when we placed in the container of real depth assuming = d
if the container filled with liquid A then its apparent depth d' = 7cm
so the refractive index nA = real depth / apparent depth
= d/7cm = 0.1428d
if the container filled with liquid B then its apparent depth d' = 6cm
so the refractive index nB = real depth / apparent depth
= d/6cm = 0.166d
if the container filled with liquid C then its apparent depth d' = 5cm
so the refractive index nC = real depth / apparent depth
= d/5cm = 0.2d
Since the refractive index is inversely proportional to the apparent depth
then the refractive indices are nC > nB > nA
give 3 uses of mirrors in everyday life
Answer:
Putting on makeup lol
Driving
Magnification and Science
Photography
Explanation:
I did an extra one if the makeup one wasn't allowed hahah
A cylinder of gas has a frictionless but tightly sealed piston of mass M. A small flame heats the cylinder, causing the piston to slowly move upward. For the gas inside the cylinder, what kind of process is this?
Answer:
isobaric
Explanation:
According to the attached figure, the process would be isobaric as the gas would be expanded at the time when it maintains the constant pressure
The ideal gas law derives
PV = nRT
As the flame is there at the bottom side so atoms or molecules of gas would get heat up slowly also their temperature would be increased. Thus in the case when piston would not be permitted to move so the pressure would rise having maintaining the constant volume and after this the process could be isochronic but in the given case, the piston would be permitted to move slowly upward so that there is a rise in the volume. However, the gas particles would be adjust themselves in order to maintain constant pressure so the given process represent isobaric
____ is the amount of matter an object and the mass of an _____ does not change location.
Answer:
Mass
Object
Explanation:
Answer:
Mass is the amount of matter in an object and the mass of an object does not change location.
What are fossil fuels composed of
Oxygen and carbon
Rocks under extreme pressure
Remains of living things
Answer:
C. Remains of living things
Explanation:
They are made up of dead animals or plants. Coal, Oil, and Natural Gas are the three types of fossil fuels and all of them come from dead organisms. Even the name Fossil Fuels, sounds like a name for something like this.
Hope this Helps ʕ•ᴥ•ʔ
Answer:
C
Explanation:
took the test
Priscilla is driving her car on a busy street and Harvey passes her on his motorcycle. What will happen to the sound from his motorcycle after it passes her car?
A.
The frequency of the sound will decrease.
B.
The amplitude of the sound will increase.
C.
The intensity of the sound will increase.
D.
The wavelength of the sound will decrease.
E.
The velocity of the sound will increase.
What is the equivalent resistance of the circuit pictured below?
Answer:
450 since in series we add the resistance
can someone help? NO LINKS OR IM REPORTING
Answer:
BjsjsjsiisudujdgjkkgywuuuyyyuwuPLEASE HELP! I'LL GIVE BRAINLEST. PLEASE A RIGHT ANSWER
Answer:
The answer is a - is the amount of matter in this object
Explanation:
Which statement is true of a catalyst in a reaction?
A. It acts as a reactant, in place of the original reactant.
B. It gets used up in the reaction.
C. It changes the activation energy required for the reaction.
D. It makes a reaction faster by adding energy.
Answer:
Hello There!!
Explanation:
The answer is=>C. It changes the activation energy required for the reaction.
hope this helps,have a great day!!
~Pinky~
The true statement for a catalyst used in a reaction is that it makes a reaction faster by adding energy. The correct option is D.
What is a catalyst?A catalyst is a substance that increases the chemical reaction rate without undergoing any permanent chemical change in itself. It makes the reaction faster.
The correct option is D.
Learn more about catalyst.
https://brainly.com/question/12260131
#SPJ2
PLEASE HELP! I'LL GIVE BRAINLEST
the answer is the first one
When turning from your path onto a perpendicular path your speed
SHOULD BE at a STEADY
DRIVERS ED PLEASE HELP
Answer: 5-15MPH
Explanation: Trust me
On a part-time job, you are asked to bring a cylindrical iron rod of density 7800 kg/m3 , length 95.0 cm and diameter 2.00 cm from a storage room to a machinist. Calculate the weight of the rod, w. Assume the free-fall acceleration is g
Answer:
[tex]22.84\ \text{N}[/tex]
Explanation:
[tex]\rho[/tex] = Density = [tex]7800\ \text{kg/m}^3[/tex]
h = Length of rod = 95 cm
d = Diameter of rod = 2 cm
r = Radius = [tex]\dfrac{d}{2}=1\ \text{cm}[/tex]
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
V = Volume of rod = [tex]\pi r^2h[/tex]
Mass is given by
[tex]m=V\rho[/tex]
Weight is given by
[tex]w=mg=V\rho g\\\Rightarrow w=\pi r^2h\rho g\\\Rightarrow w=\pi\times (1\times 10^{-2})^2\times (95\times 10^{-2})\times 7800\times 9.81\\\Rightarrow w=22.84\ \text{N}[/tex]
The weight of the rod is [tex]22.84\ \text{N}[/tex].
In an electrical circuit, electrons move from the __________.
A. Negative pole to negative pole B. Negative pole to positive pole
C. Positive pole to positive pole
Answer:
the answer is B from negative pole to positive pole
How could you prove that
through
rock layers in one area match rock layers
found in another area?
Answer:
An unconformity shows where some rock layers have been lost because of erosion. To date rock layers, geologists first give a relative age to a layer of rock at one location and then give the same age to matching layers at other locations. Certain fossils, called index fossils, help geologists match rock layers.
Explanation:
From Coulomb's Law:
Electric force is:
A. directly proportional to distance.
B. inversely proportional to distance.
C. directly proportional to the square of the distance.
D. inversely proportional to the square of the distance.
Answer:
D
Explanation:
Coulomb's law states that the electrical force between two charged objects is directly proportional to the product of the quantity of charge on the objects and inversely proportional to the square of the separation distance between the two objects.
Drag each tile to the correct box.
Adam takes a bus on a school field trip. The bus route is split into the five legs listed in the table. Find the average velocity for each leg of the trip. Then arrange the legs of the trip from highest velocity to lowest.
Leg Distance (km) Time (min)
A 18 9
B 25 15
C 24 8
D 48 12
E 15 7
provides some pertinent background for this problem. A pendulum is constructed from a thin, rigid, and uniform rod with a small sphere attached to the end opposite the pivot. This arrangement is a good approximation to a simple pendulum (period = 0.61 s), because the mass of the sphere (lead) is much greater than the mass of the rod (aluminum). When the sphere is removed, the pendulum no longer is a simple pendulum, but is then a physical pendulum. What is the period of the physical pendulum?
Answer:
the period of the physical pendulum is 0.498 s
Explanation:
Given the data in the question;
[tex]T_{simple[/tex] = 0.61 s
we know that, the relationship between T and angular frequency is;
T = 2π/ω ---------- let this be equation 1
Also, the angular frequency of physical pendulum is;
ω = √(mgL / [tex]I[/tex] ) ------ let this equation 2
where m is mass of pendulum, L is distance between axis of rotation and the center of gravity of rod and [tex]I[/tex] is moment of inertia of rod.
Now, moment of inertia of thin uniform rod D is;
[tex]I[/tex] = [tex]\frac{1}{3}[/tex]mD²
since we were not given the length of the rod but rather the period of the simple pendulum, lets combine this three equations.
we substitute equation 2 into equation 1
we have;
T = 2π/ω OR T = 2π/√(mgL/[tex]I[/tex]) OR T = 2π√([tex]I[/tex]/mgL)
so we can use [tex]I[/tex] = [tex]\frac{1}{3}[/tex]mD² for moment of inertia of the rod
Since center of gravity of the uniform rod lies at the center of rod
so that L = [tex]\frac{1}{2}[/tex]D.
now, substituting these equations, the period becomes;
T = 2π/√([tex]I[/tex]/mgL) OR T = [tex]2\pi \sqrt{\frac{\frac{1}{3}mD^2 }{mg(\frac{1}{2})D } }[/tex] OR T = 2π√(2D/3g ) ----- equation 3
length of rod D is still unknown, so from equation 1 and 2 ( period of pendulum ),
we have;
ω[tex]_{simple[/tex] = 2π/[tex]T_{simple[/tex] OR ω[tex]_{simple[/tex] = √(g/D) OR ω[tex]_{simple[/tex] = 2π√( D/g )
so we simple solve for D/g and insert into equation 3
so we have;
T = √(2/3) × [tex]T_{simple[/tex]
we substitute in value of [tex]T_{simple[/tex]
T = √(2/3) × 0.61 s
T = 0.498 s
Therefore, the period of the physical pendulum is 0.498 s
Two small metallic spheres with equal mass are suspended as pendulums by strings of length L. The sphereshave the same electric charge and come to equilibrium with each string at an angle of Θ = 10.00° with the vertical. What happens if the electric charges are decreased?
