First, you need to find out the speed of 6x10^10. Then find out the value of 3x10^30 after you do that, Make this visual,
3x10^30. 5x10 to the 19 power
_______.
6x10^10
The answer is c
If the spaceship travels a distance of 6 × 10¹⁰ kilometers with an average speed the time taken to travel 3 × 10³⁰ kilometers is 5 × 10¹⁹ years. Thus, option a is correct.
What is speed?Speed is a physical quantity associated with a moving body. It is the measure of distance travelled per unit time . Thus, mathematically it is the ratio of distance to the time.
If we have the time and speed known we can find the distance travelled and vice versa. As the speed increases, the distance covered per unit time will be higher.
Here the spaceship travels 6 × 10¹⁰ kilometers . Thus the time taken to travel 3 × 10³⁰ kilometers can be calculated as follows:
1 year - 6 × 10¹⁰ km
? - 3 × 10³⁰ km
Cross multiply them we get, 3 × 10³⁰ km/ 6 × 10¹⁰ km = 5 × 10¹⁹ years.Hence, option a is correct.
To find more about distance of travel, refer the link :
https://brainly.com/question/13258147
#SPJ5
PLEASE HELP MEEEEE 80 points on the line and i need this done
Answer:
5) A 200n
F net=0n
6) B 50n
F net=0n
7) C 200n
F net= 900n, up
8) D 80n
F net=60n,left
9) E 300n
F net=60n,left
10)???
11) G 20n
F net=30n,Right
__________________________________
All the answers is hard
correct me if i'm wrong
how to tell a girl you like her?
What event will produce the greatest increase in the gravitational force between the two masses?
Question 5 options:
Doubling the distance between the masses
Reducing the small mass by half
Doubling the large mass
Reducing the distance between the masses by half
Answer:
Doubling the large mass
Explanation:
By doubling the mass you will get more gravational force
which is the hottest and coldest planet in solar system ?
Answer:
hottest plant: vensus, close to the sun
coldest plant: Neptune, farthest from the sun
Explanation:
_____________ is the study of movement in athletes. A. Sports biomechanics B. Posture C. Dynamics D. Anatomy
Answer:
I believe its A: Sports biomechanics.
HELPPP PLEASE
1) if the distance between two masses are 15 meters and the masses are 350kg and 492 kg
respectively; what is the magnitude of gravitational force?
Answer:
-8
5.092×10
Explanation:
given,
distance (d) =15m
mass (M1) =350kg
mass(M2) = 492kg
Gravitational constant (G)=6.67×10^-11
we know,
gravitational force=(Gm1m2)÷d^2
=(6.67×10^-11×350×492)÷15^2
= (1.14857×10^-5)÷225
= 5.092×10^-8
If the western component of the wind is half of the south, what is the angle of the wind with the south?
Answer this question in details!
Answer is 26.57 or tan^-1 (1/2) or cot^-1 (2)
no links !
Answer:
This above a triangle that models our situation.
Explanation:
We have a two componens., since we have a western componet and southern component. One travel in a southern direction. and the other travel in the west.
Let the component that travel in the south be the length of a.
According to the problem, the westard component is half of that so let that length be a/2.
Now we must find the angle of the wind in the South.
This means that what is angle that is opposite of the western componet because that angle is the most southward angle. So know we apply the tan property.
[tex] \tan(x) = \frac{opp}{adj} [/tex]
Our side opposite of the angle we trying to find is the western component and the side adjacent to it is the southern component. Also remeber since western and Southern negative displacements, we have
[tex] \tan(x) = \frac{ - \frac{a}{2} }{ - a} [/tex]
[tex] \tan(x) = - \frac{a}{2} \times - \frac{1}{a} = \frac{1}{2} [/tex]
Now we take the arctan or inverse tan of 1/2.
[tex] \tan {}^{ - 1} ( \frac{1}{2} ) = 26.57[/tex]
Based on the information about vector components and graph provided, the angle of the wind with the south is 26.57°.
What are the values of the western and southern component of the wind?The western and southern component have a negative displacement as shown in the graph.
