an aqueous sodium acetate, nac2h3o2 , solution is made by dissolving 0.195 mol nac2h3o2 in 0.750 kg of water. calculate the molality of the solution.

A separation process that depends on differing abilities of substances to form gases is called Distillation.

Distillation is a common method used to separate and purify liquids based on their different boiling points. The process involves heating a mixture of liquids to a temperature where one liquid will evaporate and form a vapor, while the other liquids will remain in a liquid state. The vapor is then condensed back into a liquid form and collected, which is then called the distillate. The distillate will be the liquid with the lowest boiling point of all the components in the mixture. This process can be repeated for different boiling point ranges and those multiple distillates will be different components of the original mixture.

Learn more about mixture here:

https://brainly.com/question/24898889

#SPJ4

If 3.20 liters of ammonia gas reacts, the amount of oxygen gas that will be consumed is 4L of oxygen gas (option B).

Stoichiometry refers to the quantitative relationship between the reactants and products of a specific reaction or equation.

According to this question, ammonia gas reacts with oxygen gas to produce nitrogen oxide and water as follows:

4NH₃ + 5O₂ → 4NO + 6H₂O

Based on the above equation, 4 moles of ammonia gas reacts with 5 moles of oxygen gas.

This means that 3.2 litres of ammonia gas will react with 3.2 × 5/4 = 4 litres of oxygen gas.

Learn more about stoichiometry at: https://brainly.com/question/18382922

#SPJ1

Decreasing mass and increasing distance between two objects decrease the gravitational force between two objects.

The concept of gravitational force is described by Newton's Law of Universal Gravitation. This gravitational force is indeed a form of non-contact force; it is a constant attracting and constrictive force in nature.

The attraction force felt by two or even more objects into contact is known as gravitational force. The Gravitational Force Formula, which was derived from Newton's Universal Law of Gravitation, is used to calculate the gravitational force.

F=GmM/r²

From formula we can see that decreasing mass and increasing distance between two objects decrease the gravitational force between two objects.

Therefore, decreasing mass and increasing distance between two objects decrease the gravitational force between two objects.

To learn more about  gravitational force, here:

https://brainly.com/question/3009841

#SPJ1

Answer:

5700 milligrams

Explanation:

To go to a smaller unit you move the decimal to the right.

Considering the given reaction, H 2 O + A dipeptide and water forms two amino acids, hydrolase category does the catalyzing enzyme belongs.

The catalyzing enzyme in the reaction H2O + A dipeptide → two amino acids belongs to the Hydrolase category. This is because the enzyme catalyzes the hydrolysis of a dipeptide, which involves the addition of water (H2O) to the dipeptide to form two amino acids. Hydrolases are enzymes that catalyze the hydrolysis of various types of biological molecules, such as carbohydrates, lipids, and nucleic acids.

1. Esterases, which catalyze the hydrolysis of esters, breaking the bond between the carboxyl and alcohol groups.

2. Lipases, which catalyze the hydrolysis of lipids, breaking the bond between the glycerol and fatty acid groups.

3. Peptidases, which catalyze the hydrolysis of peptides, breaking the bond between the amino acids.

To know more about reaction please refer: https://brainly.com/question/29039149

#SPJ4

The rule of conservation of mass only holds when the combined masses of the reactants and products are equal. As a result, if we know the masses of one reactant and one product, we can calculate the masses of the other reactant and product.

We know that the reactants in this case have beginning concentrations of 25.0 g of lithium and 25.0 g of bromine. The molar mass of lithium is 6.939 g/mol, whereas the molar mass of bromine is 159.808 g/mol.

In order to convert the mass of any material into a unit of moles the temperature and volume of methane and butane must be measured and recorded at various pressures and temperatures in an experiment to confirm Charles's Law. The data from the experiment must then be analyzed to determine whether the relationship between temperature and volume is direct and linear, as predicted by Charles's Law.

