Answers
Answer:
2 Nitrogen
Explanation:
This is because it says Diammonium Hydrogen Phosphate. Here. (NH4)3PO4 is one way to write this. However, another way to write this is (NH4)2HPO4. There should be in fact two ammonium groups, NH4 and 1 Hydrogen to get 3+ charge to balance the 3- charge from the Phosphate.
Related Questions
What does the name "atom" mean in
Greek?
Answers
It means indivisible
Answer:
The Greek root of atom is atomos, which means "indivisible," since the scientists who first gave the atom its name imagined it couldn't be split or divided into smaller pieces.
Explanation:
Which would most likely be the pH of a highly-corrosive acid? 1 5 8 11
Answers
Answer:
it is 1 because of it is below 7 then it will be dangerous for humans
The pH of the highly corrosive acid, given the data from the question is 1
What is pH ?This is simply a measure of the acidity / alkalinity of a solution.
The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration
pH scaleThe pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.
The scale ranges from 0 to 14 indicating:
0 to 6 indicates acid 7 indicates neutral 8 to 14 indicate basicNOTE: The lesser the pH of a substance, the more acidic (corrosive) it is and the greater the pH of the substance, the less acidic (corrosive) it is.
With the above information about pH, we can conclude that the pH of the highly corrosive acid, given the data is 1
Learn more about pH:
https://brainly.com/question/3709867
#SPJ2
A solution that holds more solute than it normally can under the conditions at a given temperature is _____. supersaturated unsaturated saturated diluted
Answers
Answer:
Supersaturated !
Explanation:
Why can stars be called element factories?
Answers
Answer:
They came from the element factories we call stars. Stars are mostly hydrogen throughout most of their lifespans. They are driven by massive and continuous thermonuclear reactions and gravity. ... This extra heat begins to fuse helium atoms into heavier elements like carbon and oxygen and gives new life to the star.
Explanation:
The phase of matter most likely to be present at absolute zero would be:
A)
plasma
B)
gas
C)
liquid
D)
solid
Answers
Answer:
D solid
Explanation:
Sanjay is learning about the elements that make up Earth’s crust. Ms. Richards, his Earth science teacher, gives him an element and asks him to determine which element from Earth’s crust it is. She also provides Sanjay with this table. Sanjay weighs the element and finds that it has a mass of 17.98 g. By placing the element in water, he determines the volume of the substance to be 2.2835 mL.
Based on the table from Ms. Richards, what element from Earth’s crust did Ms. Richards gave to Sanjay?
A) iron
B) calcium
C) aluminum
D) silicon
Answers
Answer:
Iron
Hope this helps! Stay safe!
(Plz vote me as brainliest)
Answer:iron
Explanation:
What is the function of the esophagus?
Answers
The esophagus functions primarily as a transport tube that directs the progression of food and fluids from the mouth to the stomach.
How would I create a Lewis dot structure with the compound: CHBr2Cl
Answers
Answer:
Step 1: Find the Total Number of Valence Electrons. ...
Step 2: Find the Number of Electrons Needed to Make the Atoms "Happy" ...
Step 3: Determine the Number of Bonds in the Molecule. ...
Step 4: Choose a Central Atom. ...
Step 5: Draw a Skeletal Structure. ...
Step 6: Place Electrons Around Outside Ato
Explanation:
Photons are emitted as electrons in the atom jump up in energy. true or false?
Answers
Answer:
true
Explanation:
photons are emitted when electrons move from from a lower energy level to a higher energy level
What type of bond is present between two atoms of zinc in a nickel
Answers
Answer:
Pure covalent
Explanation:
To know the type of bond between two atoms you must find the electronegativity difference of them:
If electronegativity difference is:
< 0.4: Pure covalent.
Between 0.4 and 1.8: Polar covalent.
> 1.8: Ionic.
The electronegativity of Zn is 1.65 and Ni is 1.91. Electronegativity difference is:
1.91 - 1.65 = 0.26
That means the type of bond is:
Pure covalentIf you added an excess of sodium phosphate dodecahydrate to 4.512 g barium chloride dihydrate, how many grams of barium phosphate could you synthesize
Answers
Answer:
3.35g of Ba3(PO4)2
Explanation:
The balanced chemical equation is given as;
3 BaCl2 + 2 Na3PO4 → 6 NaCl + Ba3(PO4)2
Fro the reaction;
3 mol of BaCl2 (624g) reacts wth 2 mol of Na3PO4 (327.88g) to form 1 mol of Ba3(PO4)2 (601.93g)
Since Na3PO4 is in excess, the limiting reactant is; BaCl2. It would determine how much of Ba3(PO4)2 is formed.
624g of BaCl2 = 601.93g of Ba3(PO4)2
4.512g of BaCl2= xg of Ba3(PO4)2
x = 4.512g * 601.93g / 624g
x = 3.35g of Ba3(PO4)2
The mass of barium phosphate synthesized is 3.612 g.