Let the southern component be -x
The western component is half of -x = -x/2
What is the angle of the wind with the South?Since the angle is with the south, the trigonometric ratio to be used to find the angle is:
Tan θ = opp/adjTan θ = -×/2 /-x
Tan θ = 1/2
θ = tan^-1(0.5)
θ = 26.6°
Therefore, angle of the wind with the south is 26.57°.
Learn more about about vector components at: https://brainly.com/question/8043832
Which of the following devices can be red to produce both transverse and
longitudinal waves?
1o) a string
(b) a ripple tank
(c) a helical spring (Slinky (d) a tuning fork
Answer:
Slinky is the correct answer.
Paint is an example of which of these?
compound
heterogeneous mixture
homogeneous mixture
none of the above
Answer:
Homogenous Mixture
Explanation:
The composition in paint is uniform so every part of it looks the same throughout the paint.
c. Two persons A and B are pushing a block from opposite sides with
force of 5N and 6N respectively.
[3]
i) Find the magnitude of the resultant force on the block.
ii) Find the direction of resultant force with respect to A and B.
Answer:
1 N
Explanation:
1) You'll just have to sum the force vectors, and since they are opposite, you'll calculate the difference of their magnitudes, in absolute value.
Ftot = |F1 - F2| = 6N - 5N = 1N
2)The direction will be the same as the greater force's direction.
☆ Correct and rewrite the following statements:
a). Rubber is a good conductor of electricity.
b). Electroplating wastes are useful to human health and environment.
c). In an LED bulb, the shorter lead connected to the positive terminal of the battery.
d). pure water conducts electricity.
_______________________
#No spam
#No Internet answers, please
#Explanation needed
Answer:
a) Question:-Rubber is a good conductor of electricity. Answer:-It's incorrect sentence.As we know that, rubber are an insulators of electricity, and they do not not have free ions which can help in conducting electricity.So correct sentence is:
Rubber is a bad conductor of electricity.b)Question:-Electroplating wastes are useful to human health and environment.Answer:-It's incorrect sentence. As we know that, electroplating of substances releases harmful and toxic substances into the environment causing serious health issues in human, so it's waste substances released into environment can have very harmful effects.So correct sentence is:
Electroplating wastes are harmful to human health and environment.c)Question:-In an LED bulb, the shorter lead is connected to the positive terminal of the battery.Answer:-It's incorrect sentence. As we know that, in an LED bulb their are two terminals that is the positive and the negative. So here the lead connected to the positive terminal is always slightly longer than the lead connected to negative terminal of the bulb.So correct sentence is:
In an LED bulb, the longer lead is connected to the positive terminal of the battery.d)Question:-Pure water conducts electricity.Answer:-It's incorrect sentence. As we know that, pure water is a form of H2O where Hydrogen (H) is positive ion and Oxygen (O) is a negative ion which can conduct electricity when they are in individuals but as in pure water they are in combined form of compound H2O in which they become neutral and can't conduct any electricity.So correct sentence is:
Pure water can't conduct electricity.Which branch of science deals with the study of the structures shown here?
FISH
AMPHIBIAN
REPTILE
BIRD?
Answer:
Vertebrate zoology
Explanation:
Have a great day!
I need help to build a mouse trap race car for my science class and this is my final and these are the materials I have.
So, your science teacher has given your class the classic "mousetrap car" assignment: to make, design, and build a small vehicle powered by the snapping action of a mousetrap to make your car travel as far as possible. If you want to come out ahead of all the other students in your class, you'll need to make your car as efficient as possible so you can squeeze every last inch out of your "car". With the right approach, it's possible to streamline your car's design for maximum distance using only common home materials. You could also buy a mousetrap car kit from any craft store and skip wondering if it will work.
Use large rear wheels. Large wheels have greater rotational inertia than small wheels. In practice, this means that once they start rolling, they're harder to stop rolling. This makes large wheels perfect for distance-based contests — theoretically, they'll accelerate less quickly than smaller wheels, but they'll roll much longer and they'll travel a greater distance overall. So, for maximum distance, make the wheels on the drive axle (the one the mousetrap is tied to, which is usually the rear one) very large. The front wheel is a little less important — it can be large or small. For a classic drag racer look, you'll want big wheels in the back and smaller ones in front.
