How much force does a 35 kg child have that is running through the house at an acceleration of 20 m/s^2?

Answers

Answer 1

Answer:

The answer is 700 N

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question

mass = 35 kg

acceleration = 20 m/s²

We have

force = 35 × 20

We have the final answer as

700 N

Hope this helps you


Related Questions

If a hypothesis is.......
additional tests should be done to ensure accurate results.
a. correct
b.incorrect
c. unknown
d. inconclusive

Answers

Answer:

a correct

Explanation:

a hypothesis is a supposition made of a basis of limited evidence

I think the answer is a: correct

a meteor Falls towards Earth's surface given that the acceleration due to gravity is 9.8 m/s^2 what is the meteors potential energy if it has a mass of 20kg at an altitude of 500

Answers

Answer: It’s 98,000

Explanation: Just did it on apex

The frequency of a F-sharp sound wave in music is 370 Hz, and its wavelength is 0.93 m. what is the wave speed?

Answers

Answer:

wave speed =344.1 m/s

using v=fΠ

where v is the speed

The wave speed will be 344.1 m/sec. The wave speed is found as the product of the wavelength and the frequency of the wave.

What is wavelength?

The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.

The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.

The given data in the problem is;

v is the speed = ?

f is the frequency= 370 Hz

λ is the wavelength of the wave=0.96 m

The relationship between the wave's wavelength, frequency, and speed is given as;

wavelength = speed of wave / frequency

[tex]\rm \lambda = \frac{v}{f} \\\\ v = \lambda \times f \\\\ v = 0.93 \times 370 \ Hz \\\\ v= 344.1 \ m/sec[/tex]

Hence, the wave speed will be 344.1 m/sec.

To learn more about the wavelength, refer to the link;

brainly.com/question/7143261

#SPJ2

Tim Kylie is one of the world's top chefs. He is best known for his signature dish, triple-dipped chip steak. This masterpiece contains over a pound of beef braised in duck fat. Another of Chef Kylie's more celebrated dishes is the Hamslaughter Supreme. This dish features ham stuffed sausage links presented in a basket made of braided bacon. While carnivores around the world roar for Chef Kylie's creations, it is unlikely that Chef Kylie will dine with them. As a longtime vegan, Chef Kylie would never dream of devouring one of his own dishes. What type of irony? explain your answer


Answers

Answer:

situational irony

Explanation:

Based on the scenario being described, this seems to be an example of situational irony. That is because the irony in this scenario is that Tim's most popular and world-renown cooking creations are made of meat but Tim is a vegan and does not consume meat, which all revolves around the situation that Tim is in. Since he can't enjoy the meals with his fans because he does not eat the ingredients in his own creation. Therefore, being specific to the situation that Tim has created.

A book with a mass of 1kg is dropped from a height of 3m . What is the potential energy of th book when it reaches the floor?​

Answers

Answer:

30 J

Explanation:

height = 3 m

mass = 1kg

acceleration due to gravity = 10m/s²

Potential Energy = mass× gravity × height

= 1kg ×10m/s²× 3m

= 30 J

The force of gravity depends on the mass of objects and the distance between them. TRUE OR FALSE?

Answers

It is TRUE, Force is proportional to the product of the masses and inversely proportional to the square of the distance between them.

The force of gravity depends on the mass of objects and the distance between them. This is true statement.

What is force?

Physics defines force as the push or pull that modifies the velocity of a massed object.

The ability to change a body's resting or moving condition is referred to as an external force. There is a magnitude and a direction to it.

You may determine the Force using a spring balance. The SI's measure of force is the Newton.

The force of gravity between two objects is directly proportional to the mass of the object and inversely proportional to the square of the distance between them.

Hence, the force of gravity depends on the mass of objects and the distance between them. This is true statement.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ2

Fy is the reaction force from Plate Y. What Statement best describes the action and reaction forces on the plates? Tectonic plates

Answers

Answer:

According to Newton's third law of motion, the reaction force is equal to the action force.

Explanation:

Newton's third law of motion states that for every action there is an equal and opposite reaction. This means that if one object exerts a force on a second object, the second object exerts an equal force in the opposite direction. When Plate X pushes on Plate Y with the action force (Fx), Plate Y must push back with an equal force (Fy).

Therefore, the best explanation is that according to Newton's third law of motion, the reaction force is equal to the action force.

For every action, there has equal and opposite reaction - this statement best describes the action and reaction forces on the plates.

What is Newton's 3rd law of motion?

As a result of this interaction, there are two forces: one from plate X and one from plate Y. The third law of motion of Newton deals with these two forces, which are referred to as action and reaction forces. Newton's third law is officially expressed as follows: There is an equal and opposite reaction to every action.

