Answer:
the median i think it is 6.5
28.The chemical formula of a compound indicates
the source of the elements in the compound.
b. how elements are joined in the compound.
the alchemy symbols for the elements in the compound.
d. the relative proportions of the elements in the compound.
Answer:
d. the relative proportions of the elements in the compound.
Explanation:
The chemical formula of a compound indicates the relative proportions of the element in the compound.
The chemical formula of a compound is a representation which shows all the elements therein and the mole relationship between them expressed as subscripts. For example HCl, contains one mole of hydrogen and 1 mole of Cl.Aluminum hydroxide reacts with sulfuric acid as follows: 2Al(OH)3+3H2SO4âAl2(SO4)3+6H2O.Which reagent is the limiting reactant when 0.550 mol Al(OH)3 and 0.550 mol H2SO4 are allowed to react?How many moles of Al2(SO4)3 can form under these conditions?
How many moles of the excess reactant remain after the completion of the reaction?
Answer:
Explanation:
2Al(OH)₃ + 3H₂SO₄ = Al₂(SO₄)₃ + 6H₂O
2 moles 3 moles
2 moles of Al(OH)₃ reacts with 3 moles of H₂SO₄
.55 moles of Al(OH)₃ reacts with .55 x 1.5 moles of H₂SO₄
moles of H₂SO₄ required = .825 moles
moles available = .55 moles , so H₂SO₄ is the limiting reagent .
3 moles of H₂SO₄ yields 1 moles of Al₂(SO₄)₃
.55 moles of H₂SO₄ yields 1 x .55 / 3 moles of Al₂(SO₄)₃
Al₂(SO₄)₃ produced = 1 x .55 / 3 moles = .1833 moles .
Al(OH)₃ reacted = 2 x .55 / 3 = .367 moles
excess Al(OH)₃ remaining = .5 - .367
= .133 moles .
Determine if a homogeneous solution forms when each pair of substances is mixed Check all that apply . CCL 4 H 2 O Br 2 and CCl 4 CH 3 CH 2 OH and H 2 O
Answer:
Explanation:
bc
Calculate the number of moles of MgF2 that dissolved.
Moles of MgF₂ : 1.2 x 10⁻⁴
Further explanationMaybe the complete question is like this
A student prepares 100. mL of a saturated solution of MgF2 by adding 0.50 g of solid MgF2 to 100. mL of distilled water at 25°C and stirring until no more solid dissolves. (Assume that the volume of the undissolved MgF2 is negligibly small.) The saturated solution is analyzed, and it is determined that [F−] in the solution is 2.4 × 10−3 M.
The dissociation reaction of MgF₂
MgF₂(s)⇒ Mg²⁺(aq)+2F⁻(aq)
mol ratio MgF₂ : F⁻ = 1 : 2
mol of F⁻ in 100 ml solution :
[tex]\tt mol=M\times V\\\\mol=2.4\times 10^{-3}\times 0.1=2.4\times 10^{-4}[/tex]
mol MgF₂ :
[tex]\tt \dfrac{1}{2}\times 2.4\times 10^{-4}= 1.2\times 10^{-4}[/tex]
Calculate the new pressure of a gas if the gas at 50 ˚C and 81.0 kPa is heated to 100 ˚C at a constant volume.
Answer:
93.5 kPa
Explanation:
Step 1: Given data
Initial pressure (P₁): 81.0 kPaInitial temperature (T₁): 50 °CFinal pressure (P₂): ?Final volume (T₂): 100 °CStep 2: Convert the temperatures to the Kelvin scale
When working with gases, we need to consider the absolute temperature. We will convert from Celsius to Kelvin using the following expression.
K = °C + 273.15
T₁: K = 50°C + 273.15 = 323 K
T₂: K = 100°C + 275.15 = 373 K
Step 3: Calculate the final pressure of the gas
At a constant volume, we can calculate the final pressure of the gas using Gay-Lussac's law.
P₁/T₁ = P₂/T₂
P₂ = P₁ × T₂/T₁
P₂ = 81.0 kPa × 373 K/323 K
P₂ = 93.5 kPa
Hydrochloric acid is widely used as a laboratory reagent, in refining ore for the production of tin and tantalum, and as a catalyst in organic reactions. Calculate the number of moles of HCI in 62.85 mL of 0.453 M hydrochloric acid.