Use thin, light wheels. Thinner wheels have less friction and may go farther if the distance is what you want or need with your mousetrap racer. It's also important to take the weight of the wheels themselves into account — any unneeded weight will ultimately slow your car down or lead to added friction. In addition, it's worth noting that wide wheels can even have a small negative effect on the car's drag due to air resistance. For these reasons, you'll want to use the thinnest, lightest wheels available for your car.
Old CDs or DVDs work fairly well for this purpose — they're large, thin, and extremely light. In this case, a plumbing washer may be used to reduce the hole size in the middle of the CD (to fit the axle better).
If you have access to old vinyl, these also work extremely well, though they may be too heavy for the smallest mousetraps.
Use a narrow rear axle. Assuming your car is a rear-wheel-drive car, each time your rear axle turns, the rear wheels turn. If your rear axle is extremely skinny, your mousetrap car will be able to turn it more times for the same length of string than it would if it were wider. This translates to turning your rear wheels more times, meaning greater distance! For this reason, it's a wise idea to make your axle out of the skinniest material available that can still support the weight of the frame and wheels.
Narrow wooden dowel rods are a great, easily-accessible choice here. If you have access to thin metal rods, these are even better — when lubricated, they usually have less friction.
Create traction by giving the edges of the friction of the wheels. If the wheels slip against the ground when the trap is sprung, energy is wasted — the mousetrap works to make the wheels turn, but you don't get any extra distance. If this happens with your car, adding a friction-inducing material to the rear wheels may reduce their slippage. To keep your weight requirements down, use only as much as is necessary to give the tips of the wheels some grip and no extra. Some suitable materials are:[1]
Electrical tape
Rubber bands
Additionally, placing a piece of sandpaper under the rear wheels at the start line can reduce slippage as the car begins to move (when it is most likely)
Your father bought you a pair of shoes. When you wore the shoes you realized there was a problem. The shoes were too long. Why might such prblm arise and how can it be mitigated?
Please answer it soon as possible
Answer: This problem may arise when your father never bought a shoe before. A male is bad at buying accesories and guessing the size, so the mother should have bought a pair of shoes. Or it can also be that your father has a short term memory or that he never knew the size of your feets. The feet might also have irregular growth for which it grows more than the normal size but such cases are rare to be seen.
You can prevent this by going with your father and selecting the shoe of your size. Or you can simply send your mother to buy it for you instead. Or another perfect choice could be is that you just dont ever send your father to buy anything for you or just never buy a pair of shoes. Wear the shoes that you always did or buy it yourself since your the one who is supposed to know the size of your feets. Another possible solution could be that you can make use of the money by gifitng them to someone close to you.
An automobile with a mass of 1250 kg accelerates at a rate of 4 m/sec2 in the forward direction. What is the net force acting on the automobile?
[tex]\large{\underline{\underline{\maltese{\pink{\pmb{\sf{ \; Question \; :- }}}}}}}[/tex]
An automobile with a mass of 1250 kg accelerates at a rate of 4 m/sec² in the forward direction. What is the net force acting on the automobile?
_________________________________________
[tex]\large{\underline{\underline{\maltese{\green{\pmb{\sf{ \; Given\; :- }}}}}}}[/tex]
➢ Mass of the automobile = 1250 kg➢ Acceleration of the body = 4m/sec²_________________________________________
[tex]\large{\underline{\underline{\maltese{\orange{\pmb{\sf{ \; To \: Find \; :- }}}}}}}[/tex]
Net force acting on the automobile = ?_________________________________________
[tex]\large{\underline{\underline{ \bigstar{{\pmb{\sf{ \; Concept \: and \: Formula \: Used \; :- }}}}}}}[/tex]
➯ Force is defined as the product of the mass of the body and its acceleration.
