(a) Write a briefexperimental procedure for the chromic acid test.Include all observations such ascolor change, precipitation, etc.(5 points)(b) What functional groups can be distinguished by this test?(2points)(c) What is the reason for the color change if you get a positive chromic acid test?(3points)(d) Sketch a reaction mechanism for a positive chromic acid test with the above given molecules.(10points) g

Answer:

Explanation:

We are to carefully sketch a curve that relates to the potential energy of two O atoms versus the distance between their nuclei.

From the diagram, O2 have higher potential energy than the N2 molecule. Because on the periodic table, the atomic size increases from left to right on across the period, thus O2 posses a larger atomic size than N2 atom.

Therefore, the bond length formation between the two O atoms will be larger compared to that of the two N atoms.

Answer:

acidic because of electrical issues and the body of electrical equipment

Answer:

height = 4.74 cm

density = 2.23 g/ cm³

Explanation:

Mass of metal = 0.650 kg (650 g)

Width = 0.136 m    

Length = 0.0451 m  

Volume of metal = 291 cm³

Height in cm = ?

density of metal =?

Solution:

Width = 0.136 m    (0.136 m×100 cm/1m = 13.6 cm)

Length = 0.0451 m  (0.0451 m×100 cm/1m = 4.51 cm)

First of all we will calculate the height:

Volume = height× width× length

291 cm³ =      h     × 13.6 cm × 4.51 cm

291 cm³ =      h     × 61.34 cm²

h = 291 cm³ / 61.34 cm²

h = 4.74 cm

Density:

d = m/v

d = 650 g/291 cm³

d = 2.23 g/ cm³

Answer:

2 and a half hours

Explanation:

Time is equal to distance over speed

Answer:

The answer will be 29.4˚C.

Explanation:

Using the formula 5(˚F-32)/9, plug in the numbers and you'll get 29.4˚C.

Answer:

red bricks

Explanation:

right on edg 2020

Red bricks should you use so that the area is cool in terms of temperture. Therefore, option B is correct.

Red bricks can be used in the construction of structures such as buildings, foundations, arches, pavement, and bridges. These can also be used for aesthetic purposes such as landscaping, face work, and a variety of other architectural purposes.

Traditional red bricks are saw to be more robust, and structures constructed with them are stronger than hollow block structures.Red brick can be warm, with rust or terracotta undertones. They could also be cool and more burgundy.

Thus, Red bricks should you use so that the area is cool in terms of temperture, option B is correct.

To learn more about the red bricks, follow the link;

https://brainly.com/question/14893671

#SPJ6

Answer:

-241 kJ/mol

Explanation:

Let's consider the reaction of hydrogen with excess oxygen to form water.

2 H₂ + O₂ ⟶ 2 H₂O

When 2.16g of hydrogen reacts with excess oxygen, 258 kJ of heat are released, that is, Q = -258 kJ. Considering that the molar mass of hydrogen is 2.02 g/mol, the change of enthalpy associated with the reaction of 1.00 mol of hydrogen gas is:

ΔH° = -258 kJ/2.16 g × (2.02 g/1.00 mol) = -241 kJ/mol

Answer:

b. gelatin

Explanation:

a homogeneous noncrystalline consisting of large molecules or ultramicroscopic particles of one substance.

Answer:evaporation

Explanation:

Answer:

Pretty sure its evaporation, if its not I'm very sorry.

Answer:

D

Explanation:

It is a solid everything that is a solid is heavier

Answer:

The acceleration will be .5 and the force will be 37.5

Have a nice day!   :)

Answer:

Hello. The answer is 37.5N.

Explanation:

If you look carfully ، every time that you add one weight the force changes 2.5N so you can do this:

[tex](2.5 \times 5) + 25 = 37.5[/tex]

Answer:

Atomic radii vary in a predictable way across the periodic table. As can be seen in the figures below, the atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus, helium is the smallest element, and francium is the largest.

Explanation:

Answer:

QC= [O2]^3/[F2]^10

Explanation:

Answer:

a) - 0.2 M

b) - 0.2 M

c)- 0

Explanation:

The chemical formula of copper (II) bromide is CuBr₂. Its molar mass (MM) is calculated as follows:

MM(CuBr₂)= MM(Cu) + (2 x MM(Br) = 63.5 g/mol + (2 x 80 g/mol)= 223.5 g/mol

a). Molarity = moles CuBr₂/1 L solution

moles CuBr₂ = mass/MM = 18.7 g x 1 mol/223.5 g = 0.084 mol

Volume in L = 375 mL x 1 L/1000 mL = 0.375 L

M = 0.084 mol/(0.375 L) = 0.223 M ≅ 0.2 M

b). When is added to water, CuBr₂ dissociates into ions as follows:

CuBr₂ ⇒ Cu²⁺ + 2 Br⁻

We have 1 mol Cu²⁺ (copper (II) cation) per mol of CuBr₂. Thus, the concentration of copper (II) cation is:

0.2 mol CuBr₂ x 1 mol Cu²⁺/mol CuBr₂ = 0.2 M

c). The concentration of acetate anion is 0. There is no acetate anion in the solution (the anion from CuBr₂ is bromide Br⁻).

Answer:

D represents the element nitrogen which will gain three valence electrons forming a 3 ion.

