determine the total amount of heat, in joules, required to completely vaporize a 50.0 gram sample of H20 at its boiling point at standard pressure

Answer:

its natural gas because i had something like this

Explanation:

The renewable energy sources, such as biomass, geothermal resources, water, wind, etc. are called the natural resources. These can be converted into clean and usable energy. The correct option is D.

The energy which is derived from the natural sources which are replenished at a higher rate than they are consumed is defined as the Renewable energy. The renewable energy generating produce lower emissions than burning the fossil fuels.

The word biomass refers to the organic plant matter which is converted into fuel and used as an energy source. The biomass fuel is considered as an important renewable and sustainable source of energy. It is used for the production of electricity.

The organic materials like wood, agricultural wastes, etc. acts as the excellent sources to produce biomass fuel. It is possible to burn the biomass fuel directly and later converted into methane and ethanol biofuels.

Thus the correct option is D.

To know more about renewable energy, visit;

https://brainly.com/question/13258101

#SPJ7

Answer:

6.02 × 10²³ atoms Cl₂

Explanation:

Avagadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.

Step 1: Define

1.00 mol Cl₂ (g)

Step 2: Use Dimensional Analysis

[tex]1.00 \hspace{3} mol \hspace{3} Cl_2(\frac{6.02(10)^23 \hspace{3} atoms \hspace{3} Cl_2}{1 \hspace{3} mol \hspace{3} Cl_2} )[/tex] = 6.02 × 10²³ atoms Cl₂

Answer:

6 protons 8 neutrons 5 electrons

Explanation:

protons are blue neutrons are red electrons are green

Answer:

SBr2: Electron geometry-tetrahedral; molecular geometry-trigonal pyramidal

PI4+: Electron geometry-tetrahedral; molecular geometry-tetrahedral

IBr2−: Electron geometry- Trigonal bipyramidal ; molecular geometry- linear

Explanation:

In SBr2, the molecule is of the structure type AX2E2 hence it is based on a tetrahedron but have two lone pairs of electrons hence the molecular geometry is trigonal pyramidal.

PI4+ has four electron domains and all of them are bond pairs hence both electron geometry and molecular geometry are both tetrahedral.

IBr2- is of the structure type AX2E3 hence it is based on a trigonal bipyramd and has a linear molecular geometry.

2)

SiF4 has a tetrahedral molecular and electron domain geometry because the central atom(Si) has no lone pairs.

SeF4 has a trigonal bipyramidal electron geometry with the structure AX4E. Its molecular geometry is See-saw since it has one lone pair of electrons that causes a deviation from its ideal trigonal bypyramidal geometry.

XeF4 has  an octahedral electron domain geometry and the molecule is AX4E2. The two lone pairs are positioned above and below the plane of a square hence the molecule is square planar.

Answer:Two Main Types of Pure Substances

Elements and compounds are the two types of pure substances. Examples of common elements include carbon, nitrogen and hydrogen. They consist of one type of atom and cannot break down into something else. Every pure carbon substance, for example, has the same particles in it.

Explanation:I think

Answer: The particles are moving fast but close together.

Answer:

its in the explanation.

Explanation:

1.In liquids, particles are quite close together and move with random motion throughout the container. Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.

2.It assumes the shape of the part of the container which it occupies particles can move/slide past one another.

Hope this helps. :)

Answer:

Organisms and humans depend on each other to get by. Environmental science is important because it enables you to understand how these relationships work.

For example, humans breathe out carbon dioxide, which plants need for photosynthesis. Plants, on the other hand, produce and release oxygen to the atmosphere, which humans need for respiration.

Animal droppings are sources of nutrients for plants and other microorganisms. Plants are sources of food for humans and animals. In short, organisms and humans depend on each other for survival.

Explanation:

Explanation:

Phosphorus (P) because of the 5 valence electrons total, 3 of them are in the 3p sublevel, and according to Hund's rule, they "single-fill" each orbital first.

Answer:Because plastic products are durable, they can last for a long time. This makes them affordable because they do not have to be replaced often. On the other hand, the popular use of plastics means that many plastics are thrown away. Plastics litter the ocean, causing harm to marine birds and mammals. Plastic breaks down into plastic dust, which can last for up to a thousand years.

^^^^^copy and paste this part^^^^^

Explanation:Plastic is he hardest material to break down with harm to sea life and land life they may be affordable but costly to the environment.

Answer: The answer is the ''The moon is always lit up by the sun for us to see.''

Explanation: The moon is directly illuminated by the sun.

Answer:

15.9994 grams

You can view more details on each measurement unit: molecular weight of Oxygen or grams The molecular formula for Oxygen is O. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Oxygen, or 15.9994 grams.

Explanation:

Answer:

First you need to know the Chemical formula for Nitrous acid which is HNO₂

Explanation:

Answer:

Linear molecule with two domains

Explanation:

Answer:

any of the seven chemical elements that make up Group 18 (VIIIa) of the periodic table. The elements are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og). :)

Explanation:

Answer:

For edge, the answer is;

D. Xe

(Xenon)

Explanation:

edg- answers ;p

Answer:

70.88 mL volume of 1.27 M of HCl is required.

Explanation:

Given data:

Initial volume = ?

Initial  molarity =  1.27 M

Final volume = 197.4 mL

Final molarity = 0.456 M

Solution:

Formula:

M₁V₁ = M₂V₂

Now we will put the values in formula.