[tex] \bigstar \: \small{ \fbox {\textsf {\textbf{F = ma}}}}[/tex]
Where :
F = Force m = Mass of the bodya = acceleration due to gravity[tex]\large{\underline{\underline{ \bigstar{{\pmb{\sf{ \; Substituting \: the\: Given\: Values :- }}}}}}}[/tex]
[tex]⇝ \: \: \small \textsf {\textbf{ F = (1250 × 4) N }}[/tex]
[tex]⇝ \: \: \small \textsf {\textbf{ F = 5000 N }}[/tex]
[tex]\large{\underline{\underline{ \bigstar{{\pmb{\sf{ \; Therefore \; :- }}}}}}}[/tex]
❝ The net force acting on the automobile is 5000 N. ❞
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Which shows the weight of an atom?
atomic mass
atomic number
chemical symbol
none of the above
Answer:
Atomic mass
Explanation:
Answer:
atomic mass
Click thanks if thankc if this helped
Annie comes to a sudden stop to avoid hitting a deer crossing the road at night. As she hits the breaks, her speed drops from 12 m/s to zero in 1.5 seconds.(p1) How far did she travel during that time? (p2)What was her average acceleration?
Distance(p1)
9 m
8 m
10 m
13.5 m
Acceleration(p2)
6 m/s2
8 m/s2
12 m/s2
16 m/s2
Answer:
1. around 22m
Explanation:
Annie traveled 9 meters during that time. Her average acceleration was -8 m/s².
Annie's initial speed was 12 m/s.
Her final speed was 0 m/s.
The time it took her to stop was 1.5 seconds.
Therefore, the distance she traveled during that time is:
distance = (initial speed + final speed)/2 * time
= (12 m/s + 0 m/s)/2 * 1.5 seconds
= 9 meters
Annie's average acceleration is calculated by dividing her change in velocity by time it took for that change to occur.
In this case, her change in velocity is from 12 m/s to 0 m/s, which is a decrease of 12 m/s.
The time it took for this change to occur is 1.5 seconds.
Therefore, Annie's average acceleration is:
acceleration = change in velocity / time
= -12 m/s / 1.5 seconds
= -8 m/s²
The negative sign indicates that Annie was slowing down.
To learn more about Acceleration, here
https://brainly.com/question/12550364
#SPJ3
How does NaOH form a basic solution when it dissolves in water
When NaOH is added to water, it separates into Na+ and OH-. The hydroxyls make it more basic.
What is basic solution?A basic solution is an aqueous solution containing more OH⁻ ions than H⁺ ions.
When NaOH as a solute is mixed into the solvent like water, it separates NaOH into Na+ and OH-. The sodium ions Na⁺ have little effect on the solution, but the hydroxyls OH⁻ ions makes the solution more basic.
Thus, NaOH form a basic solution by the presence of OH⁻ ions into it.
Learn more about basic solution.
https://brainly.com/question/3595168
#SPJ2
Scientific notation of 1,750
What’s the physics of a football
Answer:
There are many forces involved in the game of football. These are: Force of Gravity, Normal Force, Force of Friction, and Applied Force. Force of Gravity applies to football when the football is thrown or kicked, when a player jumps in the air to avoid a tackle or catch a ball, and is constantly being applied.
Explanation:
How physics is used in football?
When you throw a football across the yard to your friend, you are using physics. You make adjustments for all the factors, such as distance, wind and the weight of the ball. The farther away your friend is, the harder you have to throw the ball, or the steeper the angle of your throw.
Assuming a current is flowing, what increases the strength of the magnetic field of a coiled electrical wire? Select all that apply. Straightening the wire changing the direction of the current flow adding more coils to the wire placing a metal bar within the coils stopping the current.
The strength of the magnetic field is increased by adding more coils to the wire and placing a metal bar within the coils.
The given problem is based on the concept and fundamentals of the magnetic strength in a current-carrying coil of wire. The current-carrying wire in a coiled form is known as Solenoid.
And the mathematical expression for the magnetic field in a solenoid is,[[tex]B = \dfrac{\mu_{0} \times N \times i}{L}[/tex]
Here,
B is the strength of the magnetic field.
[tex]\mu_{0}[/tex] is the magnetic permeability of free space.
N is the number of coils.
The strength of the magnetic field will increase by increasing the number of coils and placing the metallic slab (it will increase magnetic permeability) within the coils.
Thus, we can conclude that the strength of the magnetic field is increased by adding more coils to the wire and placing a metal bar within the coils.
learn more about the magnetic field here:
https://brainly.com/question/19542022
Answer:
C
Explanation:
A 1500 kg car traveling 5.0 m/s collides head on with a 3000 kg truck traveling
7.0 m/s in the opposite direction. If the bumpers lock. What is the velocity of the
two vehicles together immediately following the collision?
