When light is incident through the focal point, and then strikes a mirror, ___ the light will reflect parallel to the principal axis the light will reflect back through the focal point the light will not reflect at all
When light is incident through the focal point and allow to strike a mirror, the light will be reflected back parallel to the principal axis.
What is reflection of light?The reflection of light occurs when all the incident light falls back when it hit a plane surface like mirror. In this process the light will be thrown back by the mirror without absorbing it.
Reflection of light when it strikes a mirrorWhen light is incident through the focal point and allow to strike a mirror, the light will be reflected back parallel to the principal axis.
Thus, the incident light will reflect parallel to the principal axis.
Learn more about reflection of light here: https://brainly.com/question/7198250
Use this sentence: A large tray is filled with flour and a fan is turned on so that it blows wind across the top.
Which natural process is this modeling?
(1 point)
physical weathering (i picked this)
chemical weathering
erosion
deposition
Answer: Physical weathering
Explanation:
what does odometer of a vehicle measure ?
Answer:
The odometer registers the distance traveled by the vehicle; it consists of a train of gears (with a gear ratio of 1,000:1) that causes a drum, graduated in 10ths of a mile or kilometre, to make one turn per mile or kilometre.
Explanation:
hope it helps
a girl of whose mass is 50kg carries a box of mass 20kg high.she take 16s to climb up the steps (take g=10m/s^2). what is her weight?
Explanation:
[tex]w = m.g[/tex]
[tex]m =70 \\ g = 10[/tex]
70x10=700N
an object is being pulled along the ground by a force of 75N directed 28° above horizontal how much work does the force do in pulling the object to 8.5 m
Answer:
(75)(8.5)cos(28)=562.879J
Explanation:
W=Fdcos(theta)
A ballon is rubbed against a sweater. Which of the following describes the result of this interaction?
Answer:
static could form and The balloon becomes positively charged
Explanation:
Science
After rubbing a balloon on your shirt, your hair sticks up when the balloon is near your head. Explain how tiny particles on you and the balloon can make your hair stand up. (1 point) Protons are transferred from your body to the balloon. This gives you a negative charge and the balloon a positive charge. The opposite charges attract. Electrons are transferred from your body to the balloon. This gives you and the balloon a negative charge. The like charges attract. Electrons are transferred from your body to the balloon. This gives you a positive charge and the balloon a negative charge. The opposite charges attract. Electrons are transferred from your body to the balloon. This gives you a negative charge and the balloon a positive charge. The opposite charges attract.
Consider a proton travelling due west at a velocity of 5×10^5m/s. Assuming that the rth magnetic field has a strength of 5x10^-5Tand is directed due south calculate li) the magnitude of the force on the proton (q= 1.6x10^-9C)
Answer:
Consider a proton travelling due west at a velocity of 5×10^5m/s. Assuming that the rth magnetic field has a strength of 5x10^-5Tand is directed due south calculate li) the magnitude of the force on the proton (q= 1.6x10^-9C)
Explanation:
What is the change in the momentum of a 1,600 kg car if its
velocity goes from 20 m/s to O m/s?
a -32,000 kg.m/s
b 32,000 kg-m/s
C 16,000 kg.m/s
d -20 m/s ka.m/s
Answer:
As Per Provided Information
Mass of car is 1600 Kg Initial velocity 20 m/sFinal velocity 0m/swe have been asked to determine the change in momentum .
Formula Used
[tex] \bf\Delta \: p = m \: \times \Delta \:v[/tex]
Put the given value we obtain
[tex] \rm \qquad \dashrightarrow \Delta \: p \: = 1600 \times (0 - 20) \\ \\ \\ \rm \qquad \dashrightarrow \Delta \: p \: = 1600 \times ( - 20) \\ \\ \\ \rm \qquad \dashrightarrow \Delta \: p \: = - 32000 \: kgm {s}^{ - 1} [/tex]
Hence,
Change in momentum is -32000Kgm/s .So, correct option is (a) -32000 Kgm/s.
The change in the momentum of a 1,600 kg car if its velocity goes from 20 m/s to O m/s is -32000 Kg-m/s.
What is Momentum?The meaning of MOMENTUM is a property of a moving body that the body has by virtue of its mass and motion and that is equal to the product of the body's mass and velocity. Momentum is vector quantity.
Given in the question
Mass of car is 1600 Kg
Initial velocity 20 m/s
Final velocity 0 m/s
we have been asked to determine the change in momentum
Momentum = mass*(change in velocity)
= 1600(0 - 20)
= -32000 Kg-m/s
The change in the momentum of a 1,600 kg car if its velocity goes from 20 m/s to O m/s is -32000 Kg-m/s.
