I don’t understand how to do this it’s very confusing

Answer: C

Explanation:

To make up 1 L of a 0.5 M solution of EDTA starting with the free acid, the pH must be adjusted to 7.0. EDTA is a weak acid with a pKa of 2.0, 2.67, 6.16, and 10.26 for the four acetic acid groups.

At a pH of 7.0, EDTA will exist in a buffered state, meaning that it will be partially protonated and partially deprotonated.

To adjust the pH of the EDTA solution to 7.0, an alkali solution such as 10 M NaOH must be added. The amount of NaOH required can be calculated using the Henderson-Hasselbalch equation:

pH = pK a + log([base]/[acid])

where [base] is the concentration of the deprotonated form of EDTA and [acid] is the concentration of the protonated form of EDTA.

At a pH of 7.0, the acid-base equilibrium of EDTA will be:

[EDTA-] = [HEDTA]

At this pH, the buffer capacity is high. Since the pKa of EDTA is close to the desired pH, the buffer will resist changes in pH caused by added acids or bases.

Learn more about pH Buffer here: https://brainly.com/question/17878969

#SPJ4

Answer:

D).  2-Butyne

Explanation:

The "yne" indicates a triple bond.  The "2-" says it starts on the second carbon,

0.12  atoms of oxygen are present in 0. 04 mole NaNO3, 2. 0.097 moles of nitrogen atoms are present in 10. 5g of N2O5, 3. 0.127 atoms of oxygen are present in 50g of Fe(H20)2(S04)3

To find the number of atoms of oxygen present in 0.04 mole NaNO3, you can use the mole ratio from the chemical formula. The formula for NaNO3 is NaNO3, which means that for every 1 mole of NaNO3, there are 3 moles of oxygen atoms. Therefore, 0.04 mole of NaNO3 contains 0.04 mole x 3 atoms/mole = 0.12 atoms of oxygen.

To find the number of moles of nitrogen atoms present in 10.5 g of N2O5, you can use the molar mass and the molar ratio from the chemical formula. The molar mass of N2O5 is 108 g/mol, and the formula for N2O5 is N2O5, which means that for every 1 mole of N2O5, there are 2 moles of nitrogen atoms. Therefore, 10.5 g of N2O5 contains 10.5 g / 108 g/mol = 0.097 moles of nitrogen atoms.

To find the number of atoms of oxygen present in 50 g of Fe(H2O)2(SO4)3, you can use the molar mass and the molar ratio from the chemical formula. The molar mass of Fe(H2O)2(SO4)3 is 392.18 g/mol, and the formula for Fe(H2O)2(SO4)3 is Fe2(SO4)3.6H2O, which means that for every 1 mole of Fe(H2O)2(SO4)3, there are 6 moles of oxygen atoms. Therefore, 50 g of Fe(H2O)2(SO4)3 contains 50 g / 392.18 g/mol = 0.127 moles of oxygen atoms

Learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

Physical changes occur in dairy products when water is simply evaporated from milk (powdered milk and sweetened condensed milk).

What is  physical change?

To learn more about physical change refers to;

https://brainly.com/question/29376983

#SPJ4

The task is asking you to conduct experiments to determine the equilibrium concentrations of the gases NO, NO2, and N2O3 .

Specifically, you are to vary the initial partial pressures (or concentrations) of the gases and use a gizmo (presumably some sort of laboratory instrument) to measure the equilibrium partial pressures of each gas. You should conduct three trials for each set of initial conditions and record the data in a table with four columns: the initial partial pressures of NO, NO2, and N2O3 and the equilibrium partial pressures of NO, NO2, and N2O3. It is important to note that some NO2 molecules may combine to form N2O4, so there may be less free NO2 than NO at equilibrium. This experiment is designed to study the equilibrium of the reaction: 2NO(g) + 2NO2(g) <-> 2N2O4(g); The task is asking you to study the effect of the initial concentrations of each reactant on the equilibrium concentrations of each product. The data you collect should be useful in understanding the reaction kinetics and the thermodynamics of the system.

Learn more about thermodynamics here :

https://brainly.com/question/1673567

#SPJ4

If a mixture contains 0.250 mol of fe and 1.20g of c. the total number of atoms in the mixture is:  2.106× 10^23.

First step is to convert it into number of atoms

Atoms  of Fe = 0.250 mol × 6.02 × 10^23 /1 mol

Atoms of Fe = 1.505 ×10^23

1.20g of C to atoms of C

Molar mass of C =12.011g/mol

Atom of C = 1.20g × 1 mol/12.011g × 6.02 × 10^23 /1 mol

Atom of C = 6.014× 10^22

Now let find the total number of atoms

Total number of atoms  = Atoms of Fe + Atoms of C

Total number of atoms  =  1.505 ×10^23 + 6.014× 10^22

Total number of atoms   = 2.106× 10^23

Therefore the Total number of atoms  is  2.106× 10^23

Learn more about Total number of atoms  here:https://brainly.com/question/441927

#SPJ1

The highest melting point is 0.100 m AlCl₃

Water has a 0.51 Cl  molal melting point elevation constant.

