Can you help me with this question please

Can You Help Me With This Question Please

Answers

Answer 1

Answer:

9.6 Ω

Explanation:

Notice that this circuit is the same as the one shown in the attached image.

Then we calculate the parallel of R1 and R3 first:

Since R1 = 30 Ω and R2 = 20 Ω, the parallel equivalent of this is 12 Ω and this in series with R5 (4 Ω) is 16 Ω.

Now we calculate the parallel circuit of the three resistors

40 Ω, 60 Ω, and 16 Ω, which gives us: 9.6 Ω

Can You Help Me With This Question Please

Related Questions

carter found the rock shown in the picture below near a river ​

Answers

Answer:

there's no picture

Explanation:

and what would the question be anyways?

Answer:

what is the question

Explanation:

things that affects the demand for electricity

Answers

New inventions like :
Solar panel
Wind mill
And etc .

At which temperature are the particles in a pencil moving faster: 20°C or 50°C?

Answers

Answer:

movement generates energy=heat so 50c should be it

What type of numbers in a measurement are always significant?

Answers

Answer:

Non-zero digits

Explanation:

umm (ꏿ﹏ꏿ;)

Answer:

There's three rules on determining how many important quantities are in a number: Non-zero digits are always predominant. Any zeros between two significant digits are always major. The final zero or dangling zeros in the decimal segment are really only important.

I hope this answered your question, have a nice day!

1500 POINTS TO WHOEVER ANSWERS THIS FIRST!!!!!!!!!!

1. You drop a bowling ball 15m from the top of the science building. What is its
velocity as it impacts the ground?

2. A cheetah accelerates from 0 to 13m/s in 3 seconds. How far does it travel
during that time?

3. Your foolish friend shoots a bullet straight in the air at a muzzle velocity of
380 m/s. How high does the bullet go (neglecting air resistance)?

4. Your foolish friend shoots a bullet straight in the air at a muzzle velocity of
380 m/s. What is the bullets velocity when it falls back down and hits your
friend?

Answers

Answer: Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s.

Explanation:

What is the density of the paint if the mass of a tin containing 5000 cm3 paint is 7 kg. If the mass of the empty tin, including the lid is 0.5 kg.​

Answers

We are given:

Mass of the Paint bucket (with paint) = 7000 grams

Mass of the paint bucket (without paint) = 500 grams

Volume of Paint in the Bucket = 5000 cm³

Mass of Paint in the Bucket:

To get the mass of the paint in the bucket, we will subtract the mass of the bucket from the mass of the paint bucket (with paint)

Mass of Paint = Mass of Paint bucket (with paint) - Mass of the paint Bucket (without paint)

Mass of Paint = 7000 - 500

Mass of Paint = 6500 grams

Density of the Paint:

We know that density = Mass / Volume

Density of Paint  = Mass of Paint / Volume occupied by Paint

Density of Paint = 6500/5000

Density of Paint = 1.3 grams / cm³

Based on the measured force between objects that are 10 meters apart, how can you find the force between objects that are any distance apart ?

Answers

Answer:

F' = 100 F/r²

Explanation:

The gravitational force of attraction between two objects is given by the Newton's Gravitational Formula. The Newton's Gravitational Formula is as follows:

F = Gm₁m₂/r²

where,

F = Force between objects

G = Universal Gravitational Constant

m₁ = mass of first object

m₂ = mass of second object

r = distance between objects = 10 m

Therefore,

F = Gm₁m₂/10²

Gm₁m₂ = 100F   --------------------- equation (1)

Now, we consider these objects at any distance r apart. So, the force becomes:

F' = Gm₁m₂/r²

using equation (1), we get:

F' = 100 F/r²

So, if the force (F) between objects 10 m apart is known, we can find it at any distance from the above formula.

The force between objects that are any distance apart is expressed as [tex]P'=\frac{100P}{r^2}[/tex]

According to the gravitational law, the force acting on an object is directly proportional to the product of their masses and inversely proportional to the square of their distance apart. Mathematically,

[tex]P=\frac{GMm}{r^2}[/tex]

M and m are the masses

r is the distance between the masses

If the force between objects that are 10 meters apart, hence;

[tex]P=\frac{GMm}{10^2}\\P=\frac{GMm}{100}\\GMm = 100P[/tex]

To find the force between objects that are any distance apart, we will use the same formula above to have;

[tex]P'=\frac{GMm}{r^2}\\[/tex]

Substitute the result above into the expression to have:

[tex]P'=\frac{100P}{r^2}[/tex]

Hence the force between objects that are any distance apart is expressed as [tex]P'=\frac{100P}{r^2}[/tex]

Learn more on gravitational law here: https://brainly.com/question/11760568

A steam catapult applies a very large force to supplement the engine thrust of a jet fighter as it takes off from an
aircraft carrier. The jet has a mass of 4000 kg and must reach its take off speed of 70 m/s at the end of the 220
m flight deck. What is the combined force of the catapult and engines? (Use the work-energy theorem)

Answers

Answer:

The combined force of the catapult and engines is 44545.455 newtons.

