4. What reagent would you predict to be in excess for reacting 7.50 mL of a 0.10M BaCl2 solution with 7.50 mL of 0.10M KIO3 solution

Answer:

I think it's A and D

Explanation:

I'm not sure if it's right

Answer:

The answer is B and D

Explanation:

trust fr

The correct answer is Migrating farther into the sea

Explanation:

The Adálie penguins rely on ice sheets to obtain food as the krill they feed on is only found underside of the ice. This implies as the Antarctic sea ice melts Adálie penguins need to look for new places to find krill as if there are no ice sheets there are no krill for these penguins. Due to this, it is likely these penguins are forced to migrate or move farther into the sea to survive because it is likely in these zones there are ice sheets and therefore places where they can find krill. Despite this, this process might lead to a significant decline in the population of penguins due to the competence for food and the process of migration itself. Thus, the one that would help Adáline penguins to survive during the melting of Antarctic sea ice is migrating farther into the sea.

Have a nice day!   :)

The Adálie penguins feed on krill that live on the underside of ice sheets. Adálie penguins survive during the melting of Antarctic sea ice help migrating farther into the sea. Therefore, option A is correct.

The term migration is defined as the movement of either people or animals from one area to another.

The Adálie penguins rely on ice sheets for food because the krill they eat is only found on the underside of the ice. As a result, it is likely that these penguins are forced to migrate or move further into the sea to survive.

Regardless, this process may result in a significant decline in penguin population due to food competence and the migration process itself.Thus, the one that will assist Adáline penguins in surviving during the melting of Antarctic sea ice is migrating deeper into the sea.

To learn more about the migration, follow the link;

https://brainly.com/question/28827966

#SPJ2

Your question is incomplete,most probably your question was

The Adálie penguins feed on krill that live on the underside of ice sheets. Which of the following would help Adálie penguins survive during the melting of Antarctic sea ice? Migrating farther into the sea Breeding during summer months Growing strong toe nails to grip ice Spending more time raising their young

Answer:

PH = 4.0

Explanation:

We are given;

Ka1 = 8.9 × 10^(-8)

Ka2 = 1.0 × 10^(-19)

From the 2 values of K given above, we can see that Ka2 is far smaller than Ka1.

Thus, Positive hydrogen ion (H+) will be majorly formed from first dissociation which is Ka1.

Now, the breakdown of the H2S solution is;

H2S⇌[H+] + [HS−]

Thus;

Ka1 = [[H+] × [HS2^(-)]]/(H2S)

HS2^(-) also has a positive hydrogen ion.

Thus, we can rewrite as;

Ka1 = [[H+] × [H+]]/(H2S)

Ka1 = (H+)²/(H2S)

Concentration of H2S is given as 0.1M. Thus;

8.9 × 10^(-8) = (H+)²/0.1

(H+)² = 0.1 × 8.9 × 10^(-8)

(H+) = √(0.1 × 8.9 × 10^(-8))

(H+) = 0.00009433981

Now, PH is gotten from;

PH = -log (H+)

Thus;

PH = -log 0.00009433981

PH ≈ 4.0

Answer:

Mass = 23.232 g

Explanation:

Given data:

Mass of C₈H₁₈ = 7.58 g

Mass of CO₂ produced = ?

Solution:

Chemical equation:

2C₈H₁₈ + 25O₂      →     16CO₂ + 18H₂O

Number of moles of octane:

Number of  moles =  mass/molar mass

Number of moles = 7.58 g/ 114.23 g/mol

Number of moles = 0.066 mol

Now we will compare the moles of CO₂ with octane from balance chemical equation.

                  C₈H₁₈            :           CO₂

                       2              :              16

                 0.066             :           16/2×0.066 = 0.528

Mass of CO₂ produced:

Mass = number of moles × molar mass

Mass = 0.528 mol × 44 g/mol

Mass = 23.232 g

C – 19,9%, H – 2,2%, N – 11,6%, O – x%

[tex]M=120\frac{g}{mol}[/tex]

1 percentage

The entire molecule is 100% and all the components of the compound add up to 100%.

