A plane figure has 2 sides that
each 5 inches and 2 sides that are each
3 inches. What is the perimeter of the
plane figure?

Answer:-3

Step-by-step explanation:

The y-intercept is where the line crosses the y-axis so in this case it is -3.

The simplification of the given expression after addition = 130.

Addition is defined as one of the arithmetic operations that is used for the combination of two of more values.

The given values from the question above;

67 + 63 = 130

Learn more about addition here:

https://brainly.com/question/25421984

#SPJ1

The estimated force on the projectile when it is traveling at 750 ft/sec is approximately 696.7 lbs.

One possible interpolating polynomial for these data points is a polynomial of degree 3, also known as a cubic polynomial. Using software or a calculator to fit a cubic polynomial to the data points, the resulting equation is:

F(v) = -0.00000016v³ + 0.0004v² - 0.08v + 0.4

To estimate the force on the projectile when it is traveling at 750 ft/sec, we can substitute 750 for v in the equation above:

F(750) = -0.00000016(750³) + 0.0004(750²) - 0.08(750) + 0.4

F(750) ≈ 696.7

The estimated force on the projectile when it is traveling at 750 ft/sec is approximately 696.7 lbs.

Learn more about The Possible Interpolating Polynomial here:

https://brainly.com/question/13427238

#SPJ4

Work Shown:

y = (1/2)x+8

2y = 2*( (1/2)x+8 )

2y = x + 16

2y - 16= x

-16= x-2y

x-2y = -16

Side note: I multiplied both sides by 2 in the second step to clear out the fraction.

The answer x-2y = -16 is in standard form Ax+By = C

A = 1, B = -2, C = -16

Hey there!

Hope this helps!

well, we know in 2002 it was 25,056, then it ballooned to 36,720 in 2010, the difference is really 36720-25056 = 11664.

now, if we take 25,056(origin amount) to  be the 100%, what's 11664 off of it in percentage?

[tex]\begin{array}{ccll} amount&\%\\ \cline{1-2} 25056 & 100\\ 11664& x \end{array} \implies \cfrac{25056}{11664}~~=~~\cfrac{100}{x} \\\\\\ \cfrac{ 58 }{ 27 } ~~=~~ \cfrac{ 100 }{ x }\implies 58x=2700\implies x=\cfrac{2700}{58} \implies x\approx \stackrel{\%}{46.55}[/tex]

The Gompertz model of tumor growth is a mathematical model that describes the growth of a tumor over time. It is characterized by two parameters, the intrinsic growth rate (r) and the carrying capacity (K), and is described by the following differential equation:

dn/dt = rn(1 - n/K).where n is the size of the tumor and t is time.

To classify the fixed points of the Gompertz model of tumor growth using linear stability analysis, we first need to find the fixed points by setting dn/dt = 0 and solving for n. The fixed points are the values of n that make the tumor size constant. In this case, the fixed point is n* = K.

Next, we need to linearize the system around the fixed point by using the Jacobian matrix. The Jacobian matrix for the Gompertz model is:
J = [dr/dn, d(rn(1-n/K))/dn]
[-rn(1-n/K)/K, rn(1-n/K)+(r*n/K^2)]

In the Gompertz model, the fixed point is n* = K, and the eigenvalues are -r and r/K, which are both negative. This means that the fixed point is stable, and the tumor size will converge to the carrying capacity K if perturbed.

To learn more about Gompertz Model:

https://brainly.com/question/13720402

https://brainly.com/question/18175560

#SPJ4

The height of the roof will be 10.75 units.

Given is to find the height of the roof.

The upward motion is modelled by the equation -

S = - t² + 3t + 4

The height of the roof is equal to maximum height attained. For the maximum height attained -

dS/dt = 0

d/dt (- t² + 3t + 4) = 0

- 2t + 3 = 0

2t = 3

t = 3/2                                                    .... Eq(1)

The  height of the roof will be -

S(max) = - t² + 3t + 4

S(3/2) = - (3/2)² +(3 x 3/2) + 4

S(3/2) = 9/4 + 9/2 + 4

S(3/2) = 2.25 + 4.5 + 4

S(3/2) = 10.75 units.

