explain what it means for an electron to be both a particle and a wave. what two scientists contributed to this quantum model of the atom?

The balloon's new volume is 24.6L. An arctic weather balloon being inflated using 24.6 litres of helium gas in a prep shed. The shed is seven degrees Celsius inside.

When the balloon is hauled outside, it is seven degrees Celsius outside. Any three-dimensional solid's volume is equal to how much room it occupies. One of these solids can be a cube, a cuboid, a cone, a cylinder, or a sphere. Chemical compounds are composed of a large number of comparable molecules (or molecular entities), which are composed of atoms from various elements bonded together by chemical bonds. Because of this, a molecule composed of atoms from a single element is not a compound.

v1/t1 = v2/t2

24.6/7 = v2/7

v2 = 24.6L

v1 = v2

Learn more about helium gas here

https://brainly.com/question/26408362

#SPJ4

H and O are in the +1 and -2 oxidation states in H2O H 2 O throughout the aforementioned reaction. In the reactant and product sides of the reaction, oxygen and hydrogen are therefore in the same oxidation state. So, the reaction that is being described is not a redox reaction.

To learn more about redox reaction refer to:

https://brainly.com/question/21851295

#SPJ1

The net ionic equation for the reaction is:

H+(aq) + CO3^2-(aq) → NO3^-(aq) + H2O(l) + CO2(g)

The given reaction is acid-base neutralization, where HNO3 (nitric acid) acts as the acid, and KHCO3 (potassium hydrogen carbonate) acts as the base. The H+ ion from HNO3 reacts with the CO3^2- ion from KHCO3 to form H2O (water) and CO2 (carbon dioxide) as products. The remaining ions combine to form KNO3 (potassium nitrate) as the main product.

KHCO3 is Potassium bicarbonate. It is a white, crystalline, slightly alkaline and salty substance. It is created by the passage of carbon dioxide through an aqueous potassium carbonate solution. It is used in medicine as an antacid.

To know more about carbon dioxide, visit here:

https://brainly.com/question/15063989

#SPJ4

D) sodium chloride (NaCl) and hexane (c6h14) are most likely to form a solution when mixed.

Sodium chloride (NaCl) and hexane (C6H14) are two common substances that can form a solution when mixed. When these two substances are combined, the sodium chloride molecules interact with the hexane molecules and form a homogenous mixture.

This mixture allows for the two components to be evenly distributed throughout, creating a solution. The combination of sodium chloride and hexane is able to form a solution due to the polar nature of sodium chloride and the non-polar nature of hexane.

The polar nature of sodium chloride allows it to form strong hydrogen bonds with the non-polar hexane molecules, resulting in a homogenous mixture.

To learn more about sodium chloride, click here:

https://brainly.com/question/9811771

#SPJ4

A hydrated sample of sodium acetate is found to have a molar mass of 263. 183g. water molecules are associated with each sodium acetate 1000mL/L of sodium acetate make up the bulk.

sodium volume in mL, molar mass, and molarity = \s1000 \s500 \s​ \s ×0.375×82.0245=15.38. g.The number of moles per litre is the molarity of a solution. In 500 ml, you have 0.75 moles. As a result, you have 0.75 moles per liter, or 1.5 moles per liter, or one pound. A hydrated sample of sodium acetate is found to have a molar mass of 263. 183g. water molecules are associated with each sodium acetate 1000mL/L of sodium acetate make up the bulk.The mass percentage of water in a 20% solution with 100g of water is equal to 100 - 20%, or 80%. <br> 100 grams of the solution, or 80%, 100% of the answer is equal to "(100)/(80)" gram. 20% of the answer is equal to (100/(80) xx 20) = 25 grams. Therefore, 25 grams of sodium sulphate are required to make a 20% (w/w) solution in 100 g of water.

learn more about  sodium here:

https://brainly.com/question/29327783

#SPJ4

At this location, a solution is made up of dimethylamine, a weak base, and dimethylammonium bromide. The solution's pH value is 10.96.

a material that can neutralize acids and receive hydrogen ions from water. Bases can color certain colours blue and feel sloppy or soapy upon that skin. Sodium hydroxide is a good illustration of a base.

Because it totally dissociates into sodium ions as well as hydroxide ions, hydrogen peroxide is the strongest base. Further away from the acid, these strong acids are treated with hydronium ions, totally ionizing the hydrogen ions.

pOH = pKb + log [acid]/[base]

pOH = -log 1.3 × 10⁻³ + log 0.20 M/0.14 M

pOH = 3.04

pH of the solution,

pH + pOH = 14

pH = 14 - pOH

= 14 -3.04

= 10.96

To know more about base visit:

https://brainly.com/question/27089588

#SPJ4

When the small molecules are linked together to form the larger molecules, the increase in the entropy typically comes from : heat.

