I need help because I don’t understand that question

I Need Help Because I Dont Understand That Question

Answers

Answer 1
I think you multiple both of them, give me a second and I’ll figure it out!

Related Questions

What did the caterpillar have to do to create the curved graphed with a gradually steeper slope?

Answers

Turn into the anemenous to become a calipiter

Why do you think the electron of the hydrogen atom stays close to the proton in the atom’s nucleus?

Answers

Answer:

Electrons are retained by the electromagnetic force in the orbit around the nucleus since the nucleus is positively charged in the middle of the atom and absorbs the electrons charged negatively.

Hope this helps!

We have that for the Question "Why do you think the electron of the hydrogen atom stays close to the proton in the atom’s nucleus" it can be said that

Electron of the hydrogen atom stays close to the proton in the atom’s nucleus because hydrogen with a low proton and electron number its repulsion will be low  

From the question we are told

Why do you think the electron of the hydrogen atom stays close to the proton in the atom’s nucleus?

Generally

The electrons are father away from the protons in the nucleus as atomic number increases

This is because of the law of attraction where unlike charges reply

Therefore

For hydrogen with a low proton and electron number its repulsion will be low and Hence  electron of the hydrogen atom stays close to the proton in the atom’s nucleus

For more information on this visit

https://brainly.com/question/17756498

+ 9. What force (in units of Newtons) is needed to give a 3.5 m/s" acceleration to a 1200 kg car?

Answers

Answer:

4200 Newtons

Explanation:

Force = mass x acceleration

1200 x 3.5 = 4200

Which statement describes all solids?

Answers

The second one. Liquids have definite volume but indefinite shape, and gases have neither definite volume nor shape.

Answer:

They contain loosely packed atoms.

Explanation:

it takes 275n to set a stationary 77.3 crate in motion. what is the coefficient of static friction?

Answers

Note: I'm assuming the data 77.3 is the mass of the crate.

Answer:

[tex]\mu_s =0.36[/tex]

Explanation:

The coefficient of static friction, called \mu_s is the ratio between the force needed to start moving an object above a rough surface (Fr), and the normal force the surface exerts on the object (N).

[tex]\displaystyle \mu_s =\frac{Fr}{N}[/tex]

The normal force is numerical equivalent to the weight of the body if no other external forces are acting.

[tex]N=m\cdot g[/tex]

The mass of the crate is m=77.3 Kg, thus its weight and normal force is:

[tex]N=77.3\ kg\cdot 9.8\ m/s^2[/tex]

[tex]N= 757.54\ Nw[/tex]

Now we calculate the coefficient:

[tex]\displaystyle \mu_s =\frac{275\cancel{N}}{757.54\cancel{N}}[/tex]

[tex]\boxed{\mu_s =0.36}[/tex]

Answer:

0.36

Explanation:

A student weighs 530 N. The walk to the top of a 3m staircase. It takes them 5 seconds. How
much work did they do?
*

Answers

Answer:

W = 1590 J

Explanation:

We could use the formula of potential energy to find work as both have the same units,

                    W = mgh

since weight = mg so,

                     Work = weight x height

                               = 530 x 3

                               = 1590 J

Answer:

The work will be 1590 J

since the formula is W = F x D so I cancel the time

Explanation:

Given:

(Force) F = 530N

(Distance)D = 3m

Unknown:

W or Work

Formula and Solution:

W = F x D

W = (530N) (3m)

Final Answer:

W = 1 590 N·m or simplify as 1590 J

The distance between a scalar and a vector is that a vector quantity includes what

Answers

Answer:

magnitude and direction e.g acceleration,displacement

Use the drop-down menu to complete the statement.
Increasing the amount of current that flows through a wire________ the strength of an electromagnet.

Answers

Answer:

increases

Explanation:

edgu2020

Increasing the amount of current that flows through a wire increases the strength of an electromagnet.

What is an electromagnet?

An electromagnet is a type of magnet that is created by running an electrical current through a coil of wire. Unlike permanent magnets, which have a fixed magnetic field that cannot be adjusted, the magnetic field of an electromagnet can be turned on and off or adjusted by controlling the amount of current flowing through the coil.

The strength of an electromagnet depends on several factors, including the number of coils in the wire, the amount of current flowing through the wire, and the type of core material used in the coil. Electromagnets are widely used in various applications, such as in electric motors, generators, relays, MRI machines, and particle accelerators.

One of the advantages of electromagnets is that their magnetic field can be easily controlled by adjusting the amount of current flowing through the wire. This makes them useful in applications where the magnetic field needs to be turned on and off, or where a variable magnetic field is required.