They all share the same molal melting point elevation constant because they are all aqueous solutions.

ΔT = i*Kb*m

The melting point elevation is ΔT, 

i = the van't Hoff factor =1,

The molal elevation constant of water's melting point is 0.51°C/m.

"where m = the molality = 0.100 m"

ΔT = i*Kb*m

ΔT = 1 * 0.51 * 0.100

ΔT  = 0.051 °C

ΔT = i*Kb*m

ΔT =2 * 0.51 * 0.100

ΔT = 0.102 °C

ΔT = i*Kb*m

ΔT =4 * 0.51 * 0.100

ΔT = 0.204 °C

ΔT = i*Kb*m

ΔT =3 * 0.51 * 0.100

ΔT = 0.153 °C

Your question is incomplete but most probably your full question was

which aqueous solution will have the highest melting point? assume all of the solute are nonvolatile and have ideal van't hoff factors. 0.100 m C₆H₁₂O₆ 0.100 m NaCl 0.100 m AlCl₃0.100 m MgCl₂

learn more about melting point at

https://brainly.com/question/29578567

#SPJ4

Theoretically, 7.72 g containing ca(s) as well as 2.04 g of even more sulfur may be combined to produce 2.88 g of cas(s) (s).

Among the most rectifiers is sulfur (S), sometimes spelt as sulfur, a nonmetallic chemical element in the oxygenation member (Group 16 [VIa] of the atomic numbers). Natural sulfur is a pale yellow substance that is brittle, flavorless, and odorless.

Sulfur can be found naturally and now in metal bauxite ore. Natively, it can be found close to hot springs and volcanoes. The tenth most prevalent element, selenium is found in asteroids, the ocean, the crust of the earth, and the atmosphere.

balanced equation,

Ca + S ---> CaS

stoichiometry of Ca to S is 1:1

= Ca moles - 1.6 g/ 40 g/mol

= 0.04 mol

= S moles - 4.25 g / 32 g/mol

= 0.13 mol

stoichiometry of Ca to CaS is 1:1,

= CaS moles formed - 0.04 mol

= mass of CaS - 0.04 mol x 72 g/mol

theoretical yield = 2.88 g

To know more about sulfur visit:

https://brainly.com/question/29582168

#SPJ4

If the piece of the metal has the volume of the 0.00670 L and the mass of the 60 g. The density of the rock is 8955.2 g/L.

The mass of the metal = 60 g

The volume of the metal = 0.00670 L

The density is the ration the mass to the volume of the substances .

The density expression is given as :

The Density = mass / volume

Where,

The mass = 60 g

The volume = 0.00670 L

The density = 60 / 0.00670

The density = 8955.2 g/L

Thus the density of the rock is the 8955.2 g/L.

To learn more about density here

https://brainly.com/question/18158909

#SPJ4

Answer:

correct

Explanation:

I agree that California cities that are farther inland, such as Sacramento, are typically warmer than those that are near the coast, such as San Francisco. This is because the coast has a cooling effect due to the ocean breeze and the proximity to the ocean, which helps to moderate temperatures. Inland areas, on the other hand, are farther from these cooling influences and can experience higher temperatures, especially during the summer months

Answer:

C

Explanation:

because i checked it in the periodic table solve it and that's it

Answer:

Explanation:

2 Cr3+ + 3/2 O2 -----> Cr2O3

volume of the platinum bar is 30 cm3, density of the platinum bar is 25g/cm3

It is assumed that,

750 g is the mass of a platinum bar.

L = 5 cm is the bar's length.

The width of the bar is 4 cm.

Bar width, 1.5 cm in height

V=l*b*h v=4*5*1.5=30cm3 is the volume of the bar.

The density of the platinum bar needs to be determined. Any substance's density can be calculated using:

The density of the platinum bar is 25g/cm3 and the volume of the platinum bar is 30 cm3.

So, the platinum bar's density. Therefore, this is the necessary solution.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ4

50.9 grams of Cu are added to the excess silver nitrate solution.

The molar mass of a chemical compound is defined in chemistry as the ratio between the mass and amount of substance in any sample of said compound. The molar mass of a substance is a bulk property, not a molecular property. A substance's molar mass is the mass in grams of one mole of the compound. A mole is the number of entities present in a substance, such as atoms, molecules, or ions. A mole of any substance is defined as 6.022*10^23 molecules.

