5 10 points Sanzida conducted an experiment that required a wire carrying a current to be wrapped around a metal core. When she placed th metal rod, she observed the magnet move toward the rod. Which conclusion can Sanzida draw from this experiment? O The current in the wire has created a gravitational field with its south pole at the top of the rod. The current in the wire has created a magnetic field with its south pole at the top of the rod. The current in the wire has created a magnetic field with its north pole at the top of the rod. The current in the wire has created a gravitational field with its north pole at the top of the rod.​

Answer: hope it helps you....

Answer: C

Explanation:

Resistors R1, R2 and R3 are in  parallel so

1/R1 + 1/R2 + 1/R3 = 1 ohm

adding Resistor 'R' make it 2ohm + 1 ohm = 3 ohm

Whereas for current use formula I = V/R

Answer:

Zeros that follow non-zero numbers and are also to the right of a decimal point are significant.

Explanation:

For example:

0.300 has 3 significant figures.

5.400 has 4 significant figures.

‎ㅤ➙ Mechanical Advantage= 1.5

Mechanical advantage allow to perform tasks much easier in terms of the force needed to apply, but must always obey the conservation of energy. Mechanical advantage is the measure of the ratio of output force to input force needed in a system, used to analysis the force in simple machines like livers and pulleys.

Mechanical advantage is given by:

[tex] \qquad\hookrightarrow\quad {\pmb{\sf{MA =\dfrac{Load}{effort} }} }[/tex]

We are provided with:

Therefore,

[tex] :\implies\quad \sf{MA = \dfrac{L}{E} }[/tex]

[tex] :\implies\quad \sf{ MA = \dfrac{6\cancel{00}}{4\cancel{00}}}[/tex]

[tex] :\implies\quad \sf{MA=\dfrac{6}{4} }[/tex]

[tex]: \implies\quad \sf{ MA =\dfrac{3}{2}}[/tex]

[tex]: \implies\quad\underline{\underline{\pmb{ \sf{ MA = 1.5}}}}[/tex]

‎ㅤ‎ㅤ‎ ‎ㅤ‎ㅤ‎~Hence, the mechanical advantage is 1.5

Question :-

Answer :-

[tex] \rule {180pt} {2pt} [/tex]

Given :-

To Find :-

Solution :-

As per the provided information in the given question, the Load is given 600 N . Effort is given as 400 N . And, we have been asked to calculate the Mechanical Advantage .

For calculating the Mechanical Advantage , we will use the Formula :-

[tex] \bigstar \: \: \boxed{ \sf{ \: Mechanical \: Advantage \: = \: \dfrac{Load}{Effort} \: }} [/tex]

Therefore , by Substituting the given values in the above Formula :-

[tex] \dag \: \: \sf{Mechanical \: Advantage \: = \: \dfrac{Load}{Effort} } \\ [/tex]

[tex] \longmapsto \: \: \sf{Mechanical \: Advantage \: = \: \dfrac{600}{400} } \\ [/tex]

[tex] \longmapsto \: \: \sf{Mechanical \: Advantage \: = \: \dfrac{6}{4} } \\ [/tex]

[tex] \longmapsto \: \: \sf{Mechanical \: Advantage \: = \: \dfrac{3}{2} } \\ [/tex]

[tex] \longmapsto \:\textbf{ \textsf{Mechanical Advantage = 1.5}} \\ [/tex]

Hence :-

[tex] \underline {\rule {180pt} {4pt}} [/tex]

Explanation:

Answer:

Conduction, convection or radiation

Explanation:

Hope I could help. If you need more detail about one type, then coment below

Here is your Answer:-

Heat flow relies heavily on the concept of conduction. Basically, the transfer of the heat energy relies on free electron diffusion. In order for the heat to move from one object or material to another, adjacent atoms vibrate against each other. This is caused by the electrons moving from one atom to another.

Answer:

In energy terms, electrical potential energy in the battery is converted into kinetic energy of moving electrons.

Explanation:

Answer:

It is Force

Explanation:

A Force is a push or pull upon an object resulting from the objects interaction with another object.

Answer:

the reflection of the candle in the concave mirror formed upside down real image that is diminished

In order to properly configure the smart light bulbs, buyers should read the installation and configuration manual before connecting or using them to avoid possible damage due to improper handling.

The user manual is a tool that is usually included when we buy a product. This manual includes all the characteristics of the object that we have purchased and the recommendations and specifications for correct use and maintenance to prolong its useful life.

According to the above, what the common buyer should do to prevent their bulbs from being damaged and to be able to configure them properly is to read the user manual.

Learn more about user manual in: https://brainly.com/question/7222970

Answer:

As a result, if the field lines are close together (that is, the field line density is greater), this indicates that the magnitude of the field is large at that point. If the field lines are far apart at the cross-section, this indicates the magnitude of the field is small. (Figure) shows the idea.

