Convert a speed of 933 cm/s to units of inches per minute

Answers

Answer 1

Answer:

220000 in/min

Explanation:

Step 1: Write out conversions

1 in ≈ 2.54 cm

60 sec = 1 min

Step 2: Set up dimensional analysis

[tex]\frac{933cm}{s} (\frac{60s}{1min} )(\frac{1in}{2.54cm} )[/tex]

Step 3: Evaluate

220039.4 in/min

Step 4: Sig figs

There are 3 sig figs

220039.4 in/min ≈ 220000 in/min


Related Questions

Which is most reactive toward electrophilic aromatic substitution?

Answers

Complete Question

Which is most reactive toward electrophilic aromatic substitution?

A  Phenol

B  Anisole

C  Nitro-benzene

D  Benzene

Answer:

The correct option is  A

Explanation:

Generally the rate at which electrophilic aromatic substitution reaction occur is dependent on the nucleophilicity(nucleophile strength  ) of Benzene ring.Now a functional group  which increase the electron density in the benzene ring when attached to it increases its  nucleophilicity and this in-turn will increase the rate at which electrophilic aromatic substitution reaction occur

Now   Phenol is a compound that is made up of  OH functional group and then the benzene ring

    Anisole is a compound that is made up of  [tex]OCH_3[/tex] functional group and then the benzene ring

    Nitro-benzene is a compound that is made up of  [tex]NO_2[/tex] functional group and then the benzene ring  

Now since OH is the highest In series of activating group compared to the activation groups we are considering (i.e  [tex]OCH_3[/tex]  and [tex]NO_2[/tex] )

Then  Phenol is the answer

     

   

any help with these questions would help i'm lost

Answers

Answer:

1.  31.25 mL

2.  1.98 g/L

3.  0.45 g/mL

Explanation:

For each of the problems, you need to perform unit conversions.  You need to use the information given to you to convert to a specific unit.

1.  You need volume (mL).  You have density (g/mL) and mass (g).  Divide mass by density.  You will cancel out mL and be left with g.

(50.0 g)/(1.60 g/mL) = 31.25 mL

2.  You are given grams and liters.  You need to find density with units g/L.  This means that you have to divide grams by liters.

(0.891 g)/(0.450 L) = 1.98 g/L

3.  You have to find density again but this time with units g/mL.  Divide the given mass by the volume.

(10.0 g)/(22.0 mL) = 0.45 g/mL

two things we can learn from fossils.

Answers

Answer:

fossils come from way back they can be left from dinosaurs and other species  

Explanation:

Answer:

Using fossils, you can learn about extinct animals and plants, that's one. Two, you can learn about evolutionary traits and the fact that evolution exists.

Explanation:

Give two examples of rocks composed of only one material.

Answers

Answer:

pyroxenite, quartzite, dunite (over 90% olivine), anorthosite (over 90% plagioclase feldspar), marble, chalk, gypsum

Explanation:

Which phrase best describes the outer planets?
rocky with few moons
gaseous with slow rotations
dense with few moons
gaseous with low density

Answers

Answer: D. Gaseous with low density

Explanation: Took the test :)

Answer:

gaseous with low density

Explanation:

How many moles of calcium are in 5.82g of calcium?

Answers

Answer:

0.024951344877489 mole.

Explanation:

y

Which of the following is true for all chemical reactions? The total mass of the reactants increase. The total mass of the products is greater than the total mass of the reactants. The total mass of the products is less than the total mass of the reactants. The total mass of the reactants equals the total mass of the products.

Answers

Answer:

The total mass of the reactants equals the total mass of the products.

Explanation:

The true statement for all chemical reactions is that the total mass of the reactants equals the total mass of the products.

What is chemical reaction?

Chemical reactions are those reactions in which reactants react with each other and converted into products for the completion of the reaction.

Let us assume a chemical reaction:

A + B → C + D

Where, A & B are reactants which are converted into products C & D. Means mass of reactants will convert into the mass of products as it follows the law of conservation of mass.

So, total mass of the reactants equals the total mass of the products.

To know more about conservation of mass, visit the below link:
https://brainly.com/question/9912077

Which ocean zone lies inside V-shaped ocean trenches? O A. Bathypelagic O B. Abyssopelagic Ο Ο Ο Ο O C. Mesopelagic O D. Hadalpelagic​

Answers

Answer:

O D. Hadalpelagic is the answer.

Explain why CaCl2 is likely to have properties similar to those of CaBr2

Answers

Answer:

Because both CaCl2 and CaBr2 both contain elements (Chlorine and Bromine) from the same group (group 7)

Explanation:

Elements are placed into different groups in the periodic table. Elements in the same group are those that have the same number of valence electrons in their outermost shell and as a result will behave similar chemically i.e. will react with other elements in the same manner.

