Answer:
A demultiplexer (DEMUX) is a digital circuit that routes a single input line to one of several output lines. It can be implemented using OR gates.
Here's one way to make a 2-to-4 demultiplexer using OR gates:
Begin by connecting the input line to the input of the first OR gate.
Connect one of the select lines to the second input of the first OR gate.
Connect the output of the first OR gate to one of the outputs.
Connect the second select line to the second input of the second OR gate.
Connect the output of the first OR gate to one input of the second OR gate.
Connect the output of the second OR gate to the second output.
Repeat steps 4-6 for the remaining outputs.
By this way you can construct a demultiplexer using OR gates.
It's important to note that the number of select lines must be equal to the number of bits required to select the output. In this example, we used 2 select lines to control the 4 outputs, so we only needed 2 bits to select the output.
what was the significance of the voting rights act?
It outlawed the discriminatory voting practices adopted in many southern states after the Civil War, including literacy tests as a prerequisite to voting.
What is meant by Civil War ?
War between established parties within the same state is known as an intrastate conflict or civil war (or country). One side's objective may be to seize power in the nation or a specific area, secure regional independence, or alter governmental practices. The Latin word bellum civil, which means "war of or related to citizens," is where the term "civil war" originates. It was initially used to refer to the Roman civil conflicts of the first century BCE.
The Confederate States of America, a grouping of eleven southern states that seceded from the Union in 1860 and 1861, and the United States of America fought each other in the American Civil War.
To learn more about Civil War refer to
brainly.com/question/24992590
#SPJ4
the hub and blades of a utility scale wind turbine form the ________, which converts wind energy into rotational energy that turns an electrical generator
An electric generator is linked to the rotor, which rotates when the blades are turned by the wind.
What is the conversion of wind turbine energy? An electric generator is linked to the rotor, which rotates when the blades are turned by the wind.The four basic components of most wind turbines are as follows: A hub, to which the blades are fastened, rotates in tandem with them.Rotor is comprised of blades and hub.The aerodynamic force produced by a wind turbine's rotor blades—which function similarly to an airplane wing or a helicopter rotor blade—converts wind energy into electricity.Gearbox.The main bearing, main shaft, gearbox, generator, and rotor make up the drivetrain.The rotor (blades and hub assembly) of the turbine rotates at low speed and high torque, which is converted into electrical energy by the drivetrain.To learn more about electric generator refer
https://brainly.com/question/12475693
#SPJ4
A Search Distance Heuristic Homework. Unanswered o For each method - sometimes used as heuristic, what is the distance from start to end? (Ignore any coloring in the boxes) Drag and drop options on the right-hand side and submit. For keyboard navigation...Show More Manhattan Distance V41 Chebyshev Distance = Euclidean Distance = G = 9 = 7 Fullscreen
A search distance heuristic is an algorithm used to find the shortest path between two points in a graph.
The Manhattan distance heuristic is based on the idea of moving along a grid using only horizontal and vertical steps, while the Chebyshev distance heuristic is based on the idea of moving along a grid using only diagonal steps.
The Euclidean distance heuristic is based on the idea of moving along a straight line between two points. The G-value heuristic is based on the idea of using a cost function to determine the optimal path between two points.
Learn more about the heuristic:
https://brainly.com/question/25878205
#SPJ4
movement pattern exhibits the normal pattern of coupling in which is associated with to the side.
Movement patterns that exhibit the normal pattern of coupling in technology involve the use of multiple devices or systems working together in a coordinated manner.
Robotics, automation, and virtual reality involve the use of multiple devices or systems working together in a coordinated manner. Robotics involves the use of robots to perform tasks, automation involves the use of machines to perform tasks, and virtual reality involves the use of computer-generated environments to simulate real-world scenarios. Robotics is the science and technology of designing, constructing, and operating robots. Robots are machines that are programmed to perform specific tasks autonomously or semi-autonomously. Robotics is used in a variety of industries, from manufacturing to healthcare, and is becoming increasingly important in the modern world. Robotics can be used to automate processes, reduce costs, and improve safety and efficiency. Robotics is also used in research and development, as well as in entertainment and education.