1) 28.5 mol
2) 1.04 mol
3) 0.139 mol
4) 0.0285 mol
5) 0.00721 mol
Answer:
Option 4
Explanation:
Hydrochloric acid is a strong one, that gives protons to medium. It can be dissociated as this:
HCl → H⁺ + Cl⁻
M means Molarity. It is a sort of concentration that indicates the moles of solute in 1L of solution.
M = moles / volume (L)
We can also say M = mmoles / mL of solution
M . mL = mmoles
0.453 M . 62.85mL = 28.5 mmoles
If we divide by 1000 → 28.5 mmol . 1 mol / 1000 mmol = 0.0285
What volume of a 0.181 M nitric acid solution is required to neutralize 25.1 mL of a 0.167 M calcium hydroxide solution
Answer:
46.32 mL
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2HNO₃ + Ca(OH)₂ —> Ca(NO₃)₂ + 2H₂O
From the balanced equation above,
The following data were obtained:
Mole ratio of the acid, HNO₃ (nA) = 2
Mole ratio of the base, Ca(OH)₂ (nB) = 1
Next, we shall write out the data obtained from the question. This includes:
Molarity of the acid, HNO₃ (Ma) = 0.181 M
Volume of the base, Ca(OH)₂ (Vb) = 25.1 mL
Molarity of the base, Ca(OH)₂ (Mb) = 0.167 M
Volume of the acid, HNO₃ (Va) =?
Finally, we shall determine the volume of the acid, HNO₃ as shown below:
MaVa/ MbVb = nA/nB
0.181 × Va / 0.167 × 25.1 = 2/1
0.181 × Va / 4.1917 = 2
Cross multiply
0.181 × Va = 4.1917 × 2
0.181 × Va = 8.3834
Divide both side by 0.181
Va = 8.3834 / 0.181
Va = 46.32 mL
Therefore, the nitric acid, HNO₃ required for the reaction is 46.32 mL
Everything in outer space including stars, planets, and galaxies
O A. Solar System
B. Universe
OC. Galaxy
D. Biosphere
I
Answer:
Universe.
Explanation:
Biosphere is just a planet. Solar system contains planets and star. Galaxy holds multiple solar systems only. Universe hold everything, biospheres, solar systems, and galaxies. I hope this helps :D
Answer:
B.
Explanation:
A solar system is IN a galaxy. Its not A.
A Galaxy doesnt have other galaxies in it. Its not c
A biosphere is only referring to earth. its not D.
Therefore, it is B. A universe is everything in outer space including stars, planets, and galaxies.
Help me I’ll do anything
Answer:
its not A B or C soo choose D *This is what i think*
Answer:
A) something that causes physical pain
hope this helps
Explanation:
You witnessed a slide breaking while someone is using a microscope.The silde was not dropped.You are tasked with finding out why the slide broke.Explain
Answer:
See the answer below
Explanation:
The slide could have broken due to the ramming of the objective (especially the high power objectives) into the slide on the stage of the microscope while trying to bring the object on the slide into focus.
It is recommended to start with the lowest objective while trying to focus a slide. Thereafter, the next higher objective can be switched to and the image brought into focus once again. This can be repeated until the desired magnification of the image is reached.
However, at higher objective powers, the coarse adjustment knob should be avoided to avoid the objectives touching/breaking the slide. Instead, the fine adjustment knob should be used.
Hence, the breaking of the slide in the illustration could have been due to the use of the coarse adjustment knob at higher objective powers and the ramming of the objective into the slide.
Convert 85.02g to mg (1 mg=10^-3g)
Answer:
85,020 milligrams
Explanation:
Multiply the mass value by 1,000
A sample of poisonous carbon monoxide gas, CO, contains 2.50 g carbon and 3.33 g oxygen. The
unknown gas X is analyzed and it is determined to be made of 0.75 g carbon and 2.00 g oxygen. Are
these data an example of the law of definite proportions, the law of multiple proportions, or neither?
