This question involves the concepts of the thin lens formula, focal length, and image distance.
The image of the house is "16 ft" away from the lens.
According to the thin lens formula:
[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}[/tex]
where,
f = focal length = 8 ft
p = object distance = 16 ft
q = image distance = ?
Therefore,
[tex]\frac{1}{8\ ft}=\frac{1}{16\ ft}+\frac{1}{q}\\\\\frac{1}{q}=\frac{1}{8\ ft}-\frac{1}{16\ ft}\\\\\frac{1}{q}=0.125\ ft^{-1}-0.0625\ ft^{-1}\\\\q=\frac{1}{0.0625\ ft^{-1}}\\\\[/tex]
q = 16 ft
Learn more about the thin lens formula here:
https://brainly.com/question/3074650
Question 4 of 10
What is thermodynamics?
A. The movement of matter
B. The flow of fluids
C. The movement of particles
D. The flow of energy, heat, and work
SUBMIT
Answer:
Explanation:
D.
Thermodynamics is the study of how different types of energy is transferred through the chemical systems
Answer: Thermodynamics is the flow of energy, heat, and work.
Explanation: This is seen in the formula for the first law of thermodynamics, U = Q - W, or “The change of the internal energy of a system (U) is equal to the heat absorbed (Q) minus the work done by that system (W).”
A 5 kilograms bowling ball is dropped out a window. It hits the ground, and bounces upward. The velocity change of the ball is noted to be 15 m/s downward and 12 m/s upward. What is the contact time for the ball if the force applied on the ball from the ground is equal to 10 N?
Answer:
13.5
Explanation:
Mass: 5kg
Initial Velocity: -15
Final Velocity: 12
Force: 10
We can use the equation: Vf = Vi + at
We need to find acceleration, and we can use the equation, F=ma,
We have mass and the force so it would look like this, 10=5a, and 5 times 2 would equal 10, so acceleration would be 2.
Now we have all the variables to find time.
Back to Vf = Vi + at, plug the numbers in, 12 = -15 + 2(t)
Plugging them in into desmos gives 13.5 for time.
What initial speed v is required if the blocks m1 =2.5 kg and m2=1.5 kg are to travel a distance d =7.0cm before coming to rest? Assume the coefficient of kinetic friction between m1 and the tabletop is ųk=0.21
Answer:
OPTRIMUM PRIDE URGH URGH URGH
Explanation:
AHHAAHAHAHAHA
WILL GIVE BRAINLIEST!!! NO LINKS PLZ!!!!
A 225 g hockey puck is sliding on ice in an arena towards the end boards that are 15.7 m away. The puck is travelling 12.0 m/s when it slides into some rough ice (coefficient of kinetic friction= 0.550).
Determine:
a) the acceleration of the puck on the rough ice.
b) the distance from the end boards the puck is when it comes to a stop.
Please show work.
Answer:
Explanation:
a) the acceleration of the puck on the rough ice.
a = μg = 0.550(9.81) = 5.3955 = 5.40 m/s²
(comes from μ = F/N = ma/mg = a/g)
b) the distance from the end boards the puck is when it comes to a stop.
v² = u² + 2as
0² = 12.0² + 2(-5.40)s
s = 13.3 ft
so distance from the boards is
15.7 - 13.3 = 2.4 m
by the way...that's some VERY rough ice...more like sand.
5.000 km =
3.125
mi
8.000 fl oz =
mL
Answer:
236.588 mL
Explanation:
The formula for an approximate result is to multiply the volume value by 29.574
[tex]8.000 \times 29.574 = 236.588[/tex]
Is that what you were asking for?
8 N to the left , and 4 N to the right. Find the net force. Is this balanced?
Explanation:
12N by first law of newton is net force after colloision
A 300 cm rope under a tension of 120 N is set into oscillation. The mass density of the rope is 120 g/cm. What is the frequency of the first harmonic mode (m
Answer:
Explanation:
f = [tex]\sqrt{T/(m/L)} / 2L[/tex]
T = 120 N
L = 3.00 m
(m/L) = 120 g/cm(100 cm/m / 1000 g/kg) = 12 kg/m
(wow that's massive for a "rope")
f = [tex]\sqrt{120/12} /(2(3))[/tex])
f = [tex]\sqrt{10\\}[/tex]/6 = 0.527 Hz
This is a completely silly exercise unless this "rope" is in space somewhere as the weight of the rope (353 N on earth) far exceeds the tension applied.