To learn more about momentum refer to the link:
brainly.com/question/24030570
#SPJ5
What will happen to this force if the distance between the charges is doubled and the -4μC is cut in half ? Use proportional reasoning to find the answer and then check by changing and moving the charges.
Answer: MIS huevos
Explanation:
my sources
what is the force in kN of work done is 1.2 ms moves through 120m
Answer:
work done = force x distance
1.2 = f x 120
1.2 = 120f
f = 0.01N
hope its helps!
Please answer this question. Thank you and have a fruitful day.
#Up
The upward force is caused by floating equipments attached below in ship to make it float.
#Down
Weight or acceleration due to gravity
F=mg#Right
The drag force or friction from water surface#Left
Force of motor to go ahead
Which of the following is correct when convection occurs in the atmosphere?
A
Cool air rises and warm air sinks.
B
Cool air sinks and warm air rises.
C
Cool and warm air sink.
D
Cool and warm air rise.
Answer:
Cool air sinks and warm air rises.
Explanation:
build three straight ramps on the stage one ramp should be nearly flat and another should be extremely steep the last ramp should have a steepness somewhere in between
Answer:
hope this helps
Explanation:
The ramps to be constructed are straight ramps. So, their lengths must be straight.
What is meant by an incline ?An incline or inclined plane is defined as a plane or flat surface that is tilted at a particular angle and the incline have one end higher than other.
Here,
The inclined plane or a ramp can be considered as a simple machine used for raising heavy objects through its steeper surface.
Three ramps are to be constructed that are having the configurations of straight run such that one of them should be constructed nearly flat.
The other one is to be constructed in a way that its slopping surface must be extremely steeper.
The last one is constructed such that the sloping surface have a steepness somewhere in between the other two.
Since the ramps to be constructed are straight ramps, their lengths must be straight.
Hence,
The ramps to be constructed are straight ramps. So, their lengths must be straight.
To learn more about incline, click:
https://brainly.com/question/14983337
#SPJ3
Attaching the image here
A 6.0 x10^-2 kg tennis ball moves at a velocity of 12 m/s. The ball is struck by a racket, causing it to rebound in the opposite direction at a speed of 18 m/s. What is the change in the ball’s momentum?
Δp = m(v₂-v₁)
v₁ = 12 m/s
v₂ opposite direction = - (negative sign) = -18 m/s
Δp = 6.10⁻² (-18-12)
Δp = -1.8 Ns
What are the first three harmonics of a note produced on a 0.31 m long violin string if the waves on this string have a speed of 274.4 M/s. what is the length of the pipe
Behavioral responses in organisms require communication between
The moon remains in Earth's orbit because of Earth's gravitational pull on the moon. In return, the moon exerts a gravitational pull on Earth. The mass of the moon is 0.07346 x 1024 kg and Earth's mass is 5.9724 x 1024 kg. How does the gravitational pull of Earth on the moon compare to the moon's gravitational pull on Earth?
A. Earth pulls more strongly on the moon.
B. The moon pulls more strongly on Earth.
C. The moon and Earth pull on each other with equal force.
D. There is not enough information to answer this question.
Given what we know, we can confirm that the Earth pulls more strongly on the moon, option A is correct.
Why does the Earth pull more strongly?This has to do with the relationship between the mass of an object and its gravitational pull. These values are directly proportional, the more massive an object is, the stronger the gravitational pull that object exhibits. The moon does pull on the Earth as well, however, due to its smaller mass, it does not pull as strongly as the Earth on the moon.
Therefore, we can confirm that the Earth pulls more strongly on the moon, which means that option A is the correct choice for this question.
To learn more about gravity visit:
https://brainly.com/question/1479537?referrer=searchResults
an immersion heater rated 2.0A,240V is used to boil water from temperature 52°c to hundred°c. if the mass of the water is 2.5kg, determine the time taken to boil water
Answer:
1.05 x 103s
Explanation:
The answer to the question is 1.05 x 103s
while flying to Tucson, Mr H's plane experiences mild turbulence, causing the coffee to oscillate back and forth in his cup 4 times each second. if the coffee waves have a wavelength of 0.1m, what is their velocity across the surface?
This question involves the concepts of wavelength, frequency, and velocity.
The velocity across the surface is "0.4 m/s".
Wave SpeedThe velocity of the wave can be found using the following formula:
[tex]v=f\lambda[/tex]
where,
v = velocity = ?f = frequency = 4 Hzλ = wavelength = 0.1 mTherefore,
v = (4 Hz)(0.1 m)
v = 0.4 m/s
Learn more about wavelength here:
https://brainly.com/question/7143261
A 3rd harmonic is being produced in a tube that is open at both ends. The tube is 3 meters long and
the speed of sound is 340 m/s. What frequency will an observer hear?
