Answer:
A hydraulic press works on the principle of Pascal's law, which states that when pressure is applied to a confined fluid, the pressure change occurs throughout the entire fluid. Within the hydraulic press, there is a piston that works as a pump, that provides a modest mechanical force to a small area of the sample.
Explanation:
A student noted that the sign shown here is always associated with a wheelchair ramp at or near a staircase or entrance steps. What statement best identifies the reason why wheelchair ramps are used to move people up a staircase or steps?
The main reason why wheelchair ramps are used to move people up a staircase is because it has a high mechanical advantage which leads to a greater efficiency in moving people up the staircase.
Let the height of the staircase = hLet the length of the ramp = L
The mechanical advantage of the ramp is calculated as follows;
[tex]M.A = \frac{L}{h}[/tex]
As the length of the ramp increases, people will be move up to a greater distance up the staircase.
Thus, the main reason why wheelchair ramps are used to move people up a staircase is because it has a high mechanical advantage which leads to a greater efficiency in moving people up the staircase.
Learn more about mechanical advantages of ramps here: https://brainly.com/question/200179
Can someone help me with this physics question? I don't know which answer is correct.
3. Distance is a quantity that is always a vector.
B.
what are the three elements that can be used to make a magnet?
Answer:
Iron, cobalt, and nickel are the only three naturally occurring elements that are magnetic.
Explanation:
hope it helps
correct me if I'm wrong thank you
brainliest please
Answer:
The three elements that can be used to make a magnet are :
Aluminum, nickel and cobalt
The definition of energy is the ability to ___________.
(Hint: one word)
Which of the balls will exert the greatest force on object A?Why?
F = mass × Acceleration ( give Acceleration is 9.8 )
So force of 5 kg mass on A is
F = 5 × 9.8 = 49N
Force of mass 1 kg on A
F = 1 × 9.8 = 9.8 N
Force of mass 10 kg on A is
F = 10 × 9.8 = 98N
Clearly the 10 kg ball experts the most force cause it has more mass
a truck in a traffic circle travels in a circular path at constant speed v0 while passing through region x of the circle, as shown in figure 1 above. a diagram representing the forces exerted on the truck in region x is shown in figure 2. at a later time a car with less mass than the truck passes through region x at the same speed and the same distance from the center of the traffic circle as the truck. the coefficient of friction between the car’s tires and the ground is the same as that for the truck’s tires and the ground. which of the following diagrams could represent the forces exerted on the car in region x compared to the truck in region x ? assume that the length of each arrow is proportional to the magnitude of the force represented by the arrow.
The Diagram that represents the forces exerted on the car in region x when compared to the truck in region X is : Diagram C
Given that the mass of the car is less than the mass of the truck the force due to gravity will be greater on the truck than it could be on the car
i.e. | Fg |car < | Fg | truck
also : | Fₙ | car < | Fₙ | truck
Since the gravitational force on the car is less than the gravitational force on the truck
| Ff | car < | Ff | truck
where : Ff = frictional force
Fg = force due to gravity
Fn normal force
Therefore from the diagrams attached below the correct diagram that represents the forces exerted on the car in region x when compared to the truck in region X is : Diagram C.
Learn more about gravitational force : https://brainly.com/question/1550731
Attached below is the missing data related to your question
If the action force is the swimmer pushing water in the leftward direction, what is the reaction force?
PLEASE ANSWER
CORRECTLY PLS
Answer:
The reaction force is the water pushing the swimmer in the rightward direction.
Hope you could get an idea from here.
Doubt clarification - use comment section.
A current of 2.0 A flows through a flashlight bulb when it is connected
across the terminals of a 5 V battery. What is the energy dissipated by this
bulb during 1 hour of continuous working?*
Using Joules law
[tex]\\ \sf\Rrightarrow H=VIt[/tex]
[tex]\\ \sf\Rrightarrow H=5(2)(1)[/tex]
[tex]\\ \sf\Rrightarrow H=10Kwh[/tex]
what is the theory relativity by Einstein?
:MAIN ANSWER:
determined that the laws of physics are the same for all non-accelerating observers
Explanation:
Albert Einstein, in his theory of special relativity, determined that the laws of physics are the same for all non-accelerating observers, and he showed that the speed of light within a vacuum is the same no matter the speed at which an observer travels, according to Wired.