Learn more about Robotics here
https://brainly.com/question/30098900
#SPJ4
which of the following could be used to replace steps 3 and 4 so that the algorithm works as intended? responses step 3 increase the value of position by 1. step 4 repeat steps 2 and 3 until the value of count is greater than 100. step 3 increase the value of position by 1 . step 4 repeat steps 2 and 3 until the value of count is greater than 100 . step 3 increase the value of position by 1. step 4 repeat steps 2 and 3 until the value of position is greater than n. step 3 increase the value of position by 1 . step 4 repeat steps 2 and 3 until the value of position is greater than n . step 3 repeat step 2 until the value of count is greater than 100. step 4 increase the value of position by 1. step 3 repeat step 2 until the value of count is greater than 100 . step 4 increase the value of position by 1 . step 3 repeat step 2 until the value of position is greater than n. step 4 increase the value of count by 1.
Steps 4 and 5 could be replaced with the following option to ensure that the method functions as intended:choice D.
What is an algorithm?Steps 4 and 5 could be replaced with the following option to ensure that the method functions as intended:choice DAn algorithm is a regular formula (process) made up of a series of finite steps and instructions that are carried out on a computer system in order to allow software to solve a specific problem under the necessary circumstances.In this case, the following alternatives could be used to swap out stages 4 and 5 so that the algorithm performs as the programmer intended:Step 4: Continue to repeat steps 2 and 3 until position's value exceeds n.Step 5: Show true if count is higher than or equal to (>) 2Display false if not.To learn more about algorithm refer
https://brainly.com/question/27777223
#SPJ4
genetic engineering is possible because the genetic code of all organisms is based on the same _______________. however, all attempts to genetically engineer new organisms are not successful.
Answer:
DNA
Explanation:
particle a of charge 3.03 10-4 c is at the origin, particle b of charge -5.70 10-4 c is at (4.00 m, 0), and particle c of charge 1.05 10-4 c is at (0, 3.00 m). we wish to find the net electric force on c.
The net electric force on c is 51.05N. If a charge is subjected to two or more interactions, the net electric force is the vector sum of those individual forces.
What is net electric force?
When each vector of each electric force of those respective charges is added together, the net electrostatic force exists when any charge or particle goes against each other. Coulomb's law computes the magnitude of the force F between two point charges separated by a distance r, q1 and q2. F=k|q1q2|r²
Here,
rBC =
= 5.00 m
(FAC)ₓ = 0
(FAC)y = |FAC| = Ke (|qA||qC|)/r²AC
= (8.99 x 10⁹N.m²/C²) x (3.00 x 10⁻⁴C)(1.05 x 10⁻⁴) / (3.00m)²
= 30.05N
(FBC)y = |FBC| = Ke (|qB||qC|)/r²BC
= (8.99 x 10⁹N.m²/C²) x (5.70 x 10⁻⁴C)(1.05 x 10⁻⁴) / (5.00m)²
= 21N
Net force = 21N + 30.05N
= 51.05N
To learn more about net electric force refer to :
brainly.com/question/14284308
#SPJ4
motorcycles are extremely hard to see if they are _______.
Answer:low,quiet, if its night if they are black
Explanation:
what is the most utilized renewable resource of the united states? * 1 point wind biomass hydroelectric solar
Wind is the most utilized renewable resource of the United States. According to the U.S. Energy Information Administration, wind energy accounted for 7.3% of total U.S. electricity generation in 2019.
This is more than any other renewable energy source, including biomass, hydroelectric, and solar. Wind energy is generated by the movement of air, which is harnessed by wind turbines. Wind turbines convert the kinetic energy of the wind into electrical energy, which can then be used to power homes and businesses. Wind energy is a clean, renewable, and cost-effective source of energy that can help reduce the United States' dependence on fossil fuels. Wind energy is generated by the movement of air, which is harnessed by wind turbines. Biomass energy is generated by burning organic materials, such as wood, agricultural waste, and animal waste. Hydroelectric energy is generated by the movement of water, which is harnessed by dams and other structures. Solar energy is generated by the sun, which is harnessed by solar panels.
Learn more about wind energy here
https://brainly.com/question/29293441
#SPJ4
a buck converter has an input of 50 v and an output of 25 v. the switching frequency is 100 khz, and the output power to a load resistor is 125 w. (a) determine the duty ratio. (b) determine the value of inductance to limit the peak inductor current to 6.25 a. (c) determine the value of capacitance to limit the output voltage ripple to 0.5 percent.
Duty ratio is a ratio used to measure the amount of time that a particular device or system spends in a specific state.
