concert halls and movie theaters are designed with accessibility in mind, such as ramps, elevators, and accessible seating for people with disabilities. This is important to ensure that all members of the community have the opportunity to enjoy live performances and films.

To learn more about halls and movie theaters:

https://brainly.com/question/2555262

#SPJ4

As a result, when you enter your pertinent values, you get:E = -891 * 1.65 E = -1470.15 kJ.

The following results are obtained after entering the data into the formula:

((2*-238) + -394)

- [-75 + (2*0)]

H(reaction)=-891 kJ/mol

Now you need to find the kJ value for 1.65 mol.

You use the following standard formula:

Where E is energy expressed in kJ, E is equal to (reaction) * mol.

As a result, when you enter your pertinent values, you get:

E = -891 * 1.65 E = -1470.15 kJ

To learn more mass refer

https://brainly.com/question/6685683

#SPJ1

The solubility product constant (Ksp) of calcium sulfate (CaSO4) and the idea of ion product may be used to determine the solubility of calcium sulfate (CaSO4) in 0.30 M aqueous sodium sulfate.

(Na2SO4). The calcium ion (Ca2+) concentration in the solution. may be estimated as follows: [Ca2+][SO42-] = Ksp [Ca2+][SO42-] = 2.0 x 10^-5 When there is sodium sulfate present, part of the sulfate ions will originate from the sodium sulfate rather than the calcium sulfate. The total sulfate ion concentration (SO42-) in the solution may be determined as follows [SO42-] = [Na2SO4] + [CaSO4] + x = 0.30 M (where x is the concentration of CaSO4) When we enter the values into the Ksp expression, we get: 2.0 x 10^-5 = [Ca2+] [0.30 M + x] x [0.30 M + x] = [Ca2+] x [0.30 M + x] [Ca2+] = (2.0 x 10^-5) / (0.30 M + x) We may substitute [Ca2+] in the Ksp equation since [Ca2+] = [CaSO4]: ([CaSO4])2 / (0.30 M + [CaSO4]) = 2.0 x 10-5 This equation may be solved for [CaSO4,] which yields the calcium sulfate solubility in 0.30 M aqueous sodium sulfate solution.

learn more about solubility  here:

https://brainly.com/question/29661360

#SPJ4

Kinetic energy is the energy an object possesses due to its motion. The amount of kinetic energy an object has is directly proportional to the mass of the object and the square of its velocity.

Without any specific information about the mass of the object or its velocity at each position, it's impossible to determine which position has the most kinetic energy. The kinetic energy will depend on the mass and velocity of the object at each position, and without that information it's impossible to compare the kinetic energy of each position.

If we add 25.6 g of an unknown molecular compound to the 0.250 kg of benzene, the molar mass of the unknown compound is 148.8 g/mol.

The Molality of the compound is given as :

ΔT = i Kf m

Where,

ΔT = freezing point depression = 3.54 °C

i =  Van't Hoff factor of the Benzene = 1

Kf =  constant of the freezing = 5.12 °C/m

m = molality = ?

m = ΔT / i Kf

m = 3.54 / 1 × 5.12

m = 0.69 mol

molality = moles / mass of benzene

moles = 0.172

The molar mass = mass / moles

The molar mass = 25.6 / 0.172

The molar mass = 148.8 g/mol

To learn more about molar mass here

https://brainly.com/question/16928753

#SPJ4

Among the compounds listed, a) CH3CH2F has the lowest intermolecular forces, meaning it has the lowest boiling point.

This is because the fluorine atom has the smallest atomic radius, meaning it has the weakest dipole-dipole interactions.

The other compounds (CH3CH2NH2, CH3CH2CH2OH, CH3CH(OH)CH3, and CH3CH2COOH) all have higher boiling points due to the fact that they have larger atomic radii, resulting in stronger dipole-dipole interactions.

This is because the fluorine atom is the smallest in size and has the strongest intermolecular force, thus giving it the lowest boiling point.

To learn more about boiling point, click here:

https://brainly.com/question/2153588

#SPJ4

Waves have energy that causes particles in matter to vibrate, which is why they can transfer energy and heat through matter.

The frequency of a wave is a degree of what number of oscillations or cycles of the wave arise in a given time period. It is measured in hertz (Hz). The electricity of a wave is associated with its frequency in that the higher the frequency of the wave, the extra electricity it contains. This is due to the fact greater oscillations according to 2nd manner that extra electricity is being transferred in a given amount of time. So, waves with better frequency have more power than waves with decrease frequency. That is why waves with high frequency like X-rays and Gamma rays are considered dangerous as they create more energy and may reason ionization, even as waves with low frequency like Radio waves are less dangerous as they bring less energy.