To learn more about Charle's law:

https://brainly.com/question/16927784

#SPJ4

Answer:

The reaction provided is not a redox reaction. The equation shows the neutralization reaction between Nitric acid (HNO3) and Phosphoric acid (H3PO3) to produce Nitrogen monoxide (NO), Dihydrogen Phosphate (H2PO4) and water (H2O).

When two or more acids are mixed together, they can neutralize each other. This is called a neutralization reaction. The acid and the base will react to form a salt and water. In this case, Nitric acid is the acid and Phosphoric acid is the base.

The equation for this neutralization reaction can be balanced as follows:

HNO3 + H3PO3 → NO + H2PO4 + H2O

Where HNO3 = Nitric acid

H3PO3 = Phosphoric acid

NO = Nitrogen monoxide

H2PO4 = Dihydrogen Phosphate

H2O = water

The reaction is acidic in nature due to the presence of H+ ions in the products.

In summary, the reaction provided is a neutralization reaction, not a redox reaction. The equation shows that Nitric acid and Phosphoric acid neutralize each other to form Nitrogen monoxide, Dihydrogen Phosphate and water. The reaction is

Answer:

24.3139697

Explanation:

23.995(0.7899)+24.986(0.1000)+25.992(0.1101) = 24.3139697

Molality of sulfuric acid is 1.1.

As we know that density of solution = 1.509 = mass of solution \ Volume.

10% of [tex]H{_2}SO_4[/tex] by mass,

[tex]\frac{10}{100} \times 1.509[/tex] v (g)

As the mass of solvent [tex]=\frac{90}{100}\times 1.509 V(g)[/tex]

98 g of [tex]H{_2}SO_4[/tex] contains moles = 1,

[tex]\frac{10 \times 1.509 V g}{100}[/tex] of [tex]H{_2}SO_4[/tex] contains moles = [tex]\frac{1.509 .v}{10 \times 98}[/tex] moles

Molality = moles of solute/ Mass of solvent (kg)

             =[tex]\frac{1.509 \times 100 \times 1000}{10 \times 98 \times 1.509 .V (kg)}[/tex]

             = 1.1

Hence, the Molality of sulphuric acid is 1.1.

To know more about molality:

brainly.com/question/26921570

#SPJ4

Answer:

n(H2O)=0.167mol

Explanation:

n(H2O)=m/M

m(H2O)=3g, M(H2O)=18g/mol

=>n(H2O)=3/18=o.167mol

The compound can provide the energy for chemosynthesis is the carbon dioxide.

The Chemosynthesis is the process in which the certain microbes will create the energy by mediating the chemical reactions. so that  the animals that live around the hydrothermal vents will make their living from the chemicals that are coming out of the seafloor. The energy stored in the bundles or the packets is known as the photon. The compound can provide the energy for chemosynthesis is the carbon dioxide and the photons.

Thus, The compound carbon dioxide can provide the energy for chemosynthesis. Therefore the correct , option C is correct.

To learn more about chemosynthesis here

https://brainly.com/question/20848380

#SPJ4

An empty container with a volume of 160.0 cm³ is weighed and found to have a mass of 72.3 g. The density of the liquid is 0.797 g/ cm³.

The Mass of empty container = 72.3 g

The Mass of container + Liquid = 199.9 g

The Mass of Liquid =?

The Mass of Liquid = (Mass of container + Liquid) – (Mass of the empty                

                                                                                          container)

The Mass of Liquid = 199.9 - 72.3

The Mass of Liquid = 127.6 g

The volume = 160 cm³

The density is given as:

Density = mass / volume

Density = 127.6 / 160

Density = 0.797 g/cm³

To learn more about density here

https://brainly.com/question/24575988

#SPJ4

Answer:

B: Inverse

Explanation:

The volume of a gold nugget that weighs 67.0 g is 3.47 mL

The relationship between an object's mass and the volume it occupies is known as its density. This means that if an object's volume increases but its mass remains constant, its density will decrease.