HOPE IT HELPS
#CARRY ON LEARNING
HAPPY HOLIDAYS DEC 2021
The strings in a compound bow behave approximately like a
spring. A bowstring is pulled back 0.60 m with a maximum force of
267 N (AKA a 60-pound draw weight) to shoot an 18 g arrow.
Assume energy is conserved.
a) At what speed would the arrow be launched? (Note: W = FΔd uses the average
force while F = -kx uses the instantaneous force.)
The speed at which the arrow would be launched is 133.42 m/s
The work-energy theorem asserts that the net work done applied by the forces on a particular object is equivalent to the change in its kinetic energy.
The equation for the work-energy theorem can be computed as:
[tex]\mathbf{W =\Delta K.E}[/tex]
[tex]\mathbf{F\Delta x =\dfrac{1}{2} mv^2}[/tex]
where;
Force (F) = 267 Ndistance Δx = 0.60 mmass (m) = 18 gspeed (v) = ???From the above equation, let make speed(v) the subject of the formula:
∴
[tex]\mathbf{v = \sqrt{\dfrac{2(F \Delta x)}{m}} }[/tex]
[tex]\mathbf{v = \sqrt{\dfrac{2(267 \times 0.60)}{0.018}} }[/tex]
v = 133.42 m/s
Learn more about the work-energy theorem here:
https://brainly.com/question/17081653
Please answer the following question!
What is the momentum of a 750-kg Volkswagen Beetle when at rest?
Please give the value and momentum!
Answer:
0
Explanation:
the momentum will always be 0 when it is at rest because the object isnt moving!
Hope this helped!
how to find velocity with constant acceleration
Answer:
velocity = distance / time
example:
if a body moves "20" meters in "2" seconds
, then it's velocity = 20/2 = "10m/s"
What happens to all light bulbs in a series circuit when one burns out?
Answer:
In a series circuit, every device must function for the whole circuit to be complete. One bulb burning out in a series circuit breaks the circuit. Even if you take a bulb out, the entire circuit will still stop operating. There is no closed-loop path for the current to flow through the circuit. For the whole series circuit to be complete, and on, every bulb must be working.
Explanation:
what does the geocentric model of the solar system look like
is atom on the offficial repository of ubuntu ?
Answer:
Atom, the cross-platform, open source code editor developed by Github, has become quite popular thanks to its plug-ins and embedded Git Control. ... There are, however, official Atom repositories for some Linux distributions, like Ubuntu, Debian, Fedora, Red Hat, CentOS, and open.
The frequency of a wave is 4hz. If the wavelength is 2m how fast is the water moving?
I need the Formula,Known,Substitute & Solve Answer with Units
Answer:
This is the answer that I got
Explanation:
Hope it is right.
How do you un rewrap something?
what is the capaceter
Answer:
capacitor, device for storing electrical energy, consisting of two conductors in close proximity and insulated from each other. A simple example of such a storage device is the parallel-plate capacitor.
Explanation:
Hope it's help
please brainless me :)
Hope you could get an idea from here.
Doubt clarification - use comment section.
How many cm3 are there in 1 dm3?
The answer is in the picture.
Which would ba another example of newtons first law?
Select the correct answer. What are the directions of an object's velocity and acceleration vectors when the object moves in a circular path with a constant speed? A. The question is meaningless, since the acceleration is zero.
B. The vectors point in opposite directions.
C. Both vectors point in the same direction.
D. The vectors are perpendicular.
The centripetal acceleration which always act toward the center of the circle. The vectors are perpendicular. The correct answer for this question, is option D
The speed of an object is always constant in a circular motion while the object keeps changing direction regularly. The velocity will keep changing because of the change in direction.
Whenever there is a change in velocity, there must be acceleration.
When the object is moving in a circular path with a constant speed, the directions of an object's velocity and acceleration vectors will be perpendicular to each other
The reason is because acceleration is centripetal acceleration which always act toward the center of the circle.
Therefore, the correct answer for this question, is option D
Learn more about circular motion here: https://brainly.com/question/10493657
A cheetah runs at an average speed of 60mph. find the distance it runs in 30 s
Answer:60mph means it runs every minute.
Explanation: because it makes sense.
Answer:
2640 ft, or 1/2 mile
Explanation:
Recognizing that 30 s = 0.5 min, we can convert the units like this.
distance = speed × time
distance = (60 mi/h) × (1 h/(60 min)) ×(0.5 min) = 0.5 mi
In feet, that is ...