Using law of conservation of momentum
[tex]\\ \sf\Rrightarrow m_1v_1-m_2v_2=(m1+m2)v_3[/tex]
[tex]\\ \sf\Rrightarrow 1500(5)-3000(7)=(1500+3000)v_3[/tex]
[tex]\\ \sf\Rrightarrow 7500-21000=4500v_3[/tex]
[tex]\\ \sf\Rrightarrow -13500=4500v_3[/tex]
[tex]\\ \sf\Rrightarrow v_3=-3m/s[/tex]
when a rigid body rotates about a fixed axis, all the points in the body have the same
Hi there!
[tex]\large\boxed{\text{Angular acceleration.}}[/tex]
For a rigid body rotating about a fixed axis, its angular characteristics ⇒ angular acceleration and velocity are constant throughout.
However, its LINEAR velocities/accelerations differ because of the following relationships:
v = ωr
a = αr
Thus, a point closer to the axis of rotation has a smaller linear velocity or acceleration compared to a point along the edge.
How do you find the final velocity of two objects colliding when you only have the mass and initial velocity of both objects
Answer:
We are required to analyze the conservation of kinetic energy in a perfectly inelastic collision.
kinetic energy:K=1/2mv²
momentum:p=mv
Explanation:
Using the equations for final velocity in terms of masses and initial velocity for a perfectly inelastic collision, work out the final kinetic energy. Calculate the initial kinetic energy and show that kinetic energy is not conserved. Use variables, no numbers
You need to follow law of conservation of energy
Energy is neither created nor destroyedWe know
Kinetic Energy=mass(Velocity)^2You may use momentum formula mass×velocity
In both you need to form equations then solve for final velocity
what is the energy equivalent of an object with a mass of 2.5 kg?
Answer:
2,500g is the answer yes
Definition of main energy level
Answer:
the orbital in which the electron is located relative to the atom's nucleus.
Explanation:
Answer:
the principal energy level of an electron refers to the shell or orbital in which the electron is located relative to the atom's nucleus.
Use the drop-down menus to complete each statement. Is the process of charging an object without touching it. Is the process of charging a sphere by touching it with a charged rod.
The process of charging an object without touching it is called induction charging.
The process of charging a sphere by touching it with a charged rod is called charging by conduction..
When an uncharged object brings into the contact of the charged object but not touching the object directly, the uncharged object gets charged. This process of charging is called Induction Charging.
When an uncharged object brings in to the contact of the charged object by touching it directly, the uncharged object gets charged, This process of charging is called Conduction Charging.
When a charged rod touches the metal sphere, sphere gets same charged as the rod. The process of charging a sphere by touching it with a charged rod. is called conduction charging.
For more details about the conduction and induction charging, follow the link given below.
https://brainly.com/question/13599143.
Answer:
induction and conduction or 3,2 or c and b
Explanation:
edge 2022
General kinematics problem.
"Anna is returning from vacation driving down the Sunshine Highway. She travels for a stretch (SA) at a speed of 110 km/h. Then, due to an increase in traffic, Anna is forced to reduce her speed by travelling the second part of the journey (SB) at 60 km/h. The total distance and duration of the trip are 350 km and 4.0 hours respectively.
-> Calculate the time intervals needed to travel SA and SB
-> Calculate the distances covered in the two sections SA and SB".
The results I should get by doing the exercise are in the attached picture.
If you could explain the various steps in the problem you would be doing me a huge favor. Thanks!
Explanation:
What we know:
Sa + Sb = 350 km
Ta + Tb = 4h
S = Vt
With these equations above we can write a system of equations and find Tb, as you see in the picture(s).
After having Tb you can easily find Ta and then Sa and Sb. Hopefully it was clear.
Is it raining anywhere else because it is about to start pouring where I live
Current Forecast is:
Sunny with a temp of 67 deg F, as of rn there is no clouds in the sky
Location, Oklahoma USA in the NE corner
what is the electric field strength at a distance of .50 m from a 1.00x10^-6 c charge?
Answer:
e = k q / r² then,
e = 9×10^9 * 1×10^-6 / 50² = 3.6 N/C
hope this helps ❤.