We use the equation: to determine the mass of the solution.

ρ = m/V

whre,

ρ = density

m= mass

v= volume

so,

V= m/ρ

We receive:

Gold mass =67.0 grams.

Gold has a density of 19.3 g/mL.

Using the values in the equation above, we obtain:

V= m/ρ

V = 67.0 grams./ 19.3 g/mL.

V= 3.47 mL

Consequently, the gold nugget's volume is 3.47 mL

learn more about density at https://brainly.com/question/13692379

#SPJ4

The options which correctly describe entropy are- Entropy is a measure of the energy dispersal of a system, The greater the freedom of motion of particles in a system, the greater the entropy of the system and Any process that causes an increase in the entropy of a system will be spontaneous.

Entropy is a measure of the disorder or randomness of a system, and it is often associated with the amount of energy that is unavailable to do work. The symbol for entropy is S. It is not another term for kinetic energy or energy of movement.

The second law of thermodynamics says that the total entropy of a system either increases or will remain constant in any spontaneous process. It never decreases.

To know more about thermodynamics, visit here:

https://brainly.com/question/1368306

#SPJ4

The resonance contributor that is most important for protonation in methyl isocyanate is the one in which the nitrogen atom is double-bonded to the carbon atom, and has a formal positive charge, this is called a carbocation or a carbenium ion.

This resonance contributor is considered the most important because it shows the nitrogen atom with the greatest electron density, making it more susceptible to protonation.

In the reaction of methyl isocyanate with strong acids, such as sulfuric acid, the protonation occurs on the nitrogen atom of the molecule. The protonation process is determined by the relative acidity of the nitrogen atom and its electron-withdrawing groups, and thus the resonance contributor that is most important for the protonation is the one that shows the nitrogen atom with the greatest electron density.

Learn more about Resonance here: https://brainly.com/question/29547999

#SPJ4

The specific gravity of methane is 0.554 and the specific gravity of propane is 1.52.

The specific gravity of a gas can be calculated using the formula:

Molecular Weight of Gas / Molecular Weight of Air = Specific Gravity

For methane:

Molecular weight of methane = 16.04 g/mol

Molecular weight of air = 28.97 g/mol

Specific Gravity = 16.04 g/mol / 28.97 g/mol = 0.554

For propane:

Molecular weight of propane = 44.10 g/mol

Molecular weight of air = 28.97 g/mol

Specific Gravity = 44.10 g/mol / 28.97 g/mol = 1.52

A propane leak is more dangerous than a methane leak because propane is heavier than air, so it sinks and can collect in low-lying areas such as basements and crawl spaces, where it can be ignited by a spark or flame. Methane, on the other hand, is lighter than air and tends to rise, making it less likely to accumulate in dangerous concentrations. Additionally, propane is more explosive than methane, so a propane leak can result in a larger and more destructive explosion.

To learn more about  specific gravity here:

https://brainly.com/question/9100428

#SPJ4

the complete question is :

Estimate the methane and propane-specific gravities (gas). 16.04 and 44.10 molecular weights respectively. (In commercial natural gas and propane, the main components are methane and propane; minor amounts of other compounds may be disregarded for this issue.) A propane leak or a methane leak, which is more hazardous? why?

[ NO3-] > [K+] > [Pb2+] is correctly  places the concentrations of the remaining ions in order of decreasing concentration.

As from the given data, we know that,

       Pb(NO3)2 + 2KCl = PbCl2 + 2KNO3

we know,

Pb(NO3)2= 0.005mol

2KCL = 0.005mol

PbCl2 = 0.0025mol

2KNO3 = 0.005mol

SO,

K+ and NO3- spectators 2NO3- for each K+

Pb and K+ are equal but some Pb precipitate

Hence, giving the concentration order as,

[ NO3-] > [K+] > [Pb2+] and the concentration of the chloride ion becomes very small and hence it is negligible.