A much more reasonable linear density would be 120 g/m resulting in a frequency of √1000/6 = 5.27 Hz on a rope that weighs only 3.5 N
If you apply a net force of 100 N to the hoverboard, and it accelerates
2m/s/s, how much mass does it have?
Answer:
50 kgExplanation:
The mass of an object given only the force acting on it and it's acceleration can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force in N
a is the acceleration in m/s²
From the question
f = 100 N
a = 2 m/s²
We have
[tex]m = \frac{100}{2} = 50 \\ [/tex]
We have the final answer as
50 kgHope this helps you
A wheel in the shape of a flat, heavy, uniform, solid disk is initially at rest at the top of an inclined plane of height 2.00 m when it begins to roll down the incline. If rolling and sliding friction are neglected, what is the linear velocity, in m/s, of the center-of-mass of the wheel when it reached the bottom of the incline?
Answer:
Explanation:
If friction is neglected, the wheel cannot roll and can only slide frictionlessly and will have the same velocity at the bottom of the ramp as if it had been in free fall as it has converted the same amount of potential energy.
mgh = ½mv²
v = √(2gh) = √(2(9.81)(2.00)) = 6.26418... = 6.26 m/s
However if we do not ignore all friction and the wheel rolls without slipping down the slope, the potential energy becomes linear and rotational kinetic energy
mgh = ½mv² + ½Iω²
mgh = ½mv² + ½(½mR²)(v/R)²
2gh = v² + ½v²
2gh = 3v²/2
v = √(4gh/3) =√(4(9.81)(2.00)/3) = 5.11468... = 5.11 m/s
Kyle, a 23-year-old-male, feels as if he is always on the “edge of his seat,” as if something is going to happen. He also has problems sleeping. Kyle feels nervous continuously and cannot seem to relax. When asked if he is nervous about something in particular, he can’t pinpoint the source of his anxiety.
Based on the information given, it can be posited that Kyle has a general anxiety disorder.
Generalized Anxiety Disorder is a disorder that is characterized by persistent and excessive worry about different things. People with the disorder may anticipate disaster and are concerned about money, health, family, or other issues.
Some of the effective ways of treatment are spending more time with family and friends, doing regular exercises , enough sleeping, etc.
Learn more about disorder on:
https://brainly.com/question/25771019
A 20 metric ton train moves toward the south at 50 m/s. At what speed must it travel to have four times its original momentum
Answer:
200 m/s
Explanation:
as momentum is a product of mass and speed, and mass is not changing, four times the speed will result in four times the momentum.
p = mv
4p = m(4v)
At 200m/s velocity of the train, the momentum of the train will be four times its original momentum. This is because the velocity is directly proportional to the momentum of an object.
What is Momentum?Momentum is the tendency of an object to remain in motion. It is the product of the mass of the object and the velocity of the object. It is denoted by "p". Momentum is a vector quantity because it has both the magnitude and direction. The unit of Momentum is g.m/s.
The momentum can be calculated with the formula:
p = m × v
where, p = momentum of the object,
m = mass of the object,
v = velocity of the object.
The momentum is directly proportional to the mass and velocity of the object. Hence, to increase the momentum of the train by four times the mass or velocity of the train needs to be increased by four times.
The increase in the velocity of the train by four times will increase the momentum of the train.
Original Velocity of the train = 50 m/s
Increased Velocity of the train = 50 × 4 = 200 m/s
Increased new Momentum of the train = mass × new velocity
Increased Momentum = 20 metric ton × 200m/s
Increased Momentum = 4000 metric ton. m/s
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ2
Air currents escape room level 3 how to do it
Answer:
just do it. it's simple be smart friends
what is the value of acceleration due to gravity g at the pole of earth
Answer:
The value of Acceleration due to gravity at the pole of the earth is 9.870m/s^2 .Explanation:
I hope this helps you !!The diagram below shows a 5.00-kilogram block
at rest on a horizontal, frictionless table.