What does the data tell you about the identity of gas X?
Answer:
Explanation:
In carbon monoxide ,
2.5 g of carbon reacts with 3.33 g of oxygen
In unknown gas X ,
.75 g of carbon reacts with 2 .00 g of oxygen
2.5 g of carbon will react with 6.66 g of oxygen in X gas .
Ratio of oxygen in two compounds , reacting with same mass of carbon
= 3.33 : 6.66
= 1 : 2 , a simple ratio
It follows law of multiple proportions .
First gas is CO or carbon monoxide
X gas is CO₂ or carbon dioxide .
In this gas , ratio of oxygen reacting with same amount of carbon is doubled .
How many moles is 3.01 x 10 24 molecules of oxygen ( g)?
Answer:
5.00 moles O₂
General Formulas and Concepts:
Chemistry - Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
3.01 × 10²⁴ molecules O₂
Step 2: Convert
[tex]3.01 \cdot 10^{24} \ mc \ O_2(\frac{1 \ mol \ O_2}{6.022 \cdot 10^{23} \ mc \ O_2} )[/tex] = 4.99834 moles O₂
Step 3: Check
We are given 3 sig figs. Follow sig fig rules and round.
4.99834 moles O₂ ≈ 5.00 moles O₂
Which is NOT an agent of chemical weathering?
A. water
C. carbon dioxide
B. oxygen
D. wind
Answer:
water is a water, but is also known as water. water means water, and the synonym of water is water, and antonym of water is non-water. water is located in earth. water's friends are pure water, salt water, dirty water and ice water. water's best friend is pure water, because when water gives water to pure water, pure water uses the water and gives back the water to the water.
thank you for enjoying my story
Explanation:
The enthalpy change of reaction 1 is -114 kJ mol-1
reaction 1
2NaOH(aq) + H2SO4(aq)
→ Na2SO4(aq) + 2H2O(1)
By using this information, what is the most likely value for the enthalpy change of reaction 2?
reaction 2
Ba(OH)2(aq) + 2HCl(aq) → BaCl2(aq) + 2H2O(1)
Answer:
-114kJ mol-1
Explanation:
Definition of the enthalpy change of neutralization: the energy released with the formation of 1 mole of water when neutralization takes place between an acid and a base.
Since both reactions yield the same number of moles of water, the answer should be -114kJ mol-1.
The statement for the enthalpy change of reaction 2 is "-114 kJ"
What is enthalpy change?The change in enthalpy (ΔH) is a quantity of heat of a system. The enthalpy change is the amount of heat that enters or exits a system during a reaction.
One equivalent of hydrogen ions is neutralised with one equivalent of hydroxide ions in the reaction 1,
NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
The change in enthalpy is given as -114 kJ.
Two equivalents of hydrogen ions are neutralised with two equivalents of hydroxide ions in the reaction 2,
Ba(OH)2 + H2SO4 (aq) → BaSO4 (s) + 2H2O (l)
But, that primary ionic reaction is same for both the reaction in which hydrogen ion combines with hydroxide ion to generate a water molecule. So, the enthalpy change of reaction 1 would be exactly same as for reaction 2.
The neutralization enthalpy comes out to be -114 kJ.
Hence the correct answer is -114 kJ.
Learn more about enthalpy change here
https://brainly.com/question/4526346
#SPJ2
At 298 K and 1 atm which noble gas has the lowest density? Why?
1) Ne
2) Kr
3) Xe
4) Rn
Answer:
Ne
Explanation:
It has the lowest density.
Neon has the lowest density since it has the smallest atomic size and the lowest atomic number.
At a standard temperature of 298K and a pressure of 1 atm;The atomic density of an element refers to the number of atoms contained in an element per unit volume.
The size of an atom has an effect on atomic density. The size of an atom increases from left to right across the period and top to bottom down the group.
As such, on the periodic table, as we move from top to bottom down the group, the density of an atom increases.
The atomic element of the given elements are:
Neon (Ne) = 10Krypton (Kr) = 36Xenon (Xe) = 54Radon (Rn) = 36Therefore, we can conclude that Neon (Ne) will have the lowest density since it has the smallest atomic size and the lowest atomic number.