The entropy can be defined as the measure of the randomness or the disorder of the particular system. Some properties of the entropy is given as :

1) The SI unit of the entropy is J/Kmol

2) The entropy is the thermodynamic function.

3) The entropy is the state function.

4) The entropy is depends on the state system and not on the path.

Thus, the increase in the entropy comes in the form of heat when  the small molecules are linked together to form the larger molecules.

To learn more about entropy here

https://brainly.com/question/14483037

#SPJ4

Robert Boyle created Boyle's Law, the first law to describe the inverse relationship between the pressure and volume of a gas at constant temperature.

Boyle's Law states that the pressure and volume of a gas are inversely proportional at a constant temperature. This means that as the volume of a gas increases, the pressure decreases and vice versa. Boyle's law is usually represented mathematically as PV=k, where P is the pressure of the gas, V is its volume, and k is a constant. Boyle's law was one of the first laws describing the behavior of gases and laid the foundation for the study of thermodynamics. It was a significant contribution to the field of chemistry and physics, and it is still widely used today in various applications such as in the design of gas storage tanks, scuba diving and many other fields.

To know more about Boyle's law click below:

https://brainly.com/question/1437490#

#SPJ4

The simplification of the expression will return 3. Option 1.

The expression to be simplified is as follows:

3 mol/1 x 1/1 mol

This is the same as: 3 mol x 1/1 x 1 mol

Carrying out the mathematical expressions of the numerator and denominator, we will have:

 3 mol/1 mol

Carrying out the division, the 'mol' will cancel out while 3/1 will give us 3.

In other words, 3 mol/1 x 1/1 mol will return a value of 3.

More on algebraic expressions can be found here: https://brainly.com/question/953809

#SPJ1

The Gibbs free energy of reaction is the difference in Gibbs energy of formation of the products and that of the reactants. The ΔGrxn for the given reaction is  -2453 kJ.

The Gibbs free- energy is the available energy form for a system. The Gibbs free energy change of a reaction is given as follows:

ΔGrxn = ∑ΔGf (products) - ∑ΔGf (reactants)

The Gibbs energy of formation of all the reactants and products are given in the data. Hence, multiply each value with corresponding number of moles and the Gibbs energy of the reaction is given as:

ΔGrxn = (4 ×-394.4 kJ/mol) + (2×-288.57 kj/mol) - (2 × 209.2 kJ/mol)

           =  - 2453 kJ.

Therefore, the ΔGrxn of the given reaction is -2453 kJ.

Find more on Gibbs energy change:

https://brainly.com/question/15213613

#SPJ1

The moles of vanillin are required to produce one mole of iodovanillin is one mole of vanillin.

According to the question the reaction is expressed as :

C₈H₈O₃   +  NaI  +  NaOCl   ---->  C₈H₇IO₃

The vanillin react with sodium iodide and the sodium hypochlorite froms the idovanillin.

The number of moles can be calculated by the formula given below :

The number of moles = mass / molar mass

It is clear from the above balanced equation that :

1 mole of the vanillin required to produce ethe 1 mole of the idovanillin

Thus, the number of moles of the vanillin is one mole to produce the 1 mole of the idovanillin.

To learn more about vanillin here

https://brainly.com/question/27095982

#SPJ4

One kilogram of water requires one kilocalorie of heat energy to increase its temperature by one degree F.

Your body temperature is usually around 37 °C. You frequently get a fever when your body is 37.8°C or higher. You can feel unsteady, sweaty, or chilly. You can tell whether you have a fever by taking your temperature using a thermometer.

Is India hotter than Australia? India is anticipated to be hotter since it is closer to the equator than Australia. Most of India's interior regions see average temps between 90 and 104 °F. In contrast, Australia's summertime average temperature is 86 °F.

To know more about temperature visit:

https://brainly.com/question/13294753

#SPJ4

The slight overlap of the Van der Waals surfaces between the catalytic triad residues is important for the structural relationships of the residues, allowing for proper positioning and orientation. It also helps to stabilize the transition state of the enzyme-catalyzed reaction which is crucial for the catalytic activity of the enzyme

The slight overlap of the Van der Waals surfaces is also known as the Van der Waals interaction. It is important for the structural relationships of the catalytic triad residues in enzymes.