Another advantage of electromagnets is that they can be designed to be much stronger than permanent magnets. This is because the strength of an electromagnet is directly proportional to the amount of current flowing through the coil, which can be increased or decreased as needed.

Here in this question,

This happens because an electromagnet is created when an electric current flows through a wire, generating a magnetic field around the wire. The strength of the magnetic field depends on the amount of current flowing through the wire.

When more current flows through the wire, the magnetic field around the wire becomes stronger. This is because the magnetic field is directly proportional to the current flowing through the wire, as well as the number of loops of wire in the coil.

Therefore, increasing the current flowing through a wire in an electromagnet will increase the strength of the magnetic field, resulting in a stronger electromagnet.

To learn about Ohm's law click:

brainly.com/question/29775285

#SPJ7

The part of a flower which holds the egg cells is the:

ovary

style

stamen

anther

Answers

Answer:

Maybe pistil or ovary

pistil usually is located in the center of the flower and is made up of three parts: the stigma, style, and ovary

Answer:

A. Ovary

Explanation:

HEY CAN ANYONE PLS ANSWER DIS!!!!!!!!!!!!!!!

Answers

Answer:

Explanation:

you can seperate mixtures  by filtration, evaporation, distillation and chromatography.

Answer:

I think, i can separate the mixtures through

FiltrationMagnitizationeverpouration to dryness

A block measuring 20cm by 10cm by 5cm rests on a flat surface. Determine the maximum pressure it exerts on the surface.​

Answers

Sorry I’m in the middle of a test and gotta find a answer sorry again

1. Newton's 1st Law: A skydiver opened their parachute and now experiences a force of gravity of -450 N (down) and a force of air resistance of +450N (up).

a) What is the net force (sum) acting on the skydiver?

Answer:

Answers

Net force is zero, so skydiver continues to fall at a constant velocity (called terminal velocity)

What happens to potential energy as the mass of an object decreases? ​

Answers

Answer:

As the mass of the object decreaes, the potential energy also decreases.

Explanation:

what is acceleration

Answers

Answer:

Explanation:

Acceleration is the rate of change of velocity. Usually, acceleration means the speed is changing, but not always. When an object moves in a circular path at a constant speed, it is still accelerating, because the direction of its velocity is changing.

[tex]{\tt{\red{\underline{\underline{\huge{Answer:}}}}}}[/tex]

[tex]\longrightarrow[/tex] The rate of change of velocity per unit time is called acceleration.

[tex]\longrightarrow[/tex] Its SI unit is m/s².

[tex]\huge\boxed{\fcolorbox{blue}{red}{Thank you}} [/tex]

PLEASE HELP

To celebrate a victory, a pitcher throws her glove straight up into the air with an initial velocity of 6.0 m/s. What is the maximum height of the glove? (Show work)

Answers

Answer:

h = 1.8 m

Explanation:

The initial velocity of the glove, u =- 6 m/s

We need to find the maximum height of the glove. Let it is equal to h. Using equation of kinematics. At the maximum height v = 0

[tex]v^2-u^2=2ah[/tex], h is the maximum height and a = -g

[tex]0^2-(6)^2=2\times (-10)\times h\\\\h=\dfrac{36}{20}\\\\h=1.8\ m[/tex]

Hence, it will go up to a height of 1.8 m.




What will be the velocity of a train if it covers the distance of 30m in 3 s?

Answers

Answer:

Soln:

d=30m

t=3s

now:

v=d/t

=30/3

=10

Velocity is distance/time, which is, in this case, 30m/3s = 10 meters per second.

I need this one fast!!!!

Nitrous oxide is the chemical name for "laughing gas." What are the names and the number of atoms in a molecule of
nitrous oxide, N2O?

1.one nitrogen atom and two oxygen atoms

2.two nitrogen atoms and one oxygen atom

3. one nitrogen atom and one oxygen atom

4. two nitrogen atoms and two oxygen atoms

Answers

Answer:

b

Explanation:

there are 2 nitrogen and 1 oxygen, you can tell by the little number after the letter. if there is no number, then it's just one atom

Answer:

B.

Explanation:

I got it right on my test.

If a person is picking up a book with the force of 50 N and the gravity is pushing down with 15 N, what is the net force?

Answers

Answer:

[tex]the \: net \: force = \: 50 - 15 = 35.[/tex]

Answer:

Net force is going to be GREATER FORCE - LESS FORCE if they are working in opposite direction

so,

         50N - 15N = 35N

a 0.006kg bullet is fired at 350 m/s into a container that stops it at .30 m. what is the average force stopping the bullet?