The implication of the statement is that there are always two forces acting on the two interacting objects. The force acting on the first object is equal in size to the force acting on the second. The force acting on the first object is acting in the opposite direction to the force acting on the second object. Force pairs—equal and opposing action-reaction force pairs—always exist in pairs.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ5

Lincoln can run at a speed of 3 m/s. How long would it take him to run 200 meters?

Answers

Answer:Answer is 66.66666666666667

Explanation:all you have to do is divide 200/3

Answer:

66 seconds

Explanation:

time=distance/speed

200/3=66.6

I WILL GIVE BRAINLIEST A battery contains two metals that have different tendencies to attract electrons. If one is lithium with an electron affinity of −3.05, and the other is zinc with an electron affinity of −0.76, describe how the electrons will flow. Then, describe how you could make this an even stronger battery. (4 points)

Answers

Answer:

electrons will flow from lower (lithium) to higher (zinc)

You can make a stronger battery by having a larger electron affinity difference.

Hope this helps \(-._.-)/

what is the medium of the sound waves the student hears

Answers

Answer:

A

Explanation:

the air is the medium man

Answer:

the desk

Explanation:

If a ball is rolled down a frictionless inclined plane from a height of 3 feet, to what height would it roll up to on the other side?

Answers

Answer:

It will roll up to its initial height from which it rolled from on the first hill

Explanation:

The given information are;

The height from which the ball is rolled = 3 feet[

The equation of the potential energy of the ball as it rolled down the frictionless inclined plane is given by the following equation;

m × g × h₁ = 1/2 × m × v² + 1/2×[2/5× m × r²) × [v/r]

Where;

m = The mass of the ball

h = The from which the ball is rolled down

v = The velocity of the ball

r = The radius of the ball

Therefore, all the potential energy, m × g × h, is converted into kinetic energy when the ball reached the ground

Similarly, as the ball rolls up on the other side, by the principle of energy conservation, all the kinetic energy is transformed into potential energy as follows

1/2 × m × v² + 1/2×[2/5× m × r²) × [v/r] = m × g × h₂, therefore, we have;

1/2 × m × v² + 1/2×[2/5× m × r²) × [v/r] = m × g × h₁ =  m × g × h₂

Therefore since m × g × h₁ =  m × g × h₂, then h₁ = h₂, the ball rises to the same height it started rolling from on the first hill.

I need help with this physics question

Answers

Answer
B.
Your welcome I just finished that same test

a student pushes a book with a force of 5 N to the east.which statement
describes the reaction force?

Answers

Answer:

5N westward, acting on the student

Explanation:

Answer: 5N westward, acting on the student

Explanation:

what caused earths continents to drift apart?

Answers

Answer:

bada bop boop pow

Explanation:

A 2000 kg car moves along a horizontal road at speed vo

15.9 m/s. The road is

wet, so the static friction coefficient between

the tires and the road is only pls 0.105 and

the kinetic friction coefficient is even lower,

= 0.0735.

The acceleration of gravity is 9.8 m/s2.

What is the shortest possible stopping dis-

tance for the car under such conditions? Use

g= 9.8 m/s² and neglect the reaction time of

the driver.

Answer in units of m.

Answers

Answer:

The shortest possible stopping distance of the car is 175.319 meters.

Explanation:

In this case we see that driver use the brakes to stop the car by means of kinetic friction force. Deceleration of the car is directly proportional to kinetic friction coefficient and can be determined by Second Newton's Law:

[tex]\Sigma F_{x} = -\mu_{k}\cdot N = m \cdot a[/tex] (Eq. 1)

[tex]\Sigma F_{y} = N-m\cdot g = 0[/tex] (Eq. 2)

After quick handling, we get that deceleration experimented by the car is equal to:

[tex]a = -\mu_{k}\cdot g[/tex] (Eq. 3)

Where:

[tex]a[/tex] - Deceleration of the car, measured in meters per square second.

[tex]\mu_{k}[/tex] - Kinetic coefficient of friction, dimensionless.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

If we know that [tex]\mu_{k} = 0.0735[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then deceleration of the car is:

[tex]a = -(0.0735)\cdot (9.807\,\frac{m}{s^{2}} )[/tex]

[tex]a = -0.721\,\frac{m}{s^{2}}[/tex]

The stopping distance of the car ([tex]\Delta s[/tex]), measured in meters, is determined from the following kinematic expression:

[tex]\Delta s = \frac{v^{2}-v_{o}^{2}}{2\cdot a}[/tex] (Eq. 4)

Where:

[tex]v_{o}[/tex] - Initial speed of the car, measured in meters per second.