100% - 19,9% - 2,5% - 11,6% = 66,1%

The compound contains 66,1% oxygen.

2 molar masses

[tex]M_{C}=12,01\frac{g}{mol}[/tex]

[tex]M_{H}=1,008\frac{g}{mol}[/tex]

[tex]M_{O}=15,999\frac{g}{mol}[/tex]

[tex]M_{N}=14,007\frac{g}{mol}[/tex]

3 masses

The compound has a molar mass of 120g/mol. So one molecule weighs 120 g. To find out how much the percentage of a component weighs, you have to calculate it using the molar mass.

carbon

19,8% of 120g

[tex]m=120g*0,198\\m=23,76g[/tex]

One molecule contains 23,76g of carbon.

hydrogen

2,5% of 120g

[tex]m=120g*0,025\\m=3g[/tex]

One molecule contains 3g of hydrogen.

oxygen

66,1% of 120g

[tex]m=120g*0,661\\m=79,32g[/tex]

One molecule contains 79,32g of oxygen.

nitrogen

11,6% of 120g

[tex]m=120g*0,0,116\\m=13,92g[/tex]

One molecule contains 13,92g of nitrogen.

4 amount of substance

carbon

[tex]n=\frac{23,76g}{12,01\frac{g}{mol} }\\n=1,98mol[/tex]

The compound contains about 2 moles of carbon.

hydrogen

[tex]n=\frac{3g}{1\frac{g}{mol} }\\n=3mol[/tex]

The compound contains about 3 moles of hydrogen.

oxygen

[tex]n=\frac{79,32g}{15,999\frac{g}{mol} }\\n=4,96mol[/tex]

The compound contains about 5 moles of oxygen.

nitrogen

[tex]n=\frac{13,92g}{14,007\frac{g}{mol} }\\n=0,99mol[/tex]

The compound contains about 1 moles of nitrogen.

5. molecular formula

The formula results from the ratio of the amounts of substance.

[tex]n_{C} :n_{H} :n_{O} :n_{N} =2:3:5:1\\C_{2}H_{3}NO_{5}[/tex]

The molecular formula of the given compound is C₂H₃NO₅, and percent composition of oxygen in it is 66.1%.

Mass of any composition of any compound will be calculated by using the below formula as:

Mass of component = (% composition)×(mass of compound) / 100

Given mass of compound = 120g/mol

Total composition of compound (100%) = Percent composition of all components

% composition of oxygen = 100 - (19.8 + 2.50 + 11.6) = 66.1%

Moles will be calculated as:

n = W/M, where

W = given mass

M = molar mass

Mass of Carbon component = (0.198)(120g) = 23.76g

Moles of Carbon atom = 23.76g / 12.01g/mol = 1.98mol = 2 moles

Mass of Nitrogen component = (0.116)(120g) = 13.92g

Moles of Nitrogen atom = 13.92g / 14.007g/mol = 0.99mol = 1 moles

Mass of Oxygen component = (0.661)(120g) = 79.32g

Moles of Oxygen atom = 79.32g / 15.99g/mol = 4.96mol = 5 moles

Mass of Hydrogen component = (0.025)(120g) = 3g

Moles of Hydrogen atom = 3g / 1g/mol = 3 moles

So, the molecular formula of the compound on the basis of moles of given entities is C₂H₃NO₅.

Hence required molecular formula is C₂H₃NO₅.

To know more about emperical formula, visit the below link:
https://brainly.com/question/1603500

Answer:

4.22mL

Explanation:

V=m/d

v= 18.45g/4.37g/mL

Complete Question

You are given a solution containing a pair of enantiomers (A and B). Careful measurements show that the solution contains 98% A and 2% B. What is the enantiomeric excess?