Answers

Answer:

is this a mudder question

An airplane lands with an initial velocity of 60 m/s and then slows down at 1.5 m/s2 for 30 seconds. What is its final velocity?
a. 3 m/s
b. 15 m/s
c. 98 m/s
d. 105 m/s

Answers

I think the correct answer is d

A car traveling initially at the speed of 30 m/s slows down at the rate of -2m/s^2 for a distance of 60 meters. What is the car’s velocity after covering this distance?

Answers

Answer:

Vf = 25.7 [m/s]

Explanation:

To solve this problem we must use the following kinematics equation:

[tex]v_{f} ^{2}= v_{i} ^{2}-(2*a*x)[/tex]

where:

Vf = final velocity [m/s]

Vi = initial velocity = 30 [m/s]

a = desacceleration = 2 [m/s^2]

x = distance = 60 [m]

Note: the negative sign in the equation means that the car slows down.

Now replacing:

[tex]v_{f}^{2}=(30)^{2}-(2*2*60)\\ v_{f}^{2} = 660\\v_{f} =\sqrt{660} \\v_{f}=25.7[m/s][/tex]

Where on the periodic table are the anions of ionic bonds found?

a . Anions are the negatively charged nonmetals on the right side of the periodic table

b. Anions are the negatively charged metals on the right side of the periodic table

c. Anions are the positively charged nonmetals on the left side of the periodic table

d. Anions are the positively charged metals on the left side of the periodic table

Answers

answer:

b.

explanation:

ik its right trust me <3

cause metals on the left and in the center of the periodic table form ionic bonds with nonmetals on the right of the periodic table.

Which items are needed for a plant to become fertilized?

egg

pollen

embryo

seed

Answers

The answer is pollen.

Fertilization in flowering plants happens through a process called pollination.
Pollen of course or it could be seed

HELP WHIT PROJECT PLZZ FOR ALL MY POINTS!!!!!!!!!!! X^X

Answers

Answer:

maybe. inv me to slides and I'll try.

Explanation:

please answer! thank you!

Answers

Answer:

Maybe A.... I'm not sure

Explanation:

A. Is the answer I think

Which vector points in the direction of the centripetal acceleration of the plane

Answers

Answer:

d

Explanation:

What is the resultant of 5N force pointing north and 7N force pointing south? Do not forget to include the direction.

Answers

Answer:

It would be 2N pointing South.

Explanation:

Since the forces are going in opposite directions, you can subtract them. Which makes it 7N south minus 5N North. That is 2N pointing South. Because the force going south is greater, it is the direction the force will be going.

Which statements about energy are true?
1.Energy is found only in moving objects.
2.Energy is never created.
3.Energy can move matter.
4.Energy is the same as force.
5.Energy is never destroyed

Answers

Answer:

Energy is found only in moving objects : False

Energy is never created : True

Energy can move matter : True

Energy is the same as force : False

Energy is never destroyed : True

Explanation:

Plato

Energy can neither be created nor be destroyed. Energy is generated by both moving and stationary objects but in different forms. Energy can move matter. Hence, options 2, 3 and 5 are correct.

What is energy conservation ?

According to the law of conservation of energy, energy can neither be created nor be destroyed. However, it can be transformed from one state to the other. For example electrical energy can be converted to light energy.

Energy is generated in both stationary and moving object. The energy for a particle gained by its motion is called its kinetic energy. The energy stored on an object at rest is called potential energy.

Energy can move matter as well. The energy used to displace an object is called work done on the object. The unit of energy and work done  is joule. Therefore, options 2, 3 and 5 are correct.

Find more on energy:

https://brainly.com/question/1932868

#SPJ2

When you cook a marshmallow on a metal poker tool over an open flame, energy is transferred. Identify the three different ways thermal energy is transferred in this situation. Be sure to name the specific places or phenomenon in this system where each of the types of thermal energy transfer is occurring and the direction the energy is being transferred (from what to what).

Answers

Answer:

The three ways thermal energy is transferred are;

1) Conduction

2) Convection

3) Radiation

Explanation:

1) The conduction of the heat from the open flame to the marshmallow is through the direct contact of the flame with the marshmallow, such that the flame the region of the combustion reaction, that produces light and heat touches the marshmallow

2) The convection process is the transfer of heat from the rising heated combustion products, as well as the heated air that rises from the flame

3) The radiation heat transfer is the transfer of the heat from the fire to the marshmallows directly by the heat the moves in the form of electromagnetic waves at temperatures above 1000 K, without the need for a medium, such that the marshmallow can be heated by the heat coming from side of the flame.