The frequency of the second harmonic is 880 Hz (a pitch of A5). The speed of sound through the pipe is 350 m/sec. Find the frequency of the first harmonic and the length of the pipe. The length of an air column is related mathematically to the wavelength of the wave which resonates within it.
Driving in your car with a constant speed v
v
, you encounter a bump in the road that has a circular cross section, as indicated in the figure(Figure 1). The radius of curvature of the bump is 35 m.
At what speed must you go over the bump if people in your car are to feel "weightless"?
The speed you must go over the bump if people in your car are to feel "weightless" is 18.52 m/s.
What is weightlessness?Weightlessness is the complete or near-complete absence of the sensation of weight. In this situation, the downward acceleration is equal to acceleration due to gravity.
a = g
v²/r = g
v² = rg
v = √rg
where;
v is the maximum speed you must applyr is the radius of the curveg is acceleration due to gravityv = √(35 x 9.8)
v = 18.52 m/s
Thus, the speed you must go over the bump if people in your car are to feel "weightless" is 18.52 m/s.
Learn more about weightlessness here: https://brainly.com/question/17067422
You want to build a generator to light a bulb. You have a fairly large permanent magnet, some wire, and a lightbulb. You may build it as follows. Wind the wire for about 200 turns into a coil of 15 cm radius. Tape up the coil and place it in the region between the poles of the magnet that produces a 0.10 T magnetic field. Connect a hand crank to the coil and rotate it at a rotational speed ω.
What is the required rotational speed ω to generate a peak voltage of 6 V?
The required rotational speed ω to generate a peak voltage of 6 V is 4.24 rad/s
The induced peak voltageThe induced peak voltage in the generator is given by ε = NABω where
N = number of turns of coil = 200, A = area of coil = πr² where r = radius of coil = 15 cm = 0.15 m, B = magnetic field strength = 0.10 T and ω = rotational speed of coilRotational speed
Making ω subject of the formula, we have
ω = ε/NAB
ω = ε/Nπr²B
Substituting the values of the variables into the equation, we have, given that ε = 6 V
ω = ε/Nπr²B
ω = 6 V/(200 turns × π(0.15 m)² × 0.10 T)
ω = 6 V/(200 turns × 0.0225π m² × 0.10 T)
ω = 6 V/(200 turns × 0.0225π m² × 0.10 T)
ω = 6 V/0.45π turns-m²T
ω = 6 V/1.4137 turns-m²T
ω = 4.244 rad/s
ω ≅ 4.24 rad/s
The required rotational speed ω to generate a peak voltage of 6 V is 4.24 rad/s
Learn more about induced peak voltage here:
https://brainly.com/question/25748903
A very long line of charge with charge per unit length +8.00 μC/m is on the x-axis and its midpoint is at x = 0. A second very long line of charge with charge per unit length -4.00 μC/m is parallel to the x-axis at y = 14.0 cm and its midpoint is also at x = 0.
At what point on the y -axis is the resultant electric field of the two lines of charge equal to zero?
The point on the y -axis in which the resultant electric field of the two lines of charge equal to zero is 5.5 cm.
Electric field due to each line
The electric field due to each line is calculated as follows;
[tex]E = \frac{kq}{r^2}[/tex]
where;
q is charge r is the distancek is Coulomb's constantIn the question, we were given charge per unit length instead of charge.
Since the midpoint of two lines are same, can assume that they are equal.
Hence, the total charge in each line will be;
q1 = q1Lq2 = q2LAt a zero resultant electric field;
[tex]E_1 = E_2\\\\E_1 + E_2 = 0\\\\\frac{kq_1}{r_1^2} = \frac{kq_2}{r_2^2}[/tex]
Let the position on y p axis = n
[tex]\frac{K (8 \ \mu C/L)\times L}{(n - 0)^2} + \frac{K(-4\ \mu C/L) \times L}{(0.14 - n)^2} = 0\\\\\frac{K(8\mu C)}{(n)^2} - \frac{K(4\mu C)}{(0.14- n)^2} = 0\\\\\frac{K(8\mu C)}{(n)^2} = \frac{K(4\mu C)}{(0.14- n)^2} \\\\\frac{8}{n^2} = \frac{4}{(0.14 - n)^2} \\\\4n^2 = 8(0.14 - n)^2\\\\4n^2 = 8(0.02 -0.28n - n^2) \\\\4n^2 = 0.16 - 2.24 n - 8n^2\\\\ 12n^2+ 2.24n - 0.16 = 0\\\\a = 12, \ b = 2.24, \ c = -0.16\\\\n = \frac{-b \pm \sqrt{b^2 - 4ac} }{2a} \\\\[/tex]
[tex]n = \frac{-2.24\pm \sqrt{(2.24)^2 - 4(12)(-0.16)} }{2(12)} \\\\n = 0.055 \ m\\\\n = 5.5 \ cm[/tex]
Thus, the point on the y -axis in which the resultant electric field of the two lines of charge equal to zero is 5.5 cm.