(5280 ft/mi)(0.5 mi) = 2640 ft
A cheetah runs 1/2 mile, or 2640 feet in 30 s.
How much power is used in question #2 if the power time was 100secs
I really need the Formula, substitute & solve , answer with units.
Answer:
I just put a random number for the work
Explanation:
I hope it is ok.
A car is being towed. What is the car’s
mass if the net force on the car is 4,000 N and it has an
acceleration of 2.5 m/s^2?
Mass of the car having acceleration 2.5 m/s² and net force 4000 N is 1600 kg.
What is force ?A physical cause that can change the state of motion or rest of a body is called force. It is the product of mass and acceleration off the body.
Here,
Net force acting on the car, F = 4000 N
Acceleration of the car, a = 2..5 m/s²
We know that,
F = ma
So, m = F/a
m = 4000/2.5
m = 1600 kg
Hence,
Mass of the car having acceleration 2.5 m/s² and net force 4000 N is 1600 kg.
To learn more about force, click:
https://brainly.com/question/1046166
#SPJ3
Can someone please give me the (Answers) to this? ... please ...
Answer:
Jake’s horse will only need to exert enough force to make the carriage accelerate. Even though the carriage will pull on the horse as well, that force is not enough to make the horse accelerate in the direction of the carriage because it is only strong enough to make the carriage accelerate, not the horse.
Explanation:
Additional info: the horse has more mass than the carriage does so it would require a stronger force to make the horse accelerate.
Answer: Jake’s horse will only need to exert enough force to make the carriage accelerate .Since the horse has a greater mass than the carriage, it requires a stronger force to make the horse accelerate.
Explanation: Sorry it took so long lol
Which electromagnetic wave has a lowest frequency?
Group of answer choices
A) x-rays
B) ultraviolet light
C) microwaves
D) infrared light
E) visible light
Answer:
E.visible lights
Explanation:
llll
hope its attachments
Which design of the walls would be most desirable help avoid echoes?
A
They should use bumpy walls for all four sides.
B
They should use bumpy walls for only one side.
С
They should use smooth walls for all four sides.
D
They should use smooth walls for only one side.
Answer:
a
Explanation:
because the sound wont bounce off
What type of bond is found in pure gold?
A) Metallic
B) Ionic
C)Covalent
D)Diatomic
The type of bond found in pure gold is metallic bonding, indicated by metallic bonds. Therefore option A is correct.
Metallic bonding occurs between metal atoms, such as gold, and is characterized by the sharing of electrons among a sea of delocalized electrons.
In metallic bonds, the valence electrons of metal atoms are not strongly bound to any particular atom but are free to move throughout the metal lattice.
This sharing of electrons gives rise to properties such as high electrical and thermal conductivity, malleability, and ductility, which are characteristic of metals like gold.
Unlike ionic or covalent bonds, metallic bonds do not involve the transfer or sharing of electrons between different elements.
Know more about metallic bonding:
https://brainly.com/question/29762857
#SPJ6
BRAINLIST!!!
Two metallic balls A and B carry the charges QA= 16×10^-9C and QB=-8×10^-9C.
We fixed balls A and B 5cm apart. Given e=1.6×10^-9C and k=9×10^9 S.I unit.
1) identify the ball that has excess of electrons.
2) calculate the number of deficit and excess of electrons on both balls.
3) calculate the force exerted by A on B.
What is the kinetic energy of a toy truck with a mass of 0. 75 kg and a velocity of 4 m/s? (Formula: ) 3 J 6 J 12 J 24 J.
The kinetic energy of a toy truck with a mass of 0. 75 kg and a velocity of 4m/s is 6J.
HOW TO CALCULATE KINETIC ENERGY:
The kinetic energy of a moving body can be calculated by using the following formula:
K.E = ½mv²
Where;
K.E = kinetic energy (J)m = mass (kg)v = velocity (m/s)According to this question, a toy truck has a mass of 0.75 kg and a velocity of 4 m/s. The kinetic energy is calculated as follows:
K.E = ½ × 0.75 × 4²
K.E = 8 × 0.75
K.E = 6J
Therefore, the kinetic energy of a toy truck with a mass of 0. 75 kg and a velocity of 4m/s is 6J.
Learn more about kinetic energy at: https://brainly.com/question/999862?referrer=searchResults