Enzymes are biological catalysts that speed up chemical reactions in cells. A common feature of enzymes is the presence of a catalytic triad, which is a group of three amino acid residues that are critical for the enzyme's catalytic activity. The catalytic triad residues are typically composed of a nucleophile, a base, and an acid/proton acceptor.

Learn more about Van der Waal's Interaction here: https://brainly.com/question/5541979

#SPJ4

Sodium (Na) and chlorine (Cl) are two highly reactive elements that, when chemically bonded, form the compound sodium chloride (NaCl), more commonly known as table salt.

What is surprising about the properties of these elements when they chemically bond to form this compound is that the resulting compound is a very stable and highly crystalline solid that is not reactive or explosive like the individual elements.

Sodium, when exposed to air or moisture, reacts vigorously and can ignite or explode. Chlorine, being a halogen, is a highly reactive gas and can be toxic to living organisms. However, when they bond together, they form a stable compound that is safe to handle and consume.

Therefore, Another surprising property of this compound is that it is an ionic compound, meaning it is composed of ions with a positive charge (Na+) and negative charge (Cl-). This type of chemical bond is formed by the transfer of electrons from one atom to another, which makes it an ionic bond, different from covalent bond that is formed by the sharing of electrons.

Learn more about sodium from

https://brainly.com/question/24878544

#SPJ1

The percent by mass of the solution of H2O2 is 1.6547%, when hydrogen peroxide decomposes into water and oxygen.

How to calculate percent by mass of the solution?

To find the percent by mass of a solution of hydrogen peroxide (H2O2) prepared from 1.423 g of H2O2 that is titrated with 40.22 mL of 0.01143 M KMnO4(aq), you will need to determine the mass of H2O2 that is actually present in the solution.

The balanced equation for the reaction is:

2KMnO4(aq) + 3H2O2(aq) + 8H+(aq) --> 2MnO2(s) + 5O2(g) + 8H2O(l)

From the equation, we know that for every 2 moles of KMnO4(aq), 3 moles of H2O2(aq) are consumed. Therefore, the number of moles of H2O2 that are actually present in the solution can be determined by multiplying the moles of KMnO4 consumed by 3/2.

The moles of KMnO4 consumed can be determined by multiplying the volume of KMnO4 used by its concentration in mol/L.

So the moles of KMnO4 = 40.22 mL x 0.01143 mol/L = 0.459 mol

The moles of H2O2 present = (3/2) x 0.459 mol = 0.6885 mol

The mass of H2O2 present = 0.6885 mol x 34.02 g/mol = 23.55 g

Therefore, the percent by mass of the solution of H2O2 is (23.55 g / 1.423 g) x 100 = 1.6547 %

To learn more about hydrogen peroxide, visit: https://brainly.com/question/25566753

#SPJ1

Answer:

To find out how long it took for the round to travel 2,000 m, we can use the formula:

time = distance / speed

In this case, the distance is 2,000 m and the speed is 500 m/s. So we can plug in these values:

time = 2000 m / 500 m/s

time = 4 seconds

So the round took 4 seconds to travel 2,000m.

The amount of heat absorbed to raise the temperature of 24.0 grams of aluminum from 300K to 350K is 1080J.

The amount of heat absorbed or released by a substance can be calculated as follows:

Q = mc∆T

Where;

According to this question, a solid aluminum has a specific heat capacity of 0.90J/g K. The amount of heat absorbed or released by the substance is calculated as follows:

Q = 24.0 × 0.90 × {350 - 300}

Q = 24.0 × 0.90 × 50

Q = 1,080 Joules

Therefore, 1080J is the amount of heat absorbed by the aluminium sample.

Learn more about heat at: https://brainly.com/question/9588553

#SPJ1

Nature of reactants, Concentration of reactants, Catalyst, Temperature, Exposure of light.

1) Reactant nature: The reaction rate is influenced by the reactants' physical characteristics, size, and chemical make-up.

2) Reactant concentration: As the reactant concentration rises, there are more collisions and more opportunities for effective collisions, which raises the rate.

3) Reaction rates may be accelerated by a positive catalyst or slowed down by a negative catalyst.

4) The pace of reaction is quadrupled or doubled when the temperature rises due to an increase in the number of effective collisions.

5) The rate of a photochemical reaction is dependent on the amount of light that is shining on the reacting mixture.