Learn more about the Periodic table here:
https://brainly.com/question/11155928?referrer=searchResults
Brad pushed a shopping cart directly toward his car at a constant velocity for 6.0 seconds.
During that time, Brad's daughter jogged past him at 2.4 meters per second, and the cart
moved 6.6 meters. What was the cart's velocity?
Answer:
Watch Naruto that's the answer
Explanation:
Theodor Schwann was a German scientist who wanted to understand how different types of cells worked and performed functions in different tissues. He was one of the first to theorize that all living things are made up of cells.
Rudolf Virchow was a German doctor who wanted to discover the origin of diseases. He accepted the idea that all living things are made up of cells and extended the idea to theorize that many diseases are the result of bacterial cells infecting the body.
The example described above suggests that
A.
scientific discoveries are never made by doctors.
B.
scientists always have the same goals when making related discoveries.
C.
German scientists were the first to disprove cell theory.
D.
people with different goals can make contributions to scientific knowledge.
D. People with different goals can make contributions to scientific knowledge
Both Schwann and Virchow had different thoughts and ideas. Schwann wanted to understand how cells worked - Virchow wanted to know the origin of diseases. Different goals.
Answer:
D
Explanation:
I got it right on studyisland
How many moles of H are present in 3 moles of carbon trihydride?
Answer:
4moles of carbon trihydride
WILL MARK BRAINLIEST:
Identify the dichotomous key: plz answer:::: Each of these aliens belongs to the same genus. What is their genus?
Answer:
Alienus
Explanation:
THIS QUESTION IS HARD BUT I NEED HELP AND ITS DUE IN 20 MINS. YOU HAVE TO ANSWER A AND B FOR EVERYTHING TO BE CORRECT. I KNOW YALL ARE SMART PLSS HELP. THANKS!!
When a metal reacts with hydrogen carbon dioxide gas is produced? True or False
Answer:
false
Explanation:
"When a metal reacts with hydrogen carbon dioxide gas is produced" statement is false.
What is a chemical equation?A chemical reaction is a representation of symbols of the elements to indicate the amount of substance and moles of reactant and product.
Generally, metals do not react with hydrogen. But some metals like sodium, potassium, calcium and magnesium force the hydrogen atom to accept the electrons given by these elements and form salt-like ionic solid compounds called metal hydrides.
Learn more about chemical equations here:
brainly.com/question/20492533
#SPJ2
Which macro nutrient is made up of carbon and hydrogen elements join together in long groups called hydrocarbons?
Answer:
organic molecules made up of carbon and hydrogen elements joined together in long groups called hydrocarbons. The arrangement of these hydrocarbon chains, and their interaction with each other, determines fat type.
The study of chemicals and their bond is called chemistry.
The correct answer is lipid.
Those molecules which are present in the cell more than the amount of 800 daltons are called macromolecules.
According to the question, the correct answer is lipid because in lipid all the molecules are made up of a long chain of carbon and hydrogen join together.
For example, palmitic is made up of 16 carbon compounds.
Hence, the correct answer is lipid.
For more information, refer to the link:-
https://brainly.com/question/25305623
Alcohol is a
Depressant
Muscle relaxer
Both
Alcohol is both a Depressant and a Muscle Relaxer. Therefore the answer would be both!
Hope this helps :)
A 11.1-g sample of granite initially at 76.0°C is immersed into 22.0 g of water initially at 22.0°C. What is the final temperature of both substances when they reach thermal equilibrium? (For water, Cs=4.18J/g⋅∘C and for granite, Cs=0.790J/g⋅∘C.)
Answer:
[tex]T_f=26.7\°C[/tex]
Explanation:
Hello.