[tex]v[/tex] - Final speed of the car, measured in meters per second.

If we know that [tex]v_{o} = 15.9\,\frac{m}{s}[/tex], [tex]v = 0\,\frac{m}{s}[/tex] and [tex]a = -0.721\,\frac{m}{s^{2}}[/tex], stopping distance of the car is:

[tex]\Delta s = \frac{\left(0\,\frac{m}{s} \right)^{2}-\left(15.9\,\frac{m}{s} \right)^{2}}{2\cdot \left(-0.721\,\frac{m}{s^{2}} \right)}[/tex]

[tex]\Delta s = 175.319\,m[/tex]

The shortest possible stopping distance of the car is 175.319 meters.

What is a scientific theory?

Answers

Answer:

Scientific theories are explanations of some aspect of the natural world based on repeated observations.

Hope this helps!!!!

Answer:

The way that scientists use the word 'theory' is a little different than how it is commonly used in the lay public," said Jaime Tanner, a professor of biology at Marlboro College. "Most people use the word 'theory' to mean an idea or hunch that someone has, but in science the word 'theory' refers to the way that we interpret facts.

Explanation:

Using only one management style with all people is the most effective leadership technique for any organization.

Answers

Answer:

False

Explanation:

More than one management style with all people is the most effective leadership technique for any organization. So, the given statement is False.

What is Leadership technique?

Leadership styles are defined as those adopted by company leaders to increase efficiency, satisfaction, growth and advancement in all positions in the organization. It requires a different style in different situations and each leader needs to know when to show a special behavior.

These strategies define every leader's personal leadership style. Some effective leadership Techniques are as follows:

Understanding the objectives clearlyGet to know the teamAlways be a learnerListen.Learn to delegate.

Thus, more than one management style with all people is the most effective leadership technique for any organization. So, the given statement is False.

Learn more about Marketing techniques, here:

https://brainly.com/question/29843697

#SPJ2

The mining-resource cycle determines the use of ore materials. Which step is not part of the cycle?

A)
exploring and extracting ores
B)
refining ores and creating products from ore materials
C)
marketing and selling products that use ore materials
D)
recycling and disposing of wastes from the steps and the products

Answers

Answer:

c) marketing and selling products that use ore materials

how many apples are in 29 trees if each tree has 45 apples?

Answers

Answer:

1305 I think but not sure

Its 1305 because 29 x 45 = 1305

What does Newton's third law describe?
A. Equal and opposite forces
B. How the amount of mass influences the amount of force needed
to move an object
C. The tendency of moving objects to stay in motion
D. The attractive force between two objects due to their masses

Answers

A. Equal and opposite forces

Explanation:
History law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exert an equal and opposite force on object A

1.) A hover disc is moving across a wooden floor with a constant velocity and virtually no friction. The soccer
disc runs into a baseball, which applies a force of 5 N opposing the motion of the disc. What will happen to
the soccer discs velocity

Answers

Answer:

The soccer discs will be change.

Explanation:

Given that,

Opposing force = 5 N

We know that,

Drag force :

Drag force is directly proportional to the square of velocity.

[tex]F_{d}\propto v^2[/tex]

[tex]F_{d}=\dfrac{1}{2}C\rho Av^2[/tex]

Where, C = drag constant

[tex]\rho[/tex] = density

A = area

v= velocity

We need to find what happen to  the soccer discs velocity

According to drag force,

If we applies a force of 5 N opposing the motion of the disc then the velocity of the soccer discs will be change.

Hence, The soccer discs will be change.

Tech A says that some electric actuators are positioned by an A/C ECU which checks the air flow with sensors. Tech B says that electric actuators are positioned by an A/C ECU and some actuators have a potentiometer to tell the A/C ECU the position of the door. Who is correct?

Answers

Answer:

Tech B

Explanation:

The control of electric actuators may be through through a two-wire or a five-wire circuit through the driver circuit by bidirectionally controlling via the motor wire polarity. The door position is determined by counting the actuator commutator pulses by the control module in the actuator with 2-wire, while the actuator with 5-wire uses potentiometer feedback.

The A/C ECU is the Air Condition Engine Control Unit.

does anyone know how to do this

Answers

i had a test similar to this but i don’t remember sry. good luck with it all i know is t = 4m

After she’s finished cooking Emily measures the mass of the dough balls. According to the law of conservation of mass, the mass of the dough bars should be equal to

Answers

Answer:

The weight of the dough bars after being cooked.

HELP ME PLEASE. i need to turn this in by tomorrow, also pls use the words above^ thank you i’ll mark u the brainliest.