Explanation:

Let suppose that platform of the aircraft carrier is horizontal, such that changes in gravitational potential energy can be neglected. In addition, effects of non-conservative forces are neglected. By using Principle of Energy Conservation and Work-Energy Theorem we find that steam catapult-jet aircraft is represented by:

[tex]K_{1}+W_{1\rightarrow 2} = K_{2}[/tex] (1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final translational kinetic energies of the jet fighter, measured in joules.

[tex]W_{1\rightarrow 2}[/tex] - Work done on the jet fighter due to the combined force of the catapult and engines, measured in joules.

By applying definitions of translational kinetic energy and work, we expand and simplify the equation above as follows:

[tex]F\cdot \Delta s = \frac{1}{2}\cdot m\cdot (v_{2}^{2}-v_{1}^{2})[/tex]

[tex]F = \frac{m\cdot (v_{2}^{2}-v_{1}^{2})}{2\cdot \Delta s}[/tex] (2)

Where:

[tex]F[/tex] - Combined force of the catapult and engines, measured in newtons.

[tex]m[/tex] - Mass of the jet fighter, measured in kilograms.

[tex]\Delta s[/tex] - Length of the catapult, measured in meters.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final speeds of the jet aircraft, measured in meters per second.

If we know that [tex]m = 4000\,kg[/tex], [tex]v_{1} = 0\,\frac{m}{s}[/tex], [tex]v_{2} = 70\,\frac{m}{s}[/tex] and [tex]\Delta s = 220\,m[/tex], then the combined force of the catapult and engines is:

[tex]F = \frac{(4000\,kg)\cdot \left[\left(70\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (220\,m)}[/tex]

[tex]F = 44545.455\,N[/tex]

The combined force of the catapult and engines is 44545.455 newtons.

The combined force of the catapult and engines is 44,545.5 N.

The given parameters;

mass of the jet, = 4000 kgspeed of the jet, v = 70 m/slength of the deck, d = 220 m

The combined force of the catapult and engines is determined by applying work energy theorem as shown below;

[tex]W = \Delta E\\\\Fd = \frac{1}{2}m(v^2 -u^2) \\\\220F = \frac{1}{2}(4000)(70^2 - 0^2) \ \\\\220 F = 9,800,000\\\\F = \frac{9,800,000}{220} \\\\F = 44,545.5 \ N[/tex]

Thus, the combined force of the catapult and engines is 44,545.5 N.

Learn more here:https://brainly.com/question/10063455

Full moon is located______

a. farthest from the Sun

b. at a 90 degree angle with the Sun and Earth

c. closest to the Sun

Answers

Answer:

Im going to take an educated guess and say its B.

Explanation:

A Full moon is located farthest from the Sun. Thus, the correct option for this question is A.

What is a Full moon?

A full moon may be defined as one of the types of lunar phases when the Moon significantly appears fully illuminated from Earth's perspective. This event typically occurred when Earth is located between the Sun and the Moon.

When the earth is located between the sum and the moon, it is the time when the moon is located farthest from the sun. And it directs to an event of a full moon. The average time duration of the full moon and the repetition of the same phase normally requires 29.53 days.

Therefore, the Full moon is located farthest from the Sun. Thus, the correct option for this question is A.

To learn more about the Full moon, refer to the link:

https://brainly.com/question/15032553

#SPJ2

pls answer this
quick as possible

Answers

Answer:

The answer is the 4th one

Explanation:

Good luck man

Calculate the velocity of an object moved around a circle with a radius of 1.65 m and an
acceleration of 3.5 m/s2.

Answers

Answer:

2.4m

Explanation:

Given parameters:

Radius of circle  = 1.65m

Acceleration  = 3.5m/s²

Unknown:

Velocity of the object = ?

Solution:

To solve this problem, we have to apply the formula of centripetal acceleration;

   Centripetal acceleration  = [tex]\frac{v^{2} }{r}[/tex]  

v is the velocity

r is the radius

   v² = centripetal acceleration x radius

 Insert parameters and solve;

     v² = 3.5 x 1.65

     v  = √5.775  = 2.4m

The velocity of the object as it moves around a circle with the given radius and acceleration is 2.4m/s.

Given the data in the question;

Radius; [tex]r = 1.65m[/tex]Centripetal acceleration; [tex]a_c = 3.5m/s^2[/tex]

Velocity; [tex]v = \ ?[/tex]

From the centripetal force equation, we use the expression for centripetal acceleration:

[tex]a_c = \frac{v^2}{r}[/tex]

Where [tex]a_c[/tex] is the centripetal acceleration, v is the velocity and r is radius.

We substitute our given values into the equation

[tex]3.5m/s^2 = \frac{v^2}{1.65m} \\\\v^2 = 3.5m/s^2\ *\ 1.65m\\\\v^2 = 5.775m^2/s^2\\\\v = \sqrt{5.775m^2/s^2} \\\\v = 2.4m/s[/tex]

Therefore, the velocity of the object as it moves around a circle with the given radius and acceleration is 2.4m/s.

Learn more: https://brainly.com/question/17689540

A current of 15 Amps flows through a circuit with a resistance of 0.10 Ohms. What is the voltage?
A. 0.006 Volts
OB. 1.5 Volts
O C. 15 Volts
D. 150 Volts

Answers

Voltage = (current) x (resistance) (Ohm's law)

Voltage = (15 A) x (0.10 ohm)

Voltage =  1.5 volts (B)

What holds the metal ions together in a lattice?
A. covalent bonds
B. metallic bonds
C. hydrogen bonds
D. ionic bonds

Answers

Metallic bonds! Hope this helps!! :))

Answer:

B. Metallic bonds.

HELP PLEASE I need to finish this asap

Answers

Answer:

I'm not 100% sure, but I think the answer would be the first one because there's a force pushing the object in every direction, so they would cancel eachother out and make the object stay in the same place.

Explanation:

pls vote brainliest

Third one bro I know this already

QUESTION 13
Marci would describe almost a perfect person whenever her friends would ask her who she thought was
her ideal life partner. This "perfect" person would be ain)
O a prototype
b.reinforcer
oc. anagram
d. heuristic

Answers

The answer is d.heuristic

What is the magnitude of the tangential acceleration of a bug on the rim of a 13.0-in.-diameter disk if the disk accelerates uniformly from rest to an angular speed of 79.0 rev/min in 3.80 s

Answers

Answer:

The correct solution will be "12.48 in/s²".

Explanation:

The given values are:

Angular speed

= 79.0 rev/min

Time

= 3.80 seconds

Now,

⇒  [tex]Angular \ acc.=\frac{(\frac{79\times 2\times \pi}{60})}{3.8}[/tex]

                          [tex]=\frac{8.2}{3.8}[/tex]

                          [tex]=2.1 \ rad/s^2[/tex]

Tangential acceleration will be:

= [tex]Angular acc.\times radius[/tex]

= [tex]2.1\times 6.5\times 0.0254[/tex]

= [tex]0.3467 \ m/s^2[/tex]

= [tex]12.48 \ in/s^2[/tex]

A solid keeps its shape due to which of the following factors?

Space between particles
Attractive forces between particles
The type of element in the solid
The container it is placed in

Answers

Answer:

c

Explanation:

because whatever elements are used like gas uses water evaporation so yeah

Hey Emma Here! ✞

Answer:

(A) Space between particles!

Explanation:

Solids can hold their shape because their molecules are tightly packed together!

Bye Have A Nice Day! ✞

Does electric and magnetic objects both have north and south poles

Answers

Explanation:

hope this answer was helpful

A batter hits a foul ball. The 0.140-kg baseball that was approaching him at 40.0 m/s leaves the bat at 30.0 m/s in a direction perpendicular to the line between the batter and the pitcher. What is the magnitude of the impulse delivered to the baseball?
A) 9.80 Ns
B) 3.50 Ns
C) 7.00 Ns
D) 5.60 Ns
E) 1.40 Ns

Answers

Answer:

The magnitude of the impulse delivered to the baseball is 7.0 Ns

Explanation:

Given;

mass of the foul ball, m = 0.14 kg

initial velocity, u = 40 m/s

final velocity, v = 30 m/s in perpendicular direction

Impulse is given as change in momentum;

initial momentum in horizontal direction, Pi = mu

Pi = 0.14 x 40 = 5.6 Ns

final momentum in perpendicular direction, Pf = mv

Pf = 0.14 x 30

Pf = 4.2 Ns

The resultant impulse is given by;

J² = 5.6² + 4.2²

J² = 49

J = √49

J = 7.0 Ns

Therefore, the magnitude of the impulse delivered to the baseball is 7.0 Ns

Explain the "war of the currents"

Answers

Answer:

the war of currents is

Explanation:

The war of currents was a series of events surrounding the introduction of competing electric power transmission systems in the late 1880s and early 1890s.

Answer:

a series of events surrounding the introduction of competing electric power transmission systems in the late 1880s and early 1890s

Explanation:

What is the momentum of a 8850 kg medium truck that is traveling with a velocity of 55 m/s west on the highway

Answers

Answer:

486,750 kg*m/s

Explanation:

Momentum is mass*velocity

M = m*v

M = 8850kg*55m/s

M = 486,750 kg*m/s

The momentum of an 8850 kg medium truck that is traveling with a velocity of 55 m/s west on the highway is 486750 kg m / s.

What is momentum?

Momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both magnitude and direction. According to Isaac Newton's second equation of motion, the force acting on the particle equals the time rate of change of momentum.

According to Newton's second law, if a particle is subjected to a constant force for a specific amount of time, the result of the force and time (referred to as the impulse) is equal to the change in momentum.

Given:

The mass of the truck is, m = 8850 kg,

The velocity of the truck is, v = 55 m/s,

Calculate the momentum of the truck as shown below,

Momentum = m × v

Momentum = 8850 × 55

Momentum = 486750 kg m / s

Thus, the Momentum of the truck is 486750 kg m / s.

To know more about momentum:

https://brainly.com/question/904448

#SPJ2

During the slowing down process, there is a time when the angular speed is 0.5 rev/s. The fan arm is 0.8 m long. What is the speed of a point on the end of the fan arm at this time

Answers

Answer:

2.51 m/s

Explanation:

Given that,

Angular speed of a fan, [tex]\omega=0.5\ rev/s = 3.14\ rad/s[/tex]

Length of the fan arm, r = 0.8 m

We need to find the speed of a point on the end of the fan arm at this time. Let v is the speed. It is given in terms of angular speed is given by :

[tex]v=r\omega\\\\v=0.8\times 3.14\\\\v=2.51\ m/s[/tex]

So, the required speed is 2.51 m/s.

A 16-V battery powers a series circuit that contains two lightbulbs The
voltage across the first lightbulb is 12-V​

Answers

Complete question:

A 16-V battery powers a series circuit that contains two lightbulbs. The voltage across the first lightbulb is 12-V.

a. What fractional part of the circuit's total energy is transformed in the first lightbulb? Simply your answer.

b. What fractional part of the circuit's total energy is transformed in the second lightbulb? Simply your answer.

Answer:

(a) Fraction of energy of the first bulb in the total energy of circuit is 3/4

(b) Fraction of energy of the second bulb in the total energy of circuit is 1/4

Explanation:

Given;

total voltage across the series circuit, [tex]V_T[/tex] = 16 V

voltage across the first light bulb, V₁ = 12 V

The voltage across the second light bulb is given by;

V₂ = [tex]V_T[/tex] - V₁

V₂ = 16 V - 12 V

V₂ = 4 V

The total power across the circuit is given by;

P = I[tex]V_T[/tex]

P = 16I

Where;

I is the constant current in the circuit

(a)

power in the first light bulb is given by;

P₁ = 12I

Fraction of this power in the total energy of circuit is given by;

[tex]\frac{P_1}{P} = \frac{12I}{16I} = \frac{3}{4}[/tex]

(b)

power in the second light bulb is given by;

P₂ = 4I

Fraction of this power in the total energy of circuit is given by;

[tex]\frac{P_2}{P} = \frac{4I}{16I} = \frac{1}{4}[/tex]

A car starts from rest and reaches a velocity of 30 m/s in 10 s. If the car
has a mass of 1500 kg, what net force is exerted upon the car?

Answers

Answer:

f= ma

Explanation:

v-u/ t

30-0/10

3m/s

maas 1500

1500*3

4500

Which describes an image that a concave mirror can make?

A. The image is always virtual.
B. The image can be either virtual or real.
C. The image is never upside down.
D. The image can only be the same size as the object.

Answers

Answer:

A

Explanation:

The image formed by the concave mirror is always virtual. An enlarged image is caused when the concave mirror is positioned too near to the object.

What is a concave mirror?

When a hollow spherical is divided into pieces and the exterior surface of each cut portion is painted, it forms a mirror, with the inner surface reflecting the light.

A concave mirror is a name for this sort of mirror. An enlarged and fake image is caused when the concave mirror is positioned too near to the object.

When the distance between the item and the mirror is increased, however, the size of the image decreases, and a true picture is generated.

The picture created by the concave mirror may be manipulated. The image formed by the concave mirror is always virtual.

Hence, option A is correct.

To learn more about the concave mirror, refer to the link;

https://brainly.com/question/25937699

#SPJ2

If the brakes are applied and the speed of the car is reduced to 13 m/s in 14 s, determine the constant deceleration of the car.Express your answer to three significant figures and include the appropriate units. Assume ais negative if it acts in the opposite sense to the positive velocity.

Answers

Answer:

Explanation:

v = u + at

v is final velocity , u is initial velocity , a is acceleration and t is time .

here v = 0 , u = 13 m /s , t = 14 s

putting the values

0 = 13 + 14 a

a = 13 / 14 m /s²

= - .9286

= -  0.929 m /s²

A water molecule is made up of one oxygen and two hydrogen atoms. Why is water considered a pure substance?

Answers

Answer:

A mixture is when two or more substances combine physically together.

However, in water, two hydrogen atoms combine with one oxygen atom chemically, forming a new substance that has properties different from hydrogen alone or oxygen alone.

Explanation:


Which of the following is NOT a correct statement?*
As the volume of a contained gas increases, the pressure in the container will
decrease.
As the temperature decreases, the kinetic energy of the particles decreases.
As pressure increases with a constant temperature, the volume decreases.
O As temperature increases, the kinetic energy of the particles decreases.

Answers

AnswerAmontons's law. If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. ... If the gas volume is decreased, the container wall area decreases and the molecule-wall collision frequency increases, both of which increase the pressure exerted by the gas (Figure 1).:

Explanation:

The Amazon rainforest has millions of trees down in South America. Pantanal, the largest wetland, or swamp, on Earth sits directly below the Amazon on a map. Explain this phenomenon using processes from the water cycle.

The subject is science just to let you know.

Answers

Answer:The Pantanal is, when the season changes of the river flow, the pantanal shrinks after a few river channels The amazon rainforest has a lot of trees.The vapor rises and condenses it into clouds.Water leaves the forest and comes back, the amazon leaves itself.If the amazon water was not to go by itself everything would be different.

Answer:

Nine, Brazil, Venezuela

Explanation:

Light travels fastest through which of the following?

A.
air

B.
glass

C.
vacuum

D.
water

Answers

ANSWER: the answer is C, vacuum
light travels fastest through a VACUUM .
Other Questions
Who is the narrator in "To Kill A Mockingbird" by Harper Lee Why were small states wary, or suspicious, of the Virginia Plan?Last question of the night(hopefully) National rebellions in Egypt and India were similar because This questions if for The Tell Tale Heart: The narrator claims to have several qualities that insane people don't have. Circle the qualities that he mentions. In your opinion, does having those qualities prove his sanity- or not? Please Help!!!! 1. There is a strong correlation between conflict and?settingtitlecomplex charactersresolution Mark and Dennis need 4 pounds of sassafras to make one barrel of rootbeer but they only have 1 pound. How much rootbeer can they make? which stimulate causes high energy emotional elation dehydration and damage serotonin producing neurons Which phrase has the most negative connotation? An abnormal result ? An typical result ? An unusual result ? What is the value today of receiving $5,000 at the end of six years, assuming an interest rate of 8% compounded semiannually? Please review the picture, asap! Thank you! Will mark Brainliest. The United States is not economically dependent on other countries for __________ because it specializes in producing them affordably.A.oil productsB.agricultural productsC.household goodsD.appliancesPlease select the best answer from the choices providedABCD What is 3:2/3? How many 2/3's are in 3? *0 41/39O2.0 4 1/2 The baileys spent $18.00 for 4 two-liters sodas for the birthday party this weekend. What is the number of soda bottles that could be bought for $45.00? What is the greatest common factor of 28 and 49 Estimate 55.8 (-3.1). Then find the quotient. Which massive upheaval was being referred to by the sepoys in Vishnubhatt Godse's account?Sepoy revolt of 1824Removal of the last Mughal king in 1856 Mutiny of 1857 Annexation of Awadh in 1856 I will give brainliest for first good answer! if any of you guys know someone named shurmpy or molly plz tell me they real good freinds to me What is the slope,m, of the table? What is the y-intercept,b, of the table?What is the equation that represents the table? I cant seem to understand this. Please, someone help :)