The required details for Duty ratio in given paragraph
(a) Duty Ratio = Output Voltage / Input Voltage = 25 V / 50 V = 0.50
(b) Inductance, L = (Vin - Vout) / (f x Ipk) = (50 V - 25 V) / (100 kHz x 6.25 A) = 4 µH
(c) Capacitance, C = (Vin - Vout) / ((f x Ripple %) x Vout) = (50 V - 25 V) / (100 kHz x 0.005 x 25 V) = 40 µF
What is duty ratio?
This ratio is often used to measure the amount of on-time versus off-time for a device or system. For example, the duty ratio of a motor might be expressed as the amount of time the motor is running versus the amount of time it is not running. Duty ratio is also frequently used to measure the performance of a system or device, as it can provide insight into how well the system is performing. Duty ratio can be a useful indicator of system performance, as it can provide a measure of how efficiently a system is running.
Duty ratio can also be used to compare the performance of different systems, as it can be an important factor in determining the overall performance of a system.
To learn more about capacitance refer to:
brainly.com/question/27258294
#SPJ4
to be executed, which of the following does python programming language use? group of answer choices calculator interpreter compiler translater
Python has become a popular choice for web development, scripting, scientific computing, artificial intelligence, and more. The Python Programming language uses interpreter.
What is python programming language?
Python is a high-level, interpreted, general-purpose programming language. It is a widely used, versatile language that is easy to learn and has powerful libraries for data manipulation and analysis. It is a cross-platform language that can be used on both Windows and Unix-based systems. Python is known for its readability, making it easier to read and understand. It uses English keywords instead of punctuation and is less verbose than other languages. Its syntax allows programmers to express concepts in fewer lines of code than other languages. Python supports object-oriented, procedural and functional programming paradigms. Python was designed to be easy to use and its source code is available under an open source license.
It has a large, active community of developers and users who share tips, tutorials, and code. As a result, Python has become a popular choice for developers and data scientists.
To learn more about Python program refer to:
brainly.com/question/27996357
#SPJ4
g for the three-bus system whose ybus is given, calculate the second iteration value of v3 using the gauss-seidel method. assume bus 1 as the slack (with v1 5 1.0/08), and buses 2 and 3 are load buses with a per-unit load of s2 5 1 1j0.5 and s3 5 1.5 1 j0.75. use voltage guesses of 1.0/08 at both buses 2 and 3. the bus admittance matrix for a three-bus system is ybus 5 3 2j10 j5 j5 j5 2j10 j5 j5 j5 2j104
The question is asking for the second iteration value of V3 using the Gauss-Seidel method. V3 = 1.0419 - j0.2564
The Gauss-Seidel method is an iterative numerical technique used to solve systems of linear equations. The technique is based on the idea of successively improving the solution of a linear system of equations by iteratively solving for each unknown one at a time.
The steps for calculating V3 using this method are as follows:
1. Calculate the admittance matrix of the system (Ybus):
Ybus =
3 2j10 j5 j5
j5 2j10 j5
j5 j5 2j10
2. Calculate the net complex power injection at each bus:
S1 = 0 (slack bus)
S2 = 1 + j0.5
S3 = 1.5 + j0.75
3. Calculate the initial voltage guess at each bus:
V1 = 1.0/08 (slack bus)
V2 = 1.0/08
V3 = 1.0/08
4. Calculate the power flow equations at each bus:
V1 = 1.0/08
V2 = V1 - Y21 (V2 - V1) + Y22 (V2 - V3) - S2
V3 = V2 - Y32 (V2 - V3) + Y33 (V3 - V1) - S3
5. Use the Gauss-Seidel method to calculate the second iteration value of V3:
V3 = V2 - Y32 (V2 - V3) + Y33 (V3 - V1) - S3
= 1.0/08 - (2j10)(1.0/08 - 1.0/08) + (2j10)(1.0419 - j0.2564 - 1.0/08) - (1.5 + j0.75)
= 1.0419 - j0.2564
To learn more about Gauss-Seidel method refer :
https://brainly.com/question/13567892
#SPJ4
Trojan Horses
Revisit the permissions on the /shared_data/accounting.txt file. Bob is unable to read this file, but he would very much like to know its content.
Bob knows Alice is a fool for ASCII art, and so he creates the /shared data/bob/fun script. View and take a screenshot of this file's contents with an appropriate command (as Bob). Your output should look fun/maybe be some ASCII art.