Learn more about concentration here:

https://brainly.com/question/25639730

#SPJ4

the reaction's 2N2O5→2N2O4+O2  frequency factor at 303 K is A = 9.15 x 10^-4 s^-1 *

The specific rate constant (k) of a first-order reaction is given by the equation:

k = A*e^(-Ea/RT)

Where A is the frequency factor, Ea is the activation energy, R is the gas constant and T is the temperature in Kelvin.

Substituting for A:

A = k*e^(Ea/RT)

We know that the specific rate constant at 303 K is 9.15 x 10^-4 s^-1, and we can assume that the activation energy (Ea) and gas constant (R) are constant.

T = 303 K

Plugging in the known values we get

A = 9.15 x 10^-4 s^-1 * e^(Ea/R*303)

The frequency factor, A, is a measure of the number of collisions of reactant molecules per unit of time that have sufficient energy to overcome the activation energy barrier and form products. The value of A can be used to compare the relative rates of different reactions. The fact that the specific rate constant at 293 K is 2.35 x 10^-4 s^-1 and at 303 K is 9.15 x 10^-4 s^-1, indicates that the reaction rate increases with increasing temperature. This is consistent with the expected behavior of a first-order reaction, as an increase in temperature will increase the kinetic energy of the reactant molecules, making them more likely to collide with each other and form products.

Learn more about  specific rate constant here:

https://brainly.com/question/16012644

#SPJ4

Search for the complete question is :

In solvents like CCl4, the reaction 2N2O52N2O4+O2 occurs at or near room temperature. At 293 K, the particular rate constant is discovered to be 2.35 104 s1, while at 303 K, it is discovered to be 9.15 104 s1. Determine the reaction's frequency factor at 303 K.

The flask will have the greatest number of collisions per second with the walls of the container is Flask A: CO at 760 torr and 0 °C.

The Collision of the molecules with the wall of the container will be  depend on the pressure. Therefore, the flask with the highest pressure have the greatest no of the collisions. As flask A has the highest pressure of 760 torr, Therefore, the flask A has the greatest number of the collusions per second with the walls of the container.

Thus the flask A with CO gas will have the greatest number of collisions per second with the walls of the container.

This question is incomplete, the complete question is :

Consider three identical flasks filled with different gases.

Flask A: CO at 760 torr and 0 °C

Flask B: N₂ at 250 torr and 0 °C

Flask C: H₂ at 100 torr and 0 °C

which flask will have the greatest number of collisions per second with the walls of the container?

To learn more about gas here

https://brainly.com/question/23056914

#SPJ4

Answer: 1

Explanation:

The student is correct because organisms are more likely to be preserved in sedimentary rock than in igneous rock.

Sedimentary rocks are formed by the accumulation or deposition of mineral or organic particles at the Earth's surface, followed by cementation. Sedimentation refers to the processes that cause these particles to settle in place. Sedimentary rocks form from previously existing rocks or fragments of once-living organisms. They form as a result of deposits accumulating on the Earth's surface. Layering or bedding in sedimentary rocks is common. Sedimentary rocks are formed by sediment accumulation. Sedimentary rocks are classified into three types. Clastic sedimentary rocks form as a result of mechanical weathering debris accumulation and lithification. Breccia, conglomerate, sandstone, siltstone, and shale are some examples.

Here,

Because organisms are more likely to be preserved in sedimentary rock than in igneous rock, the student is correct.

To know more about sedimentary rock,

https://brainly.com/question/10709497

#SPJ1

Structural diversity of carbon-based molecules is determined by following properties:1.  ability of those bonds to rotate freely,2. ability of carbon atom to form four covalent bonds,3. orientation of those bonds in the form of  tetrahedron.

Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.

Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.

Learn more about covalent bond,here:

https://brainly.com/question/19382448

#SPJ1

In the case of magnesium, calcium, aluminum, and potassium, potassium is the most reactive metal.

In general, reactivity of a metal increases as you move down a group or a column in the periodic table. The reactivity of a metal is related to the ease with which it loses electrons to form a positive ion, or cation. In the case of magnesium, calcium, aluminum, and potassium, potassium is the most reactive metal. It is located in the first group or column of the periodic table, and has the smallest atomic radius and the most loosely held outermost electrons. This makes it easier for potassium to lose electrons and form a positive ion, making it the most reactive of the four metals mentioned. Aluminum is the next most reactive, followed by calcium and magnesium. Magnesium is the least reactive of the four metals mentioned.