Answer:

answer is

Explanation:

D

Answer:D. Both of their ions will have the same negative charge

Explanation:

Answer:

7.71 × 10⁻⁴ M/s

Explanation:

The initial rate of the reaction can be expressed by using the formula:

[tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]

where the number of moles of O₂ = [tex]\dfrac{PV}{RT}[/tex]

where;

Pressue P = 1.00 atm

Volume V =5.74mL =  (5.74 /1000) L

Rate R = 0.082 L atm/mol.K

Temperature = 298 K

[tex]= \dfrac{1.00 \ atm \times \dfrac{5.74 }{1000}L}{0.082 \ L \ atm/mol.K \times 298 K}[/tex]

= 2.35 × 10⁻⁴ mol

Δ[O₂] = [tex]\dfrac{moles \ produced - initial \ mole}{\dfrac{5.08 }{1000}L }[/tex]

Δ[O₂] = [tex]\dfrac{2.35 \times 10^{-4} M - 0 M}{\dfrac{5.08 }{1000}}[/tex]

Δ[O₂]  = 0.04626 M

The initial rate = [tex]\dfrac{\Delta [O_2]}{\Delta t}[/tex]

= [tex]\dfrac{0.04626}{60}[/tex]

= 7.71 × 10⁻⁴ M/s

Answer:

ethyl acetate layer

Explanation:

This question tests your knowledge of the principle of solvent extraction.

In solvent extraction, there is always an organic layer and an aqueous layer. The ethyl acetate is the organic layer while the sodium bicarbonate is the aqueous layer.

A brominated aromatic compound will be extracted into the organic layer (ethyl acetate layer).

Answer:

Explanation:

We shall use the formula S₁V₁ = S₂V₂

S₁ = .1180 M , V₁ = 25.98 mL

S₂ = ? , V₂ = 52.50 mL

.1180 M  x 25.98 = 52.50 x S₂

S₂ = .0584 M

Molarity of the acid solution = .0584 M .

The concentration of the acid solution is 0.058 M.

The equation of the reaction is;

CH3COOH(aq) + KOH(aq) ----->  CH3COOK(aq) + H2O(l)

The following are known;

Concentration of base CB = 0.1180 M

Volume of base VB =  25.98 mL

Concentration of acid CA = ?

Volume of acid VA = 52.50 mL

Number of moles of acid NA = 1

Number of moles of base NB = 1

Using;

CAVA/CBVB =NA/NB

CAVANB = CBVBNA

CA=  CBVBNA/VANB

CA = 0.1180 M × 25.98 mL × 1/52.50 mL × 1

CA = 0.058 M

Learn more: https://brainly.com/question/24381583

Answer:

Pour the mixture through a filter to separate the sand, then evaporate the liquid to separate the salt.

Explanation:

There are various methods used to separate single substances from a mixture. The method adopted depends upon the type of mixture and the ingredients used in it. According to the given question, the mixture comprises of sand, salt and water. Here, the first process will be the process of filtration. Through filtration, the salt-water solution and sand can be separated. Salt-water solution can be separated by the process of evaporation in which sat and water will be separated individually.

Answer:

Compaction.

Explanation:

All the others are before this.

Answer:

i

[tex]J_{m} = 20 [/tex]

ii

[tex]J_{m} = 22.5 [/tex]

Explanation:

From the question we are told that

  The first temperatures is [tex]T_1 =  25^oC =  25 +273 =298 \ K[/tex]

   The second temperature is  [tex]T_2 =  100^oC =  100 +273 = 373 \ K[/tex]

Generally the equation for  the most highly populated rotational energy level is mathematically represented as

     [tex]J_{m} = [ \frac{RT}{2B}]  ^{\frac{1}{2} } - \frac{1}{2}[/tex]

Here R is the gas constant with value [tex]R =8.314 \ J\cdot K^{-1} \cdot mol^{-1}[/tex]

Also  

      B is given as [tex]B=\ 0.244 \ cm^{-1}[/tex]

   Generally the energy require per mole to move 1 cm is  12 J /mole

So   [tex]0.244 \ cm^{-1}[/tex]  will require x J/mole

           [tex]x =  0.244 *  12[/tex]

=>          [tex]x =  2.928 \ J/mol [/tex]

So at the first temperature

     [tex]J_{m} = [ \frac{8.314 * 298  }{2*  2.928 }]  ^{\frac{1}{2} } - 0.5 [/tex]

=>  [tex]J_{m} = 20 [/tex]

So at the second temperature

           [tex]J_{m} = [ \frac{8.314 * 373  }{2*  2.928 }]  ^{\frac{1}{2} } - 0.5 [/tex]

=>  [tex]J_{m} = 22.5 [/tex]

Answer:

Nervous and Excretory

Explanation:

The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.

Nervous and Excretory systems are working together in this scenario.

The nervous system makes you thirsty. The integumentary system makes you sweat. the integumentary system is very similar to the Excretory system.

Learn more:

brainly.com/question/17342396

Answer:

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

From the question we have

mass = 14.5 × 5

We have the final answer as

Hope this helps you

Answer:

Metals and Non-metals

Explanation:

Answer:

Ions of opposite charge strongly attract each other; those of like charges repel. As a result ions in an ionic compound are arranged in a particular manner.

Explanation:

Google is smart