The final velocity of the boy after the collision with snowball is 4.84 m/s at 18.4⁰ north-east
The given parameters;
Mass of the boy, m₁ = 25 kgSpeed of the boy, u₁ = 5 m/sMass of the snowball, m₂ = 1.0 kgSpeed of the snow ball, u₂ = 15 m/sThe initial momentum of the boy is calculated as follows;
[tex]P_y = m_1 u_1\\\\P_y = 25 \times 5\\\\P_y = 125 \ kgm/s \ \ north[/tex]
The initial momentum of the snowball is calculated as follows;
[tex]P_x = m_2 u_2\\\\P_x = 1 \times 15 \ \\\\P_x = 15 \ kgm/s \ \ west[/tex]
The resultant momentum of the boy and the snowball after collision is calculate as follows;
[tex]P_f = \sqrt{P_y^2 + P_x^2} \\\\P_f = \sqrt{125^2 + 15^2} \\\\P_f = 125 .9 \ kgm/s[/tex]
The final velocity of the system boy-snowball system is calculated as;
[tex]v_f(m_1 + m_2)= P_f\\\\v_f = \frac{P_f}{m_1 + m_2} \\\\v_f = \frac{125.9}{25 + 1} \\\\v_f = 4.84 \ m/s[/tex]
The direction of the boy after the collision is calculated as follows;
[tex]\theta = tan^{-1}(\frac{v_y}{v_x} )\\\\\theta = tan^{-1} (\frac{5}{15} )\\\\\theta = 18.4 \ ^0[/tex]
Thus, the final velocity of the boy after the collision with snowball is 4.84 m/s at 18.4⁰ north-east
Learn more about inelastic collision here: https://brainly.com/question/7694106
1. An airplane flies with an airspeed (speed relative to the air) of 215
km/h. The wind is blowing at 45.0 km/h. Find the velocity of the
plane (relative to the ground) if the plane is pointed straight west and
the wind is:
A. blowing toward the
west (3 points)
B. blowing toward the east (3 points)
C. blowing toward the south (4 points)
(For part C be sure to calculate the angle as well.)
Answer:
Explanation:
A) 215 + 45.0 = 260 km/h West
B) 215 - 45.0 = 170 km/h West
C) √(215² + 45.0²) = 219.6588... 220 km/h
θ = arctan(45.0/215) = 11.8214... 11.8° S of W
The airplane's ground velocity is westward at 170 km/h regardless of wind direction. The south wind does not affect the plane's westward velocity in component C.
Vector addition will determine each scenario's plane velocity relative to the ground. We'll simplify by assuming a consistent horizontal breeze.
Let's divide the airplane's velocity and wind velocity into westward (negative) and eastward (positive) components.
Data: Plane airspeed = 215 km/h.
45 km/h wind.
A. West wind:
The airplane's westward (negative) ground velocity:
West aeroplane velocity = -215 km/h
-45 km/h west wind.
Find Vg when the wind blows west:
Vg (west) = Aeroplane velocity + Wind velocity (west)
Vg(west) = -215 km/h - (-45 km/h)
Vg (west)=-170 km/h
B. East wind: 2. Westward (negative) aeroplane velocity relative to the ground:
West aeroplane velocity = -215 km/h
Wind velocity (east) = 45 km/h (because the wind is blowing eastward)
Find Vg when the wind blows east:
Vg (west) = Aeroplane velocity (west) + Wind velocity (east).
Vg (west) = -215 + 45 km/h
Vg (west)=-170 km/h
C. Southerly wind: 3. Westward (negative) aeroplane velocity:
West aeroplane velocity = -215 km/h
Wind velocity (south) = 0 km/h (no effect since wind is not moving westward)
Find Vg when the wind blows south:
Vg (west) = Aeroplane velocity (west) + Wind velocity (south).
Vg (west) = -215 + 0 km/h.
Vg (west)=-215 km/h
All resultant velocities are westward and 170 km/h.
Part C's plane's westward velocity is unaffected by the south wind. The plane's ground velocity remains -215 km/h (westward). Since the heading is westward, no angle is needed.