How long does it take a dropped object to fall 45 meters?

Answers

Answer:

If we forget about drag for a second then any object will accelerate at 9.8 m/s/s. The distance traveled is (9.8 m/s)/2 * (x seconds)^2, so solving for 45 meters the no-air fall will take 3.06 seconds and reach 30 m/s or 108 kph or 67.1 mph

Explanation:

Other Questions
1pt. A roller coaster car is released from a standing start at the top of a 20.0-m hill. The car rolls down the hill to a point 10.0 mabove the ground, then up a second hill to 15.0 m, and then down again to point X at 8.00 m above the ground. Use whatyou know about the sum of the kinetic and potential energies to find the car's speed at X.A. 11.7 m/sB. 12.5 m/s C. 15.3 m/sD. 19.8 m/s Find:1/154/120Select one:A. 4B. 1C. 3D. 2 Fidelity Stereo Company has provided the following information regarding its activity-based costing system:Purchasing department costs are allocated based on purchase orders, and the predetermined overhead allocation rate is $77 per purchase order.Assembly department costs are allocated based on the number of parts used, and the predetermined overhead allocation rate is $5 per part.Packaging department costs are allocated based on the number of units produced, and the predetermined overhead allocation rate is $4 per unit produced.Each stereo produced has 50 parts, and the direct materials cost per unit is $70. There are no direct labor costs. Fidelity Stereo has an order for 1200 stereos, which will require 45 purchase orders in all. What is the total cost for the 1200 stereos?a. $392,265b. $303,465c. $388,800d. $307,950 So please answer................ Which location would be most attractive to a Viking raiding party?A. An isolated farm in the countryside incorrect answerB. A wealthy estate near a river incorrect answerC. A small cottage on the coastline incorrect answerD. A fortified castle near a beach incorrect answer Rotate (1,4) 90 degrees clockwise.ANSWER FAST PLZZ! will give brainliest Who here got zoom and can do math? What were the effects of Israel being created Part II. In LiteratureRead the following passage from "O! Pioneers" by Willa Cather. Write three examples of the use ofpersonification."We hadn't any of us much to do with it, Carl. The land did it. It had its little joke. It pretended tobe poor because nobody knew how to work it right; and then, all at once, it worked itself. It wokeup out of its sleep and stretched itself, and it was so big, so rich, that we suddenly found we wererich, just from sitting still." what is the volume of 2 G piece of gold? (Best answers gives brainlist answers) Through (10, -7), slope: how do i solve this Can someone fill in the blanks for me pls :( :( omg. PLEASE HELP WILL MARK THE FIRST PERSON TO RESPOND BRAINIEST.Sir Nurse compares the biological cell to the physical atom. Do you think this is a good comparison? What strengths does this comparison have? What weaknesses does it have? What are the measures of angle A,B,C and D? What are 5 ways to keep your heart healthy ( this is for a freshman anatomy class please help) A 1.10-kg object slides to the right on a surface having a coefficient of kinetic friction 0.250 (Figure a). The object has a speed of vi = 2.60 m/s when it makes contact with a light spring (Figure b) that has a force constant of 50.0 N/m. The object comes to rest after the spring has been compressed a distance d (Figure c). The object is then forced toward the left by the spring (Figure d) and continues to move in that direction beyond the spring's unstretched position. Finally, the object comes to rest a distance D to the left of the unstretched spring (Figure e).The right end of a horizontal spring labeled k is attached to a wall. Five images show five configurations as a block labeled m approaches, compresses, and then moves away from the spring.In figure a, the block is to the left of the spring, and an arrow above the block points to the right.In figure b, the block is just touching the uncompressed spring, and an arrow labeled vector vi above the block points to the right.In figure c, the block has compressed the spring by a distance d, and a label indicates vector vf = 0.In figure d, the block is just touching the uncompressed spring, and an arrow labeled vector v above the block points to the left.In figure e, the block is a distance D away from the spring, and a label indicates vector v = 0.(a)Find the distance of compression d (in m). m(b)Find the speed v (in m/s) at the unstretched position when the object is moving to the left (Figure d). m/s(c)Find the distance D (in m) where the object comes to rest. m(d)What If? If the object becomes attached securely to the end of the spring when it makes contact, what is the new value of the distance D (in m) at which the object will come to rest after moving to the left? m Find the value of x?7511x-2 PLZ HELP WILL VOTE BRAINIEST The quote stresses the speaker's belief in the importance of1. diversity2. assimilation3. resistance what was the purpose of "indago," something sought after by early colonists?