Therefore, the height of the roof will be 10.75 units.

To solve more questions on algebraic expressions, visit the link below -

brainly.com/question/1041084

#SPJ1

The area of triangle, using the formula A is 146.9 in^2

Trigonometry is a branch of mathematics that deals with the relationships between the angles and sides of triangles. It can be used to calculate the area of a triangle by using the length of its sides.

The most commonly used formula to calculate the area of a triangle is known as Heron's formula. This formula uses the lengths of the triangle's three sides, known as a, b, and c. Then use the formula A = 1/2 x[tex]\sqrt{(a + b+ c)(-a + b + c)(a - b + c)(a + b -c)}[/tex] to calculate the area of the triangle.

To calculate the area of a triangle using Heron's formula, first measure the length of each side of the triangle. Then use the lengths of the sides to calculate s using the formula above. Once you have calculated s, plug the values for a, b, and c into Heron's formula to calculate the area of the triangle.

A = 1/2ab⋅sin(C)

= 1/2(21 in. )(14 in.)⋅sin(88)

= 1/2(294 in.2 )⋅sin(88)

= 1/2(294 in.2 )⋅0.9945

A = 146.9 [tex]in^{2}[/tex]

To learn more about area of triangle, visit

brainly.com/question/17335144

#SPJ1

Answer: - 4/5x + 1.8

Step-by-step explanation:

"-":  because the slope is negative

"4/5": because its the slope

"x": because it is part of 'mx + b'

"1.8": because it's the y-intercept that fits this equation

Answer:

y = -4/5x + 1.8

Step-by-step explanation:

1st find the slope, m,  using these 2 points:  (-4,5) and (6,-3)

m = (-3-5) / (6--4) = -8/10 = -4/5

Now use the point (-4, 5) in the the point-slope form to find b:

y - 5 = -4/5(x - -4)

y - 5 = -4/5(x + 4)

y - 5 = -4/5x - 16/5

y = -4/5x -16/5 + 25/5 = -4/5x + 9/5

Now write the equation in slope-intercept form:

y = -4/5x + 1.8

The numbers to 3 significant figures are as follows:

0.0230 ≈ 0.0230

0.035 ≈ 0.0350

0.804 ≈ 0.804

3.150 ≈  3.15

140 ≈  140

509 ≈ 509

The eroding rate of the beach in millimetres per day is 0.109 mm per day.

Significant figures are the number of digits in a value. In other words, significant figures are the digits of a number that are important in terms of accuracy and precision.

Therefore, let's find the 3 significant figures of the numbers.

0.0230 ≈ 0.0230

0.035 ≈ 0.0350

0.804 ≈ 0.804

3.150 ≈  3.15

140 ≈  140

509 ≈ 509

A particular beach is eroding at a rate of 4cm per year. Let's convert to millimetres per day.

Therefore,

4 cm = 40 mm

365 days = 40 mm

1 day  = ?

Hence,

eroding rate = 40 / 365 = 0.10958904109 per day

eroding rate = 0.109 mm per day

learn more on significant figure here: https://brainly.com/question/29153641

#SPJ1

In the end, the following is an illustration of a point that cannot appear on the graph of y = f(x): (-7, 1).

Substances and their modifications, equations and surrounding structures, objects and their placements, and locations where they can be found are all included in the study of mathematics. The relationship between a group of inputs, each of which produces related output, is referred to as a "function." A function is a relationship between both inputs and outputs where each input produces a single, unique result. Every function has a domain and a codomain, often known as a scope. F is typically used to denote functions (x). An x is the input. Based on the following criteria, there are four primary categories of functions that are available: on functions, yet another functions, many-to-one functions, within functions, and on functions.

given

The task's purpose makes it clear that the point on the graph of y = f(x) that cannot be found.

The definition of a function, f(x), states that it is a relation that assigns just one value of y to each value of x.

As a result, the statement above suggests that the x-value -7 can only be given one y-value, which is 0, if the point (-7, 0) is on the graph of the function y = f(x).