Chlorine and Bromine are two elements belonging to group 7 of the periodic table. They are called HALOGENS and they have seven valence electrons in their outermost shell. Hence, when they form a compound with Calcium, a group two element, these compounds (CaCl2 and CaBr2) will possess similar properties because they have elements that are from the same group (halogen group).

The compounds of [tex]\rm CaCl_2[/tex] and [tex]\rm CaBr_2[/tex] have similar chemical properties as they are constituted of elements belonging to the same group.

The compounds with the elements belonging to the same group have similar chemical properties. It has been given that the chemical properties of elements have been dependent on the number of valence electrons.

The given compounds have been calcium chloride and calcium bromide. The calcium has been the same cation in the compounds however, the anions are different.

The anion Cl and Br both belongs to group 17 and have 7 valence electrons. Thus, the compounds have been possessing similar chemical properties.

Thus, calcium chloride and calcium bromide are more likely to have similar chemical properties as they have elements belonging to the same group.

For more information about chemical properties, refer to the link:

https://brainly.com/question/18327661

2. Jacy bought a gold necklace weighing 21.3 grams from a flea market She filled a 10ml graduated cylinder with water to the 50 mL mark and dropped her necklace in. The level in the graduated cylinder rose to 7.4mL is her necklace real or fake? If not, identify the possible composition of her necklace
Gold: 19.3 g/cm^3
Copper 8.86 g/cm^3
Bronze: 9.87 g/cm^3​

Answers

Answer:

The necklace is fake.

The necklace is made up of copper.

Explanation:

The following data were obtained from the question:

Mass of the necklace = 21.3 g

Volume of water = 5 mL

Volume of water + Necklace = 7.4 mL

To identify the composition of the necklace, we shall determine the density of the necklace.

This can be obtained as follow:

We'll begin by calculating the volume of the necklace. This can be obtained as shown below:

Volume of water = 5 mL

Volume of water + Necklace = 7.4 mL

Volume of Necklace =.?

Volume of Necklace = (Volume of water + Necklace) – (Volume of water)

Volume of Necklace = 7.4 – 5

Volume of Necklace = 2.4 mL

NOTE:

1 mL = 1 cm³

Therefore,

Volume of Necklace = 2.4 mL = 2.4 cm³

Finally, we shall determine the density of the necklace as follow:

Mass of the Necklace = 21.3 g

Volume of Necklace = 2.4 cm³

Density of Necklace =?

Density = mass /volume

Density = 21.3 / 2.4

Density = 8.87 g/cm³

Therefore, the density of the necklace is 8.87 g/cm³.

From the question given above, we were told Jacy bought a gold necklace.

But comparing the density of necklace to the densities given above the necklace is obviously made of copper material.

Therefore, Jacy bought a fake gold necklace.



Which option gives an object's volume in SF units?

O

A. 4.3 kg

B. 2.6 m3

C. 5.5 K

D, 3.4L

SUBMIT

Answers

Answer:

The correct answer is:

2.6 m3 (B)

Explanation:

SF unit stands for Stowage factor unit. Stowage factor is the volume occupied by one unit of mass (weight) when stowed in cargo space. SF expresses the unit in cubic meters (m³) or cubic feet. SF is a unit of measurement that indicates how much space (volume) a particular unit of cargo occupies  in a ship's cargo compartment

3. Calculate each of the following:
a) kg of 4.6x1021 molecules of nitrogen dioxide
b) moles of chlorine atoms in 0.615 g of C2H4Cl2
c) number of hydride ions in 5.82 g of strontium hydride

Answers

Answer:

the answers are at the very bottom of each picture

Explanation:

i really hope this helps you:)

Which of the following are observations? Select all that apply.
A. Watching table salt dissolve in waters'
B. Feeling the sensation of ice held in the hand.
C. Smelling ammonia used in a cleaning solution.
D. Hearing a loud bang when a balloon filled with hydrogen gas is ignited.
E. Looking at the readout of a digital scale when measuring reagents for an experiment.

Answers

Answer:

A and E

Explanation:

Observing means looking or watching with the eyes etc..

Observation is the component of research and involves inspection of the hypothesis. Dissolving table salt and reading a digital scale is an example of observation. Thus, options A and E are correct.

What is an observation?

Observation is that the component of the experimental style that defines observance or the review of the activity that underwent sure conditions.

It will be seen as a press release supported hearing, vision, etc. The dissolving of the flavorer is associate degree noticeable task wherever one will see the salt gets dissolved within the water to create a combination.

