Calculate the time required for a constant current of 0.868 A to deposit 0.387 g of Tl(III) as Tl(s) on a cathode.

Answer:

20.180042 amu

Explanation:

From the question given above, the following data were obtained:

Isotope A (20Ne)

Mass of A = 19.9924356 amu

Abundance (A%) = 90.48%

Isotope B (21Ne):

Mass of B = 20.9938428 amu

Abundance (B%) = 0.27%

Isotope C (22Ne):

Mass of C = 21.9913831 amu

Abundance (C%) = 9.25%

Average atomic mass of Neon =.?

The average atomic mass of Neon can be obtained as follow:

Average atomic mass = [(mass of A × A%)/100] + [(mass of B × B%)/100] + [(mass of C × C%)/100]

= [(19.9924356 × 90.48)/100] + [(20.9938428 × 0.27) /100] + [(21.9913831 × 9.25) /100]

= 18.0891557 + 0.05668338 + 2.03420294

= 20.180042 amu

Therefore, the average atomic mass of Neon is 20.180042 amu

Answer:

What is the question?

Answer:

opposite

Explanation:

Answer:

opposite

Explanation:

cu9c9ucoucucpucfpufupfpucupvpjvpucu

Answer:

This question is incomplete

Explanation:

However, when the carboxylic acids and esters put together are obtained, the procedure below can be followed in drawing and naming them.

For carboxylic acid,

1) it should be noted that the functional group here is -COOH which is drawn as -C = OH

      |

     OH

2) The carbon of the functional group is included among the carbon to be counted when naming the structure. For example, the compound below is propanoic acid.

CH₃CH₂COOH - As you can see that there are 3 carbons linked chain there.

3) As can be seen in (2) above, the suffix "oic" is used to name carboxylic acids

4) The carbon chain here is saturated (meaning there is no double or triple bond within the carbon chain)

Example of a structure of carboxylic acid is

H₃C - CH₂ - CH₂ - C = OH

                              |

                             OH

The structure above is a butanoic acid

For ester

1)The functional group here is -COO- . which can be drawn as

- C = O

   |

  O -

(meaning one oxygen atom is double bonded to the carbon and the other oxygen atom is bonded to another carbon chain)

2) The alkyl group attached to the oxygen atom is first of all mentioned before the carbon chain attached from the left is mentioned. For example, CH₃CH₂CH₂COOCH₂CH₃ is ethyl butanoate

3) As seen from (2) above, the suffix "oate" is used to end the name of esters

4) As also seen from (2) above, the carbon of the functional group is also included while counting the carbon chain of the parent name (butanoate).

5) The carbon chains here are also saturated.

Example of this ester is

CH₃CH₂C = O

              |

             O - CH₂CH₃

The name of this compound is ethyl propanoate

Answer:

the answer is D. N

AP3X

According to electronic configuration, there are 3 electrons in the 2p sublevel ,hence the correct option is D.

Electronic configuration is defined as the distribution of electrons that are present in an atom or molecule in  an atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is important for understanding the structure of periodic table. It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions so as to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in  their ground state and hence are said to be stable.

Thus, the correct option is D.

Learn more about electronic configuration,here:

https://brainly.com/question/29184975

#SPJ4

Answer:

349.22°C

Explanation:

Let the final temperature of the two pieces of metal be x.

Now, the warmer metal which is C u reduces from 475°C to x. Thus Δt for C u is; Δt1 = 475 - x.

The cooler metal Cr increases in temperature from 265°C to x. Thus, it's change in temperature is Δt for Cr is; Δt2 = x - 265.

Now from conservation of energy, the amount of energy leaving the C u metal is equal to the amount of energy entering the Cr metal.

Thus;

q_lost = q_gain

Where;

q_lost = m1•c1•Δt1

q_gained = m2•c2•Δt2

Now, c1 & c2 are the specific heat capacity of C u and Cr respectively.

From online tables, c1 = 0.385 J/g°C and c2 = 0.46 J/g°C

We are given;

m1 = 12g and m2 = 15g

Thus;

12 × 0.385 × (475 - x) = 15 × 0.46 × (x - 265)

2194.5 - 4.62x = 6.9x - 1828.5

6.9x + 4.62x = 2194.5 + 1828.5

11.52x = 4023

x = 4023/11.52

x = 349.22°C

Answer:

The answer is true

Explanation: Because The law of multiple proportions states that when two elements react to form more than one compound, a fixed mass of one element will react with masses of the other element in a ratio of small, whole numbers.

Answer:

one example of chemical weathering is when carbon dioxide mixes with water.

Explanation:

when dioxide mixes with water it creates carbonation.