As Bob, can you modify that script so that if Alice (or Harry) run the script, it will make a copy of the accounting.txt file in a manner that allows Bob to see the content? In other words, when Alice runs the file, Bob gets access to the file
Play around with the permissions and see how far you can get, as Bob, in gaining access to Alice's accounting.txt file. You might want to check the permissions on the /shared_data directory – check out the ls command options for the appropriate flag to do this.
Yes, Bob can change the script to copy the accounting.txt file to a location where he can see it. He can verify the permissions of the /shared_data directory with the ls -l command.
What are permissions for files?The ability to control who can access and modify files is the basis of the theory behind this question. The chmod command, as well as user and group accounts, are used to implement this crucial aspect of computer security.
The following are the procedure's steps:1: To examine the permissions of the /shared_data directory, Bob can use the command "ls -l." He will be able to check to see if Alice has granted him access to the accounting.txt file by using this method.
2: Bob can modify the permissions with the chmod command if they are incorrect. Bob will be able to read the file due to this.
3: Bob can develop a script to move the accounting.txt file to a location where he has permission to view it once he has the appropriate permissions. To create the copy, he can use the cp command.
4: Finally, Bob can change the script so that when Alice or Harry run it, the accounting.txt file will be copied in a way that lets Bob see the contents.
What does the Trojan horse virus do?A Trojan, also known as a Trojan horse, is a type of malware that deceives users into thinking a harmless file is what it really is. A Trojan's "payload" is unknown to the user, but it can serve as a delivery vehicle for a variety of threats, similar to the wooden horse used to sack Troy.
Learn more about Trojan Horses :
brainly.com/question/29757000
#SPJ4
which of the following is true about log files? group of answer choices they aid in database roll back log files are optional for each database there can be only one log file per database they should be stored on the same physical disk as data files
The following statements are true about log files:
Log files are essential for databases as they are used to keep track of all changes made to the database.Log files should be stored on a separate physical disk from the data files, as they are used to recover data in the event of a failure.There can be multiple log files per database, depending on the size and complexity of the database.Log files are essential for databases as they are used to keep track of all changes made to the database. Log files contain information about each change that is made to the database, such as the type of change (e.g. insert, update, or delete), the time of the change, and the user who made the change.
This information is used to ensure the integrity of the data, and to recover data in the case of a system crash or corruption. Log files should be stored on a separate physical disk from the data files, as they are used to recover data in the event of a failure. There can be multiple log files per database, depending on the size and complexity of the database.
Learn more about Log files:
https://brainly.com/question/4595770
#SPJ4
using the definition of moment of inertia, calculate ib , the moment of inertia about an axis through point b, for this object. point b coincides with (the center of) one of the spheres (see the figure).
Assuming the object is composed of two spheres of radius R and mass M, the moment of inertia about an axis through point b is given by Ib = 2MR2.
Moment of Inertia
The theory used in this question is the definition of the Moment of Inertia.
This states that the moment of inertia is the rotational inertia of a body about a given rotation axis, equal to the sum of the products of the mass of each particle in the body and the square of its distance from the axis.
Step 1: Define the Moment of Inertia.
The moment of inertia (I) is the rotational inertia of a body about a given rotation axis, equal to the product of the mass of each individual body particle and the square of its angular separation from the axis.
Step 2: Identify the Object. The object consists of two spheres with radius R and mass M.
Step 3: Calculate the Moment of Inertia. Since point b coincides with the center of one of the spheres, the moment of inertia about an axis through point b is given by Ib = 2MR2.
To learn more about Moment of Inertia refer :
https://brainly.com/question/14460640
#SPJ4
a 600-lb tensile load is applied to a test coupon made from 0.625-in. flat steel plate (e=29 msi, n=0.3). determine the resulting change (a) in the 2-in. gage length, (b) in the width of portion ab of the test coupon\
The theory used in this question is Hooke's Law, which states that the amount of stress (force divided by area) applied to an object is proportional to the amount of strain (deformation of the object) caused.
a) The change in the 2-in. gage length is 0.0079 in.
b) The change in the width of portion ab of the test coupon is 0.0035 in.
What is Hooke's Law?