For more such questions on concentration, Visit:

https://brainly.com/question/17206790

#SPJ4

The highlighted parts of the compound are;

A - Anhydrate

B - Waters of hydration

C - Hydrate

We know that a compound can be said to be hydrated if the compound does contain a water of crystallization. The implication of this is that If we have a compound that has a certain specified number of water molecules attached to it, we can say that the compound is hydrated.

The anhydrous compound is the compound that has lost its water of crystallization. We can tell that for the compound that we have, there is a water of hydration attached.

Learn more about crystallization:https://brainly.com/question/13008800

#SPJ1

Answer:

Nuclear fission

Deciding whether or not to approve a mortgage Future changes in consumer purchase tendencies can be predicted using classification models.

A mortgage is a kind of loan used to buy or keep up real estate, such as a home, piece of land, or other construction. The borrower agrees to make a series of monthly payments, divided into principal and interest, to the mortgage lender. This frequently emerges as a succession of regular, weekly episodes. After then, the asset is forfeited as loan collateral.

Borrowers are need to fill out an application with their selected lender and fulfill a number of criteria, such as down payments and minimum credit scores. Before going on to the closing stage, mortgage applications must pass a stringent underwriting procedure.

To know more about entropy on

https://brainly.com/question/29669969

#SPJ4

A polyatomic ion examples with explanation are:

A polyatomic ion is a group of atoms that are chemically bonded together and carry an overall electric charge. Here are a few examples of polyatomic ions:

Lastly, Hydroxide (OH⁻): This ion is made up of one oxygen atom and one hydrogen atom and it carries a negative 1 charge. It is commonly found in water and it is the basis of many acids and bases.

Learn more about polyatomic ion from

https://brainly.com/question/16349627

#SPJ1

The activation energy for the reaction is 4.187 x 10⁴ J/mol.

The reaction's starting point temperature is 40.0° C

T' = 20.0° C is the reaction's final temperature.

Initial temperature's rate constant is three times higher than final temperature's.

The relationship between the Arrhenius energy and the rate constant is the basis of the presented problem. And the mathematical expression is as follows:

ln k'/k = (Eₐ/R) x (1/T-1/T')

The universal gas constant, R, is used here. And is the activation's Arrhenius energy.

As stated in the issue,

K'/k = 3

Solving as,

ln k'/k = (Eₐ/R) x (1/T-1/T')

ln 3 = (Eₐ/8.134) x (1/293-1/313)

1.098 =  (Eₐ/8.134) x2.18 x10⁻⁴

Eₐ = 4.187x 10⁻⁴ J

Thus, it follows that the required amount of activation energy for the specified reaction is 4.187x 10⁻⁴ J.

Learn more about energy activation at https://brainly.com/question/28384644

#SPJ4

Peptide bonds, glycosidic bonds, phosphodiester  bonds are covalent bonds.

A covalent bond is formed by the equal sharing of electrons by two atoms.

The bond which is  formed between the first carbon atom of one monosaccharide with the four carbon atoms present in the neighboring monosaccharide unit and, which results in the formation of a polysaccharide unit is known as a Glycosidic bond.  In the formation of this bond, a water molecule is released as a by-product.

A covalent bond which is formed between the carboxyl group of one amino acid and the amino group of the neighboring amino acids, is known as a peptide bond. This bond formation involves release of a water molecule as a by-product.

The phosphate-hydroxyl linkage present between two nucleotides where the phosphate group is attached to the hydroxyl group(OH) at the 5'-carbon of pentose sugar is bonded to the hydroxyl group of the 3'-carbon of the pentose sugar present in the next neighboring nucleotide. This bond  is known as a phosphodiester bond.

Thus, option (d) is correct

To know more about covalent bonds here

https://brainly.com/question/2512088

#SPJ4

The exact mass of the second isotope is  224.15 u

The following equation can be used to get the average atomic mass:

average atomic mass = (% of the first isotope/100) x mass of the first isotope+  (% of the second  isotope/100) x mass of the second isotope)

Due to this:

Initially isotope:

% = 62.94 %

Mass = 224.75 u

The second isotope is:

Since there are only two isotopes of the element, the second percentage is equal to 100 minus the first percentage.