Answer:

The answer is "[tex]37.45364 \ g[/tex]"

Explanation:

Equation:

[tex]2AgNO_3 (aq) + Na_2CO_3 (aq) \longrightarrow Ag_2CO_3 (s) + 2NaNO_3 (aq)[/tex]

Calculating  the mol of  [tex]AgNO_3[/tex]:

[tex]\to V = 40.0 mL\\\\[/tex]

       [tex]= 40.0 \times 10^{-2} \ L \\\\[/tex]

[tex]\to n = Molarity \times Volume \\\\[/tex]

       [tex]= 0.679 \times 40.0 \times 10^{-2}\\\\= 27.16 \times 10^{-2} \ mol[/tex]

mol of [tex]Ag_2CO_3= \frac{1}{2} \times n\\\\[/tex]

                         [tex]= \frac{1}{2} \times 27.16 \times 10^{-2}\\\\= 13.58 \times 10^{-2}\\\\[/tex]

Calculating the molar mass of [tex]Ag_2CO_3[/tex],:

[tex]= 2\times MM(Ag) + 1 \times MM(C) + 3 \times MM(O)\\\\= 2 \times 107.9 + 1 \times 12.01 + 3 \times 16.0\\\\= 275.81 \ \frac{g}{mol}[/tex]

Calculating the mass of [tex]Ag_2CO_3[/tex],

[tex]m = mol \times molar \ mass[/tex]

   [tex]= 13.38 \times 10^{-2}\ mol \times 2.758 \times 10^2 \ \frac{g}{mol}\\\\= 37.45364 \ g[/tex]

Answer:

D. Supported by observations

Explanation:

Because theories change over time, they both need to be proven, they do not go off of consensus, but they do need to be supported by observations.

HOPE IT HELPS❣️

Answer:

D.All three graph lines peak over the same few weeks of winter.

Explanation:

took the test

Answer:

720

Explanation: study island

Answer:

720

Explanation:

Answer:

The flask has to be closed during the hydrochloric acid and sodium carbonate reaction as the resultant gas got trapped inside the closed flask.

Explanation:

The hydrochloric acid and sodium carbonate reaction was exothermic that caused the pressure to decrease. The flask has to be closed during the hydrochloric acid and sodium carbonate reaction as the resultant gas got trapped inside the closed flask.

In exothermic reactions, energy is produced in the form of heat or light.

Answer:

liquid

Explanation:

correct answer hope it helps

Answer:

Zero

Explanation:

An an equal mixture of the R and S enantiomers of carvone is called a racemic mixture.

In a racemic mixture, the R enantiomer rotates plane polarized light in one direction while the S enantiomer rotates plane polarized light in another direction.

This cancels out the rotation due to each enantiomer since they are equal in magnitude but opposite in direction leading to a specific rotation of zero for the racemic mixture.

Answer:

V = 43.95 L

Explanation:

Given data:

Mass of CH₄ decomposed = 15.63 g

Volume of H₂O produced at STP = ?

Solution:

Chemical equation:

CH₄ + 2O₂    →       2H₂O  + CO₂

Number of moles of CH₄:

Number of moles = mass/molar mass

Number of moles = 15.63 g/ 16 g/mol

Number of moles = 0.98 mol

Now we will compare the moles of H₂O with CH₄.

                         CH₄              :              H₂O

                           1                 :                2

                        0.98             :            2×0.98 = 1.96 mol

Volume of hydrogen:

PV = nRT

1 atm × V = 1.96 mol × 0.0821 atm.L/mol.K × 273.15 K

V = 43.95atm.L / 1atm

V = 43.95 L

Answer:

m*s⁻¹.

Explanation:

Hello!

In this case, since the frequency measures how repetitive an event is per unit of time, for instance the laps a car drives every 5 minutes or something similar, we can infer it has units of event/time; in such a way, the unit m*s⁻¹ is not a proper unit of frequency because it is a proper unit of velocity which is the distance traveled per unit of time.

In such a way, Hz (hertz), s⁻¹ and 1/s are possible ways frequency can be represented.

Best regards!

Answer:

False

Explanation:

They’re used cause they’re generally harder than pure metals

Alloys are used much more than pure metals because they are generally stronger and less likely to react with air or water...

So I would say false

Answer:

option is (b)

Explanation:

please mark me as brilliant

Answer:

68.48%

Explanation:

The percent mass of an element in a compound tells us about the amount of such element contributed to the total compound.

In this case, 7.28 g sample of chromium metal was heated to produce chromium oxide with weight of 10.63 g. The percent mass of chromium in chromium oxide can be calculated by using the formula:

%mass of Cr = mass of Cr/mass of Chromium oxide × 100%

%mass of Cr = 7.28/10.63 × 100

%mass of Cr = 0.6848 × 100

%mass of Cr = 68.48%

Answer: The percent yield of the reaction is 77.0 %

Explanation:

[tex]2Pb+O_2\rightarrow 2PbO[/tex]

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

[tex]\text{Number of moles of lead}=\frac{451.4g}{207.2g/mol}=2.18moles[/tex]

[tex]\text{Number of moles of lead oxide}=\frac{374.7g}{223.2g/mol}=1.68moles[/tex]