In the end, the following is an illustration of a point that cannot appear on the graph of y = f(x): (-7, 1).

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

Answer:

(-7, -7) you cannot have the same x

example:

The point (6,0) is on the graph of the function y=f(x) . Which point cannot be on the graph of y=f(x)?

(6, 3)

(4,6)

(3,8)

(4,8)

you cannot choose (6, 3)

Eta-squared is a small effect size that means the difference between the sample of workers with high-stress careers and the general population is statistically significant, but not clinically meaningful.

Eta-squared is a proportion of variation explained by a statistical model or an experimental design. It is used in ANOVA and other types of regression analysis to determine how much of a dependent variable's variation may be attributable to the independent variable (s).

In the given question, Eta-squared is computed by taking the square of the t-value (2.5 in this example) and dividing it by the sum of the t-value and degrees of freedom squares (49 in this case). The result is an eta-squared value of 0.050.

This eta-squared value corresponds to a modest impact size. This suggests that the gap between the sample of high-stress employees and the overall population is minor but statistically significant. In other words, high-stress professionals may sleep less than the general population, but the difference is not significant enough to be clinically significant.

To know more about eta-squared, visit

brainly.com/question/14298919

#SPJ1

The value of this constant, by assuming that the pressure at some reference height y₀ is p₀, is p - p₀ = p.g(y₀ - y).

dp = -pg dy

At height y = y₀ and p = p₀

∫dp = ∫-pg dy

⇒p = -pgy + C        Eqn(1)

Where c is the constant of integration

We know that y = y₀ and p = p₀

⇒p₀ = -pgy₀ + C

⇒C = p₀ + pgy₀

Put the value of C in Eqn(1)

⇒p = -pgy + p₀ + pgy₀

⇒p - p₀ = -pgy + pgy₀

⇒p - p₀ = pg(y₀ - y)

To know more about pressure, here

https://brainly.com/question/30244346

#SPJ4

The entire expression is the product of two terms and 8x+5 is the sum of two terms.

An algebraic expression in mathematics is an expression which is made up of variables and constants, along with algebraic operations (addition, subtraction, etc.). Expressions are made up of terms.

Given here: The expression 4(8x+5)

Evaluating the expression we get 4(8x+5)=32x+20

The entire expression is the product of two factors 4&(8x+5)

Also the expression (8x+5) has two terms and therefore its a binomial

Thus it is the sum of two terms.

Hence, The entire expression is the product of two terms and 8x+5 is the sum of two terms.

Learn more about the algebraic expressions here:

https://brainly.com/question/29159730

#SPJ1

The five number summary of the set of numbers is :

A five number summary is a way to summarize a set of numerical data by providing five key values: the minimum, the first quartile (Q1), the median, the third quartile (Q3), and the maximum.

For the set of numbers 34, 35, 37, 38, 42, 45, and 49, the five number summary would be:

The minimum value is 34, the lowest value in the set.

The first quartile, also known as Q1, is the value that separates the lowest 25% of the data from the rest of the data, which is 37.

The median is the middle value, which is 38.

The third quartile, also known as Q3, is the value that separates the highest 25% of the data from the rest of the data, which is 42.

The maximum value is 49, the highest value in the set.

Find out more on five number summary at https://brainly.com/question/24809873

#SPJ1

There are three terms in the polynomial so each term of the polynomial numerator is separately divided by the same monomial denominator.

What is a monomial ?

Monomial is polynomial in which it has only one term.

Given ,

To find Which property would you use to simplify this monomial division problem.

For example :

4a^3 - 10a^2 + 5a  /  2a

Now the polynomials ( 4a^3 - 10a^2 + 5a) is written as numerator and the monomial (2a) is written as denominator

Therefore,

we get 4a^3 - 10a^2 + 5a  /  2a .

Now we observe that there are three terms in the polynomial so each term of the polynomial numerator is separately divided by the same monomial denominator.

4a^3 / 2a  -  10a^2 / 2a  + 5a/2a

Therefore, there are three terms in the polynomial so each term of the polynomial numerator is separately divided by the same monomial denominator.