Answer:

The value is  [tex]k  = 96 %[/tex]

Explanation:

From the question we are told that

   The  percentage of  enantiomer A is  A =  98%

    The  percentage of  enantiomer B is  B =  2%

Generally the enantiomeric excess is mathematically represented as

      [tex]k  =  \frac{A -B}{A+B}  *  100[/tex]

=>   [tex]k  =  \frac{98 -2}{98+2}  *  100[/tex]

=>   [tex]k  = 96 %[/tex]

Answer:

5Ns

momentum= mass *velocity

=1*5

=5Ns

Answer:

ejeb094

Explanation:

nnb3neneie9eei rje

Answer:

Explanation:

Out of aspirin, acetaminophen and caffeine, aspirin is an acid because it is acetyl saliciylic acid . Hence it can be tested with litmus paper .

acetaminophen contains phenolic functional group , hence it is a weak acid . It can be tested with any test with which phenol test are done,  like with neutral solution of ferric chloride .

caffeine is weak basic substance . It can also be tested with the help of testing a basic substance .

Answer:

b. No

Explanation:

The question above is related to "The Law of Conservation of Mass." This law states that mass is neither created nor can it be destroyed. Even if a particular matter will be mixed with another substance or it undergoes chemical reaction, the mass of the matter will remain the same. Even with a change in phase, the mass of the matter will remain the same.

Answer:

outer electrons

Explanation:

Answer:

Energy levels

Explanation:

Answer:

3.13%.

Explanation:

The following data were obtained from the question:

Original amount (N₀) = 0.15

Half life (t½) = 2 mins

Number of half-life (n) = 5

Fraction of sample remaining =.?

Next, we shall determine the amount remaining (N) after 5 half-life. This can be obtained as follow:

Amount remaining (N) = 1/2ⁿ × original amount (N₀)

NOTE: n is the number of half-life.

N = 1/2ⁿ × N₀

N = 1/2⁵ × 0.15

N = 1/32 × 0.15

N = 0.15/32

N = 4.69×10¯³

Therefore, 4.69×10¯³ is remaining after 5 half-life.

Finally, we shall the fraction of the sample remaining after 5 half-life as follow:

Original amount (N₀) = 0.15

Amount remaining (N) = 4.69×10¯³

Fraction remaining = N/N₀ × 100

Fraction remaining = 4.69×10¯³/0.15 × 100

Fraction remaining = 3.13%

Answer:

15.2mL of the 0.10M sodium formate solution and 4.8mL of the 0.10M formic acid solution.

Explanation:

To find the pH of a buffer based on the concentration of the acid and conjugate base we must use Henderson-Hasselbalch equation:

pH = pKa + log [A⁻] / [HA]

Where [A⁻] could be taken as moles of the sodium formate and [HA] moles of the formic acid

4.25 = 3.75 + log [A⁻] / [HA]

0.5 = log [A⁻] / [HA]

3.162 = [A⁻] / [HA] (1)

As both solutions are 0.10M and you want to create 20mL of the buffer, the moles are:

0.10M  * 20x10⁻³L =

2x10⁻³moles = [A⁻] + [HA] (2)

Replacing (2) in (1):

3.162 = 2x10⁻³moles - [HA] / [HA]

3.162 [HA] = 2x10⁻³moles - [HA]

4.162[HA] = 2x10⁻³moles

[HA] = 4.805x10⁻⁴ moles

[A⁻] = 2x10⁻³moles - 4.805x10⁻⁴ moles = 1.5195x10⁻³moles

That means, to create the buffer you must add:

[A⁻] = 1.5195x10⁻³moles * (1L / 0.10mol) = 0.0152L =

[HA] = 4.805x10⁻⁴ moles * (1L / 0.10mol) = 0.0048L =

Answer:

I literally got this from google.

Explanation:

In ordinary air, sodium metal reacts to form a sodium hydroxide film, which can rapidly absorb carbon dioxide from the air, forming sodium bicarbonate. ... In a comparatively dry atmosphere, sodium burns quietly, giving off a dense white caustic smoke, which can cause choking and coughing.

Happy almost Halloween! :)

Answer:

2,2,3- trimethylhexane because it has more carbon atoms than pentane.

Explanation:

Hello.