Learn more about electric field here:https://brainly.com/question/14372859
Which statement best describes what happens when people declare bankruptcy?
1. Some of their debts can be eliminated, and loan terms are renegotiated with lenders.
2. All of their debts are eliminated, and they are given a fresh start.
3. All of their debts are eliminated, but they have to sell their assets, such as their homes.
4. Some of their debts can be eliminated, but they must agree not to take on more debt.
1. Some of their debts can be eliminated, and loan terms are renegotiated with lenders.
2. All of their debts are eliminated, and they are given a fresh start.
3. All of their debts are eliminated, but they have to sell their assets, such as their homes.
D took the test UWU
The statement is all of their debts are eliminated, but they have to sell their assets, such as their homes. Option (c) is correct.
What is bankruptcy?During the legal process of bankruptcy, individuals or other entities that are unable to pay their creditors back can seek partial or complete relief from their debts. Bankruptcy is typically imposed by a court order that is frequently requested by the debtor.
An opportunity to start all over is provided through bankruptcy by wiping off uncontrollable debts. In the meanwhile, creditors may be able to receive some payment based on the person or company's liquidate assets.
Declaring bankruptcy should help the economy as a whole by giving individuals and business organizations another chance to recover financially. It may also assist persons in recovering some loan repayment.
Therefore, Option (c) is correct.
Learn more about bankruptcy, here;
https://brainly.com/question/1142634
#SPJ6
N2O is the chemical formula of a covalent compound used in the production of whipping cream. The elements that
make up this compound are nitrogen and oxygen.
What is the name of the second element in the chemical name of this compound?
N₂O: Nitrous oxide
oxygen
The graph represents the force applied on an 3.00kg crate while it moved 5.0m. A. How much total work is done on the crate? B. If the ball was moving at 6.00m/s when the force was first applied, what is its final velocity?
a. We can calculate the amount of work by calculating the area under the graph.
first area (rectangular): 2.5 x 6 = 15
second area(trapezoid): 1/2 x (6+10) x 2.5 =20
total work done: 35 J
b. the force was first applied = 6 N
F = m.a
a = 6 : 3 = 2 m/s²
vf²=vi²+2as
vf²=6²+2.2.5
vf²=56
vf=7.5 m/s
Following extinction , when the conditioned response (cr) gains strength again , we say it has been
A. Generalized
B. Discriminated
C. Spontaneously recovered
D. Initially inhibited
Answer:
C. Spontaneously covered
Explanation:
The diagrams show four bodies moving in the directions shown. The only forces acting on the bodies are shown in each diagram.
Which body gains the most kinetic energy when moving a distance of 1.0m ?
Answer:
C - the greatest net force is on c with 25N - 10N = 15N
a = F / M
a = (v2 - v1) / t so C has the greatest acceleration and will reach the greatest velocity
KE = 1/2 M v^2
The diagrams show four bodies moving in the directions shown. The only forces acting on the bodies are shown in each diagram. The option C body gains the most kinetic energy when moving a distance of 1.0m.
What is kinetic energy?When some amount of force is applied on a object it can store a energy in that object. That is the kinetic energy. Mathematically the mass of the object and its change in acceleration in that object makes the kinetic energy. It is a vector quantity.
How can we calculate the kinetic energy?
To calculate the kinetic energy we are using the formula,
U= (1/2)mv²
U = (1/2) ma²t²
Or, U= (1/2)ma × at²
Or, U= F × (1/2)at²
From this calculation we can see that if there is more force applied on a body that generates more kinetic energy on that object.
According to the question ,
Force of the object of Option A has (F) = f₂ - f₁
= (20 - 10)
= 10N
Force of the object of Option B has (F) = 10N
Force of the object of Option C has (F) = f₂ - f₁
=(25-10)= 15N
Force of the object of Option D has (F) = f₂ - f₁
= (30-30)
= 0N
According to the question, option C has the most amount of force and we know the more force generate the more kinetic energy. So it has the more kinetic energy.
We can easily say that, The option C body gains the most kinetic energy when moving a distance of 1.0m
Learn more about kinetic energy:
https://brainly.com/question/8101588
#SPJ2
which of these will NOT help reduce c02 levels in the atmosphere?
Answer:
the answer would be "using more heat" btw
Explanation: