Can someone help me quickly?

A chemical property of isopropanol : D. Isopropanol is flammable.

There are changes that occur in the mater: physical changes and chemical changes

Classification uses the principle of the initial and final state of the substance.

Physical changes do not form new substances, so the properties of the particles remain the same.(size,volume,shape)

Example : boiling and freezing, just change its phase form from liquid to gas or from liquid to solid

Chemical changes/reaction form new substances(products) that are different from the initial substances(reactants)

Example : toxic, corroded

So :

mass, density, evaporation

highly flammable

Answer:

D. Isopropanol is flammable.

Explanation:

Mass, volume, temperature, phase of matter, color, texture, density, and hardness are all examples of physical properties. However, flammability is an example of a chemical property.

Chemical properties describe an object's potential to change its chemical composition. These properties depend on the types of atoms found in the object and the arrangement of those atoms (and their subatomic particles).

Answer:

nickel, cobalt would decrease in size when it became an iron

Answer:

In physics, a force is any interaction that, when unopposed, will change the motion of an object. A force can cause an object with mass to change its velocity (which includes beginning moving from a state of rest), i.e., to accelerate. Force can also be described intuitively as a push or a pull.

= google

lol

Answer:

The answer is A. Decreased Fluidity

Explanation:

Taking the test on preformance matters

In evaporation, particles of liquids take energy in the form of sunlight from the surrounding and then convert into vapor phase. Increased kinetic energy causes certain liquid molecules to become vapor molecules.

Evaporation is a physical process in which the water in liquid state converts to gaseous state at the temperature below its boiling point. Evaporation happens before the boiling process.

Evaporation causes cooling effect in the surrounding. During summer when water is kept in earthen pot water cools, this is because of the evaporation process.

Evaporation is affected by temperature. As the temperature increases, kinetic energy of liquid molecules also increases and hence the rate of evaporation increases.

Therefore, increased kinetic energy causes certain liquid molecules to become vapor molecules.

To know more about evaporation, here:

https://brainly.com/question/8169606

#SPJ2

Answer:

each principal energy level above the second contains, in addition to one s orbital and three p orbitals, a set of five d orbitals, called the d sublevel. The five d orbitals can hold up to 10 electrons. Thus, the third level holds a maximum of 18 electrons: 2 in the s orbital, 6 in the three p orbitals, and 10 in the five d orbitals.

Explanation:

Answer:

Sulfur

Explanation:

Answer:

273.6 g

Explanation:

mass =(density)(volume)

mass=(5.7g/cm^3 )(48 cm^3)

cancel out your cm^3 and your are left with grams

multiply (5.7g)(48)=273.6 g

The mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.

Density is defined as the degree to which a material is packed together.

It is also defined as a mass per unit volume of the substance.

Its SI unit is kilogram per cubic meter or  gram per meter.

Density can be expressed as

Density = mass / volume

Mass =  density x volume

As given, Density = 5.7 g/cm³

                Volume = 48 cm³

So, Mass =  5.7 g/cm³ x  48 cm³

               =  273.6 grams

Thus, the mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.

To learn more about density, refer to the link below:

https://brainly.com/question/15164682

#SPJ5

Answer:0.085

Explanation:

Answer:

i believe it's c

Explanation:

my reason is that if you look at the electrons 2 is the most comm

Answer:

D. a technique of recording data

Answer:

Its high

Explanation:

Becuase if u times it what do u get

Answer:

The valence electron configuration determines the group to which an element belongs to.

Explanation:

The valence electron configuration of an atom of an element refers to the number of electrons in that atoms outermost shell.

The valence electron configuration is related to the group number of an element in that the number of electrons in the valence shell of an atom of an element determines the group to which an element belongs to. For example, all elements having one valence electron belong to group IA of the periodic table. Similarly, all elements having seven valence electrons belong to group VIIA of the periodic table.

This is because, since the reactivity of an element is related to its ability to either gain or lose a certain number of electrons in its valence shell, elements having same number of valence electrons have similar chemical properties.

Answer:

The correct option is;

(B) [tex]\Delta H_{mix} < 0[/tex], solution shows negative deviation

Explanation:

The given parameters are;

The available volume of liquid A = 25 cm³

The available volume of liquid B = 20 cm³

The volume of the solution (mixture) = 44.8 cm³

Therefore, we have;

[tex]\Delta _{mix} V < 0[/tex]

Which is one of the prerequisite for the formation of negative deviation

When a non-ideal solution shows negative deviation according to Raoult's Law, we have;

[tex]\Delta _{mix} H < 0[/tex], we have more heat released due to new molecular interactions.