To know more about velocity
https://brainly.com/question/80295
#SPJ2
How do you measure a English saddle to fit your horses?
Answer:
measure the area in which the rider will sit on, then take those measurements to a person who crafts saddles, tell them the exact measurements. then you wait a while until he/she is done then put the saddle on the horse.
Explanation:
Answer:
Explanation:
The shape of the horse's withers is also a determining factor in choosing a saddle. An adjustable hoop saddle allows you to choose with finesse the opening of the tree at the height of the withers, in order to best adapt to each horse. It is the size of the arch that determines the opening of the saddle.
English saddles are the main riding saddles used in equestrian disciplines around the world: Show jumping, endurance, require specific designs to meet specific needs. For example, dressage saddles are designed to bring the rider closer to the horse, allowing him to communicate very precisely with his horse.
How do I solve this problem
Answer:
it is light
Explanation:
the arrow that says light is on the glass it must be near from tungsten
Which of the following statements is NOT true of a hypoosmotic solution?
A. It is also known as a hypotonic solution.
B. There are more dissolved solids within the cell than outside the
cell.
C. It may cause water to move into the cell, which will cause it to
swell.
D. It may cause the cell to shrink or crenate.
Answer:
Good luck on the test, you donuts.
Explanation:
The part of the moon that is visible will appear to grow and shrink during the lunar cycle. This occurs in the direction of _____ to _____.
Answer:
left to right
Explanation:
give me brain pls
Answer:
of the moon to .......
Who did the ram caught in the thicket (Genesis 22:13) represent?
Answer:
I think the answer is goat
What capacitance is needed to store 3μC of charge at a voltage of 120V?
Answer:
C = 0.025F
Explanation:
Charge =q=3×[tex]10^{-6}[/tex]C
Voltage=V=120V
Q=CV
C=Q/V
=3×[tex]10^{-6}[/tex]/120
=1/40×[tex]10^{-6}[/tex]
C = 0.025F
C=2.5 [tex]10^{-4}[/tex]C 0r 25 ×[tex]10^{-3}[/tex]F
1. An electrically charged atom ___________
Answer:
Is called an Ion
Explanation:
Answer:
An electrically charged atom is called an ion
A crane is lifting a 500 lb piano with a velocity of 2fts''. Express the power of the crane in hp. (1 hp = 550ft-lbs)
Answer:
goalindia
goalindiaGiven:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kg
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 W
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)⇒ v = 1357.72/2222.64
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)⇒ v = 1357.72/2222.64⇒ v = 0.61 m/s
goalindiaGiven:Mass of car, m = 500 lb = 500 × 0.4536 = 226.8 kgPower output of crane, P = 1.82 hp = 1.82 × 746 = 1357.72 WTo Find:The velocity of the car.Calculation:- The Power can be given by the formula:P = F × v⇒ v = P/F⇒ v = P/mg⇒ v = 1357.72/(226.8 × 9.8)⇒ v = 1357.72/2222.64⇒ v = 0.61 m/s- So, the velocity of the car will be 0.61❤
C. Answer the following questions.
1. Define Earthquake. Write any 3 precautions during earthquake
Answer:
1. An earthquake is a sudden violent shaking of the ground, typically causing great destruction, as a result of movements within the earth's crust or volcanic action. 2. (3 precautions during an earthquake are)... If you are indoors take cover under a desk, Stay away for glass doors, windows or outside doors and finally drop down or hold on to something until the shaking stops.
Hope that helped?
Explanation:
How is the çhocolate shell on the outside of the bar different from the ice cream on the inside?
Answer:
Cake Crunch (Enriched Wheat Flour [Bleached Flour, Niacin, Reduced Iron, Thiamine Mononitrate, Riboflavin, Folic Acid]), Sugar, Vegetable Shortening [Partially Hydrogenated Soybean and Cottonseed Oil], Salt, Sodium Bicarbonate, Artificial Flavor, Soy Lecithin, Soybean Oil, Coconut Oil, Sugar, Chocolate Liquor, ...
explain how wind erosion changes land forms
Answer:
the wind carries abrasive materials
Explanation:
such as sand and salt over time theses small particles slowly strip way at the land form sculpting it by eroding the softer layers first
A ball rolling down a hill with a speed of 8 m/s has 139 J of kinetic energy. What is it's mass in kg?