To know more about magnesium please refer: https://brainly.com/question/1533548

#SPJ4

The new temperature be when 150.0 mL of oxygen is 68.6oC collected over water at 19.0oC and 100.0kPa and dry volume becomes 100.0 mL and the pressure of the dry gas becomes 105.0kPa

Given temperature of oxygen (T1) = 19.0oC = 273 + 19 = 292K

The volume of oxygen collected (V1) = 150mL

The pressure of oxygen (P1) = 100kPa

The pressure of dry gas becomes (P2) = 105kPa

The volume of dry gas becomes (V2) = 100mL

The new temperature is = T2

From Gas Laws we know that PV = nRT such that

P1V1/T1 = P2V2/T2

Then T2 = P2V2T1/P1V1

T2 = 105 x 100 x 292 / 100 x 150 = 204.4K = 68.6oC

Such that the new temperature obtained is 68.6oC

To learn more about oxygen click here https://brainly.com/question/13370320

#SPJ4

Pollution refers the release of hazardous pollutants into the environment. These hazardous elements are referred to as contaminants. Pollutants may be naturally occurring, such as volcanic ash.

They may also be caused by human activities, such as factory runoff or waste. Pollutants have a negative impact on the quality of the air, water, as well as land.

Pollution refers the release of hazardous pollutants into the environment. These hazardous elements are referred to as contaminants. Pollutants may be naturally occurring, such as volcanic ash. They may also be caused by human activities, such as factory runoff or waste. Pollutants have a negative impact on the quality of both the air, water, as well as land.

To know more about Pollution

https://brainly.com/question/28519286

#SPJ4

Igneous rocks are regarded as intrusive, despite the fact that they were essentially created from magma under the earth's surface.

Due to the diverse chemical composition, size, and structural characteristics of the rocks, igneous rock crystals are created.

Because igneous rock crystals are generated due to various chemical compositions, sizes, and structures, they are used to classify the rock itself. When lava cools and solidifies, igneous rocks are the type of rocks that are created.

Grain size, silica concentration, and silica saturation are used to categorize them. The pace of cooling determines the kind of igneous rock, with slow cooling leading to the construction of large crystals and rapid cooling to the production of microscopic crystals. The chemical makeup of the igneous rocks determines how they are categorized.

To learn more about igneous rocks refer to:

https://brainly.com/question/18297174

#SPJ1

The radius of the strontium atom is 215 pm. The strontium atoms would have to be distance of 3.46 mm is 8.0 × 10⁶ atoms.

The information is given as :

The radius, r = 215 pm = 2.15 × 10⁻¹⁰ m

The distance, d = 3.46 mm = 3.46 ×10⁻³ m

The No. of strontium atoms that  laid side by side is :

n = d / 2 r

n = 3.46 ×10⁻³ m  / (2 × 2.15 × 10⁻¹⁰)

n =  3.46 ×10⁻³ / 4.3  × 10⁻¹⁰  atoms

n = 8.0 × 10⁶ atoms

The number of strontium atoms is 8.0 × 10⁶ atoms.

To learn more about atoms here

https://brainly.com/question/11966999

#SPJ4

The Highly Soluble : NaCl, KOH, CH₃CH₂OH, CH₃COOH, CH₃OH, Na₂SO₄, KNO₃

The Insoluble: C₆H₆, C₆H₁₄, CCl₄, CHCl₃, CH₂Cl₂, CH₃(CH₂)₅OH

1) NaCl : NaCl is a chloride and NaCl is highly soluble.

2)  CH₃C l: This compound is an organic. The electronegativity between C and Cl is high, and is polar. Because water is also polar, it is highly soluble.

3) CH₃OH:  Alcohols are hydrocarbon are is highly soluble in water because of hydrogen bonding.

4) KOH: KOH is highly soluble. This is a strong an readily dissociates in water.

5)  C₆H₆ : It is the benzene ring and is a nonpolar molecule, so it is expect this is insoluble with water.

6) C₆H₁₄ : It is hexane of  long chain of hydrocarbons. There is no hydrogen bonding, this is nonpolar and insoluble in water.

7) KNO₃: It is highly soluble because all nitrates are soluble in the water.

8)  CCl₄ : There is balance of the partial charges which makes it a nonpolar. It  is insoluble in water.

9) Na₂SO₄: It is highly soluble.

10) CH₃CH₂OH: It is highly soluble in water.

11) CH₂Cl₂ : This is polar and due this it is highly soluble in water.

12) CH₃COOH : It is a carboxylic acid. It is highly soluble in water.

To learn more about soluble here

https://brainly.com/question/2484768

#SPJ4