In this case, when two substances at different temperature are placed in contact in an isolated container, we can say that the heat lost by the hot substance is gained by the cold substance. In such a way, since granite is at 76.0 °C and water at 22.0 °C we infer granite is hot and water is cold, so we write:
[tex]Q_{granite}=-Q_{water}[/tex]
In terms of mass, specific heat and change in temperature, we write:
[tex]m_{granite}C_{granite}(T_f-T_{granite})=-m_{water}C_{water}(T_f-T_{water})[/tex]
Thus, since the temperature is the same for both substance, we can solve for it as shown below:
[tex]T_f=\frac{m_{granite}C_{granite}T_{granite}+m_{water}C_{water}T_{water}}{m_{granite}C_{granite}+m_{water}C_{water}}[/tex]
By plugging in each variable, we obtain:
[tex]T_f=\frac{11.1g*0.790\frac{J}{g\°C} *76.0\°C+22.0g*4.18\frac{J}{g\°C} *22.0\°C}{11.1g*0.790\frac{J}{g\°C} +22.0g*4.18\frac{J}{g\°C}}\\\\T_f=26.7\°C[/tex]
Best regards!
Radiation that travels across distances in
the form of waves is which of the
following?
A. matter
B. a cell
C. a vacuum
D. energy
Answer:
i think the answer is D. energy
Explanation:
find the volume of a gas at standard pressure if its volume at 1.9 atm is 80 ml?
given:
formula:
substitution:
answer:
Answer:
1.5 × 10² mL
Explanation:
Step 1: Given data
Initial pressure of the gas (P₁): 1.9 atmInitial volume of the gas (V₁): 80 mLFinal pressure of the gas (P₂): 1.0 atm (standard pressure)Final volume of the gas (V₂): ?Step 2: Calculate the final volume of the gas
For an ideal gas, we can calculate the final volume of the gas using Boyle's law.
P₁ × V₁ = P₂ × V₂
V₂ = P₁ × V₁/P₂
V₂ = 1.9 atm × 80 mL/1.0 atm
V₂ = 1.5 × 10² mL
Since the pressure decreased, the volume of the gas increased.
an 11.5g sample of ethonal 6.00g of Carbon 1.51g of hydrogen what is the percent composition of each element
C : 52.2%, H : 13.1%, O:34.7%
Further explanationThe empirical formula is the smallest comparison of atoms of compound forming elements.
A molecular formula is a formula that shows the number of atomic elements that make up a compound.
(empirical formula) n = molecular formula
11.5 g of Ethanol-C₂H₅OH contains 6.00 g of Carbon and 1.51 g of Hydrogen.
mass of Oxygen :
[tex]\tt 11.5-(6+1.51)=4~g[/tex]
Percent composition :
C[tex]\tt \dfrac{6}{11.5}\times 100\%=52.2\%[/tex]
H[tex]\tt \dfrac{1.51}{11.5}\times 100\%=13.1\%[/tex]
O[tex]\tt \dfrac{4}{11.5}\times 100\5=34.7\%[/tex]
A student measures the length of two pieces of paper as 8.21 in
and 8.0 in. What is the total length? Be sure to use sig. figs. in
your answer. Do not include the unit.
Answer: 16.21
Explanation:
A student measures the length of two pieces of paper as 8.21 in and 8.0 in. the total length is 16.21 with 4 significant figures.
What are significant figures?
The significant figures or digits are the form of scientific methd which represent the digit from zero to nine and use when the value is uncertain where starting zeros are not significant and decimal is also not a significant figure.
In the given value the total is 16.21 with 4 significant figures with it has 4 significant digits and the decimal with it is not significant after adding from which the respective value is here.
Therefore, with 4 significant figures where the student measures the length of two pieces of paper as 8.21 in and 8.0 in. the total length is 16.21.
Learn more about significant figures, here:
https://brainly.com/question/14804345
#SPJ2
sodium hydroxide is extremely soluble in water. a saturated solution contains 678.57 grams of sodium hydroxide 1.00 liter of solution. calculate the molarity of a saturated sodium hydroxide solution.
Answer:
M = 17 M
Explanation:
Given data:
Mass of sodium hydroxide = 678.57 g
Volume of solution = 1.00 L
Molarity of solution = ?
Solution:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
Number of moles of sodium hydroxide:
Number of moles = mass/molar mass
Number of moles = 678.57 g /40 g/mol
Number of moles = 17 mol
Molarity:
M = 17 mol/1.00 L
M = 17 mol/L
M = 17 M