Similarly, the digital scales are used to measure the substances and use a readouts to estimate the quantity of the reagents to be used by directly seeing on the digital screen of the machine.

Therefore, dissolving salt and digital scale is observable.Hence options A and E are correct.

Learn more about observations here:

brainly.com/question/28041973

#SPJ2

If ΔH vaporization of water (H2O) is 40.7 kJ/mol,
and the ΔS for vaporization of H2O is 109 J/mol K,
what is ΔG for water vaporization at 350K?
Include units.

Answers

Answer:

2.6 kJ/mol

Explanation:

Step 1: Given data

Standard enthalpy of vaporization of water (ΔH°): 40.7 kJ/molStandard entropy of vaporization of water (ΔS°): 109 J/mol.KAbsolute temperature (T): 350 KStandard Gibbs free energy of vaporization of water (ΔG°): ?

Step 2: Calculate ΔG°

We can calculate ΔG° using the following expression.

ΔG° = ΔH° - T × ΔS°

ΔG° = 40.7 kJ/mol - 350 K × 0.109 kJ/mol.K

ΔG° = 2.6 kJ/mol

The change in Gibbs free energy, ΔG for the water is 2.55 KJ/mol

Data obtained from the question

From the question given above, the following data were obtained:

Standard enthalpy of vaporization of water (ΔH°) = 40.7 kJ/molStandard entropy of vaporization of water (ΔS°) = 109 J/Kmol = 109 / 1000 = 0.109 KJ/Kmol Absolute temperature (T) = 350 KStandard Gibbs free energy (ΔG°) =?

How to determine the Gibbs free energy, ΔG°

The Gibbs free energy, ΔG° can be obtained as illustrated below:

ΔG° = ΔH° – TΔS°

ΔG° = 40.7 – (350 × 0.109)

ΔG° = 40.7 – 38.15

ΔG° = 2.55 KJ/mol

Learn more about Gibbs free energy:

https://brainly.com/question/9256736

An increase in temperature usually slows down a chemical reaction.

True or false? Because?

Answers

The answer to this question is false

Consider a closed container of gas that is a mixture of 30% CO2 and 70% N2 at room temperature 20°C. The gases are in thermal equilibrium with one another. a) Which has the higher kinetic energy, the average CO2 or N2 molecule? b) What is that root-mean-square velocity of a CO2 molecule? For reference, a carbon atom has 6 protons, a nitrogen atom has 7 protons, and an oxygen atom has 8 protons.

Answers

Answer:

a. the kinetic energy will be the same.

b. [tex]\mathbf{\overline v = 407.65 \ m/s}[/tex]

Explanation:

The kinetic theory deals with how the arrangement of particles of a substance determines the properties that substance will possess and the state in which it is likely to be found under a given set of conditions. From the postulates of the kinetic theory of gases, The average kinetic energy of the gas molecules is a measure of the temperature of the gas molecules, This implies that the kinetic energy is dependent on the temperature.

i.e

[tex]K.E = \dfrac{3}{2} \ KT[/tex]

where ;

K = Boltzmann Constant

Since the given gases are in thermal equilibrium, therefore, the kinetic energy will be the same.

b).

The root mean square velocity of CO2 molecule is represented by the equation :

[tex]\overline v = \sqrt{\dfrac{3RT}{M_m}}[/tex]

[tex]\overline v = \sqrt{\dfrac{3\times 8.314 \ J/K /mole \times (293.15 \ K ) }{44 \times 10^{-3} \ kg / mol}}[/tex]

[tex]\overline v = \sqrt{\dfrac{7311.7473 }{44 \times 10^{-3} }}[/tex]

[tex]\overline v = \sqrt{166176.075 \ m/s}[/tex]

[tex]\mathbf{\overline v = 407.65 \ m/s}[/tex]

Which of the following represents the least number of molecules?
(a) 20.0 g of H2O (18.02 g/mol)
(b) 77.0 g of CH4 (16.06 g/mol)
(c) 68.0 g of CaH2 (42.09 g/mol)
(d) 100.0 g of N2O (44.02 g/mol)
(e) 84.0 g of HF (20.01 g/mol)

Answers

Answer:

A ; 20g of water has the least number of molecules

Explanation:

Here, we want to know which of the options represent the least number of molecules;

To calculate this, we are going to first calculate the number of moles using the formula below;

Number of moles = mass/molar mass

Then from the number of moles, we can calculate the number of molecules by multiplying the number of moles by 6.02 * 10^23 molecules

Let’s proceed;

a. That will be 20/18.02 = 1.1099 moles

1.1099 * 6.02 * 10^23 = 6.68 * 10^23 molecules

b. That will be 77/16.06 = 4.8 moles

4.8 * 6.02 * 10^23 = 2.89 * 10*24 molecules

c. That will be 68/42.09 = 1.62 moles

1.62 * 6.02 * 10^23 = 9.73 * 10^23 molecules

d. That will be 100/44.02 = 2.27 moles

2.27 * 6.02 * 10^23 = 1.37 * 10^24 molecules

e. That will be = 84/20.01 = 4.2 moles

4.2 * 6.02 * 10^23 = 2.53 * 10^24 molecules

From all the values obtained, the lowest is 20g of water

HELP 100 POINTS WILL MARK BRAINLIEST In ancient times, early astronomers watched stars travel across the sky in one direction for several months, then over the course of a few weeks the stars would reverse course and move in the opposite direction. After these few weeks, the stars would reverse direction again and resume their original course. The ancient astronomers called these “wanderer stars”. After more research was done, it was found that these “wanderer stars” were actually other planets. As more data was collected, it was shown that all planets move at different speeds as they travel in their orbits around the Sun. As the Earth moves in its orbit, it moves faster than some planets and slower than others. This causes the Earth to “pass” some planets as it travels, which results in the appearance that the other planets move backwards. Is this a description of a scientific law or scientific theory? 100 points PLEASE HELP

Answers

It’s the description of a scientific law

because Astronomers call this the “retrograde motion”. It’s just our viewpoint from earth. The plants aren’t actually changing directions. For example, Mars has the largest retrograde motion. Since Mars is further from the Sun than our planet, it orbits the Sun slower, meaning Earth on the inside track can catch it up and then overtake it.

Making a Lis changing something to improve your work. A) scenario
B) revision
C) entry event
D) wish list​

Answers

the correct answer is revision

Enter the full electron configuration for S2�. What is the atomic symbol for the noble gas that also has this electron configuration?

Answers

Answer:

1. Electronic configuration of sulphide ion S²¯ (18) => 1s² 2s²2p⁶ 3s²3p⁶

2. Ar

Explanation:

1. S²¯ simply indicates that the sulphur atom (S) has gained two extra electrons.

Thus we shall write electron configuration of sulphur (S) and sulphide ion (S²¯) as follow:

The electronic configuration of S²¯

S (16) => 1s² 2s²2p⁶ 3s²3p⁴

S²¯ (18) => 1s² 2s²2p⁶ 3s²3p⁶

2. Determination of the noble gas element that has the same electronic configuration as S²¯.

This is illustrated below:

Sulphur (S) has 16 electrons while the sulphide ion (S²¯) has extra 2 electrons making it to have a total electron of 18. Observing the elements in the periodic table, only Argon has 18 electrons with electronic configuration as:

Ar (18) => 1s² 2s²2p⁶ 3s²3p⁶

Therefore, sulphide ion (S²¯) has the same electronic configuration as Argon (Ar).

2. Chemical changes often cannot be reversed because they
produce new chemical substances.
TRUE
FALSE

Answers

Answer:

True

Explanation:

Answer:

True...

I’ve tooken a test like that before

What is the average pressure exerted by the molecules on the walls of the container?

Answers

Answer:

This question appears to be incomplete

Explanation:

However, we know that one of the kinetic theories of gases is that gas molecules collide with one another and against the walls of the container (in which they are stored); hence exerting there pressure on the walls of this container.

Ideal gases are the most suitable for this theory because it's molecules are far apart and do not exert any attractive forces towards one another; hence it's molecules move "undisturbed" or "freely". For ideal gases, the average pressure exerted by by the gas molecules on the walls of the container can be calculated as

PV = nRT

Where P = pressure (in atmosphere, atm or kilopascal, KPa or millimeter mercury, mmHg)

V = volume (in liters)

n = number of molecules

R = ideal gas constant (8.3145 J·mol⁻¹·K⁻¹)

T = temperature (in kelvin)

what variables effect whether or not the fishing weight floats

Answers

Answer:The fishing way and how fast is going

Explanation:Because of the variables the fishing we will flow much more faster

An aluminum cylinder has a radius of 3.2 cm and a length of 8.6 cm. What is the mass of the aluminum cylinder if aluminum has a density of 2.7 g/cm3?


please help :)

Answers

Answer:

750g of Aluminum

Assuming 8.6 cm lenth is the height of the cylinder. The volume of a cylinder is: V = [tex]\pi[/tex]*r^2*h

V = 3.14cm x 10.24cm x 3.6cm

V = 280cm^3

Now density = mass/volume

2.7g/cm^3 = mass/280cm^3

2.7g/cm^3 x 280cm^3 = mass/280cm^3 x 280cm^3

= 750g of Aluminum

Part Of flowers that contains pollen is


Please answer right

Answers

Answer:

its the stamen, it also supports the Anther.

Answer:

The Stamen

Explanation:

The stamen is a slender filament supporting the anther, it is what produces and holds pollen in flowers.

how many atoms are in 2 miles of h2o

Answers

Answer:

one mole of water contains 6.02 x 1023 MOLECULES of water.

But each molecule of water contains 2 H and 1 O atom = 3 atoms, so there are approximately 1.8 x 1024 atoms in a mole of water.

Explanation:

hope it helps you paigegeorge

what is the density or 40 mL of liquid that has a mass of 20 grams help ASAP​

Answers

Answer:

Density of 40 mL of liquid that has a mass of 20 g = 20 / 40 = 0.5 g / cc

Answer:

Density= mass/volume

Density= 20/40

Density= 0.5g/mL

What is the charge of a chromium ion that has lost 4 electrons?

Answers

Answer:

+2.

Explanation:

Hello,

In this case, since chromium has six valence electrons in its outer shell, when it loses four electrons it remains with two of them, therefore it charge as chromium ion is +2, so it is written as Cr⁺² and named as chormium (II) or hypochromous ion.

Best regards.

Name some coping skills that can be used besides
nicotine vape and or vaping marijuana.

Answers

Exercise, drinking water, friends, anything that can take your mind off those topics
Spend time with your friends or family, being socially active helps me in a lot of things, spend time doing your hobbies..

Which of the following is a description of an exothermic reaction?

A. releases heat
B. reactants have less enthalpy than the products
C. ∆H is positive
D. gets cold

Answers

A description of an exothermic reaction is it releases heat. The correct option is A.

What is an exothermic reaction?

An exothermic reaction is a reaction in which heat is released into the atmosphere. In these reactions, less energy is needed to start the reaction and the energy is released when bonds are made in the products. Delta H is always negative in these reactions.

Energy is always given off when the reaction happened, in the form of heat and light. Examples are burning of wood, melting of ice, combustion, corrosion, etc.

Thus, the correct option is A. releases heat regarding a description of an exothermic reaction.

Learn more about exothermic reaction, here:

https://brainly.com/question/18523044

#SPJ5

Other Questions
Which investigative process is most helpful for learning about past societies? A volcano in the ocean rises approximately 14,000 feet above sea level. Its base is approximately 20,000 feet below sea level. What is the total height of the volcano? Which of these is caused by the interaction between the atmosphere and the hydrosphere? Brian planted 6 rows of tulip bulbs with 5 bulbs in each row. This is 3 times as many bulbs as Ester planted. How many bulbs did Ester plant? according the CDC , what percentage of e-cigarettes contain nicotine? Who is the father of physics? This summer Paiges town will be hosting a series of 9 concerts. There are two types of seats at the concerts, which are priced at $29.50 and $43.00. Paige would like to attend at least 5 concerts and spend no more than $200. If x and y represent the number of tickets Paige purchased for the 2 types of seats, which system of inequalities could Paige use to model this situation? Translate the following word phrase into an algebraic expression: nine times the difference of 5 and y. Joan has $5,000 in her savings account.She takes out $200 per week. In howmany weeks will it take Joan to depleteher savings account? Explain why this is not a function Dr.Lopez a veterinarian carefully controls the type and amount of antibiotics he uses for treating food animals. Why is this practically ethically responsible Many Americans listen to music through headphones while walking in public.strong claim or weak the disease erythroblastosis fetalis (also called hemolytic disease of the newborn) develops in a fetus or a newborn infant with Rh-positive blood and an Rh-negative mother. Symptoms results when maternal anti-Rh antibodies cross the placenta and interact with the fetus' erythrocytes. Why are the children of Rh-positive mothers not ay risk for this disease when you have an equation the the result of multiple property's, can all the property's be in one equation? SOMEONE PLEASE HELP ME QUESTION 5 2 PARTS IN THE PICTURE!!!!! The European Starling is an invasive species of songbird found here in the United States. The growing population of starlings has caused displacement of Eastern Bluebird from their normal nesting sites. This is an example ofinterspecific competition.intraspecific competition.resource partitioning.commensalism. Using Linear Pairs to Find an Unknown ValueWhat is the value of x?SEE03045(3x)5570RO 60W Solve and show your work. Plz :) The Square Root of a whole number is Always, Sometimes or Never a rationalnumber? *AlwaysSometimes Never What is the purpose of a graffiti piece? When is it art or when is it vandalism?