Explanation:

Answer:

Light gathering power is related to the area of the lens aperature:

Aa / Ab = (15 / 5)^2 = 9       since the area of an aperature is  proportional to the square of the radius

Answer:

Condensation is your answer

Explanation:

Condensation is the process of steam rising back into the atmosphere and the steam would be the evaporation "steam" hope this helped

Steam rising from the boiling water causes the whistle sound, which means that the convection part of the water cycle is present here.

The process of convection entails the movement of a heated fluid, such as air or water, in order to transfer heat.

Convection is caused by the fact that most fluids have a tendency to expand when heated, which causes them to become less dense and rise due to the increased buoyancy. The homogeneous heating of air in a heated room or water in a kettle is due to circulation generated by this effect: heated particles expand the area they move in by moving faster against each other, rise, and afterwards cool and close again, increasing density and causing a corresponding sinking.

In forced convection, fluid is carried using mechanisms other than those that result from differences in density with temperature. Examples of forced convection include the air movement by a fan or water by a pump.

To know more about convection :

https://brainly.com/question/16635311

#SPJ5

[tex][Hello,BrainlyUser][/tex]

Answer:

False

Explanation:

Some places are more endowed than others.For example, some regions have lots of water (ocean and seas). While others have lots of minerals and forestlands. In addition, other have metallic rocks, wildlife, fossil fuels, and so on. Thus, we can conclude that Natural resources are not evenly distributes across the world.

[CloudBreeze]

Natural resources are evenly distributed across the world

O True

O False ✓

Some natural hazards are preceded by geologic activities that allow for reliable predictions; other natural hazards occur suddenly, with no notice, and are not yet predictable.

There are some disasters that can be predicted like tornadoes, tsunamis etc.. But some hazards like earthquake cannot be predicted. Still the technology has not developed so much that it could predict earthquakes...~

Answer:

True

Explanation:

Answer:

v = 20 m/s

Explanation:

Let's use v = u + at for uniform acceleration.

v = finaly velocity

u = initial velocity

a = acceleration

t = time

Since we start from rest, our initial velocity is zero.

[tex]v = 0 + 4(5)[/tex]

[tex]v = 20 m/s[/tex]

Answer:

In short, a force applied to an object at rest causes it to accelerate in the direction of the force.

Explanation:

Newton's second law says that when a constant force acts on a massive body, it causes it to accelerate, i.e. to change its velocity, at a constant rate.

Answer:

As the force acting upon an object is increased, the acceleration of the object is increased.

Explanation:

The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object.

Answer:

pacific and Australian

Explanation:

a covergent boundary is when to plates move towards eachother and the arrows show that the arrows are facing each other

Answer:

Pacific and Australian

Explanation:

Convergent boundaries are where two plates come together. Either tall mountains are formed on land or deep trenches in the ocean. There are deep ocean trenches where the Pacific and Australian plate converge.

The normal force of the ground on the skater depends on the skater's weight.

This is the upward force on an object usually exerted by the ground due to the weight of the object acting downwards.

The net vertical force on the skater is zero.

W - Fₙ = 0

W = Fₙ

where;

The normal force of the skater is equal to the weight of the skater acting downwards.

Thus, the normal force of the ground on the skater depends on the skater's weight.

Learn more about normal force here: https://brainly.com/question/14486416

[tex]\tt \dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\\V_2=\dfrac{P_1V_1T_2}{P_2T_1}=\dfrac{P_1V_12T_1}{2P_1T_1}=V_1[/tex]

they have oscillating electric and magnetic fields

The velocity of the wave having a frequency of 458 Hz and a wavelength of 0.74 m is 338.92 m/s

The velocity of a wave is related to its frequency and wavelength according to the following equation:

Velocity (v) = wavelength (λ) × frequency (f)

v = λf

v = λf

v = 0.74 × 458

v = 338.92 m/s

Thus, the velocity of the wave is 338.92 m/s

Learn more about wave:

https://brainly.com/question/14630790

The effects of gravity if we were dropped out in space is the feeling of weightlessness.

This is defined as the universal force of attraction acting between all matter.

In space, there is no ground to push against astronauts hence the feeling of weightlessness by the astronauts which was why it was chosen as the nost appropriate choice.

Read more about Gravity here https://brainly.com/question/72250

According to Jean Piaget, unrealistic idealism often occurs in adolescence as a result of egocentrism. The inability to distinguish between self and others is referred to as egocentrism.

The inability to distinguish between self and others is referred to as egocentrism. It is, more precisely, the incapacity to effectively assume or comprehend any viewpoint other than one's own.

Egocentrism may be present in every stage of life, including childhood, adolescence, and maturity.

Hence option B is correct. According to Jean Piaget, unrealistic idealism often occurs in adolescence as a result of egocentrism.

To learn more about egocentrism refer to the link;

https://brainly.com/question/8019937

Answer:

got it right⬇️✅