This means that if a certain amount of force is applied to an object, the amount of deformation will be proportional to the force. To answer the question, we can use the formula for Hooke's Law, which is:
Stress = E x Strain
where E is the Modulus of Elasticity of the material and Strain is the change in length of the object divided by its original length.
Since we know the tensile load (600 lb) and the modulus of elasticity (E = 29 msi) of the material, we can calculate the strain of the object.
Strain = Stress / E
= 600 lb / 29 msi
= 0.0207
This means that the object will be deformed by 0.0207.
We can then calculate the change in the 2-in. gage length using the formula:
Change in Length = Original Length x Strain
= 2 in. x 0.0207
= 0.0079 in.
We can similarly calculate the change in the width of portion AB of the test coupon, using the formula:
Change in Width = Original Width x Strain
= 0.625 in. x 0.0207
= 0.0035 in.
To learn more about Hooke's Law refer :
https://brainly.com/question/2648431
#SPJ4
three different materials, designated a, b, and c, are tested in tension using test specimens hav- ing diameters of 0.505 in. and gage lengths of 2.0 in. (see figure). at failure, the distances between the gage marks are found to be 2.13, 2.48, and 2.78 in., respec- tively. also, at the failure cross sections, the diameters are found to be 0.484, 0.398, and 0.253 in., respectively. determine the percent elongation and percent reduction in area of each specimen. using your own judgment, classify each material as brittle or ductile.
The first material(a) is a Brittle material and The last material(c) is a Ductile material.
What is a Ductile and Brittle material ?A material's ductility refers to its capacity to withstand plastic deformation or drawing without breaking. As a result, it provides information on how "soft" or pliable the material is. The types and concentrations of alloying elements present affect the ductility of steels in different ways.
A material's susceptibility to drawing is referred to as a mechanical attribute as ductility. The degree to which a material can withstand plastic deformation under tensile stress before failing is known as ductility in the field of materials research. In engineering and manufacturing, ductility is a crucial factor.
Glass, ceramic, graphite, and certain alloys with very low plasticity are examples of brittle materials. In these materials, fractures can start without plastic deformation and quickly progress to brittle breaking.
Diameter of the materials are 0.505 in
Diameter after appling tension in each material 0.484, 0.398 and 0.253 in
Initial length of the materials are 2 in
Length after appling tension in each material 2.13, 2.48 and 2.78 in
We can observe that the first material is not elongating that much as well as is not changing its diameter that much so the material can be classified as Brittle.
Again, We can observe that the last material is elongating maximum as well as its diameter changed maximum so the material can be classified as Ductile..
To learn more about Material properties refefr to :
https://brainly.com/question/14959576
#SPJ4
The variable isOpen is to be used to indicate whether or not a store is currently open. Which of the following the most appropriate data type for isOpen?
A. Boolean
B. number
C. string
D. list
The most appropriate data type for is Open is a Boolean. Correct answer: letter A.
A Boolean is a data type that can only have one of two values, either true or false. In this case, the value of is Open would be true if the store is open, and false if it is closed.
Variables are used to store data or values in a program. There are different types of variables depending on the type of data they are used to store.
The most common types of variables are numerical variables which are used to store numeric values such as integers and floats, string variables which are used to store text or character values, Boolean variables which are used to store true or false values, and lists which are used to store multiple values. Each type of variable has its own characteristics and can be used in different ways to create more complex programs.
Learn more about Boolean:
https://brainly.com/question/26041371
#SPJ4
The orifice tube should be replaced if the compressor comes apart internally because
it can catch debris from the compressor and become clogged.
true
false
The statement given is TRUE.
What is a Compressor?A compressor is a mechanical device that lowers a gas's volume while raising its pressure. One particular kind of gas compressor is an air compressor. Pumps and compressors are comparable in that both raise the pressure on a fluid and can move it through a pipe.
Hence, it can be seen that the orifice tube should be replaced if the compressor comes apart internally because it can catch debris from the compressor and become clogged.
Read more about compressors here:
https://brainly.com/question/29345949
#SPJ1
for the circuit in fig. p3.82 choose the value of rl so that the power dissipated in it is a maximum
The Venn equivalent circuit, as seen by rl, has a 4.165 mw value such that the load average power is maximum.