The equation of the reaction is;
3 BaCl2.2H2O + 2 Na3PO4.12 H2O → 6 NaCl + Ba3(PO4)2 + 14H2O
Molar mass of barium chloride dihydrate = 244.26 g/mol
The number of moles of barium chloride dihydrate = 4.512 g/244.26 g/mol
= 0.018 moles
From the balanced reaction equation shown;
If 3 moles of barium chloride dihydrate yields 1 mole of barium phosphate
0.018 moles of barium chloride dihydrate yields 0.018 moles × 1 mole/3 moles
= 0.006 mole of barium phosphate
Mass of barium phosphate = 602 g/mol × 0.006 mole
= 3.612 g
Learn more: https://brainly.com/question/9743981
Predict: Note the type of reaction you expect for the reactants Kl and Pb(NO3)2
Answers
Answer:
double replacement
Explanation:
just did it
Answer:
Double replacement
Explanation:
Rank lead, phosphorus, and barium in order of increasing ionization energy.
A) Pb < P < Ba
B) Ba < P < Pb
C) Pb < Ba < P
D) Ba < Pb < P
Answers
Answer:
D) Ba < Pb < P
Explanation:
Barium (Ba): 5,2117
Lead (Pb): 7,4167
Phosphorus (P): 10,4867
Increasing order of ionization energy:
Ba < Pb < P
Electronic configurations of given elementsPb: [Xe] 6s² 4f¹⁴ 5d¹⁰ 6p²
P: [Ne] 3s² 3p³
Ba: [Xe] 6s²
All the given elements have stable half-filled subshells. But phosphorus has the smallest atomic size among them, so it will have the lowest tendency to remove an electron from its valence shell and hence will require the highest amount of ionization energy. Barium has a higher atomic size than lead, therefore it has lower ionization energy than lead.How are ionization energy and atomic size related?The force of attraction is stronger when the electron is closer to the nucleus, and as a result, more energy is needed to overcome this attraction and remove the electron.Therefore, the ionization energy increases with decreasing radius and vice versa.Learn more about trends of ionization energy here:
https://brainly.com/question/6842791
#SPJ2
A sample is left on the desk over several hours. On examination, the crystals appear moist, andliquid is forming around them. The compound is classified as:
a. Stableb.
b. Deliquescent
c. Efflorescentd.
d. Hygroscopic
Answers
Answer:
c. Efflorescent
Explanation:
Some hydrated salts, when exposed to the atmosphere, give off part of all of their water of crystallization spontaneously to form a lower dehydrated or anhydrous salt. Such salts are known as efflorescent and the phenomenon is called Efflorescence.
Efflorescence occurs when the hydrate's aqueous vapor pressure is greater than the water vapor's partial pressure in the air. For example, because the vapor pressures of washing soda (Na2CO3·10H2O) and Glauber's salt (Na2SO4·10H2O) normally exceed that of the water vapor in the atmosphere, these salts effloresce (i.e., lose all or part of their water of hydration), and their surfaces assume a powdery appearance.
At what time was the frog sitting still or at rest
Answers
Answer:
What are the times and is that your question?
Explanation:
Need help ASAP..... (0.567 liters of H2O is how many moles of H2O? HINT: 1 mL H20 = 1 gram
H20)
Answers
Answer:
31.5 moles
Explanation:
Volume of H2O = 0.567 L
Number of mole of H2O =.?
Next, we shall convert 0.567 L to millilitres (mL). This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.567 L = 0.567 L × 1000 mL / 1 L
0.567 L = 567 mL
Thus, 0.567 L is equivalent to 567 mL.
Next, we shall convert 567 mL to grams (g). This can be obtained as follow:
1 mL of H2O = 1 g
Therefore
567 mL of H2O = 567 g of H2O
Finally, we shall determine the number of mole in 567 g of H2O. This can be obtained as follow:
Mass of H2O = 567 g
Molar mass of H2O = (2×1) + 16
= 2 + 16 = 18 g/mol
Mole of H2O =?
Mole = mass /Molar mass
Mole of H2O = 567 /18
Mole of H2O = 31.5 moles
Photosynthesis happens in the _____
O: lower epidermis
O: upper epidermis
O: palisade layer
O: spongy layer
Answers
The process during which a substance changes from a solid directly to a gas without becoming a liquid is known as: Example(dry ice)
A)
condensation.
B)
fusion.
C)
melting.
D)
sublimation.
Answers
What would be the temperature as well as pressure inside and outside of a can if it were to be placed in cold water?
Answers
Answer:
The hot gas molecules are the same pressure as the air outside the can. When the can is placed in cold water upside down, the hot gas water molecules are cooled very rapidly. ... Since the air pressure outside the can is stronger than that inside the can, it causes the can to collapse.
Explanation:
Which of the following is the BEST description of our atmosphere?
It dissolves meteors and protects us from ultraviolet radiation.
It’s made of a mixture of gases that protect Earth and help create conditions that allow life to live here.
It’s made of nitrogen and oxygen.
It contains a mixture of gases.
Answers
Answer:
I think the answer is B.
Answer:
B
Explanation:
Other things like A, C, and D are not the best explanation because they are all simple senteces.