Explanation:
Velocity of ball (v) = 8 m/sKinetic Energy (K.E) = 139 JMass (m) = ?We know that,
• K.E = ½mv²→ 139 = ½ × m × (8)²
→ 139 = ½ × m × 64
→ 139 = 1 × m × 32
→ 139 ÷ 32 = m
→ 4.34 kg = m
Therefore, mass in kg is 4.34 kg.
What can happen when untreated sewage water contaminates water?
Answer:
Health Effects ↯Life-threatening human pathogens carried by sewage include cholera, typhoid and dysentery. Other diseases resulting from sewage contamination of water include schistosomiasis, hepatitis A, intestinal nematode infections, and numerous others.
Explanation:
BRAINLIEST PLEASE • •︴︴
____
what are the applications of triangle law of forces
Answer:
The triangle law of forces can also be stated as. if a body is in equilibrium under the action of three forces acting at a point, then the three forces can be completely represented by the three sides of a triangle taken in order. A body might be subjected to further than one force at a similar time.
Explanation:
Hope it's help
7. Which of the following explains how radiometric dating is used to estimate absolute
age.
a. By comparing how deep in the curst the radioactive material in a sample of rock
is, scientists can calculate the length of time since the rock formed.
b. By comparing the amount of organic material in a sample of rock, to the known
rate of decay of the parent rock, scientists can calculate the length of time since
the rock formed.
C. By comparing the amount of radioactive material in a sample of rock, to the
surrounding rocks, scientists can calculate the length of time since the rock
formed.
d. By comparing the amount of a radioactive material in a sample of rock, to the
know rate of decay of the parent rock, scientists can calculate the length of time
since the rock formed.
Answer:
d.
Explanation:
Radiometric dating is a method of dating geological/ archaeological specimens by determining the relative proportions of particular radioactive isotopes present in a sample. Carbon dating is a form of radiometric dating, but, in choice b, you're not comparing the carbon to the rock. One would compare ¹⁴C levels within the organic compound, just as one would compare radioactive isotope levels in a rock.
HELP ME the mean free path λ and the mean collision time τ of the molecules of a diatomic gas of molecular mass 6.00 × 10⁻²⁵ kg and radius r = 1.0 x 10⁻¹⁰ m are measured. From these microscopic data can we obtain macroscopic properties such as temperature T and pressure P? If so, consider λ = 4.32 x 10⁻⁸ m and τ = 3.00 x 10⁻¹⁰ s and calculate T and P.
The temperature of the diatomic gas is 300.5 K and the pressure is 5.33 atm.
The given parameters;
Mass of the gas molecules, m = 6 x 10⁻²⁵ kgRadius of the gas, r = 1 x 10⁻¹⁰ mMean free path, [tex]\lambda_{rms}[/tex] = 4.32 x 10⁻⁸ mMean collision time, [tex]\tau = 3 \times 10^{-10} \ s[/tex]The mean velocity of the gas molecules is calculated as follows;
[tex]\tau = \frac{\lambda _{rms}}{V_{rms}} \\\\V_{rms} = \frac{\lambda _{rms}}{\tau} \\\\V_{rms} = \frac{4.32 \times 10^{-8} }{3 \times 10^{-10}} \\\\V_{rms} = 144 \ m/s[/tex]
The temperature of the gas molecules is calculated as follows;
[tex]V_{rms} = \sqrt{\frac{3kT}{M} } \\\\V_{rms}^2 = \frac{3kT}{M} \\\\T = \frac{V_{rms} ^2 M}{3k}[/tex]
where;
k is Boltzmann constant[tex]T = \frac{V_{rms} ^2 M}{3k} \\\\T = \frac{(144)^2 \times (6.0 \times 10^{-25})}{3 \times 1.38 \times 10^{-23}} \\\\T = 300.5 \ K[/tex]
The number of gas molecules per unit volume is calculated as follows;
[tex]\lambda = \frac{1}{4\pi \sqrt{2} \ r^2 n} \\\\n = \frac{1}{\lambda 4\pi \sqrt{2} \ r^2} \\\\n = \frac{1}{(4.32 \times 10^{-8}) \times 4 \pi \times \sqrt{2} \ \times (1\times 10^{-10})^2} \\\\n = 1.303 \times 10^{26} \ molcules/m^3[/tex]
The pressure of the gas molecule is calculated as follows;
[tex]n = \frac{P}{kT} \\\\P = nkT\\\\P = (1.303 \times 10^{26} ) \times (1.38 \times 10^{-23}) \times (300.5)\\\\P = 540,341.07 \ Pa\\\\P = 5.33 \ atm[/tex]
Thus, the temperature of the diatomic gas is 300.5 K and the pressure is 5.33 atm.