Thevenin’s theorem states that any linear active bilateral network made up of energy sources, resistances, etc. with defined open output target terminals may be transformed into a straightforward network made up of a voltage source connected in series with a resistance. Maximum Power Transfer Theorem: When the load resistance is equal to the equivalent source resistance as seen by it, maximum power is transmitted to the load in any linear active bilateral network made up of energy sources and the internal resistances that derive an external load. Rth: During Rth calculation, independent voltage source and Independent current source experience short-circuiting and open-circuiting, respectively.
Learn more about Thevenin’s theorem here:
https://brainly.com/question/29801802
#SPJ4
what is providing the upward force to propel the rocket into space?
The gravity of earth
what are some of the newest fuel injectors use wafers of quartz or ceramic alloys that expand slightly when voltage is applied called
Some of the newest fuel injectors use wafers of quartz or ceramic alloys that expand slightly when voltage is applied, and these are called piezoelectric fuel injectors.
Piezoelectric fuel injectors use a piezoelectric material, such as quartz or ceramic alloys, to create a small electric charge when voltage is applied. This electric charge causes the wafer to expand slightly, which in turn opens the fuel injector and allows fuel to be injected into the engine. Piezoelectric fuel injectors are more efficient and reliable than traditional fuel injectors, and they are becoming increasingly popular in modern vehicles. The piezoelectric material used in these fuel injectors is very durable and can withstand high temperatures and pressures, making them ideal for use in modern engines. Additionally, the piezoelectric material is very responsive, allowing for precise control of the fuel injection process. This makes piezoelectric fuel injectors ideal for use in modern engines, as they can provide more efficient and reliable fuel injection.
Learn more about Piezoelectric fuel injectors here
https://brainly.com/question/29690670
#SPJ4
xianghu and yunshu recently learned the asymptotical analysis. the key idea is to evaluate the growth of a function
The key idea is to evaluate the growth of a function by analyzing its limiting behavior as the input approaches a certain value or infinity.
Asymptotical analysis
Asymptotical analysis is a great tool for analyzing the efficiency of algorithms. By understanding how the algorithm performs in different scenarios, Xianghu and Yunshu can make informed decisions and select the best algorithm for their needs.
This knowledge can save them time and resources, as they will be able to quickly select the most efficient algorithm for their tasks.
They are using this technique to analyze the efficiency of various algorithms. they have discovered that some algorithms are better at handling large datasets,
While others perform better on small datasets. this knowledge is helping them to choose the best algorithm for their tasks.
Asymptotical analysis is a great tool for analyzing the efficiency of algorithms.
By understanding how the algorithm performs in different scenarios, Xianghu and Yunshu can make informed decisions and select the best algorithm for their needs.
This knowledge can save them time and resources, as they will be able to quickly select the most efficient algorithm for their tasks.
To learn more about Asymptotical analysis refer :
https://brainly.com/question/28333656
#SPJ4
Help with answering questions
Simply put, the thread form is how the thread is arranged in an axial plane and is made up of the crest, root, and flanks.
What are the different types of threads?Simply put, the thread form is how the thread is arranged in an axial plane and is made up of the crest, root, and flanks.The threads' crests and roots are at their tops and bottoms, respectively, with the flanks connecting them.Six of the most popular thread types:NPT and NPTF. UN/UNF.BSPP (BSP, parallel) (BSP, parallel).metric parallel BSPT, or BSP with a taper.Measured in metric.In terms of thread form, we mean the screw thread's profile.Thread standards that specify thread form, series, class, allowance, tolerance, and designation are often published per thread form.Be aware that different standards use different methods to identify screw threads.To learn more about threads refer
https://brainly.com/question/29212867
#SPJ1
given a channel with intended capacity of 90 mbps, the bandwidth of the channel is 8 mhz.what signal-to-noise ratio is required to achieve this capacity?
The signal-to-noise ratio required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz is 18 dB.
The signal-to-noise ratio (SNR) is a measure of the ratio of the signal power to the noise power in a communication system. The SNR required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz can be calculated using the Shannon-Hartley theorem. According to this theorem, the SNR required to achieve a channel capacity of C Mbps with a bandwidth of B MHz is given by SNR = (C x log2(1 + S/N))/B. In this case, the SNR required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz is (90 x log2(1 + S/N))/8 = 18 dB.
Learn more about signal-to-noise ratio here
https://brainly.com/question/21988943
#SPJ4
a design team is developing a prototype co 2 cartridge for a manufacturer of rubber rafts. this cartridge will allow a user to quickly inflate a raft.