5.00-kg
block
Table
Which of the following is the correct name and strength of the force holding the block up?
The name and strength of the force holding the block up is 50 N upward - Normal force.
The given parameters:
Mass of the block, m = 5 kgThe weight of the block acting downwards due to gravity is calculated as follows;
W = mg
where;
g is acceleration due to gravity = 10 m/s²W = 5 x 10
W = 50 N (downwards)
Since the block is at rest, an a force equal to the weight of the block must be acting upwards. This force is known as normal reaction.
Fₙ = 50 N (upwards)
Thus, the name and strength of the force holding the block up is 50 N upward - Normal force.
Learn more about Normal force here: https://brainly.com/question/14486416
The block will remain on the table because the normal force balances with the weight of the block. The correct answer is 50 N upward normal force
From the diagram shown a 5.00-kilogram block at rest on a horizontal, frictionless table. The weight of the block will act downward which will be
Weight W = mg
let g = 10 m/[tex]s^{2}[/tex]
W = 5 x 10
W = 50 N
The block will also produce an equal but in opposite direction of a normal force which is equal to the weight of the block. That is,
Normal force N = 50 N
The block will remain on the table because the normal force balances with the weight of the block.
Therefore, the correct name and strength of the force holding the block up is 50 N upward normal force.
Learn more about stability here: https://brainly.com/question/517289
why is it so important that you take care of your nervous system?
Answer:
The nervous system handles the stress response, which, if overworked, can eventually lead to diseases ranging from high blood pressure to diabetes.
Explanation:
hope I helped
I need help. please look at the image below and let me know I need this by 7:20 am pst.
Answer:
3(1.5) = 4.5 V
Explanation:
Marks: 1
How much does a man weigh if it takes 60J of energy to climb onto a
table that is 75cm tall?
4500 N
45 N
80 N
0.8 N
Answer:
Explanation:
E = mgh
mg = E/h
mg = 60/0.75 = 80 N
Calculate the change in the kinetic energy (KE) of the bottle when the mass is increased. Use the formula
KE = one half.mv2, where m is the mass and v is the speed (velocity). Assume that the speed of the soda bottle falling from a height of
0.8 m will be 4 m/s, and use this speed for each calculation.
Record your calculations in Table A of your Student Guide.
When the mass of the bottle is 0.125 kg, the KE is
✔ 1
kg m2/s2.
When the mass of the bottle is 0.250 kg, the KE is
✔ 2
kg m2/s2.
When the mass of the bottle is 0.375 kg, the KE is
✔ 3
kg m2/s2.
When the mass of the bottle is 0.500 kg, the KE is
✔ 4
kg m2/s2.
Answer included in Question
Answer:
kinetic energy is given as KE = (0.5) m v²given that : v = speed of the bottle in each case = 4 m/s when m = 0.125 kg KE = (0.5) m v² = (0.5) (0.125) (4)²
Explanation:
Answer:
1. 0.5 2. 2 3. 3.75 4. 5
Explanation:
Which of these is Newton's 3rd law of motion?
Equal and opposite forces
F = m x a
Inertia
Gravity
Use the sentence to answer the question.
Light is affected by gravity.
Which inference can be made based on this fact?
(1 point)
Light behaves differently in space than on Earth.
Light behaves differently in space than on Earth.
Gravity causes light to refract.
Gravity causes light to refract.
Light moves faster in space than on Earth.
Light moves faster in space than on Earth.
Stronger gravity causes an increase in light.
Answer:
Light behaves differently in space than on Earth.
Explanation:
Because the gravity field is greater near earth than in most of space. Not the areas near stars, black holes, pulsars, and such but in the vast emptyness between the clumpy spots.
2 examples of non fossil fuels ?
Answer:
-> Hydropower
-> Solar power
Explanation:
-> Hydropower
[] The power of water! It is the use of falling or fast-running water to produce electricity for power. Impoundments or da*ms are mainly used in this type of power source.
-> Solar power
[] The power of the sun! It is the use of sunlight, or solar energy, to produce electricity for power. You have probably heard of solar panels, and this is the main way to collect it.
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Answer:
Wind energy and solar power
Explanation:
they do not use fossil fuels
Cody hits up food king and uses a scale to weigh the mass of an apple. if the spring potential energy in the scale is .09 j and is spring is stretched 0.6 meters, calculate the spring constant
Answer:
oK so here's what you should do is add .09 and 0.6
Explanation:
A car travels a certain distance from A to B with a speed of 60km/hr and then returns along the same path to the starting point with a speed of 40km/hr. Find the average speed and average velocity.
a) Km/hr
b) m/s
wrong answers will be reported!
Answer:
Explanation:
Speed is total distance traveled over time taken to do so.
If AB is measured in kilometers, time (t) for the whole trip is
t = AB/60 + AB/40
t = 2AB/120 + 3AB/120
t = 5AB/120 hrs
Average speed is distance over time
s = 2AB / (5AB/120)
s = 2(120)/5
s = 48 km/hr
s = 48(1000 m/km / 3600 s/hr) = 13.333333.... 13 m/s
Velocity is displacement over time.
As displacement is zero, velocity is zero
v = 0 km/hr = 0 m/s
Pretty harsh reporting answers just because they are wrong.
What happens when an unstoppable force meets an immovable object?
An object, initially traveling at a velocity of 73 m/s, experiences an acceleration of -9.8 m/s^2. How much time will it take it to come to rest?
7.4 s
Explanation:
Given:
[tex]v_0 = 73\:\text{m/s}[/tex]
[tex]v = 0[/tex]
[tex]a = -9.8\:\text{m/s}^2[/tex]
[tex]t = ?[/tex]
To solve the time it takes for the object to come to a stop, we are going to use the equation below:
[tex]v = v_0 + at \Rightarrow t = \dfrac{v - v_0}{a}[/tex]
Using the given values above, we get
[tex]t = \dfrac{0 - 73\:\text{m/s}}{-9.8\:\text{m/s}^2}[/tex]
[tex]\;\;\;\;= 7.4\:\text{s}[/tex]
The number of wavelengths that pass a fixed point on a wave is called ______?
Explanation:
it's called a wave frequency
im pretty sure but than again I'm in Middle School but just trust me
Answer:
wave frequency i think. hope its helps
Help!
A man standing in front of a plane mirror finds his image to be at a distance of 6m from himself. The distance of man from the mirror is
Answer:
The distance of man from the mirror is 3 m
Refer to the attachment
[tex]\Large\textsf{Hope \: It \: Helped}[/tex]
The distance of the man from the mirror is 3m
From the characteristics of image formed in a plane mirror,
Virtual and erectFormed behind the mirrorSame size as the objectLaterally inverted Distance of the image behind the mirror is the same as the distance of the object from the mirror.⇒ From the last point,
Let the distance of the image behind the mirror be xAlso the distance of the man from the mirror is x⇒ From the question,
x+x = 62x = 6x = 6/2x = 3 mHence, The distance of the man from the mirror is 3m
Learn more about mirror here:
Important parts of stydi g physics
Answer:
put your question in proper way' i hope you understand.
Explanation:
Explain how the linear rate spring operates?
A 0.50-kg block attached to an ideal spring with a spring constant of 80 N/m oscillates on a horizontal frictionless surface. The total mechanical energy is 25 J. The maximum speed of the block is:
Answer:
Explanation:
easy way
when system is all kinetic energy, velocity is at a maximum
E = ½mv²
v = √(2E/m) = √(2(25)/0.5) = √100 = 10 m/s
harder way
ω = √(k/m) = √(80/0.5) = √160 rad/s
When the system is entirely spring potential, the amplitude A is
E = ½kA²
A = √(2E/k) = √(2(25)/80) = 0.790569... = 0.79 m
maximum velocity is ωΑ = 0.79√160 = 10 m/s