Answers

Answer:

the corrdct answer is core

Given 1 inch ≡ 2.54 cm and 1 foot ≡
12 inches, how many square centimeters are
in 3.22 ft2
?

Answers

Answer:

2991.47 [cm^2]

Explanation:

To solve this problem we must perform a dimensional analysis and use the corresponding conversion values:

[tex]3.22[ft^{2}]*\frac{12^{2}in^{2} }{1^{2}ft^{2}} *\frac{2.54^{2}cm^{2} }{1^{2}in^{2} } \\2991.47[cm^{2}][/tex]

What is an important property about the wires of a circuit?​

Answers

Answer:

That they conect the curcut and porvide electricity.

Explanation:

Answer:the wires must be conducted so that they allow for electrons to flow through the material

Explanation:

What is a good question for a Science Fair (7th grade advanced) also im an online student so nothing really physical something that can really explain thru pictures. I just want suggestions thank you.

Answers

Photosynthesis is a good one you can really explain with pictures

A battery of emf 24v and terminal resistance 4 ohms is connected to a resistor of 32 ohms. What is the terminal pd of the battery?​

Answers

Answer:

21.3V

Explanation:

Explanation

E = V + Ir

V = E- Ir

V = 24 - {(24/36) x 4}

V = 21.3V

A ball of mass 200 g rolls along the ground at a speed of 5.2 m/s. Calculate the kinetic energy of the ball.

Answers

Answer:

We have a mass of 200g (0.2kg) moving at 20m/s

Kinetic Energy KE = ½ mv^2 where m is mass and v is velocity

Actually, v is a vector quantity, so KE = ½ mv•v

The dot product of 2 vectors a and b is abCosθ where θ is the angle between the vectors.

Obviously v•v = v^2 Cos0 = v^2

In this case, we have KE = ½ (0.2)(20^2) = 40kg-m^2/s^2 = 40J

So we have kinetic energy in the amount of 40 Joules.

Explanation:

The right answer is "2.7 J"

Answer explanation:

Remember to convert grams to kilograms first by dividing by 1000.

Kinetic energy

= 1/2 × mass × speed2

= 1/2 × 0.2 kg × (5.2 m/s)^2

= 2.7 J (to 2 sig. fig.)

Hope it helps ✨✨

Other Questions
Selena learns that, as specialized cells mature, certain organelles increase inquantity while other organelles may disappear. She also learns that muscle cellsrequire large quantities of energy in the form of ATP. Based on this, she can predictthat muscle cells would contain an unusually high number ofA LysosomesB RibosomesC Rough endoplasmic reticulumD Mitochondria Pls help due tonight, I just found the assignment !Will give brainly for the correct answer Assume you are using an array-based queue and have just instantiated a queue of capacity 10. You enqueue 5 elements, dequeue 5 elements, and then enqueue 1 more element. Which index of the internal array elements holds the value of that last element you enqueued what do people like about exploring the map Who is a ruler in India?kingministerpharaohrajah A company sells widgets. The amount of profit, y, made by the company, is related to the selling price of each widget, x, by the given equation. Using this equation, find out what price the widgets should be sold for, to the nearest cent, for the company to make the maximum profit.y=-10x^2+600x-3588y=10x 2 +600x3588 whats 105 to the power of 20 pls help its big question they asked him a lot of question his jobA for B about C on what was significant about ancient Chinese art Polynomial A: 4z + 724 - 7y+7Polynomial B: 2.c + 12y - 12z - 7What will be the coefficients for x, y, and z in the resulting sum?Select all that apply.-8-5-5259Asse16SectGO BACKSUBMIT AND CONTINUE284691-1307 List the names and measures for pairs of alternate Interior angles. Group them together. Then list the names and measures for pairs of alternateexterior angles. multiply the polynomials below. SHOW ALL WORK(x7)(2x5) What makes a question a statistical question? With _______, a health professional should make the clinical environment colorful and attractive to distract attention away from procedures. Lewis diagrams of molecules of three different hydrocarbons are shown above. Which of the following claims about the molecules is best supported by the diagrams? find the mean of the given data 8,7,5,9,6,13 HELP!!The status of Greer County was determined through the Supreme Court ruling in which case?A Indian Territory United States (1901)B. Oklahoma v. United States (1889)C. United States v. Texas (1896)D. Oklahoma Territory v Texas (1906) In the ionic compound KCL, which ion is the cation, and which is the anion? PLEASE HELP A data unit created at the transport layer by UDP is a _____.A. segmentB. packetC. datagramD. frame Writing proportional equations from tablesCCSS.Math: 7.RP.A.2EmailThe following table shows a proportional relationship between j and m?jm431292015Write an equation to describe the relationship between j and m.