To learn more about Monomial from the given link.

https://brainly.com/question/9183135

#SPJ1

For the given image, the value of iota (i) is -i and 1.  

Thus, the development of complex numbers has given rise to imaginary roots. The sign I which stands for Iota, is used to represent -1. (Imaginary number). In essence, I refers to the imaginary component, often known as the iota. I's value is -1. A square root with a negative value represents an imaginary value. Imaginary numbers can be calculated using any of the standard arithmetic operators. An imaginary number has a negative value when squared.

Complex numbers are expressed using the imaginary unit number, where I is defined as imaginary or unit imaginary. Here, we'll go over the chart and principles for imaginary numbers that are employed in mathematical computations.

The value of iota (i²) = -1

The given expressions can be represented in the following way -

i³ = i² × i = -1 × i = -i

i⁸ = i² × i² × i² × i² = -1 × -1 × -1 × -1 = 1

To learn more about iota(i) from given link

https://brainly.com/question/29369374

#SPJ1

If two marbles are drawn at random and not replaced, the probability that two red marbles are drawn is; 1/3

The parameters given for marbles in the bag are;

Number of red marbles = 6

Number of blue marbles = 4

Thus;

Total number of marbles = 6 + 4

Total number of marbles = 10 marbles

Now, probability of first selection being red marble = 6/10

Probability of second marble being red if first was not replaced = 5/9

Thus;

P(first two being red marbles) = (6/10) * (5/9)

= 1/3

Read more about Probability of selection at; https://brainly.com/question/251701

#SPJ1

Answer:

Step-by-step explanation:

2(x-5)=9-3x+6+8+3x+7

2x-10=9-3x+14+3x+7                  {Adding the constant no.s +6 and +8}

2x-10=30-3x+3x                          {Adding all the constants +14 , +7, +9}

2x-10=30-0                                 {+3x and -3x cancels out}

2x-10=30                                    

2x=30-10                              {coefficient with variable i.e 2x on one side}

2x=20                         {20 divides by 2 if we bring coefficient 2 to right side}

x=10 Ans

Answer:

√365 cm

Step-by-step explanation:

We can begin by using the formulas for the area of a rectangle and a square to set up an equation. Let x be the length of the sides of the square that is cut out of each corner of the rectangle.

The area of the original rectangle is 40cm * 89cm = 3560cm^2.

The area of the square that is cut out of each corner is x^2.

The area of the remaining base of the box is 2100cm^2.

So, we have:

3560cm^2 - 4x^2 = 2100cm^2

Solving for x, we get:

x = √(3560cm^2 - 2100cm^2)/4 = √(1460cm^2)/4 =√365cm

So the length of the sides of the square is √365 cm

if i helped you, can you mark my answer as best?

1. The abbreviation for femtogram is - fg.

2. The abbreviation for decimeters is - dm.

3. The abbreviation for microliter is - μL or ul.

4. The abbreviation for femtosecond is - fs.

1. Femtogram (fg): A unit of mass measurement in the International System of Units (SI). It is equal to [tex]10^{-15}[/tex] grams and is commonly used to measure the mass of small particles or atoms.

2. Decimeter (dm): A unit of length measurement in the International System of Units (SI). It is equal to 0.1 meters and is commonly used to measure small distances.

3. Microliter (μL or ul): A unit of volume measurement in the International System of Units (SI). It is equal to [tex]10^{-6}[/tex] liters and is commonly used to measure very small volumes of liquids.

4. Femtosecond (fs): A unit of time measurement in the International System of Units (SI). It is equal to [tex]10^{-15}[/tex] seconds and is commonly used to measure very short periods of time, such as in atomic and molecular physics, chemistry, and photonics.

Read more about Units:

brainly.com/question/141163

#SPJ4

The complete question is -

write the abbreviation for each of the following: match the words in the left column to the appropriate blanks in the sentences on the right. make certain each sentence is complete before submitting your answer.