A prototype is produced, tested, and then modified as necessary until an acceptable result is obtained from which the entire system or product can be developed using the prototyping model, which is a systems development technique.
Explain about the prototype?Developed to test a concept or procedure, a prototype is an early sample, model, or release of a product. Its usage spans a wide range of fields, including software development, design, electronics, and semantics. In most cases, system analysts and users will use a prototype to assess a new design that will improve precision.
An early or initial model of something, such a machine, is called a prototype. From the prototype, new forms are created or replicated. The prototype is what the aeronautical engineers design and test on in the research and development division of a corporation that, for instance, manufactures flying machines.
To learn more about prototype refer to:
https://brainly.com/question/27896974
#SPJ4
after passing another vehicle on the highway, what is the best indication that it is safe to retrun to the lane in front of the vehicle that is passed
If five or more cars are following you while you are travelling on a two-lane roadway where passing is dangerous, turn around.
A highway or highway with only one lane of traffic in each direction and typically no intermediate obstacles is referred to as a double carriageway or dual carriageway. It might have been constructed thus way because to limitations or space set aside for expansion as traffic volumes rise. Example of a two-lane road showing that passing is allowed Markers for two lanes, with overtaking allowed in both directions. A yellow centreline marking with a dash in the middle designates a two-lane road. Arrows show direction. One lane in each direction of travel. It might have been constructed thus way because to limitations or space set aside for expansion as traffic volumes rise. If five or more cars are following you while you are travelling on a two-lane roadway where passing is dangerous, turn around.
Learn more about Dual carriageway here:
https://brainly.com/question/29510481
#SPJ4
A raised plaster cover (ofen called a plaster ring or mud ring) is permitted to increase the maximum n conductors permitted in an outlet box when it is a. listed as a box extension b. by the same manufacturer as the box c. marked with its cubic-inch volume d. metallic and capable of being grounded
Answer is option B) by the same manufacturer as the box.
What is the box of an outlet called?
The answer is based on the specifications provided by the manufacturer of the outlet box. The box of an outlet is typically called an electrical box or outlet box. It is used to house the electrical wiring and components of an outlet, such as the receptacle, switches, and wiring. It is usually made of metal or plastic to provide protection from shocks and short circuits. Outlet boxes come in various sizes and shapes depending on the type of outlet and the number of wires it needs to contain. A raised plaster cover is a device used to increase the maximum number of conductors allowed in an outlet box. It is typically listed as a box extension and marked with its cubic-inch volume.
The plaster cover must also be metallic and capable of being grounded. In order for the plaster cover to be accepted, it must be from the same manufacturer as the box.
To learn more about outlet box refer :
https://brainly.com/question/25878272
#SPJ4
When using a micron gauge, if the pressure gauge falls from 1,300 to 1,000 instantly,
the vehicle needs to:
be moved to a warmer environment.
be started up and accelerated to 1500 RPMs.
be left alone with the vacuum pump running for another hour.
None of the answers listed
Part A Is the section made by the procedure of sections 0 if a body experiences a loading component? coplanar loading scheme
What does the word "component" signify in terms of health?
Component. a series of neurons constituting a functional system for carrying the afferent and efferent impulses in the somatic and splanchnic processes of the body. The most recent revision was made on July 23rd.
The bits that make up something are its components. A nuclear weapon's essential ingredient is enriched uranium. The management strategy is composed of four key parts.
Know more about procedure, Visit:
https://brainly.com/question/27176982
#SPJ1
A plane flying through the air can be modeled like a particle. Which of the following forces should be included on the free body diagram?
a. the thrust from the engines
b. the friction of the air
c. the weight of the plane
d. the lift from the wings
e. the force connecting the wing to the plane
The push from the engines, air friction, the weight of the plane, the lift from the wings, and the force attaching the wing to the plane are the forces that need to be shown on the free body diagram
A free body diagram is a technique used to examine a particle's motion by taking into account all of the forces that are exerting pressure on it. The thrust from the engines, air friction, the weight of the plane, lift from the wings, and the force linking the wing to the plane should all be represented on the free body diagram when simulating a plane traveling through the air as a particle. The force moving the plane forward is the thrust from the engines. The force that the plane must overcome to move through the air is air friction. Gravity is dragging the plane down because of the weight of the aircraft.
Learn more about plane here-
https://brainly.com/question/29511090
#SPJ4