Here,

moles =  mass÷  molar mass

molar mass of Cu = 63.5 g/mol

moles = 15.00 g÷ 63.5 g/mol

= 0.236  moles

moles of Ag   =0.236  

moles  x 2/1 =0.472  moles

mass = moles x molar mass

the molar mass of Ag =107.87 g/mol

mass  = 0.472  moles x 107.87 g/mol = 50.9 g

50.9 grams of Cu is added to the solution of excess silver nitrate.

To know more about molar mass,

https://brainly.com/question/11766789

#SPJ1

Answer:

Humans use many fossil fuels such as oil and coal which in turn releases much carbon into the atmosphere. And burning of the forests also releases much carbon as well. This carbon in the atmosphere does many negative changes to the earth such as causing ocean acidification and overall hurting the planet's ecosystems.

Knowing how atoms and molecules behave in chemical reactions in chemistry depends on understanding electron transfer processes. The transfer of one or more electrons from one species.

to another occurs in electron transfer reactions, which are closely connected to oxidation-reduction (redox) processes. Atoms' oxidation states change during redox reactions, which are chemical processes. In the process of oxidation, electrons are lost, whereas in the process of reduction, electrons are gained. In a redox reaction, an oxidizing species (the reducing agent) transfers electrons to a species that is being reduced (the oxidizing agent). The term "oxidized" refers to a species that is losing electrons, whereas the term "reduced" refers to a species that is gaining electrons.Several biological activities, including cellular respiration, photosynthesis, and biochemical reactions, depend heavily on electron transfer reactions. They are utilized in a variety of technologies, including electrochemistry, fuel cells, and batteries.

learn more about  electrons here:

https://brainly.com/question/1255220

#SPJ4

Answer:

Creating products that improve people's lives.

Remaining impartial about the data while conducting experiments.

Explanation:

The 50 moles of CO2 are produced when 3.9 moles of C2H2 burn in oxygen.

What is moles?

One mole is defined as the quantity of substance that has the same number of chemical species (atoms, molecules, ions, etc.) as those contained in 12 grams of the carbon-12 isotope.

What is oxygen?

Because oxygen contains only one type of atom, it is a chemical element, which is a type of substance. Since oxygen has an atomic number of 8, it is represented by the letter O in its formal chemical formula and has eight protons in its nucleus. In nature, molecular oxygen can be discovered.

2C2H2(g) + 5O2(g) ==> 4CO2(g) + 2H2O(g)

Next, look at the stoichiometric ratio of C2H2 to CO2.  You can see it is 2 moles C2H2 produces 4 moles CO2.

Thus, 25.0 moles C2H2 x 4 moles CO2/2 moles C2H4 = 50.0 moles CO2

Therefore, 50 moles of CO2 are produced when 3.9 moles of C2H2 burn in oxygen.

Learn more about moles from the given link.

https://brainly.com/question/24191825

#SPJ1

The correct answer is  printed  flyers and internet .

Printed flyers and internet are two popular advertising mediums used to promote businesses. Printed flyers can be distributed directly to customers through mail or handed out in public places. This allows for a targeted approach and can be cost-effective, especially if the business is located in a small area. However, printed flyers can easily get lost or discarded, making it difficult to measure their effectiveness.

On the other hand, the internet offers a wider reach and can target a larger audience. Advertisements can be placed on websites, social media platforms, and search engines. This allows for more precise targeting based on demographics and interests. The internet also offers the ability to track and analyze the success of advertising campaigns in real-time, allowing for quick adjustments to be made to improve their effectiveness. However, the cost of internet advertising can be higher than traditional print advertising, and it may require more technical knowledge and resources to create and manage an online advertising campaign.

learn more about  advertising here:

brainly.com/question/16257206

#SPJ4

Leslie wants to know which advertising medium works best to promote her electronics store. She surveys her customers over a weekend and creates a bar graph. Based on her survey, which advertising mediums will work best to publicize Leslie’s in-store specials?

Answer:

80,000km/h

Explanation:

Answer: 12.5 hope this is right.

Explanation:

Krypton has higher melting pointthen argon because of its stronger dispersion forces for iasondue to increase in atomic mass inter atomic attraction in these elements is only due to wekdispersion interactions. Answer for this problem is stronger dispersion forces.

The London dispersion force can be defined as a temporary attractive force due to the formation of a temporary dipole in  nonpolar molecules. When the electrons of two adjacent atoms move so that the atoms momentarily become dipoles, they are attracted to each other by the London dispersion force.

To know more about dispersion force:

https://brainly.com/question/14958417

#SPJ4

Bond energy is explained as the energy needed to destroy a bond/link. These values ​​are positive, indicating that bond scission is endothermic.