1. The abbreviation for femtogram is -

2. The abbreviation for decimeter is -

3. The abbreviation for microliter is -

4. The abbreviation for femtosecond is -

Answer:

Step-by-step explanation:

Answer:

.023

.75 X .33=.2475/11=.0225 rounded to .023

Step-by-step explanation:

Sam Is Building A Table for her gaming setup.The Length of the table is .75x.33 if she doubles the length of it then divides it by 11 then what will be the length of the table?Round to the nearest thousandths to solve your problem.

P.S:Mark Me Branlisist

Answer:

-1/2

Step-by-step explanation:

use any difference in Y

divided by the difference in X.

ΔY = 3-2 = 1

ΔX=-4-(-2)=-2

1/(-2) = slope

Answer:

53

a. Graph of equation attached

b.
Domain:
[tex]-\infty \: < x < \infty \:[/tex]
Interval notation: [tex]\left(-\infty \:,\:\infty \:\right)[/tex]

Range:
[tex]f(x) > 1\\\\[/tex]

Interval notation: [tex]\left(1,\:\infty \:\right)[/tex]

c. See explanation below and on attached graph

d. See explanation below

Step-by-step explanation:

53

The function to be used for answering questions is
[tex]f(x) = 8\left(\dfrac{1}{4}\right)^{x+4}+1[/tex]

a. Graph

Graph is plotted using online graphing tool. 2 points identified are (-4, 9) and (-3, 3)

b. Domain and Range

First let's understand what domain and range are

Definition of domain

The domain of a function, y = f(x),  is the set of input(x)  values for which the function is real and defined

The function has no undefined points nor domain constraints.  You can see that the graph goes to infinity for negative and positive x values Therefore,  the domain is :

[tex]-\infty \: < x < \infty \:[/tex]

which can be expressed in interval notation as:

[tex]\left(-\infty \:,\:\infty \:\right)[/tex]

Definition of range

The range of a function y = f(x) is the set of values for y over the domain for which the function is defined

As [tex]x \rightarrow \infty[/tex], [tex]y \rightarrow 1[/tex]

y never quite reaches 0 but its value approaches 1 and therefore the range is
[tex]f(x) > 1\\\\[/tex]

In interval notation:
[tex]\left(1,\:\infty \:\right)[/tex]

c. End Behavior

The end behavior of a function  f(x)  refers to how the function behaves when the variable x  increases or decreases without bound. In other words, the end behavior describes the ultimate trend in the graph of f(x) as [tex]x \rightarrow \pm \infty[/tex]

In this particular function we see that as [tex]x\to \:+\infty \:,\:f\left(x\right)\to \:1\\[/tex]

and as [tex]x\to \:-\infty \:,\:f\left(x\right)\to \:\infty\\[/tex]

d. Point (-3, 3)
By pure chance I chose this point as one of the points asked for in part a because I was looking for integer values I don't think it matters that there is repetition

(-3, 3) is plotted on the graph as point A

3. Evaluate f(-3)
We have
[tex]f(x) = 8\left(\dfrac{1}{4}\right)^{x+4}+1[/tex]

To find f(-3) substitute -3 for x in the above function:

[tex]f(-3) = 8\left(\dfrac{1}{4}\right)^{-3+4}+1\\\\= 8\left(\dfrac{1}{4}\right)^1} + 1\\\\\\= 8\left(\dfrac{1}{4}\right) + 1\\\\= 2 + 1 \\\\= 3[/tex]

So f(-3) = 3

Answer:

a)  See attachment 1.

b)  Domain: (-∞, ∞)

     Range: (1, ∞)

c)  As x → -∞, f(x) → ∞

    As x → ∞, f(x) → 1⁺

d)  See attachment 2.

e)  See below.

Step-by-step explanation:

Given exponential function:

[tex]f(x)=8\left(\dfrac{1}{4}\right)^{x+4}+1[/tex]

To find the y-intercept, input x = 0 and solve for y:

[tex]\implies f(0)=8\left(\dfrac{1}{4}\right)^{0+4}+1[/tex]

[tex]\implies f(0)=8\left(\dfrac{1}{4}\right)^{4}+1[/tex]

[tex]\implies f(0)=8\left(\dfrac{1}{256}\right)+1[/tex]

[tex]\implies f(0)=\dfrac{1}{32}+1[/tex]

[tex]\implies f(0)=\dfrac{33}{32}[/tex]

[tex]\implies f(0)=1.03125[/tex]

Therefore, the y-intercept is (0, 1.03125).