Learn more about mean free path of gases here: https://brainly.com/question/4279093
A 4.0-mF capacitor initially charged to 50 V and 6.0-mF capacitor charged to 30 V are connected to each other with the positive plate of each connected to the negative plate of the other. what is the final charge of the 6.0-mF capacitor?
a. 20 mC
b. 8.0 mC
c. 10 mC
d. 12 mC
e. 230 mC
[tex]\huge\color{pink}\boxed{\colorbox{black}{Answer ☘}}[/tex]
12 mC
Explanation:We are given that...
[tex]C_{1} = 4mF \\ V_{1} = 50v \\ C_{2} = 6mF \\ V_{2} = 30v \\ \\ we've \: to \: find \: the \: final \: charge \: on \: the \: 6mF \\capacitor \:- \\ \\ we \: know \: that ,\: \\ Q = CV \\ \\ using \: the \: formula \: \\ Q_{1} = 4 \times 50 = 200mC \\ Q_{2} = 6 \times 30 = 180mC \\ \\ total \: charge , \: Q_{1} - Q_{2} = 200 - 180 = 20mC \\ \\ let \: V \: be \: the \: final \: potential \: \\ 4V + 6V = 20mC\\ 10V = 20mC \\ V = \frac{20}{10} = 2V \\ final \: charge \: Q = CV = 6 \times 2 = 12mC[/tex]
therefore,
✯ σptíσn ( d ) íѕ cσrrєct!hope helpful~
~Be Brainly!please help me !!
Gymnasts often practice on foam floors, which increase the collision time when a gymnast falls. What effect does this have on collisions?
A. The change in momentum needed to stop the gymnast is increased.
B. The change in momentum needed to stop the gymnast is decreased.
C. The force exerted by the floor on the gymnast decreases.
D. The force exerted by the floor on the gymnast increases.
A change in momentum is also called:
a. Impact
b. Imput
c. Impulse
d. Impole
Answer:
c. Impulse
Explanation:
Blonde hair is produced by inheriting double recessive alleles (bb) from one’s parents. What is the probability of their offspring having blonde hair?
plz help
Answer:
over 50% power ability
Explanation:
I believe it's half and half chance that The Offspring or the child will have that trait
3 materials that are denser than water and 3 that arent denser than water
Answer:
denser than water:
1. clay
2. coins
3. rock
aren't denser than water
1. wood
2. sponge
3. apple
Please help me answer the following question!
What is the momentum of a 750-kg Volkswagen Beetle when at rest?
Please give the Value and Unit
Answer:
P = 0
Explanation:
Momentum is defined as the quentity of motion contained in a body. Mathematically, it can be defined as the product of mass and velocity. So, in order to determine the Volkswagen Beetle, at rest, we can use the simple formula, as follows:
where,
P = Momentum of Volkswagen Beetle = ?
m = Mass of Volkswagen Beetle = 750 kg
v = Velocity of Volkswagen Beetle = 0 m/s (since, it is at rest)
Therefore,
P =
A book is at rest on a flat table. The book is pushed across the table, causing it to move
and eventually come to rest again. How does the potential and kinetic energy change
during this process? (1 point)
The potential and kinetic energy will stay the same unless the book speeds
up or slows down
The potential energy increases as the book is pushed across the table.
