Answer:
The mechanical energy of the system increases, provided there is no loss of energy due to friction. The energy would transform to kinetic energy when the speed is increasing. The mechanical energy of the system remains constant provided there is no loss of energy due to friction.
Explanation:
what is the main function of this organelle in the cell?
Answer:
[tex]to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
Explanation:
[tex]the \: main \: function \: of \: this \: organelle \\ \: in \: the \: cell \: is \: to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
What’s this called please help
Answer:
the answer is a linear
Explanation:
heres a graph different ones at this link
An unknown substance has a volume of 2 cm3 and a mass of 38.6 grams.
What is the density of the sample?
Answer:
The answer is 19.3 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{38.6}{2} \\ [/tex]
We have the final answer as
19.3 g/cm³Hope this helps you
HELP ASAPP JUST TELL ME WHAT TO PUT IN THE MISSING SPACES words(cell,microorganisms,micrometer,microscopic,molecule)
Answer:
microorganisms, molecule, microscopic, cell, micrometer
Explanation:
If you find my answer helpful
Pls consider marking it as Brainliest! It would mean a lot!
Calculate the enthalpy change to raise the temperature of 180.0 g of water from 10.0°C to 40.0°C. The molar heat capacity for water is 75.3 J/Kmol. a. What values have you been given? b. What value are you trying to find? c. Which heat equation do you need? d. Now solve the problem.
Answer:
22572J
Explanation:
a) The following values have been given:
Mass of water = 180.0g
Initial temperature = 10°C
Final temperature = 40°C
molar heat capacity for water = 75.3J/Kmol
To calculate the specific heat capacity of water (c), we divide the molar heat capacity by molar mass of water (18g/mol)
That is; 75.3/18
= 4.183 Jg/K
b) The enthalpy change denoted by ∆H is the value we are trying to find.
c) To find enthalpy change (∆H), we use the formula:
∆H = m × c × ∆T
Where; m= mass
c= specific heat capacity
∆T= change in temperature =
(final temp - initial temp)
∆H = m × c × ∆T
∆H = 180 × 4.18 × (40-10)
∆H = 180 × 4.18 × 30
∆H = 22572J
Use the rules of significant figures to report the answer to this math question: (5.003 x 10^4) - (6.059 x 10^3) + (9.23 x 10^2) =
Answer:
44894
Explanation:
what turns colour in an acid and base
Answer:
Chemists use a solution called Universal Indicator to identify acids and bases. ... The Universal Indicator Color Guide shows that Universal Indicator turns red when it is added to a strong acid, it turns purple when it is added to a strong base, and it turns a yellowish-green when it is added to a neutral solution.
Explanation:
Answer:
Phenolphthalein
Explanation:
an atomic mass unit is defined exactly as
Answer:Atomic mass is the mass of an atom in atomic mass units (amu)
Atomic mass
• atomic mass (sometimes called atomic weight) is the mass of the atom in atomic mass units (amu). (from periodic table)
o One atomic mass unit is defined as a mass exactly equal to one-twelfth the mass of one carbon-12 atom. Carbon-12 is the carbon isotope that has six protons and six neutrons. Setting the atomic mass of carbon-12 at 12 amu provides the standard for measuring the atomic mass of the other elements.
o For example, experiments have shown that, on average, a hydrogen atom
Which scenario is an example of primary succession?
A.
the formation of soil after a volcano
B.
the growth of weeds after a flood
C.
the establishment of a forest in an abandoned crop field
D.
the recovery of grassland after a fire
Answer:
the answer to your question is A
How do I put Chlorofluorocarbons in a sentence?
Answer: Here are some examples
Explanation:
1. In the southern spring, ozone is destroyed above Antarctica, mainly by manufactured compounds called chlorofluorocarbons (CFCs )
2. It is now generally accepted that the loss of stratospheric ozone is caused by chemical reactions initiated by chlorofluorocarbons.
3. Your refrigerator and other home appliances emit Chlorofluorocarbons, or CFCs, as do aerosol spray cans.
Hope this hlps!
Explanation:
To be able to put the chemical term chlorofluorocarbons in a sentence, you must first understand what the chemical species denotes.
We know chlorofluorocarbons are a group of compounds that consists of atoms of chlorine, flourine, and carbon.
Now, here are some sample sentences;
Chlorofluorocarbons are one of the leading causes of ozone depletion in the atmosphere. Most national governments are putting measures in place to check the use of chlorofluorocarbons in industrial manufacturing.If we can innovate a substitute for chlorofluorocarbons, the environment would be safer.What is Mercury's proximity to the sun
Answer:
46.943 million km
Explanation:
From an average distance of 36 million miles (58 million kilometers), Mercury is 0.4 astronomical units away from the Sun.
Answer:
29.169 million miles
Explanation:
From an average distance of 36 million miles(58 million kilometers,Mercury is 0.4 astronomical units away from the sun.
The first column of the periodic table is called the
Molecules in a liquid are:
closer together than in a gas
moving more quickly than in a solid
moving more slowly than in a gas
all of the above
Please help!!!
Answer:
all of the above
Explanation:
(True/False) Solid Potassium Chloride, KCl (s), consists of equal numbers of positive Potassium ions (K+), and negative Chloride ions (Cl-) arranged in three dimensional networks called crystals. (6 Pts)
Answer:
true
Explanation:
Count the total number of atoms in CH4:
Answer:
5 atoms
Explanation:
there is 1 carbon atom and 4 hydrogen atoms
Find an element that has the same
number of valence electrons as
Thallium (T1).
i need the answer nowww
Answer:sodium
Explanation: because its not hard to look on the PERIODIC TABLE
1. A pile of boxes exerts a force of 500 newtons downward on the floor. The boxes are not in motion. What is the normal force on these boxes?
2. Norman drags a stubborn dog by his leash with a force of 200 newtons. The dog is slowly moving towards Norman. What do you know about the force exerted by the dog?
3. A baby grand piano sits in a music room. The piano exerts a force of 3500 newtons downward. Isaac tells his friends that he is strong enough to lift the piano off the floor. How much force will he have to use to lift the piano?
4. Ms. Holt is dragging a box of assessments across the floor using a force of 70 newtons. The frictional force acting against the box is 50 newtons. What is the net force on the box?
5. A bicycle is sitting motionless in the driveway. What is the net force acting on this bike?
6. Maria drops a box that exerts of force of 300 newtons downward on a table. The normal force acting on the box from the table is 250 newtons. What will happen to the table and the box? What is the net force of the box?
7. Anna is riding her bike, moving at a constant velocity of 3 miles per hour to the south. She is using 200 N of force to pedal her bike. A gust of wind blowing in the same direction she is traveling suddenly exerts a force of 20 Newtons on her. What will happen to her motion? (hint: Use the term accelerate OR decelerate in your answer.)
8. Mrs. Fedde is riding her bike, moving at a constant velocity of 5 miles per hour to the north. She is using 300 N of force to pedal her bike. A gust of wind blowing in the opposite direction she is traveling suddenly exerts a force of 50 Newtons on her. What will happen to her motion? (hint: Use the term accelerate OR decelerate in your answer.)
Which of the following is NOT an example of a chemical change? *
O Corrosion
O Grinding
O Combustion
O Rust
How to find the number of atoms?
To find the number of atoms, we multiple the number of mols by Avogadro's number, about 6.02x10^23
Mark Brainliest!
Answer:
to calculate the numbers of atoms in a sample, divide it's weight in grams by the amu atomic mass from the periodic table, then multiply the result by avogadro's number: 6.0 × 10^24
helppppppppppppp plzzzzzzzz Identify each structure based on its label.
Compound A is a
amine.
Compound B is a
amine.
Compound C is a
amine.
Compound D is
.
Answer:
kldja
Explanation:
A.) primary
B.) tertiary
C.) secondary
D.) ammonia
edge2020
10 POINTS
Which tool can be used to measure the volume of a liquid to one decimal place?
Options:
a beaker
a graduated cylinder
an Erlenmeyer flask
a test tube
which element has the electron configuration of 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p6 7s2 5f14 6d8
Answer:
Darmstadtium
Explanation:
An element with the electronic configuration 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s²4f¹⁴5d¹⁰6p⁶7s²5f¹⁴6d⁸ has 110 electrons in its electron shells.
Since the element is a neutral atom, this number is also equal to its atomic number. Therefore, its atomic number is 110.
The element in the period table that has an atomic number of 110 is Darmstadtium, a d-block element, thus a transittion metal. It also belong to period 7 in the Periodic table of elements.
The element that has the electron configuration is Darmstadtium.