1.27 M × V₁ =  0.456 M × 197.4 mL

V₁ = 0.456 M × 197.4 mL/1.27 M

V₁ = 90.014M.mL/1.27 M

V₁ = 70.88 mL

70.88 mL volume of 1.27 M of HCl is required.

Answer: here is your answer

Explanation: You are visiting your Grandmother and notice that she is eating a balanced diet, taking vitamins, getting the proper amount of sleep and is not overweight. Despite her healthy lifestyle, she appears run down and tired. You realize that it's due to her lack of physical activity. Write a convincing letter to your grandma explaining the benefits of participating in regular physical activity.

Answer:

POTASSIUM

Explanation:

2 8 8 1________ 1A

Answer:

C

Explanation:

Hope this helps :)

Answer:

Therefore, 54.45 g of Ammonium sulphate is required

Explanation:

Molar mass of ammonium sulphate, (NH₄)₂SO₄ = 132 g/mol

Since density of solution is 1.10 g/ml, a 1 mL solution has mass = 1.10 g

275 mL solution will have a mass = 275 * 1.10 = 302.5 g

Since the solution is 18% ammonium sulphate by weight,

mass of ammonium sulphate present in 275 mL solution = 302.5 * 18/100

mass of ammonium sulphate present in 275 mL solution = 54.45 g

Therefore, 54.45 g of Ammonium sulphate is required

Answer:

The answer is D - Atom

The smallest unit of an element that can exist either alone or in combination with other such particles of the same or different elements is the atom.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

Answer:

valence electrons

Explanation:

The valence electrons are the outer most electrons and the principal energy level in which they belong will vary for .

The chemical element which contains four (4) electrons in its third and outer main energy level is: Silicon (Si).

An electron shell can be defined as the outermost shell of an atom of a chemical element around the atomic nucleus.

Hence, an electron shell is an orbital that is typically accompanied by electrons around the nucleus of an atom.

A sublevel is also referred to as an orbital and it can be defined as an energy level that is associated with the electrons found outside the atomic nucleus.

In Chemistry, there are four main (4) types of sublevel and these are:

In the third (3rd) energy level, there are only three (3) sublevels and these are; s, p and d sublevels.

Silicon is a chemical element that is found in group (4) of the periodic table because it has four (4) electrons in its third and outermost shell.  

In its ground state, Silicon (Si) contains the following number of electrons:

Read more: https://brainly.com/question/18214726

Answer:

Salt domes storage has advantages in cost, security, environmental risk, and maintenance. Salt formations offer the lowest cost, most environmentally secure way to store crude oil for long periods of time. Stockpiling oil in artificially-created caverns deep within the rock-hard salt costs historically about $3.50 per barrel in capital costs. Storing oil in above ground tanks, by comparison, can cost $15 to $18 per barrel - or at least five times the expense. Also, because the salt caverns are 2,000-4,000 feet below the surface, geologic pressures will sea; any crack that develops in the salt formation, assuring that no crude oil leaks from the cavern. An added benefit is the natural temperature differential between the top of the caverns and the bottom - a distance of around 2,000 feet; the temperature differential keeps the crude oil continuously circulating in the caverns, giving the oil a consistent quality.

Answer: Aluminum

Explanation:

Al3+ indicates an ion of aluminum having a charge of + 3. I.e., since an aluminum atom normally has 13 protons and 13 electrons, this ion has 10 electrons (-10 charge) and 13 protons (+ 13 charge) giving it a charge of + 3 (-10 + 13 = +3).

Answer:

Explanation:

Al3+ indicates an ion of aluminum having a charge of + 3. I.e., since an aluminum atom normally has 13 protons and 13 electrons, this ion has 10 electrons (-10 charge) and 13 protons (+ 13 charge) giving it a charge of + 3 (-10 + 13 = +3).

ccto.

Answer:

2.00g/ml

Explanation:

If water has a density of 1.00g/ml, and theres

40ml of it, it would weigh 40g

The substance is twice as dense as water, making its density 2.00g/ml

Answer:

seafloor spreading

Explanation:

i took the test

Answer:

Inductive reasoning

Explanation:

Inductive reasoning is based on making broad generalizations from specific observations. We draw conclusions from the data we have. This is the opposite of deductive reasoning, which starts with a general statement and aims to reach a specific conclusion.

Based on this, we can conclude that, if an investigator uses their knowledge, training, experience, and expertise to reach a conclusion, they are using inductive reasoning.

Answer:

this atom has nine electrons

Answer:

Required heat = 2,259.36 N (approx)

Explanation:

Given:

Mass = 135 g

Specific heat (c) =4.184 J/gC

Change in temperature ΔT = 27-23 = 4 c

Find:

Required heat

Computation:

Q = mcΔT

Q = (135)(4.184)(4)

Required heat = 2,259.36 N (approx)

The heat transferred by the chemical reaction to the reservoir of a calorimeter containing 135 g of dilute aqueous solution is 2259.36 J

To solve this question, we'll begin by calculating the change in the temperature of the reservoir. This can be obtained as follow:

Initial temperature (T₁) = 23 °C

Final temperature (T₂) = 27 °C

ΔT = T₂ – T₁

ΔT = 27 – 23

Finally, we shall determine the heat transferred to the reservoir.

Change in temperature (ΔT) = 4 °C

Mass (M) = 135 g

Specific heat capacity (C) = 4.184 J/gºC

Q = MCΔT

Q = 135 × 4.184 × 4

Therefore, the heat transferred by the chemical reaction to the reservoir of a calorimeter containing 135 g of dilute aqueous solution is 2259.36 J

Learn more: https://brainly.com/question/10286596