Substitute x = -2 into the function to find a second point on the curve:

[tex]\implies f(-2)=8\left(\dfrac{1}{4}\right)^{-2+4}+1[/tex]

[tex]\implies f(-2)=8\left(\dfrac{1}{4}\right)^{2}+1[/tex]

[tex]\implies f(-2)=8\left(\dfrac{1}{16}\right)+1[/tex]

[tex]\implies f(-2)=\dfrac{1}{2}+1[/tex]

[tex]\implies f(-2)=\dfrac{3}{2}[/tex]

[tex]\implies f(-2)=1.5[/tex]

Therefore, a second point on the curve is (-2, 1.5).

The domain of a function is the set of all possible input values (x-values).  

The domain of the given function is unrestricted:

The range of a function is the set of all possible output values (y-values).

As the exponential part of the function is always positive, the range of the given function is restricted:

As x approaches negative infinity, the function approaches positive infinity:

As x approaches positive infinity, the function approaches f(x) = 1.

See attachment 2.

Substitute x = -3 into the function:

[tex]\implies f(-3)=8\left(\dfrac{1}{4}\right)^{-3+4}+1[/tex]

[tex]\implies f(-3)=8\left(\dfrac{1}{4}\right)^{1}+1[/tex]

[tex]\implies f(-3)=8\left(\dfrac{1}{4}\right)+1[/tex]

[tex]\implies f(-3)=2+1[/tex]

[tex]\implies f(-3)=3[/tex]  

Answer:

31-17=14

Step-by-step explanation:

When you reverse it it equals the same answer

Answer:

31-14=17

Step-by-step explanation:

When We Reverse It,Will Be it Self.

Answer:

[tex]b = P - a - c[/tex]

Step-by-step explanation:

Notice that there are 3 terms on the right hand side. You want to isolate b in order to solve for it.

I find it less confusing to place term containing the variable you want on the left hand side. (As long as it is positive).

[tex]a + b + c = P[/tex]

To isolate b subtract a and c from both sides

[tex]b = P -a - c[/tex]

Answer:

There are several lines of evidence that scientists use to determine the relative age of the Earth and its various features. These include:

Stratigraphy: This refers to the study of rock layers and the sequence in which they were formed. Scientists use stratigraphy to determine the relative ages of different rock layers and the fossils they contain. The principle of superposition states that in any undisturbed sequence of rocks, the oldest rock layers will be at the bottom and the youngest will be at the top.

Fossil record: Fossils are the remains of plants and animals that lived in the past. By studying the fossils in rock layers, scientists can determine the relative ages of different rock formations and the organisms that lived in them. Fossils of extinct species found in lower rock layers are older than those found in higher rock layers.

Radiometric dating: This is a method that uses the decay of radioactive isotopes in minerals to determine the absolute age of rocks and minerals. Scientists can use radiometric dating to determine the age of a rock or mineral, and by comparing the ages of different rocks and minerals, they can determine the relative ages of different rock formations and the Earth's surface features.

a) (PA) P is a tautology because P is logically equivalent to P v F, and P v F is logically equivalent to P.

b) p (pv) is a tautology because p is logically equivalent to p v T, and p v T is logically equivalent to p.

c) p + ( pa) is a tautology because p is logically equivalent to p v F, and p v F is logically equivalent to p v (p v A).

d) (p) - () is a tautology because p is logically equivalent to p v T, and p v T is logically equivalent to p v F.

e) (P+) - P is a tautology because P+ is logically equivalent to P v T, and P v T is logically equivalent to P.

f) (p) is a tautology because p is logically equivalent to p v F, and p v F is logically equivalent to p.

Learn more about logically equivalent here:

https://brainly.com/question/17363213

#SPJ4