In this case, since the physical properties of organic compounds are intensified as the number of carbon atoms start increasing on it, the larger the amount of carbon atom, the higher the boiling point since more energy is required to allow the liquid-phase molecules to transcend to the vapor-phase.

In such a way, since pentane has five carbon atoms and 2,2,3- trimethylhexane has nine carbon atoms, 2,2,3- trimethylhexane has the highest boiling point.

Best regards.

Answer:

The energy of each transition is approximately [tex]1.98\times 10^{-19}\; \rm J[/tex].

The frequency of photons released in such transitions is approximately [tex]3.00\times 10^{14}\; \rm Hz[/tex].

Explanation:

The Rydberg Equation gives the wavelength (in vacuum) of photons released when the electron of a hydrogen atom transitions from one main energy level to a lower one.

The Rydberg Equation gives the following relation:

[tex]\displaystyle \frac{1}{\lambda_\text{vac}} = R_\text{H} \cdot \left(\frac{1}{{n_2}^2}} -\frac{1}{{n_1}^2}\right)[/tex].

Rearrange to obtain and expression for [tex]\lambda_\text{vac}[/tex]:

[tex]\displaystyle \lambda_\text{vac} = \frac{1}{\displaystyle R_\text{H}\cdot \left(\frac{1}{{n_2}^2} - \frac{1}{{n_1}^2}\right)}[/tex].

In this question, [tex]n_1 = 7[/tex] while [tex]n_2 = 3[/tex]. Therefore:

[tex]\begin{aligned} \lambda_\text{vac} &= \frac{1}{\displaystyle R_\text{H}\cdot \left(\frac{1}{{n_2}^2} - \frac{1}{{n_1}^2}\right)} \\ &\approx \frac{1}{\displaystyle 1.09678 \times 10^{7}\; \rm m^{-1} \cdot \left(\frac{1}{3^2} - \frac{1}{7^2}\right)} \approx 1.0 \times 10^{-6}\; \rm m \end{aligned}[/tex].

Note, that [tex]1.0\times 10^{-6}\; \rm m[/tex] is equivalent to [tex]1000\; \rm nm[/tex]. That is: [tex]1.0\times 10^{-6}\; \rm m = 1000\; \rm nm[/tex].

Look up the speed of light in vacuum: [tex]c \approx 3.00\times 10^{8}\; \rm m \cdot s^{-1}[/tex]. Calculate the frequency of this photon:

[tex]\begin{aligned} f &= \frac{c}{\lambda_\text{vac}} \\ &\approx \frac{3.00\times 10^{8}\; \rm m\cdot s^{-1}}{1.0\times 10^{-6}\; \rm m} \approx 3.00 \times 10^{14}\; \rm Hz\end{aligned}[/tex].

Let [tex]h[/tex] represent Planck constant. The energy of a photon of wavelength [tex]f[/tex] would be [tex]E = h \cdot f[/tex].

Look up the Planck constant: [tex]h \approx 6.62607 \times 10^{-34}\; \rm J \cdot s[/tex]. With a frequency of [tex]3.00\times 10^{14}\; \rm Hz[/tex] ([tex]1\; \rm Hz = 1\; \rm s^{-1}[/tex],) the energy of each photon released in this transition would be:

[tex]\begin{aligned}E &= h \cdot f \\ &\approx 6.62607 \times 10^{-34}\; \rm J\cdot s^{-1} \times 3.00 \times 10^{14}\; \rm s^{-1} \\ &\approx 1.98 \times 10^{-19}\; \rm J\end{aligned}[/tex].

The energy of the transition between n = 7 and n = 3  is 1.96 × 10^-19 J while the frequency is 3 × 10^14 Hz.