A) Θ decrease
B) Θ increase
C) Θ remains the same
D) distant between spheres increases
Answer:
Two small metallic spheres with equal mass are suspended as pendulums by strings of length L. The sphereshave the same electric charge and come to equilibrium with each string at an angle of Θ = 10.00° with the vertical. What happens if the electric charges are decreased?(D)
Explanation:
please click the heart and rate excellent and brainleist to ❤☺️☻♨️♨️☻☺️❤
Sound is a longitudinal wave that travels at speed 343343m/s in dry air at room temperature and standard pressure. Your ear is capable of differentiating sounds that arrive at the ear just 1.00 milliseconds apart. What is the minimum distance between two speakers that produce sounds that arrive at noticeably different times
Answer:
d = 0.343 m
Explanation:
Given that,
The speed of a longitudinal wave, v = 343 m/s
Your ear is capable of differentiating sounds that arrive at the ear just 1.00 milliseconds apart.
We need to find the minimum distance between two speakers that produce sounds that arrive at noticeably different times.
Let the distance be d. So,
[tex]d=v\times t\\\\=343\times 10^{-3}\\\\=0.343\ m[/tex]
So, the required distance is equal to 0.343 m.
Use the simulation to determine the relationship between the distance from the magnet and the strength of the magnetic field at that point. Use a ruler to measure distance on the screen. Use a power fit to determine the B vs. r relationship for each location. To simplify your data collection, chose a data-collection axis where either Bx or By = 0. Measure the distance from the nearest edge of the magnet. You will need to obtain a ruler for collecting data.
Explanation:
give me more detail and i well help you out
How far are two protons if they exert a force of 0.5 N on one another?
Answer:
5.08 metres
Explanation:
The both protons should be 5.08 meters apart so that force between them is equal to the weight of electron
The two protons will exert a repulsive force of 0.5 N when they are at a distance of [tex]2.146625 \times10^{-14} \,m[/tex] away from each other.
As protons have very little mass the gravitational force will be negligible. So here we will consider the electrostatic force between them.
According to Coulomb's law in electrostatics, the electrostatic force between two charges can be given by;[tex]F=k\frac{q_{1}q_{2} }{r^2}[/tex]Where [tex]k \approx 9 \times 10^9 \, Nm^2 /C^2[/tex]Here, since both the particles are protons;[tex]q_1 = q_2 = 1.6 \times 10^{-19}\,C[/tex]Given that F = 0.5 NSubstituting the known values in the Coulomb's law equation, we get;[tex]0.5\, N = 9\times 10^{9} Nm^2 /C^2 \times\frac{(1.6\times 10^{-19}\,C)\times(1.6\times 10^{-19}\,C)}{r^2}[/tex]
ie; [tex]r= \sqrt{9\times 10^{9} Nm^2 /C^2 \times\frac{(1.6\times 10^{-19}\,C)\times(1.6\times 10^{-19}\,C)}{0.5\, N} } = 2.146625 \times 10^{-14}\,m[/tex]
Learn more about Coulomb's Law here:
https://brainly.com/question/1698562
Quia
Active
16:05:5
A plant root is an example of
Answer:A plant root is an example of an organ
Explanation:The main function of the root is to collect nutrients and water from the soil.
Answer:
hi sorry i just want points YOSHIII :3
Explanation:
an example of a household appliance with a low and high power rating
Answer:
Explanation:
There are countless household appliances in every single house. One appliance with a low power rating would be a ceiling fan. On average ceiling fans consume roughly 60w and are found in the majority of houses. On the other side of the spectrum, we have a high power-rating appliance such as a microwave. Microwaves use anywhere between 1000w to 1800w of power in order to function correctly. This is very large power consumption and one of the highest power ratings found for appliances in a household.
As the Moon revolves around the Earth, it also rotates on its axis. Why is it that the same side of the Moon is always visible from Earth?
Answer: The speed of the moon's rotation keeps the same side always facing Earth.
Explanation: Please mark me brainiest
Answer:
The speed of the Moon's rotation keeps the same side always facing Earth.
Explanation:
got it right on study island :)
The speed of light is 3 x 10 m/s.
Calculate the frequency of light that is absorbed the most by the 100m length of fibre.
Give your answer in standard form.
Answer:
[tex]3 \times 10 {}^6[/tex]
The data points you have taken on your lab graphs roughly form a straight line. How do you interpret the slope of this line?
Steeper slopes mean higher speeds.
Steeper slopes mean lower speeds.
Steeper slopes mean higher error.
Steeper slopes mean lower error.
The slope has no relation to speed or error
Answer: Steeper slopes mean lower speeds.
Explanation:
1: Which person is not doing work?
O A. A person climbing a hill
O B. Someone climbing stairs
O C. A person lifting a bag of sand
O D. A person holding a baby
Answer:
D
Explanation:
16. Using the formula P = V x I, find the amount of power flowing through a circuit carrying a current of 20 amperes at a potential difference of 120 volts.
O A 2400 Watts
B. 6 Watts
C. 1200 Watts
D. 24 Watts
A child is pushing a merry-go-round. The angle through which the merry-go-round has turned varies with time according to θ(t)=γt+βt3θ(t)=γt+βt3, where γ=γ= 0.450 rad/srad/s and β=β= 1.10×10−2 rad/s3rad/s3. Part A Calculate the angular velocity of the merry-go-round as a function of time. Express your answer in terms of the variables ββ, γγ, and tt. ωz(t)ωz(t) = nothing rad/srad/s SubmitRequest Answer Part B What is the initial value of the angular velocity? ωzωz = nothing rad/srad/s SubmitRequest Answer Part C Calculate the instantaneous value of the angular velocity ωzωz at t=t= 5.25 ss . ωzωz = nothing rad/srad/s SubmitRequest Answer Part D Calculate the average angular velocity ωav−zωav−z for the time interval t=0t=0 to t=t= 5.25 ss .
Answer:
hufiui
fihgpfghlfikgergkfkjhfkhjgkffhhh
Explanation:
jjgzgcjxhgygueyuufhfugkhkckgijljhgxjgjgffhgkgjxhxjgjcjckvjgghkhkgjgjfhfhfhffrusufsflslrsyfhldufñlñudtoqdyhjjxkgsgjfktwlyfñujxjxhlxlhdktstedoyñfuyñflldytidoyeyljjcñcjluffñui5woyepurñfuñufldyrajuñdlydstdyñudñydktshñxjcñydiw5uñfitwoyeoyeñufñfuñifjñufhlsyñeifññydoysitaiwtuñdyñdlsyltslsyoyeylsuñdñjjcyldlyslatlysñudidñjdñfjñjjxlhsmzhmzjjdjdlhdñhjdñjdñjddñhflhuñfhxltkds4urayraylraluarularuñstuñtsuñtsultsuñtsuñstñitsñktssistustlulsrustlularyralultalutslutajltsñgskjlgzljg?g o uguhxputxipyfugxiñhxiñhfuñdguldthgksjmgdjmgkhdjlgdjlgd
pduoyditsyafylrayoraourauptautospustistiptsñitsñitsñitsiptsiteitdustuñtsuñtsñitwiñstñitwñitsñstuuñrsoursurosoustjlsrlutejlgsjlstjfsjlgsultsjgzjñgsññkdylfhkñdgjlfshkadmjgsuñstñkydñkydñiykdhiñstñitsuñtsisñtñtieñietñietñiteñiwtñitskñgsiñteuñwrkñsturaluglsuñtwjlfalfjalhadoyfutdllgdñitswtkgsñktjrajtsurwñwñutiñtsiwñtuwñturqlñitwualtayoryarluarlietite
PLEASE HELP MEE PLEASE!
Answer;
gram
Explanation