To learn more about Bond energy from the given link:

https://brainly.com/question/14205107

#SPJ1

Yes Paul feyerabend falls more under postmodernism rather than modernism.

Paul feyerabend is considered a postmodernist philosopher of science. He is known for his critiques of the scientific method and the idea that there is a single "correct" way to do science. He argued that science is not a rational or objective enterprise, but is instead shaped by social and cultural factors. Feyerabend's views align more with postmodernism, which emphasizes the importance of context and subjectivity in understanding knowledge and reality.

learn more about postmodernism here :

https://brainly.com/question/29447160

#SPJ4

The balanced equation of the redox reaction using the ion-electron method is:

The correct option is D.

Redox reactions include a change in the oxidation state of the substrate. When oxidation occurs, electrons are lost, or the oxidation state increases. When a reduction occurs, electrons are gained or the oxidation state decreases.

The balanced equation of the redox reaction using the ion-electron method is given below as follows:

Hg + HNO₃ → Hg(NO₃)₂ + NO + H₂O

Hg⁰ is oxidized to Hg²⁺ by the loss of two electrons

N⁵⁺ is reduced to N²⁺ by a gain of three electrons

To balance electron loss, we add a coefficient of 3 in from of Hg and a coefficient of 8 in front of HNO₃

3 Hg + 8 HNO₃ → 3 Hg(NO₃)₂ + 2 NO + 4 H₂O

Learn more about redox reactions at: https://brainly.com/question/21851295

#SPJ1

The correct option is (C), i.e. C. The UV index represents the intensity of the ultraviolet rays.

The UV index serves as a gauge for the UV radiation intensity from the sun. It is a scale that ranges from 0 to 11+ and it is used to indicate the level of solar UV radiation on a particular day. The higher the UV index, the stronger the sun's UV radiation and the greater the risk of sunburn and other harmful effects on the skin and eyes. It is important to pay attention to UV index when spending time outdoors, especially during summer months and at high altitude or closer to the equator where the sun is stronger.

To know more about UV please refer: https://brainly.com/question/29473116

#SPJ4

Answer:

Only, 0.315.

Full number: 0.31508964300342

400.0 ml of a 0.300 m solution of NaCl is diluted to 900.0 ml. The new concentration of the solution is 0.133 M.

Given that :

The initial concentration, C1 = 0.300 M

The initial volume, V1 = 400 mL

The final volume, V2 = 900 mL

The final concentration , C2 = ?

The final concentration can be calculated as :

C1 V1 = C2 V2

C2 = C1 V1 / V2

C2 = ( 0.300 × 400 ) / 900

C2 = 0.133 M

Thus, the concentration of the new volume with the volume of 900 mL is 0.133 M.

To learn more about concentration here

https://brainly.com/question/25642048

#SPJ4

The average speed of the car would be:

The average speed of a moving object is the ratio of the total distance traveled by the object and the total time taken to cover the distance traveled.

The average speed can be mathematically expressed as:

Average speed = total distance/total time

From the graph, the total distance traveled by the car can be estimated as:

4800 + 320 = 5120 m

Total time = 10 minutes

Average speed of the car = 5120/10 = 512 meters per minute

5120 meters = 5120/1000 = 5.12 kilometers

10 minutes = 10/60 = 0.17 hour

Average speed of the car in kilometers per hour = 5.12/0.17 = 30.12 km/h

In other words, the average speed of the moving car in meters per minute is 512, while the speed in kilometers per hour is 30.12.

More on average speed can be found here: https://brainly.com/question/12322912

#SPJ1

To neutralize 0.0350L of an unidentified Sn(OH)2 solution, 0.125L of a 0.075 M HBr solution is utilized. The molarity of the unknown Sn(OH)2 solution is 0.268 M.

The neutralization reaction between HBr and Sn(OH)2 is as follows:

HBr + Sn(OH)2 ---> SnBr2 + 2H2O

We can use the balanced equation and the stoichiometry of the reaction to find the molarity of the unknown Sn(OH)2 solution.

From the balanced equation, we can see that for every 1 mole of HBr, 1 mole of Sn(OH)2 is consumed.

We know that the HBr solution is 0.125L and 0.075M, so the number of moles of HBr is 0.125L x 0.075M = 0.00937 moles.

Since the number of moles of HBr is equal to the number of moles of Sn(OH)2, we can use the same number of moles to find the molarity of the unknown Sn(OH)2 solution.

The quantity of solute molecules per liter of solution is known as a solution's molarity. Therefore,

Molarity of unknown Sn(OH)2 solution = moles of solute / liters of solution

Molarity = 0.00937moles / 0.0350L = 0.268 M

Therefore, the molarity of the unknown Sn(OH)2 solution is 0.268 M.

To know more about molarity please refer: https://brainly.com/question/8732513

#SPJ4