Using the Rydberg Equation for energy;

ΔE = -RH(1/n^2final - 1/n^2initial)

Given that;

nfinal = 3

ninitial = 7

RH = 2.18 × 10^-18 J

ΔE = - 2.18 × 10^-18(1/3^2 - 1/7^2)

ΔE = - 2.18 × 10^-18(0.11 - 0.02)

ΔE = - 1.96 × 10^-19 J

For the second part;

Since the wavelength is 1000nm, we have;

λ = 1000nm

c = 3 × 10^8 m/s

f = ?

c = λf

f = c/λ

f = 3 × 10^8 m/s/1000 × 10^-9 m

f = 3 × 10^8 m/s/ 1 × 10^-6 m

f = 3 × 10^14 Hz

Learn more: https://brainly.com/question/18415575

Answer:

Explanation:

Iodine is the most flexible of the atoms in Group 17 of the periodic table. It can have more than 1 charge, especially when combined with oxygen. The answer that you are expected to give, I think is C. Iodine's dominant charge is - 1

Answer:

A) enthalpy of reaction

Explanation:

The region C signifies the enthalpy of reaction.

This diagram is the energy profile of an endothermic reaction. In such reaction, heat is absorbed from the surrounding. At the end of the reaction, the heat of product is lesser than that of the reactants.

it is indeed A) enthalpy of reaction

Answer:

Explanation:

NaNO₃  = Na⁺  + NO₃⁻¹

.497 M                 .497 M

moles of NO₃⁻¹ = .897 x .497 = .4458 moles

Ca( NO₃)₂  = Ca + 2 NO₃⁻¹

.341 M                    2 x .341 M = .682 M

moles of NO₃⁻¹ = .813 x .682 = .5544 moles

Total moles =  .4458 moles  +  .5544 moles

= 1.0002 moles

volume of solution = 897 + 813 = 1710 mL

= 1.710 L

concentration of nitrate ion = 1.0002 / 1.710 M

= .585 M

Answer:

the second answer its science behind it

Answer:

b

Explanation:

Answer:

[H+] = 7.576x10⁻⁴M

pH = 3.12

Explanation:

Based on the equilibrium of the nicotinic acid in water:

HC6H4NO2(aq) + H2O(l) ⇄ C6H4NO2-(aq) + H3O+(aq)

Ka = [C6H4NO2-] [H3O+] / [HC6H4NO2]

As both C6H4NO2-(aq) and H3O+(aq) comes from the same equilibrium, we can approximate their concentration as X and replace:

Ka = [C6H4NO2-] [H3O+] / [HC6H4NO2]

1.4x10⁻⁵ = [X] [X] / [0.041M]

5.47x10⁻⁷ = X²

And as pH is defined as -log [H⁺]

Answer:

1) 97.6%

2) No the purity is not acceptable because the standard is 99.5% purity.

3) Yes I will repeat the titration experiment to confirm my result.

Explanation:

Equation of the reaction;

C7H6O2(aq) + NaOH(aq) ---------> C7H5ONa(aq) + H2O(aq)

From the information provided;

Number of moles of NaOH reacted = concentration × volume = 20.15/1000 × 0.500 = 0.01 moles

From the reaction equation;

1 mole of C7H6O2 reacts with 1 mole of NaOH

Hence 0.01 moles of C7H6O2 will react with 0.01 moles of NaOH

Mass of C7H6O2 reacted = number of moles of C7H6O2 × molar mass of C7H6O2

Molar mass of C7H6O2 = 122.12 g/mol

Mass of C7H6O2 reacted = 0.01 moles × 122.12 g/mol = 1.22 g

Percentage by mass of pure C7H6O2 in the impure sample = 1.22/1.250 × 100 = 97.6 %

Answer:

CHO

Explanation:

Carbon = 41%,  Hydrogen = 4.58%, oxygen = 54.6%

Step 1:

Divide through by their respective relative atomic masses

41/ 12,         4.58/1,         54.6/16

3.41              4.58            3.41

Step 2:

Divide by the lowest ratio:

3.41/3.41,      4.58/3.41,     3.41/3.41

1,                    1,                  1

Hence the empirical formula is CHO

Answer:

The empirical formula of X is C3H4O3.

Explanation:

Answer:

polar bonds are caused by different kind of atoms, because almost every atoms have different powers to attract electrons.

the answer will be the two same atoms, F2