Answer:

101 g Na

Explanation:

To convert between moles and grams, you have to use the molar mass of the substance. The molar mass of sodium is 22.99 g/mol. You use this as the unit converter.

[tex]4.39molNa*\frac{22.99gNa}{1molNa} = 100.9261gNa[/tex]

Round the number to the lowest number of significant figures; 101 g Na.

The mass of 4.39 moles of sodium (Na) is 100.97grams.

Mass = no. of moles × molar mass

Mass of Na = 4.39 × 23

Mass of Na = 100.97grams.

Therefore, mass of 4.39 moles of sodium (Na) is 100.97grams.

Learn more about mass calculations at: https://brainly.com/question/8101390

Answer:

nucleus formed

prophase

metaphase

anaphase

telophase and cytokinesis

Answer:

Sudden decrease in the velocity at the boundary.

Explanation:

The shadow zone is the zone of the earth from angular distances of 104° to 140° from a known earthquake that does not directly receive any P waves. Now, this shadow zone occurs as a result of S waves getting stopped completely by the liquid core and the P waves being refracted by the liquid core.

From earlier seismic discoveries, this boundary which is the shadow zone that does not directly receive any P-waves was found to be due to the fact that the P-waves were refracted inwards as a result of the sudden decrease in velocity at the boundary.

Explanation:

Caesium (Cs) has a smaller ionic radius than it's neutral atom.

because Caesium belong to Group 1 and It loses 1 electron. After losing 1 electron it gains 1 positive charge that's why caesium ionic radius become smaller as compared to neutral atom.

Therefore,

Option B is correct.

Answer: C.

Explanation: Alcohol floats on oil and water sinks in oil. Water, alcohol, and oil layer well because of their densities, but also because the oil layer does not dissolve in either liquid. The oil keeps the water and alcohol separated so that they do not dissolve in one another. ... Water sinks because it is more dense than oil.

Answer:

h,c,n,o,p those are the elements

Answer:

7. 4H₂O

Elements: Hydrogen, Oxygen

Number of molecules: 4

Number of elements: 8 H, 4 O

Number of Atoms: 12

Explanation:

The elements are determined by the their symbol i.e. H = hydrogen.

The number of molecules is determined by the coefficient ( the number in front of everything, in this case 4).

The number of elements is determined by the coefficient and the subscripts. Multiply the coefficient by the subscript after each element. When there is no subscript, it is equal to 1.  4H₂ = 4x2 = 8;  4O = 4x1 = 4.

The number of atoms is all the individual elements added together. 8+4 = 12.

Answer:

D

Explanation:

Option D gives the correct model of C7H16. From the option, one will discover that the model has 7 carbons in the backbone. If you count the attached hydrogen, you will discover that the hydrogen is 16 in total.

This model or skeletal structure of this element represents heptane. Heptane or n-heptane is known to be a straight-chain compound and an alkane. It's chemical formula can also be written as: H₃C(CH₂)₅CH₃ or C₇H₁₆.

This compound is known to be one of the main components of gasoline. It is known to be a volatile organic compound and a clear and colorless liquids with a petroleum-like odor.

Answer: D

Explanation: Just took the test

Answer:

D all above yes I think it's all above

Answer:  D

Explanation: All of the above.

Plz mark brainliest:)

Answer: A

Explanation:

The charge-to-mass ratio of electrons is always the same constant, no matter which substances are used in the cathode ray tube.

Explanation:

So, from this, we can conclude that the charge-to-mass ratio of electrons is always the same constant, no matter which substances are used in the cathode ray tube describes Thomson's conclusion that electrons are present in all atoms.

Learn more about J.J. Thomson's model of atom here:

brainly.com/question/2437167?referrer=searchResults

brainly.com/question/1874920?referrer=searchResults

Answer:

0.127 N/m² or 0.127 Pa

Explanation:

From the question given above, the following data were obtained:

Radius (r) = 5 m

Force (F) = 40 N

Pressure (P) =.?

Next, we shall determine the Surface area of the sphere (i.e the balloon). This can be obtained as follow:

Surface area = 12.56 × r²

Radius (r) = 5 m

Surface area = 12.56 × 5²

Surface area = 12.56 × 25

Surface area = 314 m²

Finally, we shall determine the pressure as follow:

Force (F) = 40 N

Surface area = 314 m²

Pressure (P) =.?

Pressure = Force /Area

Pressure = 40/314

Pressure = 0.127 N/m² = 0.127 Pa

Therefore, the pressure inside the balloon is 0.127 N/m² or 0.127 Pa.