According to stoichiometry:

2 moles of [tex]Pb[/tex] produces = 2 moles of [tex]PbO_2[/tex]

2.18 moles of [tex]Pb[/tex] is produced by=[tex]\frac{2}{2}\times 2.18=2.18moles[/tex] of [tex]PbO_2[/tex]

Mass of [tex]PbO_2[/tex] =[tex]moles\times {\text {Molar mass}}=2.18\times 223.2g/mol=486.6[/tex]

percent yield =[tex]\frac{374.7g}{486.6g}\times 100=77.0\%[/tex]

This follows a simple conversion technique. Basically what the question is trying to say here is to convert 29.1 inHg to mmHg. 1 inHg is equal to 25.4 mmHg so 29.1 inHg would be equal to [tex]25.4 * 29.1[/tex] which when evaluated turns out to be: [tex]739.14[/tex]. :D

The pressure will be 739.14 mm Hg.

The SI unit measuring pressure would be the pascal, which measures the force of each unit area of the surface.

Calculation of pressure

It is known that 1inHg = 25.4 mm Hg.

Hence, the pressure = 25.4 × 29.1 = 739.14 mm Hg

Therefore, the pressure will be 739.14 mm Hg.

To know more about pressure

https://brainly.com/question/15175692

#SPJ2

Answer: Spun yarn is made by twisting staple fibers together

To make a cohesive thread Or “single”. Twisting fibers, into yarn in the process called spinning can be dated back to the upper Paleolithic. Yarn spinning was one of the first processes to be industrialized.

Explanation:

Answer:

B) . six electrons in the triple bond of diatomic nitrogen

Explanation:

The three line in this Lewis dot structure represents the six electrons in the triple bond of diatomic nitrogen.

Nitrogen is made up of 7 electrons with 5 valence ones.

 A lewis structure is made up of the symbol of the element surrounded by dot to represent the valence electrons.

  In this nitrogen molecule, both species share  6 electrons. This makes each nitrogen atom isoelectronic with neon.

Answer:

D)Gas particles move rapidly and have space between them.

Explanation:

Matter exists in three states namely: solids, liquids and gases. The particles contained in these three states are different from one another. In the gaseous state, the particles are FAR APART from one another i.e. space exists and they move at a very fast rate in contrast to the particles of a liquid, which have less space and move slower.

This rapid movement of gas particles within a less restricted space accounts for the reason why gaseous substances DIFFUSE more quickly than liquids.

Answer:

[tex]m_{CO2}=8.33gCO2[/tex]

Explanation:

Hello.

In this case, since the chemical reaction is:

[tex]C_7H_5N_3O_6(s)+\frac{21}{4} O2(g)\rightarrow 7CO_2(g)+\frac{3}{2} N_2(g)+\frac{5}{2} H_2O(l)[/tex]

Thus, since we have the initial moles of TNT:

[tex]n_{TNT}=25.7g*\frac{1mol}{227.13g} =0.113mol[/tex]

And the initial moles of oxygen given the ideal gas equation:

[tex]n_{O_2}=\frac{6.93atm*0.5L}{0.082\frac{atm*L}{mol*K}*298K}=0.142molO_2[/tex]

Given the 1:7 mole ratio between TNT and carbon dioxide and the 21/4:7 mole ratio between oxygen and carbon dioxide, we compute the yielded moles by each reactant:

[tex]n_{CO_2}^{by\ TNT}=0.113molTNT*\frac{7molCO_2}{1molTNT}=0.791molCO_2\\\\ n_{CO_2}^{by\ O_2}=0.142molO_2*\frac{7molCO_2}{21/4molO_2}=0.189molCO_2[/tex]

Thus, since oxygen yields less moles of carbon dioxide than TNT, we infer it is the limiting reactant, therefore, the produced mass of carbon dioxide is:

[tex]m_{CO2}=0.189molCO2*\frac{44.01gCO2}{1molCO2}\\\\m_{CO2}=8.33gCO2[/tex]

Best regards!

If we add water to a concentrated acid, then the solution may boil very violently, splashing concentrated acid. If add acid to water, the solution that forms is very dilute and a small amount of heat is released.

When a strong acid is poured into water, it flows down the flask and mixes much better, so no boiling takes place. The addition of water to acid forms an extremely concentrated solution of acid initially. A large amount of heat is released and the solution may boil very violently, splashing concentrated acid out of the beaker and all this because the reaction is exothermic in nature.

The reason this takes place is due to a large amount of energy liberated in the hydration reaction of concentrated ions. Therefore, we add acid to water dropwise for the dilution with constant stirring and not water to acid directly.

If we add water to acid, then an exothermic reaction occurs and the solution may boil very violently. To form the dilute solution of any strong acid, you should add acid to water and the small amount of heat released is not sufficient to vaporize and spatter it.

Learn more about dilution of acid, here:

https://brainly.com/question/

#SPJ2