% = 100 % - 62.94 % = 37.06 %

Assume Mass = x u.

Average Mass = 223.13 u, as stated

Thus,

average atomic mass = (% of the first isotope/100) x mass of the first isotope+  (% of the second  isotope/100) x mass of the second isotope)

223.13 = (62.94 % x 224.75) +( 37.06 % x 223.13 )

                   100                         100

When we solve for x, we obtain:

x = 224.15 u

learn more about isotope at https://brainly.com/question/11680817

#SPJ4

There are 593.4 grams of formic acid in 100.0 mL of a solution of formic acid (HCOOH) that has a pH of 2.29.

To calculate the grams of formic acid in 100.0 mL of solution, three procedures are performed:

To calculate the concentration of a solution as a function of pH, the following formula is used:

pH = - log [H3O+]

where [H3O+] is eliminated

2.29 = - log [H3O+]

log[H3O+] = -2.29

10-2.29 = [H3O+]

[H3O+] = 129M

Then the number of moles in 100 ml of solution is calculated.

If in 1000 ml of solution there are 129 moles of formic acid

So in 100 ml of solution there are x moles of formic acid

X mole of formic acid = 100 ml x 129 moles / 1000 ml

X moles of formic acid = 12.9

Then with the molecular weight of formic acid (46 g/mol) the grams of this compound in 100 ml of solution are calculated.

If in 1 mole of formic acid there are 46 grams of compound

So in 12.9 moles there are x grams of compound

X g of formic acid = 12.9 mol x 46 g / 1 mol

X g of formic acid = 593.4

Therefore, in 100.0 mL of solution there are 593.4 g of formic acid.

Learn more about calculating grams of formic acid in a solution at https://brainly.com/question/28204278

#SPJ4

tools that are ideal for cleaning glassware Brushes and  Detergent

Scrub the interior of curved glassware with warm tap water and a brush dipped in soapy water. You can flush the sink with this waste water. To avoid severe water stains, detergents, remove soap suds with deionized water. Pouring the DI water rinse through clean glassware should result in a smooth sheet. According to the University of Wisconsin Office of Chemical Safety, acid solutions such fuming sulfuric acid, diluted sulfuric acid, chromic acid solution, piranha solution, and aqua regia (a blend of nitric acid and hydrochloric acid) are used to clean laboratory glassware.

identify tools that are ideal for cleaning glassware.

1. reusable clothes

2.brushes

3. detergents

4. steel wool water

Learn more about detergents here:

https://brainly.com/question/11727239

#SPJ4

The volume of 6 M acetic acid required to fully react with 0.5 g of sodium bicarbonate is 0.099167 mL.

To determine the volume of 6 M acetic acid required to fully react with 0.5 g of sodium bicarbonate (NaHCO3), we need to use the balanced equation for the reaction between acetic acid and sodium bicarbonate.

The balanced equation is:

CH3COOH(aq) + NaHCO3(aq) → CH3COONa(aq) + H2O(l) + CO2(g)

From the balanced equation, we know that one mole of acetic acid reacts with one mole of sodium bicarbonate.

we know that the molarity is moles of solute per liters of solvent, so the number of moles in 0.5 g of sodium bicarbonate is 0.5/84 = 0.00595 mol

And since one mole of acetic acid reacts with one mole of sodium bicarbonate, we know that we need 0.00595 mole of acetic acid to fully react with 0.5 g of sodium bicarbonate.

If we know the molarity of acetic acid, we can calculate the volume of acetic acid required to react with 0.5 g of sodium bicarbonate. we have

V = n / M = 0.00595 / 6 = 0.00099167 L = 0.099167 mL

To know more about sodium bicarbonate click here:

https://brainly.com/question/8560563#

#SPJ4