Radio waves are examples of electromagnetic waves. T or F
Answers
Answer:
the answer is true
Explanation:
A chemist working as a safety inspector finds an unmarked bottle in a lab cabinet. A note on the door of the cabinet says the cabinet is used to store bottles of pentane, tetrahydrofuran, carbon tetrachloride, methyl acetate, and ethanolamine. The chemist plans to try to identify the unknown liquid by measuring the density and comparing to known densities. First, from his collection of Material Safety Data Sheets (MSDS), the chemist finds the following information: liquid density pentane tetrahydrofuran carbon tetrachloride methyl acetate ethanolamine Next, the chemist measures the volume of the unknown liquid as and the mass of the unknown liquid as . Calculate the density of the liquid. Round your answer to significant digits. Given the data above, is it possible to identify the liquid
Answers
Answer:
The liquid can be identified
Explanation:
Given that density is defined as mass per unit volume.
We have the following information regarding the unknown liquid;
Mass= 1.40 kg = 1400 g
Volume = 1378 cm^3 = 1378 ml
Density of unknown liquid = 1400/1378 = 1.012 g/ml this is approximately 1.0 g/ml
It is possible to identify the liquid, the liquid is ethanolamine
In models of molecules, spheres of different colors and
sizes represent different types of atoms.
Which model shows a molecule of a substance that is made up of three
elements?
A
B
C
Or
D ?
Answers
Answer:
D
Explanation:
According to this question, each model of molecules in the options contains spheres of different colors and sizes representing different types of atoms. The atoms of the same element are the spheres of same color and size while atoms of different element are of different color or size.
Therefore, the model showing a molecule of a substance that is made up of three elements is model D because it is made up of three distinct spheres representing atoms of each element.
- The red sphere is the atom of the first element
- The big dark sphere is the atom of the second element
- The small white sphere is the atom of the third element
Answer:
D
Explanation:
illustrate the respiratory system
Answers
I hope this has the information that you need
30 POINTS
Why would a scientist revise a model? (choose the best answer)
Group of answer choices
to cover up evidence from a previous experiment
to show off to other scientists
to add unnecessary details to the model
in order to better explain what is happening during a phenomenon
When modeling it is important to (pick two)
Group of answer choices
show beginning, middle and end if it fits the phenomenon
only use one color
make sure there is only drawings and nothing written
use zoom in bubbles to show the unobservable
Which of the following is NOT a limitation of a model
Group of answer choices
inaccurate colors
the type of material used to create the model
a messy model
shapes that are an approximation
Answers
Answer:
First Question: in order to better explain what is happening during a phenomenon
Second Question: show beginning, middle and end if it fits the phenomenon; use zoom in bubbles to show the unobservable
Third Question: the type of material used to create the model
Explanation:
First Question: You would not revise a model to "cover up evidence," that's scientifically immoral and should not be done, and showing off to other scientists is not the point of revising something.
Second Question: You should use more than one color to differentiate different parts of the model, but don't overwhelm it with color. There should be some labels in the model, so some writing is necessary.
Third Question: Inaccurate color representation does not technically limit a model unless color scheme is important, so this could be an answer, but not likely. A messy model limits a model because it makes it hard to read. Approximating shapes is a limitation because it portrays an incorrect representation of what system the model is of. The type of material used to create the model is most likely the right answer.
List the factors that cause low oxygen levels.
Answers
Answer:
Common causes of hypoxemia include:
Anemia.
ARDS (Acute respiratory distress syndrome)
Asthma.
Congenital heart defects in children.
Congenital heart disease in adults.
COPD (chronic obstructive pulmonary disease) exacerbation — worsening of symptoms.
Emphysema.
Interstitial lung disease
and many more.....
Which reason best explains why metals are malleable?
A. because they have delocalized electrons
B. because they have localized electrons
C. because they have ionic bonds
D. because they have rigid bonds
Answers
Answer:
A
Explanation:
because they have delocalized electrons
Metals are malleable because they have delocalized electrons which are capable of forming ionic bonds.
What is an ionic bond?
Ionic bond or electrovalent bond is a type of bond which is formed between two elements when there is an exchange of electrons which takes place between the atoms resulting in the formation of ions.
When the atom looses an electron it develops a positive charge and forms an ion called the cation while the other atom gains the electron and develops a negative charge and forms an ion called the anion.
As the two atoms are oppositely charged they attract each other which results in the formation of a bond called the ionic bond.Compounds having ionic bonds are malleable and have high melting points.They are also brittle in nature.
Learn more about ionic bond,here:
https://brainly.com/question/11527546
#SPJ6
Pls help I dont get science so pls help me
Answers
Which phrase is not an example of intercellular communication?
A chemical messengers dock onto receptors of adrenal gland
B chemical signal from pituitary gland to adrenal gland
C electrical signals pass between heart cells
D a vesicle encloses over a nutrient molecule
Answers
Answer: The answer is D
Explanation: I took the quiz just now and got it right
The correct answer is:
D.(a vesicle encloses over a nutrient molecule)
I took the test, hope this helps!
The purpose for witch something is designed or exists
Answers
Answer:
to help
Explanation:
to help