To know more about Frequency visit: https://brainly.com/question/5102661

#SPJ1

By dividing the energy required to increase the temperature of 1 gramme of water by 1 degree Celsius (4.2 J) by the weight of the water in theexperiment (500 g) and the number of degrees raised, the energy released during the experiment can be estimated (4 degrees).

The capacity to perform labour is energy. Kinetic energy (energy in motion), potential energy (energy stored), thermal energy (heat), electrical energy, and chemical energy are only a few of its numerous variations. These energy sources can be changed into one another. Coal, for instance, is a type of chemical energy that can be transformed into thermal energy to produce electricity. Solar panels transform solar energy into electrical energy. Although fossil fuels like coal, oil, and natural gas are still the most widely utilised types of energy today, renewable energy sources including wind, solar, hydropower, and geothermal energy are gaining importance. Because they don't release greenhouse gases or deplete scarce resources, the utilisation of renewable energy sources is crucial.

Learn morea about energy here;

https://brainly.com/question/11399976

#SPJ4

In a covalent bond between two atoms, the repulsive forces between the two positive nuclei gets cancelled out as the attractive forces between the positive nuclei and the negative electrons is more.

A covalent bond is said to be a bond formed between two atoms by the sharing of equal number of electrons present in both the atoms.

In a covalent bond, the dense electron cloud is concentrated in between the two nuclei of the atoms.

The attractive forces balance out the repulsive forces. So, If any net force is left, the atoms will still accelerate. Therefore, the forces that will pull the two atoms together must be equal to the forces that will push them apart.

To know more about covalent bond here

https://brainly.com/question/29850595

#SPJ4

It took 32.47 ml of .1224 m NaOH to reach the endpoint when titrating a sample containing .4073 g of an unknown acid.

The formula for number of moles(n) is:

n = Molarity × Volume( in liters )

n = 0.1224 x32.47 ÷ 1000 moles

n = 0.00397 Moles.

[tex]3.9 * 10 ^-3 Mol NaOH[/tex]

Sodium hydroxide is sometimes known as caustic soda or lye. It is a common ingredient in cleansers and soaps.

At room temperature, sodium hydroxide is a solid that is white and odorless. Sodium hydroxide is a liquid that has no color or smell. It can have violent interactions with water and strong acids. The corroding acid is sodium hydroxide. NaOH may heat up as it dissolves if airborne moisture reacts with it. This heat may be sufficient to start a fire if it is close to combustible materials.

Sodium hydroxide is useful because it can alter lipids. It is a crucial component of household products like liquid soap and drain cleaners. White pellets or a solution in water are the two most widely available forms of sodium hydroxide for sale.

Learn more about Heat here:

https://brainly.com/question/1429452

#SPJ4

If a burst of light had a total energy of 4.50 kJ, it can release 0.0468 moles of electrons.

This number is calculated by dividing the total energy by the energy per mole of electrons, which is equal to the Faraday constant (96,485 C/mol). In this case, the answer is approximately 0.0468 moles of electrons.

The Faraday constant is a measure of the amount of electrical charge that is released when one mole of electrons is passed through an electrical circuit.

This constant is important because it allows us to calculate how many moles of electrons can be released when a certain amount of energy is present.

By dividing the total energy of 4.50 kJ by the Faraday constant, we can determine the number of moles of electrons that can be released.

Although a part of your question is missing, you might be referring to this question:

A burst of light is being emitted through a photon.

If a burst of light described above had a total energy of 4.50 kj, how many moles of electrons can be released?

To learn more about electrons, click here:

https://brainly.com/question/1255220

#SPJ4

Answer:your mom

Explanation: your mom is the density

The mass of water in the calorimeter is 7.98 g when The temperature of the water is increased from 21. 7˚C to 56. 4˚C.

We can use the equation Q = mcΔT to calculate the heat transfer between the lead and the water.

Q is the heat transfer, m is the mass of the substance, c is the specific heat of the substance, and ΔT is the change in temperature.

The heat absorbed by the water is equal to the heat lost by the lead, so we can set the two heat transfer equations equal to each other:

Qwater = Qlead

mwater * cwater * ΔTwater = mlead * clead * ΔTlead

where mwater is the mass of the water, cwater is the specific heat of water (4.184 J/g°C), ΔTwater is the change in temperature of the water, mlead is the mass of the lead (200.0 g), and ΔTlead is the change in temperature of the lead (176.4°C - 21.7°C = 154.7°C)

We can solve for mwater by isolating it on one side of the equation:

mwater = (mlead * clead * ΔTlead) / (cwater * ΔTwater)

mwater = (200.0 g * 0.129 J/g°C * 154.7°C) / (4.184 J/g°C * 35.7°C)

mwater = 7.98 g

So the mass of water in the calorimeter is 7.98 g.

Learn more about mass here:

https://brainly.com/question/17067547

#SPJ4

The half life of uranium is 10 minutes. Then, the 48 g of uranium sample will decay to 0.21 g after 78 minutes.

Heavy unstable radioactive isotopes undergo nuclear decay by the emission of charged particles. The nuclear decay is a first order reaction.

thus, decay constant k = 1/t ln W0/Wt.

The half life time of the sample = 10 minute.

decay constant = 0.693/ t1/2

k = 0.693/10 = 0.069 min⁻¹

then,W0 = 48 g

we have to find the amount  Wt.

time of decay t = 78 min

ln 48 g/Wt =  0.069 min⁻¹ × 78 min

Wt = 0.12 g.

Therefore, the mass of uranium sample left after the decay will be 0.12 g.

Find more on radioactive decay:

https://brainly.com/question/1770619

#SPJ1

The TCA cycle, also known as the Krebs cycle or citric acid cycle, is a series of chemical reactions that occurs in the mitochondria of cells.

It is a key component of aerobic metabolism, as it generates energy in the form of ATP from the breakdown of glucose and other fuels.

When glucose labeled with 14C is fed to a cell undergoing aerobic metabolism and becomes the sole source of carbon for the TCA cycle, the cycle will incorporate the 14C label into the molecules produced during the cycle.

The TCA cycle involves a series of 8 reactions, in which one molecule of acetyl-CoA enters the cycle, and is converted into 2 molecules of CO2.

Each turn of the TCA cycle will convert 1 molecule of acetyl-CoA into 2 molecules of CO2.

When glucose labeled with 14C is the sole source of carbon for the TCA cycle, 100% of the acetyl-CoA produced from the glucose will be labeled with 14C.

So after the first turn of the TCA cycle, 100% of the 2 molecules of CO2 produced will also be labeled with 14C.

In the second turn of the TCA cycle, one of the two CO2 molecules produced in the first turn will be used to regenerate the unlabeled oxaloacetate.

The other CO2 molecule produced in the first turn will be used to form another molecule of acetyl-CoA, which will again enter the TCA cycle and produce two new molecules of CO2.

So after two turns of the TCA cycle, 50% of the CO2 produced will be labeled with 14C.

This is because one of the two CO2 molecules produced in the first turn will be used to regenerate the unlabeled oxaloacetate, and the other will enter the TCA cycle again.

It's important to note that this is a simplified version of the TCA cycle, in reality, different cells have different levels of metabolic flux and different mechanisms that might contribute to the dilution of the labeled molecules.

To know more about Mitochondria,

https://brainly.com/question/15159664

#SPJ4

Answer:

increase environmental problems

The molecular formula from percent composition and empirical formula is C₅H₁₀O.

Empirical formula of a compound is defined as the simplest whole number ratio of atoms which are present in a compound.

Molecular formula is determined from the empirical formula by dividing the molar mass of a compound by the empirical formula mass. The resultant which should be a whole number or very close to the whole number , then the subscripts are multiplied by the whole number to get the molecular formula.

Here, for C= 69.8/12=5.82/1.16=5

for O= 18.6/16=1.16/1.16=1

for H=11.6/1=11.6/1.16=10

Thus, the  the molecular formula of this ester is C₅H₁₀O.

Learn more about empirical formula,here:

https://brainly.com/question/14044066

#SPJ1

For a soil that contains 0.5 solids, 0.35 air, and 0.15 water in its volume fraction, the air/soil partition coefficient for benzene and trichloroethylene is 3.33.

Benzene is an organic compound with the molecular structure C6H6. The benzene molecule is made up of six carbon atoms joined to one another in a planar ring and one hydrogen atom coupled to each one. Due to its pure carbon and hydrogen atom composition, benzene is a hydrocarbon. In fluid mechanics and chemistry, the volume fraction is the ratio of a constituent's volume to the sum of all the other constituents' volumes.

0.5/15 = 3.33 is the benzene coefficient.

coefficient for benzene = 0.5/0.15 = 3.33

Learn more about molecular structure here

https://brainly.com/question/503958

#SPJ4

Covalent compounds are composed of molecules that are held together by the sharing of electrons, while ionic compounds are held together by electrostatic forces between positively and negatively charged ions due to which the melting and boiling points of covalent compounds are usually lower than those of ionic compounds.

Because covalent bonds involve the sharing of electrons, the molecules in covalent compounds are held together more loosely than those in ionic compounds.

This looser bonding structure causes the melting and boiling points of covalent compounds to usually be lower than those of ionic compounds.

The lower melting and boiling points can be attributed to the weaker bonds between the molecules in covalent compounds, which require less energy to break and reform.

Covalent compounds are composed of molecules, which are formed by atoms sharing electrons. This sharing of electrons creates strong bonds between the atoms, making the molecules less stable than the ions in ionic compounds.

To learn more about ionic, click here:

https://brainly.com/question/14614762

#SPJ4