Electronic configuration:Since An element with the electronic configuration 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s²4f¹⁴5d¹⁰6p⁶7s²5f¹⁴6d⁸ contains 110 electrons in its electron shells.
Also, the element should be a neutral atom, this number should also equal to its atomic number. Therefore, its atomic number is 110.
The element in the periodic table that has an atomic number of 110 is Darmstadtium, a d-block element, thus a transition metal.
Learn more about electron here: https://brainly.com/question/24850343
What kinds of reactions are studied in electrochemistry?
A. Oxidation-reduction reactions
B. Precipitation reactions
C. Decomposition reactions
D. Double-replacement reactions
(Answer is A)
Answer:A
Explanation: A P E X
25 POINTS
Boyd takes additional measurements of the mass of product formed in a reaction. He uses a balance that has smaller graduations than the first balance he used.
What is Boyd most likely trying to change?
Options:
He is trying to increase his accuracy but not his precision.
He is trying to increase his precision but not his accuracy.
He is trying to decrease his precision and increase his accuracy.
He is trying to increase his precision and decrease his accuracy.
Answer:
The correct option is A: "He is trying to increase his accuracy but not his precision"
Explanation:
Accuracy of measurement is when the value of the measurement is close to the actual value of that measurement while precision is when the experiment is repeated using the same instrument but obtaining different values.
When Boyd changed the weighing balance in his experiment to a smaller one, the smaller weighing balance has better accuracy (smaller graduations) than the initially used one because the smaller weighing balance will provide a value close to the actual value of the mass of the product. If he had, however, repeated the experiment without changing the weighing balance, he would have sought to increase his precision.
From the description above, it can be said that Boyd was trying to increase his accuracy but not his precision
Answer:
The correct option is A: "He is trying to increase his accuracy but not his precision"
Explanation:
right on EDGE 2021
Which of the following is an example of quantitative data?
A.five eggs in each nest
B.oval-shaped eggs
C.small eggs
D.blue eggs with white specks
when do meanders form in a river?
A.young
B.old
C.mature
D.rejuvenated
Answer:
The formation of a meander. As the river erodes laterally, to the right side then the left side, it forms large bends, and then horseshoe-like loops called meanders . The formation of meanders is due to both deposition and erosion and meanders gradually migrate downstream.
Which is the IUPAC name for NO?
nitric oxide
binitrogen oxide
dinitrogen dioxide
nitrogen monoxide
The IUPAC name for NO is nitric oxide. The correct option is A.
What is IUPAC naming?The International Union of Pure and Applied Chemistry (IUPAC) is a global organization that represents chemistry as well as related sciences and technologies.
The chemical compound's identity is represented by its common and IUPAC names, which differ from one another. Every chemical compound has multiple names.
Complete the following step-by-step response: The IUPAC nomenclature is a standardized name given to organic compounds in accordance with official naming rules.
Nitric oxide, also known as NO, is a colorless gas. It is one of the most important nitrogen oxides.
Nitric oxide is a free radical, which means it has an unpaired electron, which is sometimes represented in its chemical formula by a dot.
Thus, the correct option is A.
For more details regarding IUPAC, visit:
https://brainly.com/question/16631447
#SPJ6
Answer:
D: Nitrogen Monoxide
Explanation:
There's one Nitrogen atom and one Oxygen atom
How would you arrange the objects below from greatest to least volume?
A balloon
A water bottle
A bottle of soda
A rock
Answer:
A balloon
A bottle of soda
A rock
A water bottle
Explanation:
the ability for a substance to rust is
a. oxidation
b.rustability
c.magnetic attraction
d.reactivity
Answer:
i think it is letter b. rustability but not so sureeee
3. In an exercise to teach students how to use and analytical balance, the instructor
gives a student a quarter which has been pre-weighed as 5.6026 g. The weight that the
student obtains for the same quarter is 5.6013 g. What is the percent error in the
students reading?
Answer:
The percent error is 0.023%.
Explanation:
Pre-weighed of a quarter is 5.6026 g.
The weight that the student obtains for the same quarter is 5.6013 g.
We need to find the percent error in the students reading. It is given by the formula as follows :
[tex]\%=\dfrac{|\text{original value-calculated value}|}{\text{original value}}\times 100[/tex]
Putting all the values, we get :
[tex]\%=\dfrac{5.6026 -5.6013 }{5.6026 }\times 100\\\\\%=0.023\%[/tex]
So, the percent error is 0.023%.