The kinetic energy stays the same.
The potential energy will stay the same as long as the book stays on the
table. The kinetic energy increases as the book is pushed across the table.
The potential and kinetic energy decreases as the book comes to rest
again
Answer:
Explanation:
As no altitude or mass changed, the potential energy remained constant.
The potential energy will stay the same as long as the book stays on the
table.
Kinetic energy went from zero at rest to a positive value while moving, and then returned to zero when the book was at rest again.
The kinetic energy increases as the book is pushed across the table.
if a current of 2.0 A is flowing from point a to point b, the potential difference between Vb- Va (in V) is:
a. 6
b. 8
c. -6
d. -8
e. 22
Answer:
[tex]\huge\color{skyblue}\boxed{\colorbox{black}{Answer ☘}}[/tex]
[tex]total \: resistance \: ( R_{t} ) = (3 + 1)ohm \\ (since \: the \: resistors \: are \: connected \\ in \: series)[/tex]
[tex]current \: flowing \: through \: circuit(I) = 2A \\ \\ now... \: by \: ohms \: law \\ V = IR\\ V = (2)(4) \\ = > 8v[/tex]
therefore , option (b) is correct!!hope helpful~
Which degree would a person most likely pursue if they are interested in how
computers work to solve problems?
A. Business management
B. Mechanical engineering
C. Computer science
D. Education technology
SUBMIT
Answer:
Computer science
Explanation:
You would get everything you need to know about computers if you took computer science. I hope this helps
Answer:
Computer science
Explanation:
Ben (55kg) is standing on very slippery ice when Junior (25kg) bumps into him. Junior was moving at a speed of 8m/s before the collision. Find the speed of ben and junior as they move across the ice after the collision. Give the answer in m/s. Describe the work you did to get the answer
Answer:
2.5m/s
Explanation:
m1=55kg
m2=25kg
Ben's velocity before collision=0m/s
Junior's velocity before collision= 8m/s
P1=m1v1+m2v2
P1=55kg(0m/s)+25kg(8m/s)
P1=200kg(m/s)
Know that the momentum before the collision = momentum after the collision
P2=(55kg+25kg)V
200kg(m/s)=(75kg)V
200kg(m/s)/75kg=V
V=2.5m/s.
It makes sense bc after they collide, their speed would slow down, and it wouldn't make sense if the momentum would be greater or less after they collide.
A car accelerating from rest for 20s to reach velocity of 15 m/s and it keeps on. moving with this velocity for 50s an then it applied the break
Stop in 30s what is the displacement?
WILL GIVE BRAINLY best answer with steps
Answer:
1125m
Explanation:
The car moves with a uniformly accelerated motion for 20s:
s = 1/2·a·t² + v0·t + s0 (note that vo = 0 and s0 = 0, with v0 being the initial velocity and s0 the initial displacement).
So: s = 1/2·a·t²
The acceleration will be: Δv/Δt = 15m/s / 20s = 0.75 m/s²
s1 = 1/2·0.75 m/s² · (20 s)^2 = 150m
Then it continues with the velocity he acquired (v = a·t = 0.75 m/s²·20s = 15 m/s):
s2 = vt = 15m/s·50s = 750m
The final acceleration, when stopping, will be:
a = Δv/Δt = -15m/s / 30s = -1/2 m/s²
s3 = 1/2·(1/2m/s²)·(30s)² = 225m.
Now we sum s1 with s2 and s3:
s1 + s2 + s3 = 150m + 225m + 750m = 1125m
A device is rated at 1.3kW when connected to a 120 V source. The equivalent resistance of this device in ohm is:
a- 18.3
b- 12.0
c- 11.1
d- 14.4
Answer:
D.
correct me if im wrong
brainlest plsss<333
Cats are groomed often by their owners to remove hair. What logical inference can be made based on this statement?
Answer:
its keeps the fur straight.....im kinda confused with the question
Explanation: